Usb-c fehler beim hot-plug

Hi zusammen,

ich habe ein Tuxedo InfinityBook Pro 16 Gen8.

An der rechten Seite befindet sich ein Thunderbolt-4-Port, der direkt mit der Intel-GPU verbunden ist. Bevor ich ein Kernel-Update durchgeführt hatte, konnte ich problemlos zwischen meinen PCs hin- und herschalten per KVM switch. Seit dem Update funktioniert das jedoch nicht mehr: Das Notebook kann das Display nicht mehr ansteuern und erkennt am Port auch kein DisplayPort-Signal mehr aber noch andere usb-c medien. Erst nach einem Neustart wird das Display wieder erkannt.

Viele Grüße

System:
  Kernel: 6.12.4-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.12-x86_64
    root=UUID=5b401a6b-3615-41cd-88f2-289b8f80b914 rw rootflags=subvol=@ quiet
    cryptdevice=UUID=4cb2f401-fa85-4e7a-a1de-e70f880ca646:luks-4cb2f401-fa85-4e7a-a1de-e70f880ca646
    root=/dev/mapper/luks-4cb2f401-fa85-4e7a-a1de-e70f880ca646 splash
    udev.log_priority=3 usbcore.autosuspend=-1
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.43 wm: xfwm4 v: 4.18.0
    with: xfce4-panel tools: xfce4-screensaver dm: LightDM v: 1.32.0
    Distro: Manjaro base: Arch Linux
Machine:
  Type: Laptop System: TUXEDO product: TUXEDO InfinityBook Pro Gen8 (MK2)
    v: Standard serial: <filter>
  Mobo: NB02 model: PH4PG31 v: Standard serial: <filter> part-nu: IBP1XI08MK1
    uuid: 3eeaaf80-fc7e-11ed-8859-f3b918ea1b00 UEFI: American Megatrends LLC.
    v: N.1.10A13 date: 05/24/2024
Battery:
  ID-1: BAT0 charge: 82.1 Wh (100.0%) condition: 82.1/82.1 Wh (100.0%)
    volts: 16.8 min: 15.5 model: standard type: Li-ion serial: <filter>
    status: full
  Device-1: hidpp_battery_0 model: Logitech MX Keys Wireless Keyboard
    serial: <filter> charge: 55% (should be ignored) rechargeable: yes
    status: discharging
Memory:
  System RAM: total: 32 GiB available: 31.11 GiB used: 6.79 GiB (21.8%)
    igpu: 60 MiB
  Array-1: capacity: 64 GiB slots: 2 modules: 2 EC: None
    max-module-size: 32 GiB note: est.
  Device-1: Controller0-ChannelA-DIMM0 type: DDR5 detail: synchronous
    size: 16 GiB speed: 4800 MT/s volts: curr: 1.1 min: 1.1 max: 1.1
    width (bits): data: 64 total: 64 manufacturer: Crucial Technology
    part-no: CT16G48C40S5.C8A1 serial: <filter>
  Device-2: Controller1-ChannelA-DIMM0 type: DDR5 detail: synchronous
    size: 16 GiB speed: 4800 MT/s volts: curr: 1.1 min: 1.1 max: 1.1
    width (bits): data: 64 total: 64 manufacturer: Crucial Technology
    part-no: CT16G48C40S5.C8A1 serial: <filter>
PCI Slots:
  Slot: 1 type: PCIe status: available length: short volts: 3.3 bus-ID: 00:00.0
  Slot: 1 type: PCIe status: available length: short volts: 3.3
    bus-ID: 00:00.0
  Slot: 1 type: PCIe status: available length: short volts: 3.3
    bus-ID: 00:00.0
  Slot: 1 type: PCIe status: available length: short volts: 3.3
    bus-ID: 00:00.0
  Slot: 1 type: PCIe status: available length: short volts: 3.3
    bus-ID: 00:00.0
CPU:
  Info: model: 13th Gen Intel Core i7-13700H socket: BGA1744 (U3E1) note: check
    bits: 64 type: MST AMCP arch: Raptor Lake gen: core 13 level: v3 note: check
    built: 2022+ process: Intel 7 (10nm) family: 6 model-id: 0xBA (186)
    stepping: 2 microcode: 0x4123
  Topology: cpus: 1x dies: 1 clusters: 8 cores: 14 threads: 20 mt: 6 tpc: 2
    st: 8 smt: enabled cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32
    KiB, 8x64 KiB L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB
    desc: 1x24 MiB
  Speed (MHz): avg: 652 min/max: 400/4800:5000:3700 base/boost: 2376/5000
    scaling: driver: intel_pstate governor: powersave volts: 0.9 V
    ext-clock: 100 MHz cores: 1: 652 2: 652 3: 652 4: 652 5: 652 6: 652 7: 652
    8: 652 9: 652 10: 652 11: 652 12: 652 13: 652 14: 652 15: 652 16: 652
    17: 652 18: 652 19: 652 20: 652 bogomips: 116780
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
    bts clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16 cx8
    de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
    flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp hwp_act_window
    hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt ida intel_pt
    invpcid lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b movdiri
    msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pclmulqdq pdcm pdpe1gb pebs
    pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed rdtscp rep_good
