System:
Kernel: 5.15.185-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=7e180712-d0ad-439a-a53d-bcd4c3298aab rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 48.2 tk: GTK v: 3.24.49 wm: gnome-shell
tools: gsd-screensaver-proxy dm: GDM v: 48.0 Distro: Manjaro
base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X515DA_M515DA
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: X515DA v: 1.0 serial: <superuser required>
uuid: <superuser required> UEFI: American Megatrends v: X515DA.308
date: 08/05/2022
Battery:
ID-1: BAT0 charge: 29.5 Wh (100.0%) condition: 29.5/37.1 Wh (79.3%)
volts: 7.8 min: 7.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
status: not charging cycles: 138
Memory:
System RAM: total: 24 GiB available: 21.45 GiB used: 2.91 GiB (13.6%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 32 GiB slots: 2 modules: 2 EC: None
max-module-size: 16 GiB note: est.
Device-1: Channel-A DIMM 0 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: spec: 3200 MT/s actual: 2400 MT/s volts:
note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
manufacturer: N/A part-no: N/A serial: N/A
Device-2: Channel-B DIMM 0 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 16 GiB speed: spec: 3200 MT/s actual: 2400 MT/s
volts: note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
manufacturer: Samsung part-no: M471A2K43DB1-CWE serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx bits: 64
type: MT MCP arch: Zen/Zen+ note: check gen: 1 level: v3 note: check
built: 2019 process: GF 12nm family: 0x17 (23) model-id: 0x18 (24)
stepping: 1 microcode: 0x8108109
Topology: cpus: 1x dies: 1 cores: 4 threads: 8 tpc: 2 smt: enabled cache:
L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
desc: 1x4 MiB
Speed (MHz): avg: 2954 min/max: 1400/2100 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 2954 2: 2954 3: 2954
4: 2954 5: 2954 6: 2954 7: 2954 8: 2954 bogomips: 33548
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb
cpuid cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c
flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf
lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor movbe msr mtrr
mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat
pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdrand rdseed rdtscp rep_good
sep sev sev_es sha_ni skinit smap smca sme smep ssbd sse sse2 sse4_1
sse4_2 sse4a ssse3 succor svm svm_lock syscall tce topoext tsc tsc_scale
v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt xgetbv1 xsave xsavec
xsaveerptr xsaveopt
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_rstack_overflow mitigation: safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: disabled; STIBP: disabled;
RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Picasso/Raven 2 [Radeon Vega
Series / Radeon Mobile Series] vendor: ASUSTeK driver: amdgpu v: kernel
arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: HDMI-A-1
bus-ID: 03:00.0 chip-ID: 1002:15d8 class-ID: 0300 temp: 62.0 C
Device-2: Sonix USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2.2:4 chip-ID: 322e:2103
class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.18 with: Xwayland v: 24.1.8
compositor: gnome-shell driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: eDP-1 model: BOE Display 0x0903 built: 2019 res: 1920x1080
dpi: 142 gamma: 1.2 chroma: red: x: 0.573 y: 0.357 green: x: 0.349 y: 0.580
blue: x: 0.165 y: 0.125 white: x: 0.314 y: 0.329
size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9
modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720,
1024x768, 800x600, 640x480
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.4-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Vega 8 Graphics
(radeonsi raven ACO DRM 3.42 5.15.185-1-MANJARO) device-ID: 1002:15d8
memory: 1.95 GiB unified: no display-ID: :0.0
Info: Tools: api: eglinfo,glxinfo x11: xprop,xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP
Audio driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 03:00.1 chip-ID: 1002:15de class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Audio Coprocessor
driver: snd_pci_acp3x v: kernel alternate: snd_rn_pci_acp3x,snd_pci_acp5x
pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2
class-ID: 0480
Device-3: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k5.15.185-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: qjackctl
Server-2: PipeWire v: 1.4.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Lite-On driver: rtw_8822ce v: N/A modules: rtw88_8822ce pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:c822
class-ID: 0280
IF: wlp1s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: docker0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
Info: services: mld, NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Lite-On Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-2.1:3 chip-ID: 04ca:4005
class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 5 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 476.94 GiB used: 131.09 GiB (27.5%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Micron model: 2400 MTFDKBA512QFM
