Thunar schmiert ab beim Verbergen von unsichtbaren Dateien

Hallo zusammen,
immer, wenn ich mit Thunar verborgene Dateien anzeige und anschließend wieder verbergen möchte, schmiert Thunar ab.
Rufe ich Thunar erneut auf, sind die verborgenen Dateinen noch sichtbar. Außerdem zeigt er ein anderen Theme an, das mir nicht gefällt.
Erst nach einem Benutzerwechsel oder gar Neustart ist Thunar wieder so, wie es sein soll. Der Fehler bleibt aber nach wievor.
Vielleicht kann jemand sagen, wie ich das beheben kann?

Vielen Dank.

Hier meine Systemdaten:

System:
  Kernel: 6.12.73-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.12-x86_64
    root=UUID=92a570e2-a316-403b-bb0a-7a7b8e4655fb rw quiet splash apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: Xfce v: 4.20.1 tk: Gtk v: 3.24.51 wm: xfwm4 v: 4.20.0
    with: xfce4-panel tools: light-locker dm: LightDM v: 1.32.0 Distro: Manjaro
    base: Arch Linux
Machine:
  Type: Desktop System: LENOVO product: 90LW0023GE v: IdeaCentre T540-15ICK G
    serial: <filter> Chassis: type: 3 serial: <filter>
  Mobo: LENOVO model: 3714 v: SDK0J40700 WIN 3258149949172 serial: N/A
    part-nu: LENOVO_MT_90LW_BU_Lenovo_FM_IdeaCentre T540-15ICK G
    uuid: 208bf680-f826-11e9-a818-733469ac1f00 Firmware: UEFI vendor: LENOVO
    v: O4KKT0DA date: 08/14/2019
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.69 GiB used: 3.68 GiB (47.9%)
  Array-1: capacity: 64 GiB note: check slots: 2 modules: 2 EC: None
    max-module-size: 32 GiB note: est.
  Device-1: ChannelA-DIMM1 type: DDR4 detail: synchronous unbuffered
    (unregistered) size: 4 GiB speed: spec: 2667 MT/s actual: 2666 MT/s volts:
    curr: 1.2 min: 1.2 max: 1.2 width (bits): data: 64 total: 64
    manufacturer: Samsung part-no: M378A5244CB0-CTD serial: <filter>
  Device-2: ChannelB-DIMM1 type: DDR4 detail: synchronous unbuffered
    (unregistered) size: 4 GiB speed: spec: 2667 MT/s actual: 2666 MT/s volts:
    curr: 1.2 min: 1.2 max: 1.2 width (bits): data: 64 total: 64
    manufacturer: Samsung part-no: M378A5244CB0-CTD serial: <filter>
CPU:
  Info: model: Intel Core i5-9400F socket: LGA1151 (U3E1) note: check bits: 64
    type: MCP arch: Coffee Lake gen: core 9 level: v3 note: check built: 2018
    process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 0xA (10)
    microcode: 0xFA
  Topology: cpus: 1x dies: 1 clusters: 6 cores: 6 smt: <unsupported> cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
    L3: 9 MiB desc: 1x9 MiB
  Speed (MHz): avg: 820 min/max: 800/4100 base/boost: 2900/4100 scaling:
    driver: intel_pstate governor: powersave volts: 0.9 V ext-clock: 100 MHz
    cores: 1: 820 2: 820 3: 820 4: 820 5: 820 6: 820 bogomips: 34814
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
    clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
    dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
    fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida
    intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr
    mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
    pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep
    smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
    tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic
    xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: KVM: Split huge pages
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
    disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: disabled; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
  Device-1: NVIDIA TU117 [GeForce GTX 1650] vendor: ZOTAC driver: nvidia
    v: 575.64.05 alternate: nouveau,nvidia_drm non-free: 550-580.xx+
    status: current (as of 2025-11; EOL~2026-12-xx) arch: Turing code: TUxxx
    process: TSMC 12nm FF built: 2018-2022 pcie: gen: 1 speed: 2.5 GT/s
    lanes: 16 link-max: gen: 3 speed: 8 GT/s ports: active: none off: HDMI-A-1
    empty: DP-1,DP-2 bus-ID: 01:00.0 chip-ID: 10de:1f82 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.21 compositor: xfwm4 v: 4.20.0 driver:
    X: loaded: nvidia gpu: nvidia,nvidia-nvswitch display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2259x1271 s-dpi: 96 s-size: 598x337mm (23.54x13.27")
    s-diag: 686mm (27.02")
  Monitor-1: HDMI-A-1 mapped: HDMI-0 note: disabled model: Acer XB271HU A
    serial: <filter> built: 2020 res: mode: 1920x1080 hz: 60
    scale: 84% (1.1765625) to: 2259x1271 dpi: 81 gamma: 1.2
    size: 600x340mm (23.62x13.39") diag: 685mm (27") ratio: 16:9 modes:
    max: 2560x1440 min: 640x480
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
  Info: Tools: de: xfce4-display-settings gpu: nvidia-settings,nvidia-smi
    x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3 chip-ID: 8086:a2f0
    class-ID: 0403
  Device-2: NVIDIA vendor: ZOTAC driver: snd_hda_intel v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1
    chip-ID: 10de:10fa class-ID: 0403
  API: ALSA v: k6.12.73-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: JACK v: 1.9.22 status: off tools: N/A
  Server-3: PipeWire v: 1.4.10 status: n/a (root, process) tools: pw-cli
  Server-4: PulseAudio v: 17.0-98-gb096 status: active (root, process)
    with: pulseaudio-alsa type: plugin tools: pacat,pactl,pavucontrol
Network:
  Device-1: Intel Ethernet I219-V vendor: Lenovo driver: e1000e v: kernel
    port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
  IF: eno1 state: down mac: <filter>
  Device-2: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0
    chip-ID: 8086:3166 class-ID: 0280
  IF: wlp3s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Info: services: NetworkManager,wpa_supplicant
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:5 chip-ID: 8087:0a2a
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.14 TiB used: 633.79 GiB (54.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba model: N/A
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 5108AGLA temp: 29.9 C
    scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM003-1SB102
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 7200 serial: <filter> fw-rev: CC63 scheme: MBR
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 238.17 GiB size: 233.38 GiB (97.99%)
    used: 136.91 GiB (58.7%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: N/A uuid: 92a570e2-a316-403b-bb0a-7a7b8e4655fb
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 292 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: N/A uuid: BFE1-714D
  ID-3: /mnt/606ab359-6df6-4cf0-a884-87fa20e10e30 raw-size: 931.51 GiB
    size: 915.82 GiB (98.32%) used: 496.88 GiB (54.3%) fs: ext4
    block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: Data
    uuid: 606ab359-6df6-4cf0-a884-87fa20e10e30
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 10 GiB used: 0 KiB (0.0%) priority: -2
    file: /swapfile
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-6:2 info: Lenovo Calliope USB Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s)
    lanes: 1 mode: 1.0 power: 100mA chip-ID: 17ef:608c class-ID: 0300
  Device-2: 1-7:3 info: Logitech Logi Bolt Receiver type: keyboard,mouse,HID
    driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 98mA chip-ID: 046d:c548 class-ID: 0300
  Device-3: 1-12:4 info: Realtek RTS5129 Card Reader Controller
    type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
    interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 500mA chip-ID: 0bda:0129 class-ID: ff00 serial: <filter>
  Device-4: 1-14:5 info: Intel Bluetooth wireless interface type: bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 100mA chip-ID: 8087:0a2a class-ID: e001
  Hub-2: 2-0:1 info: super-speed hub ports: 8 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 34.0 C mobo: N/A gpu: nvidia temp: 37 C
  Fan Speeds (rpm): N/A gpu: nvidia fan: 21%
Info:
  Processes: 246 Power: uptime: 1h 3m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 3.05 GiB services: upowerd,xfce4-power-manager
    Init: systemd v: 259 default: graphical tool: systemctl
  Packages: 2204 pm: dpkg pkgs: 0 pm: pacman pkgs: 2150 libs: 470
    tools: pamac pm: flatpak pkgs: 45 pm: snap pkgs: 9 Compilers: clang: 21.1.8
    gcc: 15.2.1 Shell: Sudo (sudo) v: 1.9.17p2 default: Bash v: 5.3.9
    running-in: xfce4-terminal inxi: 3.3.40