    sdbg sep serialize sha_ni smap smep smx split_lock_detect ss ssbd sse sse2
    sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
    tsc_deadline_timer tsc_known_freq umip user_shstk vaes vme vmx vnmi
    vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave xsavec xsaveopt xsaves
    xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling mitigation: Clear Register File
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional;
    RSB filling; PBRSB-eIBRS: SW sequence; BHI: BHI_DIS_S
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: AIstone Global
    driver: i915 v: kernel alternate: xe arch: Gen-13 process: Intel 7 (10nm)
    built: 2022+ ports: active: DP-1,eDP-1 empty: DP-2,HDMI-A-1 bus-ID: 00:02.0
    chip-ID: 8086:a7a0 class-ID: 0300
  Device-2: Logitech StreamCam
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3.3:8 chip-ID: 046d:0893
    class-ID: 0300 serial: <filter>
  Display: x11 server: X.org v: 1.21.1.14 compositor: xfwm4 v: 4.18.0 driver:
    X: loaded: modesetting alternate: fbdev,vesa dri: iris gpu: i915
    display-ID: :0.0 note: <missing: xdpyinfo/xrandr>
  Monitor-1: DP-1 model: AOC U34G2G1 serial: <filter> built: 2020
    res: 3440x1440 dpi: 110 gamma: 1.2 chroma: red: x: 0.678 y: 0.310 green:
    x: 0.278 y: 0.639 blue: x: 0.149 y: 0.071 white: x: 0.314 y: 0.329
    size: 797x334mm (31.38x13.15") diag: 864mm (34") modes: 3440x1440,
    2560x1080, 1720x1440, 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x720,
    1024x768, 832x624, 800x600, 720x576, 720x480, 640x480, 720x400
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 89 2: parse_edid:
    unhandled CEA mode 90
  Monitor-2: eDP-1 model: BOE Display 0x0a3b built: 2021 res: 2560x1600
    dpi: 189 gamma: 1.2 chroma: red: x: 0.647 y: 0.325 green: x: 0.290 y: 0.620
    blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329
    size: 344x215mm (13.54x8.46") diag: 406mm (16") ratio: 16:10
    modes: 2560x1600
  EDID-Warnings: 1: parse_edid: unknown tag 112
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris x11: drv: iris
    inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.2.8-arch1.1
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (RPL-P)
    device-ID: 8086:a7a0 memory: 15.19 GiB unified: yes
Audio:
  Device-1: Sennheiser GmbH & KG Profile driver: snd-usb-audio type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-3.2:7 chip-ID: 1377:1100
    class-ID: 0102 serial: <filter>
  Device-2: Logitech StreamCam
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3.3:8 chip-ID: 046d:0893
    class-ID: 0300 serial: <filter>
  API: ALSA v: k6.12.4-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.2.7 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:51f1 class-ID: 0280
  IF: wlo1 state: down mac: <filter>
  Device-2: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB
    rev: 3.0 speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 4-1:2
    chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
  IF: enp0s20f0u1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: docker0 state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-2: wg0 state: unknown speed: N/A duplex: N/A mac: N/A
  IP v4: <filter> scope: global
  Info: services: NetworkManager,systemd-timesyncd
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:6 chip-ID: 8087:0026
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
  Device-1: crypt_home maj-min: 254:1 type: LUKS dm: dm-1 size: 931.5 GiB
  Components:
  p-1: nvme1n1p1 maj-min: 259:1 size: 931.51 GiB
  Device-2: luks-4cb2f401-fa85-4e7a-a1de-e70f880ca646 maj-min: 254:0
    type: LUKS dm: dm-0 size: 931.21 GiB
  Components:
  p-1: nvme0n1p2 maj-min: 259:4 size: 931.22 GiB
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.82 TiB used: 86.28 GiB (4.6%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:2 vendor: Samsung model: SSD 980 PRO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 5B2QGXA7 temp: 28.9 C
    scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 5B2QGXA7 temp: 29.9 C
    scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.21 GiB size: 931.21 GiB (100.00%)
    used: 24.68 GiB (2.7%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
    maj-min: 254:0 mapped: luks-4cb2f401-fa85-4e7a-a1de-e70f880ca646 label: N/A
    uuid: 5b401a6b-3615-41cd-88f2-289b8f80b914
