Trying to install RawTherapee : Update Woes ! Not updated for a while and lots of dependencies problems

Support Software & Applications
1

I want To install RAW Therapee and when I try to I get an error message :

Failed to generate gcc11-libs information

I’ve read elsewhere on here that the solution is to remove gcc11-libs and gcc11, and then to update.
When I try to delete them I get the same message.

I have to admit that I don’t update regularly: at the minute there are 1252 updates at 9.2GB available.

but i cannot update and now cannot add new software.

Any help greatly appreciated !

Here’s Inxi if that helps :

System:
  Kernel: 6.0.14-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.0-x86_64
    root=UUID=17480e2f-6383-4189-8c7d-ca2681b5aefd rw quiet apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: KDE Plasma v: 5.26.4 tk: Qt v: 5.15.7 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: M5A97 R2.0 v: Rev 1.xx
    serial: <superuser required> BIOS: American Megatrends v: 2603
    date: 06/26/2015
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 15.52 GiB used: 4.03 GiB (26.0%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD FX-6350 bits: 64 type: MT MCP arch: Piledriver level: v2
    built: 2012-13 process: GF 32nm family: 0x15 (21) model-id: 2 stepping: 0
    microcode: 0x6000852
  Topology: cpus: 1x cores: 6 smt: enabled cache: L1: 288 KiB
    desc: d-6x16 KiB; i-3x64 KiB L2: 6 MiB desc: 3x2 MiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1431 high: 1582 min/max: 1400/3900 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1404 2: 1400
    3: 1582 4: 1400 5: 1400 6: 1400 bogomips: 46975
  Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 clflush cmov
    cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists
    extapic extd_apicid f16c flushbyasid fma fma4 fpu fxsr fxsr_opt ht
    hw_pstate ibpb ibs lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor
    msr mtrr nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw pae pat
    pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni
    popcnt pse pse36 rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2
    sse4a ssse3 svm svm_lock syscall tbm tce topoext tsc tsc_scale vmcb_clean
    vme vmmcall wdt xop xsave
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
    disabled, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GP104 [GeForce GTX 1070] vendor: eVga.com. driver: nvidia
    v: 525.60.11 alternate: nouveau,nvidia_drm non-free: 525.xx+
    status: current (as of 2022-12) arch: Pascal code: GP10x process: TSMC 16nm
    built: 2016-21 pcie: gen: 2 speed: 5 GT/s lanes: 16 bus-ID: 01:00.0
    chip-ID: 10de:1b81 class-ID: 0300
  Device-2: Logitech Webcam C310 type: USB driver: snd-usb-audio,uvcvideo
    bus-ID: 1-5.3:5 chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 21.1.6 compositor: kwin_x11 driver: N/A
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x2160 s-dpi: 157 s-size: 621x341mm (24.45x13.43")
    s-diag: 708mm (27.89")
  Monitor-1: HDMI-0 res: 3840x2160 hz: 60 dpi: 157
    size: 621x341mm (24.45x13.43") diag: 708mm (27.89") modes: N/A
  API: OpenGL v: 4.6.0 NVIDIA 525.60.11 renderer: NVIDIA GeForce GTX
    1070/PCIe/SSE2 direct render: Yes
Audio:
  Device-1: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel
    bus-ID: 1-5.3:5 v: kernel bus-ID: 00:14.2 chip-ID: 046d:081b class-ID: 0102
    chip-ID: 1002:4383 class-ID: 0403 serial: <filter>
  Device-2: NVIDIA GP104 High Definition Audio vendor: eVga.com.
    driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16
    bus-ID: 01:00.1 chip-ID: 10de:10f0 class-ID: 0403
  Device-3: Logitech Webcam C310 type: USB driver: snd-usb-audio,uvcvideo
  Sound API: ALSA v: k6.0.14-1-MANJARO running: yes
  Sound Server-1: JACK v: 1.9.21 running: no
  Sound Server-2: PulseAudio v: 16.1 running: yes
  Sound Server-3: PipeWire v: 0.3.63 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK P8 series driver: r8168 v: 8.050.03-NAPI modules: r8169 pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 02:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  Device-2: Realtek RTL8812AE 802.11ac PCIe Wireless Network Adapter
    vendor: ASUSTeK driver: rtl8821ae v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: c000 bus-ID: 05:00.0 chip-ID: 10ec:8812 class-ID: 0280
  IF: wlp5s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 2.94 TiB used: 296.25 GiB (9.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 QVO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 1B6Q scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Kingston model: SA400S37240G
    size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: J4.3 scheme: MBR
  ID-3: /dev/sdc maj-min: 8:32 vendor: Hitachi model: HDS721010CLA332
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
    type: HDD rpm: 7200 serial: <filter> rev: A3EA scheme: GPT
  ID-4: /dev/sdd maj-min: 8:48 model: SATA3 240GB SSD size: 223.57 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD
    serial: <filter> rev: 0A0 scheme: MBR
  ID-5: /dev/sdf maj-min: 8:80 vendor: Seagate model: ST3250820AS Q
    size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
    type: N/A serial: <filter> rev: E scheme: GPT
  ID-6: /dev/sdg maj-min: 8:96 vendor: Seagate model: ST3500620AS
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: <unknown>
    type: HDD rpm: 7200 serial: <filter> rev: HP21 scheme: MBR
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.51 GiB size: 915.81 GiB (98.31%)
    used: 167.69 GiB (18.3%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: 17480e2f-6383-4189-8c7d-ca2681b5aefd
  ID-2: /run/timeshift/2847/backup raw-size: N/A size: 463.73 GiB
    used: 128.56 GiB (27.7%) fs: btrfs dev: /dev/sde1 label: N/A uuid: N/A
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sdb1 maj-min: 8:17 size: 512 MiB fs: vfat label: N/A
    uuid: 993C-E256
  ID-2: /dev/sdb2 maj-min: 8:18 size: 1 KiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-3: /dev/sdb5 maj-min: 8:21 size: 223.07 GiB fs: ext4 label: N/A
    uuid: e03f1481-6694-465e-9597-1352991e2612
  ID-4: /dev/sdc1 maj-min: 8:33 size: 931.51 GiB fs: ntfs
    label: WIN LINUX SHARE 1TB uuid: 7D28ABF135B57E28
  ID-5: /dev/sdd1 maj-min: 8:49 size: 223 GiB fs: ntfs label: WIN10
    uuid: 01D6F7FD2E83E270
  ID-6: /dev/sdd2 maj-min: 8:50 size: 585 MiB fs: ntfs label: N/A
    uuid: 28E8365DE8362A08
  ID-7: /dev/sdf1 maj-min: 8:81 size: 200 MiB fs: vfat label: EFI
    uuid: 70D6-1701
  ID-8: /dev/sdf2 maj-min: 8:82 size: 232.57 GiB fs: ntfs label: WIN10-ONLY
    uuid: 3FDF7FE034CD88F6
  ID-9: /dev/sdg1 maj-min: 8:97 size: 463.73 GiB fs: btrfs label: TIMESHIFTS
    uuid: 083e92ef-2e41-468e-b990-9f2812062321
  ID-10: /dev/sdg2 maj-min: 8:98 size: 2 GiB fs: swap label: swapMX
    uuid: 04316724-de63-4ac9-bc52-c7c8ed434688
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 5 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-5:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 1a40:0101 class-ID: 0900
  Device-1: 1-5.1:3 info: Sunplus Innovation Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA
    chip-ID: 1bcf:0005 class-ID: 0301
  Device-2: 1-5.2:4 info: SteelSeries ApS Apex 3 TKL type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 5 rev: 2.0 speed: 12 Mb/s power: 400mA
    chip-ID: 1038:1622 class-ID: 0300
  Device-3: 1-5.3:5 info: Logitech Webcam C310 type: Video,Audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
    power: 500mA chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Hub-3: 1-5.4:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0608 class-ID: 0900
  Hub-4: 1-5.4.1:7 info: ASIX AX68004 ports: 7 rev: 1.0 speed: 12 Mb/s
    power: 100mA chip-ID: 0b95:6804 class-ID: 0900
  Hub-5: 2-0:1 info: Full speed or root hub ports: 5 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-6: 3-0:1 info: Full speed or root hub ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-7: 4-0:1 info: Full speed or root hub ports: 5 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Hub-8: 5-0:1 info: Full speed or root hub ports: 5 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Hub-9: 6-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Hub-10: 7-0:1 info: Full speed or root hub ports: 4 rev: 1.1 speed: 12 Mb/s
    chip-ID: 1d6b:0001 class-ID: 0900
  Hub-11: 8-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-12: 9-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-13: 10-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-14: 11-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 27.6 C mobo: N/A gpu: nvidia temp: 47 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Info:
  Processes: 223 Uptime: 36m wakeups: 0 Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 alt: 11 clang: 14.0.6 Packages: 1849
  pm: pacman pkgs: 1823 libs: 363 tools: pamac pm: flatpak pkgs: 14 pm: snap
  pkgs: 12 Shell: Zsh v: 5.9 default: Bash v: 5.1.16 running-in: konsole
  inxi: 3.3.24
2

