Routers are very easy to log into unless something is blocking it on the computer side.You can also do a factory rest on the router then you will know if it’s the router or the computer side as the router will reset to default.
1 Like
but it will erase the password on the router and i currently can’t log in to apply a new one.
I might try disabling ufw and the vmware-networks service.
I’ve read every post in this thread.
@linub you haven’t yet posted any unadulterated outputs from the commands that others have asked of you.
Are you running Manjaro in a virtualized environment? What does VMware have anything to do with this?
EDIT: This is a case of “too much going on”.
UFW?
VMware systemd service?
Obscure D-Link router?
This comes off as a tangent to most plug-and-play setups.
nope
ip addr show|egrep /24
net 172.16.82.1/24 brd 172.16.82.255 scope global vmnet1
inet 192.168.108.1/24 brd 192.168.108.255 scope global vmnet8
Don’t filter the output.
If you need to “hide” a sensitive public IP, you can replace it with XXXXXX.
that’s all i got; 2 lines.
A simple solution would be boot your computer with a Manjaro live cd then find you ip address and log into the router with firefox.
1 Like
didn’t work.Thanks though.
Why did you use egrep then?
An IP address that starts with 10. might use a different mask.
Did your internet access work?
And what is the output from this command?:
nmcli device show|grep IP4.GATEWAY
1 Like
can you tell me if i need to edit some of the info shown here with xxxxxxx
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 04:92:26:17:70:5d brd ff:ff:ff:ff:ff:ff
inet6 fe80::f1f5:4cc9:a75b:fecb/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ae:db:65:81:42:b1 brd ff:ff:ff:ff:ff:ff permaddr a0:a4:c5:c9:3d:d5
altname wlp0s20f3
4: vmnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether 00:50:56:c0:00:01 brd ff:ff:ff:ff:ff:ff
inet 172.16.82.1/24 brd 172.16.82.255 scope global vmnet1
valid_lft forever preferred_lft forever
inet6 fe80::250:56ff:fec0:1/64 scope link
valid_lft forever preferred_lft forever
5: vmnet8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether 00:50:56:c0:00:08 brd ff:ff:ff:ff:ff:ff
inet 192.168.108.1/24 brd 192.168.108.255 scope global vmnet8
valid_lft forever preferred_lft forever
inet6 fe80::250:56ff:fec0:8/64 scope link
valid_lft forever preferred_lft forever
7: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc fq_codel state UNKNOWN group default qlen 3
link/ppp
inet xx.xxx.xxx.xxx peer xxx.xxx.xx.x/xx scope global ppp0
valid_lft forever preferred_lft forever
inet6 (ipv6address)/64 scope global dynamic mngtmpaddr noprefixroute
valid_lft 172757sec preferred_lft 86357sec
inet6 (ipv6address) peer (ipv6address)/128 scope link noprefixroute
valid_lft forever preferred_lft foreveri’m using the internet right now;
nmcli device show|grep IP4.GATEWAY
IP4.GATEWAY: xxx.xxx.xx.x
IP4.GATEWAY: --
IP4.GATEWAY: --
IP4.GATEWAY: --
And if you try that one? We’re just shooting in the wind at this point.
Your gateway address is what you type into the browser to login.As I posted earlier you can use a live cd as well to login to the router .
1 Like
This page may help: http://172.16.82.4 Private Use IP WIFI
IPv4: 172.16.82.4 is Private Use IP.
172.16.82.4 is an intranet IP address, which is usually allocated to mobile phones, desktops, laptops, TVs, smart speakers and other devices. The intranet may also have another IP 172.16.82.1, which is usually used as an external gateway, this device is generally a WIFI wireless router or a switch with networking routing function. If you want to log in to its web admin interface, please click http://172.16.82.1 or http://172.16.82.4 try to enter, you also need to provide a username and password, you can also click 172.16.82.1 for more details.
172.16.82.4 is typically used for the external gateway of the internal network. Many times it is a Wifi wireless router or switch with a routing function. If you want to login to its web administration interface, please click http://172.16.82.4 to enter, if you have connection problems or if you want more technical details, please see the introduction as below.
And this should (hopefully) help you to log in to the router’s admin interface: How to log in 172.16.82.4 IP address?
1 Like
nothing.
Ok, your Gateway number dont look like 10.0.0.138.
Try the ‘xxx.xxx.xx.x’ gateway address to access your router.
1 Like
I maybe wrong but it looks like your local network enp3s0 is using ipv6.If that is your local ip range fe80::f1f5:4cc9:a75b:fecb/64 I have never used it I hope someone can help you more as all I’ve ever used is ipv4.
What @straycat said could also be the problem. And I think with the information we got from you we could not help futher.
So please check the following:
- find out to which device your cable is connected.
- if it’s ‘enp3s0’ setup a (for your network) valid ip4 adress.
As long as you mask your IPs with ‘xxx’ we can not differ it. Also there are helpful information missing. The ‘D-Link’-Router? Is it really a router with inbuild modem(cable or dsl) or just a modem. the model is interessing here.
Your network is always defined with a route - no matter the type of connection.
To get the router IP you execute below command
➜ ~ ip route
default via 172.xx.yy.1 dev eno1 proto dhcp metric 100
172.xx.yy.0/24 dev eno1 proto kernel scope link src 172.xx.yy.20 metric 100
This example show that traffic is routed to the IP 172.xx.yy.1 defined for a network with 254 hostnames or IP addresses - namely 172.xx.yy.0/24
So your router will be at the default via address which in the example is 172.xx.yy.1.