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 728 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:3 label: N/A uuid: ABB2-A7C2
  ID-3: /home raw-size: 931.5 GiB size: 931.5 GiB (100.00%)
    used: 61.6 GiB (6.6%) fs: btrfs block-size: 4096 B dev: /dev/dm-1
    maj-min: 254:1 mapped: crypt_home label: N/A uuid: N/A
  ID-4: /var/cache raw-size: 931.21 GiB size: 931.21 GiB (100.00%)
    used: 24.68 GiB (2.7%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
    maj-min: 254:0 mapped: luks-4cb2f401-fa85-4e7a-a1de-e70f880ca646 label: N/A
    uuid: 5b401a6b-3615-41cd-88f2-289b8f80b914
  ID-5: /var/log raw-size: 931.21 GiB size: 931.21 GiB (100.00%)
    used: 24.68 GiB (2.7%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
    maj-min: 254:0 mapped: luks-4cb2f401-fa85-4e7a-a1de-e70f880ca646 label: N/A
    uuid: 5b401a6b-3615-41cd-88f2-289b8f80b914
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.1
    speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 3-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
    chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 3-1.2:4 info: Logitech G502 Mouse type: mouse,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c07d class-ID: 0300
    serial: <filter>
  Device-2: 3-1.3:5 info: Logitech Unifying Receiver type: keyboard,mouse,HID
    driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
    chip-ID: 046d:c52b class-ID: 0300
  Hub-5: 3-3:3 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2109:2817
    class-ID: 0900
  Device-1: 3-3.2:7 info: Sennheiser GmbH & KG Profile type: audio
    driver: snd-usb-audio interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 100mA chip-ID: 1377:1100 class-ID: 0102
    serial: <filter>
  Device-2: 3-3.3:8 info: Logitech StreamCam type: video,audio,HID
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo interfaces: 6 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 046d:0893 class-ID: 0300 serial: <filter>
  Device-3: 3-10:6 info: Intel AX201 Bluetooth type: bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 100mA chip-ID: 8087:0026 class-ID: e001
  Hub-6: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 4-1:2 info: Realtek RTL8153 Gigabit Ethernet Adapter
    type: Network driver: r8152 interfaces: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 288mA
    chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
  Hub-7: 4-2:3 info: Genesys Logic Hub ports: 4 rev: 3.2
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 05e3:0626
    class-ID: 0900
  Hub-8: 4-4:4 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.1
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2109:0817
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 41.8 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: pacman pkgs: 1223 libs: 355 tools: pamac
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://ipng.mm.fcix.net/manjaro/stable/$repo/$arch
    2: https://mirrors.dotsrc.org/manjaro/stable/$repo/$arch
    3: https://coresite.mm.fcix.net/manjaro/stable/$repo/$arch
    4: https://edgeuno-bog2.mm.fcix.net/manjaro/stable/$repo/$arch
    5: https://gsl-syd.mm.fcix.net/manjaro/stable/$repo/$arch
    6: https://mirror.2degrees.nz/manjaro/stable/$repo/$arch
    7: https://mirrors.sjtug.sjtu.edu.cn/manjaro/stable/$repo/$arch
Processes:
  CPU top: 5 of 449
  1: cpu: 27.1% command: firefox pid: 4493 mem: 669.7 MiB (2.1%)
  2: cpu: 18.2% command: teams-for-linux pid: 5576 mem: 1028.2 MiB (3.2%)
  3: cpu: 12.0% command: teamspeak pid: 35075 mem: 313.1 MiB (0.9%)
  4: cpu: 9.6% command: Xorg pid: 1486 mem: 142.1 MiB (0.4%)
  5: cpu: 6.8% command: pavucontrol pid: 37130 mem: 215.7 MiB (0.6%)
  Memory top: 5 of 449
  1: mem: 1028.2 MiB (3.2%) command: teams-for-linux pid: 5576 cpu: 18.2%
  2: mem: 729.7 MiB (2.2%) command: remmina pid: 35927 cpu: 1.4%
  3: mem: 669.7 MiB (2.1%) command: firefox pid: 4493 cpu: 27.1%
  4: mem: 510.5 MiB (1.6%) command: firefox pid: 17579 cpu: 3.2%
  5: mem: 409.6 MiB (1.2%) command: firefox pid: 14913 cpu: 4.2%
Info:
  Processes: 449 Power: uptime: 1h 25m states: freeze,mem,disk suspend: s2idle
    avail: deep wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend,
    test_resume image: 12.43 GiB services: upowerd,xfce4-power-manager
    Init: systemd v: 256 default: graphical tool: systemctl
  Compilers: gcc: 14.2.1 Shell: Sudo (sudo) v: 1.9.16p2 default: Bash
    v: 5.2.37 running-in: tmux: inxi: 3.3.36