One of the first things you need to do is boot into a supported kernel.

1 Like
3

I’m afraid your situation is not supported. Manjaro is a (curated) rolling-release distribution and must be kept up-to-date if you want to enjoy a perfectly working system, as well as any support from the helpful community of volunteers on this forum.

As such, there are three possible solutions to your problem… :arrow_down:

  1. Update your system and fix whatever dependency issues with the information available on the forum — which has a search function — and/or the Wiki;…

  2. Back up your user data — preferably to a separate drive — and reinstall Manjaro from a recent ISO; or…

  3. Switch to a point-release distribution that you only have to update once a year, such as Debian, Mint, Ubuntu, Mageia, et al.

1 Like
4

Besides installing a supported kernel as suggested by @cscs ,
I suggest you update your system before worrying about RAWTherapee.

sudo pacman-mirrors --fasttrack 10 && sudo pacman -Syyu
5

You are not up to date. You still have GCC 11 and we now have GCC 13. The 6.0 kernel has been EOL (End Of Life) for several months.

As others mentioned, update your system, install a supported kernel, reboot then remove linux60.

6

OK
Suitably admonished.

I’ve tried to update to Kernel 6.3 but there are conflicts with nvidia (what’s new)
I don’t really understand what the difference is in kernels - 6.3.1 , 6.3.1-RT or 6.4.0 Experimental

I’ll have a search in this forum before I bother anyone with my incompetence…

J3G

7

That should never happen unless your mirror(s) are out of date which can put you in an unsupported partial upgrade state.

Please post the log showing the conflicts.

8

I think i’m nearly sorted now… more by good luck than good judgement…

So now running Kernel Linux 6.3.1_rt13-1

I’ve installed Kernel Linux 6.3.5-2 , but when i try to reboot with that Kernel, my systems hangs at the black screen
[FAILED] Failed to start Remount Root and Kernel file systems

On Linux 6.3.1_rt13-1 it has the same screen - but then loads anyway…

now i’ll do my update - all 9Gb

1 Like
9

You deserve more credit than you allow yourself. It seems you’re actually learning things and progressing. :+1:

Luck is a false goddess. :wink: