Updating causing issues

[Mirdarthos]

@sea

mkdir /tmp/chroot
mount /dev/<your device> /tmp/chroot  || OR: mount /dev/disk/by-uuid/<according GUUID>
chroot /tmp/chroot

With Manjaro and manjaro-chroot these step are unnecessary, as well as these:

@sea

\# now within the chroot
mount /dev/<device of UEFI of SSD>   /boot/efi  || OR: mount /dev/disk/by-uuid/<according GUUID of SSD-UEFI>    /boot/efi
grub-mkconfig -o /boot/grub/grub.cfg

Manjaro is that awesome yeah!

Edit:

The same steps, or no, the same end result:

1. Ensure you’ve got a relatively new ISO or at least one with an LTS kernel.

2. Write/copy/dd the ISO to a USB thumb drive.

3. When done, boot with the above mentioned USB thumb drive into the live environment.

4. Once booted, open a terminal and enter the following command to enter the chroot environment:

manjaro-chroot -a

5. If you have more than one Linux installation, select the correct one to use from the list provided.

When done, you should now be in the chroot environment.

But, be careful, as you’re now in an actual root environment on your computer, so any changes you make will persist after a restart.

Once in the live environment, you have to reinstall GRUB. To do so, run the following:

update-grub

When successfully completed, exit the chroot environment:

exit

Followed by rebooting and seeing if it worked.

If it did, feel free to heap on the praise. If, however, it didn’t, well, then I’m not here. (Mostly, I suspect, I’ll have to be off then.)