Welcome to Manjaro! :smiling_face_with_three_hearts:

  1. Please read the information behind this link. It will help you to post necessary information.
  1. Please press the 3 dots below your post and then press the :pencil2:
  • If you give us information about your system, we can see what we’re talking about and make better suggestions.
  • You can do this by using inxi in a terminal or in console.
sudo inxi --verbosity=8 --filter --width 
  • Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
  • Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.
  1. Copy the output from inxi (including the command) and paste it into your post.
  • To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.
  1. Or we can try to play hide and seek :wink:
    Have you already :mag: for your problem in the forum ? (Wisdom lies in asking → listening → reading :wink: )

Google ist dein Freund und übersetzt dir das.
Google est votre ami et le traduira pour vous.


inxi may be especially usefull to inform the programmers of the problem (and the related chip)
:footprints:

Hi @andreas85 habe das so editiert sry hätt ich selbst drauf kommen müssen :smiley:

1 Like

Jetzt brauchen wir nur noch auf jemanden zu warten, der sich damit auskennt :wink:

Hi,

ich habe meine Suche anscheinend zu tief angesetzt.
Das Problem hatte seinen Ursprung in einer kaputten display.xml von XFCE im Home-Verzeichnis.

Nachdem ich diese gelöscht und eine neue erstellt habe, funktioniert alles wieder einwandfrei.

Viele Grüße

1 Like

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.