Hallo Miteinander,
Jetzt hänge ich an den letzten Metern beim Einstellen doch noch.
Habe mein Arbeits- und Schulgerät heute (zur Ausnahme mal Zeit) von X11 auf Wayland umgestellt (keine große Kunst ich weiß) und hatte die Hoffnung dass mein Problem sich erledigt. War nicht so.
Ich kann über Menü oder Hotkeys die Helligkeit “verändern”, am Bildschirm kommt die Scala wo ich zwischen 100% und 0% bin; das Problem: Mein Bildschirm bleibt aus Solarium Niveau (also sehr Hell).
Ich vermute Treiber oder Firmware… weiß es aber nicht.
Habe schon über xrandr und xbacklight gelesen.
Bringt mir aber nicht viel, hab scheinbar die Porgramme nicht drauf, wenn ich es in der Konsole eingebe kommt no matches found (Nach dem vorgeschlagen wurde ob ich _xrandr nehmen wollte; und beim anderen command not found
Ich habe das Gefühl mir fehlt da was.
System:
Kernel: 6.12.12-2-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.12-x86_64
root=UUID=eeeb4007-a3b9-4f87-8064-b7031bfca84f rw quiet splash
resume=UUID=b33d0385-0382-4ffa-b626-d1bc40b3921a udev.log_priority=3
Desktop: KDE Plasma v: 6.2.5 tk: Qt v: N/A info: frameworks v: 6.10.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Manjaro base: Arch Linux
Machine:
Type: Convertible System: LENOVO product: 20FQ005UIX v: ThinkPad X1 Yoga
serial: <superuser required> Chassis: type: 31 serial: <superuser required>
Mobo: LENOVO model: 20FQ005UIX v: SDK0K17763 WIN
serial: <superuser required> part-nu: LENOVO_MT_20FQ_BU_Think_FM_ThinkPad
X1 Yoga 1st uuid: <superuser required> UEFI-[Legacy]: LENOVO
v: N1FET78W (1.52 ) date: 12/27/2021
Battery:
ID-1: BAT0 charge: 39.8 Wh (88.8%) condition: 44.8/56.0 Wh (80.0%)
volts: 16.1 min: 15.3 model: SMP 01AV441 type: Li-poly serial: <filter>
status: not charging
Memory:
System RAM: total: 16 GiB available: 15.04 GiB used: 3.01 GiB (20.0%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 24 GiB slots: 2 modules: 2 EC: None
max-module-size: 12 GiB note: est.
Device-1: ChannelA type: LPDDR3 detail: synchronous size: 8 GiB
speed: 1867 MT/s volts: curr: 1 width (bits): data: 64 total: 64
manufacturer: SK Hynix part-no: H9CCNNNCLTMLAR serial: N/A
Device-2: ChannelB type: LPDDR3 detail: synchronous size: 8 GiB
speed: 1867 MT/s volts: curr: 1 width (bits): data: 64 total: 64
manufacturer: SK Hynix part-no: H9CCNNNCLTMLAR serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i7-6600U bits: 64 type: MT MCP arch: Skylake
gen: core 6 level: v3 note: check built: 2015 process: Intel 14nm family: 6
model-id: 0x4E (78) stepping: 3 microcode: 0xF0
Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 threads: 4 tpc: 2
smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB
desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 400 min/max: 400/3400 scaling: driver: intel_pstate
governor: powersave cores: 1: 400 2: 400 3: 400 4: 400 bogomips: 22408
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida
intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr
mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep
smap smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic
xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Vulnerable: No microcode
Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional;
RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Lenovo driver: i915
v: kernel arch: Gen-9 process: Intel 14n built: 2015-16 ports: active: eDP-1
empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:1916
class-ID: 0300
Device-2: Chicony Integrated Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:4 chip-ID: 04f2:b5c1
class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.5
compositor: kwin_wayland driver: X: loaded: modesetting
alternate: fbdev,vesa dri: iris gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: Lenovo 0x4140 built: 2015 res: mode: 2560x1440
hz: 60 scale: 150% (1.5) to: 1707x960 dpi: 210 gamma: 1.2 chroma: red:
x: 0.686 y: 0.314 green: x: 0.243 y: 0.710 blue: x: 0.137 y: 0.055 white:
x: 0.314 y: 0.329 size: 310x175mm (12.2x6.89") diag: 356mm (14")
ratio: 16:9 modes: 2560x1440
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris wayland:
drv: iris x11: drv: iris
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.3.4-arch1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 520 (SKL GT2)