Ctrl+H not working?

1 Like

…und vielleicht hast du irgendwelche Plugins extra installiert, oder aus aur? Bei mir ist so und funktioniert alles

[teo@teo-lenovo-v15 ~]$ pacman -Qs thunar
local/thunar 4.20.7-1 (xfce4)
    Modern, fast and easy-to-use file manager for Xfce
local/thunar-archive-plugin 0.6.0-1 (xfce4-goodies)
    Adds archive operations to the Thunar file context menus
local/thunar-media-tags-plugin 0.6.0-1 (xfce4-goodies)
    Adds special features for media files to the Thunar File Manager
local/thunar-volman 4.20.0-2 (xfce4)
    Automatic management of removable drives and media for Thunar

1 Like

Hi Teo,
danke für die Tipps. Ich habe keine Ahnung, ob das eventuell an einem Plugin liegt.
Der Fehler trat nach einem der letzten Updates auf. Kann Zufall sein, kein Plan.
Ich habe Thunar sogar neu installiert, da funktionierte wieder alles. Dann plötzlich kam der Fehler wieder.

Trotzdem Danke!

Hi Leute,
ich habe die Lösung gerade selbst zufällig gefunden!
Man geht in die Systemsteuerung und setzt die Short-Keys auf Standardwerte zurück. Es funktioniert wieder. Wahrscheinlich habe ich einen Short-Key gesetzt, der in Konflikt mit STRG-H gekommen ist.

Vielen Dank an alle, die sich vielleicht den Kopf zerbrochen haben.

Gruß

1 Like

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.