Hello guys,
For the last weeks, my touchpad stopped working while using it to browse. This DOES NOT happen when I use a mouse (Logitech MX Master 2S) and typically occurs when making gestures with more than one finger (scrolling for example). When it freezes, I simply need to close the lid of my notebook (Dell XPS 9310) and it comes back working. An important note is that my settings allow the Linux to go to sleep mode while with the lid closed.
Here some more information:
~ > inxi --admin --verbosity=7 --filter --width
System:
Kernel: 5.10.105-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=41eb5b89-c0e9-4e31-b9e8-f8b1b5d4e418 rw i915.enable_psr=0 quiet
udev.log_priority=3
Desktop: GNOME v: 41.4 tk: GTK v: 3.24.33 wm: gnome-shell dm: GDM v: 41.3
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Dell product: XPS 13 9310 v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Dell model: 022T4X v: A02 serial: <superuser required> UEFI: Dell
v: 3.3.0 date: 11/12/2021
Battery:
ID-1: BAT0 charge: 36.5 Wh (74.8%) condition: 48.8/51.0 Wh (95.8%)
volts: 8.1 min: 7.6 model: LGC-LGC6.5 DELL 2XXFW15 type: Li-poly
serial: <filter> status: discharging
Memory:
RAM: total: 15.35 GiB used: 7.02 GiB (45.7%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: 11th Gen Intel Core i7-1185G7 bits: 64 type: MT MCP
arch: Tiger Lake family: 6 model-id: 0x8C (140) stepping: 1 microcode: 0x9A
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 728 high: 921 min/max: 400/4800 scaling:
driver: intel_pstate governor: powersave cores: 1: 482 2: 652 3: 532 4: 896
5: 921 6: 890 7: 590 8: 865 bogomips: 47936
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 avx512_bitalg avx512_vbmi2
avx512_vnni avx512_vp2intersect avx512_vpopcntdq avx512bw avx512cd
avx512dq avx512f avx512ifma avx512vbmi avx512vl bmi1 bmi2 bts cat_l2
cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16
cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
flush_l1d fma fpu fsgsbase fsrm fxsr gfni ht hwp hwp_act_window hwp_epp
hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida intel_pt invpcid
invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b
movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed
rdt_a rdtscp rep_good sdbg sep sha_ni smap smep smx split_lock_detect ss
ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tme tpr_shadow tsc
tsc_adjust tsc_deadline_timer tsc_known_freq umip vaes vme vmx vnmi
vpclmulqdq vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 status: Vulnerable: eIBRS with unprivileged eBPF
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: Dell
driver: i915 v: kernel ports: active: eDP-1
empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:9a49
class-ID: 0300
Device-2: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo
bus-ID: 3-6:3 chip-ID: 0c45:672a class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.0
compositor: gnome-shell driver: gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: Sharp 0x14f9 built: 2020 res: 1920x1200 dpi: 169
gamma: 1.2 size: 288x180mm (11.34x7.09") diag: 340mm (13.4") ratio: 16:10
modes: 1920x1200
Message: Wayland GBM/EGL data currently not available.
Audio:
Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: Dell
driver: sof-audio-pci alternate: snd_hda_intel,snd_sof_pci bus-ID: 00:1f.3
chip-ID: 8086:a0c8 class-ID: 0401
Sound Server-1: ALSA v: k5.10.105-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.20 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.48 running: no
Network:
Device-1: Intel Wi-Fi 6 AX201 vendor: Rivet Networks driver: iwlwifi
v: kernel bus-ID: 00:14.3 chip-ID: 8086:a0f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 3-10:4 chip-ID: 8087:0026 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 59.63 GiB (6.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: KIOXIA
model: KXG60ZNV1T02 NVMe 1024GB size: 953.87 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 10604107 temp: 43.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 953.57 GiB size: 937.53 GiB (98.32%)
used: 59.63 GiB (6.4%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: 41eb5b89-c0e9-4e31-b9e8-f8b1b5d4e418
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: NO_LABEL uuid: 9304-5775
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-3:2 info: Shenzhen Goodix FingerPrint type: <vendor specific>
driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 27c6:533c class-ID: ff00
Device-2: 3-6:3 info: Microdia Integrated_Webcam_HD type: Video
driver: uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 0c45:672a class-ID: 0e02
Device-3: 3-10:4 info: Intel AX201 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0026
class-ID: e001
Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0 fan-2: 0
Info:
Processes: 278 Uptime: 8d 19h 43m wakeups: 11849 Init: systemd v: 250
tool: systemctl Compilers: gcc: 11.2.0 Packages: pacman: 1193 lib: 406
Shell: Zsh v: 5.8.1 running-in: gnome-terminal inxi: 3.3.14
~ > xinput -list
WARNING: running xinput against an Xwayland server. See the xinput man page for details.
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ xwayland-pointer:17 id=6 [slave pointer (2)]
⎜ ↳ xwayland-relative-pointer:17 id=7 [slave pointer (2)]
⎜ ↳ xwayland-pointer-gestures:17 id=8 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ xwayland-keyboard:17 id=9 [slave keyboard (3)]
~ > sudo dmesg | grep i2c_hid 3s
[599003.399780] i2c_hid i2c-DLL0945:00: supply vdd not found, using dummy regulator
[599003.399839] i2c_hid i2c-DLL0945:00: supply vddl not found, using dummy regulator
[694924.087318] i2c_hid i2c-DLL0945:00: supply vdd not found, using dummy regulator
[694924.087373] i2c_hid i2c-DLL0945:00: supply vddl not found, using dummy regulator
[760904.342527] i2c_hid i2c-DLL0945:00: supply vdd not found, using dummy regulator
[760904.342581] i2c_hid i2c-DLL0945:00: supply vddl not found, using dummy regulator
Any ideas? What should I do to stop this behavior?