device-ID: 8086:1916 memory: 7.34 GiB unified: yes display-ID: :1.0
API: Vulkan v: 1.4.303 layers: N/A device: 0 type: integrated-gpu
name: Intel HD Graphics 520 (SKL GT2) driver: N/A device-ID: 8086:1916
surfaces: xcb,xlib,wayland
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor wl: wayland-info x11: xdpyinfo,xprop
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3
chip-ID: 8086:9d70 class-ID: 0403
API: ALSA v: k6.12.12-2-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Lenovo driver: e1000e v: kernel
port: N/A bus-ID: 00:1f.6 chip-ID: 8086:156f class-ID: 0200
IF: enp0s31f6 state: down mac: <filter>
Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 04:00.0 chip-ID: 8086:24f3 class-ID: 0280
IF: wlp4s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: deprecated dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: wwp0s20f0u2i12 state: down mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:7 chip-ID: 8087:0a2b
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 4 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 238.47 GiB used: 30.96 GiB (13.0%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix
model: BC501 HFM256GDJTNG-8310A size: 238.47 GiB block-size: physical: 512 B
logical: 512 B speed: 15.8 Gb/s lanes: 2 tech: SSD serial: <filter>
fw-rev: 80002C00 temp: 33.9 C scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 221.93 GiB size: 217.39 GiB (97.95%)
used: 30.96 GiB (14.2%) fs: ext4 dev: /dev/nvme0n1p1 maj-min: 259:1
label: N/A uuid: eeeb4007-a3b9-4f87-8064-b7031bfca84f
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 16.54 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p2 maj-min: 259:2 label: swap
uuid: b33d0385-0382-4ffa-b626-d1bc40b3921a
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-2:2 info: Sierra Wireless EM7455 type: communication,CDC-data
driver: cdc_mbim interfaces: 2 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 500mA chip-ID: 1199:9079 class-ID: 0a00
serial: <filter>
Device-2: 1-7:7 info: Intel Bluetooth wireless interface type: bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 100mA chip-ID: 8087:0a2b class-ID: e001
Device-3: 1-8:4 info: Chicony Integrated Camera type: video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b5c1 class-ID: 0e02
Device-4: 1-9:5 info: Validity Sensors VFS7500 Touch Fingerprint Sensor
type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 138a:0090 class-ID: ff00 serial: <filter>
Device-5: 1-10:6 info: Wacom Pen and multitouch sensor type: HID
driver: usbhid,wacom interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 400mA chip-ID: 056a:5087 class-ID: 0300
Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 42.0 C pch: 40.5 C mobo: N/A
Fan Speeds (rpm): fan-1: 0
Repos:
Packages: 1341 pm: pacman pkgs: 1329 libs: 375 tools: pamac pm: flatpak
pkgs: 12
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.hostiko.network/manjaro/stable/$repo/$arch
2: https://forksystems.mm.fcix.net/manjaro/stable/$repo/$arch
3: https://volico.mm.fcix.net/manjaro/stable/$repo/$arch
4: https://codingflyboy.mm.fcix.net/manjaro/stable/$repo/$arch
5: https://mirror.kamtv.ru/manjaro/stable/$repo/$arch
6: https://southfront.mm.fcix.net/manjaro/stable/$repo/$arch
7: https://bd.mirror.vanehost.com/Manjaro/stable/$repo/$arch
8: https://mirror.2degrees.nz/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 194
1: cpu: 100% command: ps pid: 2933 mem: 4.04 MiB (0.0%)
2: cpu: 6.1% command: vivaldi-bin pid: 2703 mem: 272.8 MiB (1.7%)
3: cpu: 3.0% command: vivaldi-bin pid: 1560 mem: 275.3 MiB (1.7%)
4: cpu: 1.9% command: kwin_wayland pid: 705 mem: 194.0 MiB (1.2%)
5: cpu: 1.7% command: vivaldi-bin pid: 1618 mem: 228.4 MiB (1.4%)
Memory top: 5 of 194
1: mem: 443.0 MiB (2.8%) command: vivaldi-bin pid: 1513 cpu: 1.5%
2: mem: 402.7 MiB (2.6%) command: plasmashell pid: 904 cpu: 1.0%
3: mem: 275.3 MiB (1.7%) command: vivaldi-bin pid: 1560 cpu: 3.0%
4: mem: 272.8 MiB (1.7%) command: vivaldi-bin pid: 2703 cpu: 6.1%
5: mem: 241.1 MiB (1.5%) command: konsole pid: 1920 cpu: 0.1%
Info:
Processes: 194 Power: uptime: 40m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Compilers: clang: 19.1.7 gcc: 14.2.1 Shell: Zsh v: 5.9 default: Bash
v: 5.2.37 running-in: konsole inxi: 3.3.37
Wie kann ich die Treiber prüfen bzw. neu Installieren (lassen)?
Oder fehlt es woanders?
Grüße