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: V3MA003 temp: 32.9 C
scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
used: 131.09 GiB (27.5%) fs: f2fs dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: 7e180712-d0ad-439a-a53d-bcd4c3298aab
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 320 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
uuid: 0222-421A
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-2:3 info: TP-Link TL-WN722N v2/v3 [Realtek RTL8188EUS]
type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 2357:010c class-ID: 0000 serial: <filter>
Device-2: 1-4:2 info: Logitech RX1000 Laser Mouse type: mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 98mA
chip-ID: 046d:c046 class-ID: 0301
Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 3-2.1:3 info: Lite-On Bluetooth Radio type: bluetooth
driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 500mA chip-ID: 04ca:4005 class-ID: e001 serial: <filter>
Device-2: 3-2.2:4 info: Sonix USB2.0 HD UVC WebCam type: video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 500mA chip-ID: 322e:2103 class-ID: 0e02
Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 52.4 C mobo: N/A gpu: amdgpu temp: 52.0 C
Fan Speeds (rpm): cpu: 3400
Repos:
Packages: 1536 pm: dpkg pkgs: 0 pm: pacman pkgs: 1521 libs: 492
tools: gnome-software,pamac,yay pm: flatpak pkgs: 0 pm: snap pkgs: 15
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.ibakerserver.pt/manjaro/stable/$repo/$arch
2: https://mirrors.up.pt/pub/manjaro/stable/$repo/$arch
3: https://forksystems.mm.fcix.net/manjaro/stable/$repo/$arch
4: https://cofractal-ewr.mm.fcix.net/manjaro/stable/$repo/$arch
5: https://mirror.futureweb.be/manjaro/stable/$repo/$arch
6: https://opencolo.mm.fcix.net/manjaro/stable/$repo/$arch
7: https://mirrors.gigenet.com/manjaro/stable/$repo/$arch
8: https://mirror.ufro.cl/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 304
1: cpu: 50.0% command: ps pid: 16671 mem: 4.04 MiB (0.0%)
2: cpu: 6.0% command: firefox pid: 11578 mem: 481.8 MiB (2.1%)
3: cpu: 2.3% command: firefox pid: 11956 mem: 280.8 MiB (1.2%)
4: cpu: 1.2% command: firefox pid: 11774 mem: 469.7 MiB (2.1%)
5: cpu: 0.7% command: [irq/68-ELAN1200] pid: 705 mem: 0.00 MiB (0.0%)
Memory top: 5 of 304
1: mem: 481.8 MiB (2.1%) command: firefox pid: 11578 cpu: 6.0%
2: mem: 469.7 MiB (2.1%) command: firefox pid: 11774 cpu: 1.2%
3: mem: 316.5 MiB (1.4%) command: gnome-shell pid: 2249 cpu: 0.4%
4: mem: 280.8 MiB (1.2%) command: firefox pid: 11956 cpu: 2.3%
5: mem: 234.0 MiB (1.0%) command: firefox pid: 11957 cpu: 0.4%
Info:
Processes: 304 Power: uptime: 10h 13m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 2 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 8.56 GiB services: gsd-power,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Compilers: clang: 20.1.6 gcc: 15.1.1 Shell: Zsh v: 5.9
running-in: gnome-terminal inxi: 3.3.38
The touchpad doesn’t work. I reinstalled the linux510 linux510-headers kernel to 612 and apparently after that the touchpad stopped working. I tried to figure it out myself and found some
BG405
28 June 2025 19:32
2
Hi, could you post your current system info please?
inxi -zv8
… like you did in your previous topic; we can’t go on that one because things have changed.
In the meantime, have you tried other kernels e.g. linux66 (LTS)?
System:
Kernel: 5.15.185-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=7e180712-d0ad-439a-a53d-bcd4c3298aab rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 48.2 tk: GTK v: 3.24.49 wm: gnome-shell
tools: gsd-screensaver-proxy dm: GDM v: 48.0 Distro: Manjaro
base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X515DA_M515DA
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: X515DA v: 1.0 serial: <superuser required>
uuid: <superuser required> UEFI: American Megatrends v: X515DA.308
date: 08/05/2022
Battery:
ID-1: BAT0 charge: 29.5 Wh (100.0%) condition: 29.5/37.1 Wh (79.3%)
volts: 7.8 min: 7.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
status: not charging cycles: 138
Memory:
System RAM: total: 24 GiB available: 21.45 GiB used: 2.91 GiB (13.6%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 32 GiB slots: 2 modules: 2 EC: None
max-module-size: 16 GiB note: est.
Device-1: Channel-A DIMM 0 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: spec: 3200 MT/s actual: 2400 MT/s volts:
note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
manufacturer: N/A part-no: N/A serial: N/A
Device-2: Channel-B DIMM 0 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 16 GiB speed: spec: 3200 MT/s actual: 2400 MT/s
volts: note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
manufacturer: Samsung part-no: M471A2K43DB1-CWE serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx bits: 64
type: MT MCP arch: Zen/Zen+ note: check gen: 1 level: v3 note: check
built: 2019 process: GF 12nm family: 0x17 (23) model-id: 0x18 (24)
stepping: 1 microcode: 0x8108109
Topology: cpus: 1x dies: 1 cores: 4 threads: 8 tpc: 2 smt: enabled cache:
L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
desc: 1x4 MiB
Speed (MHz): avg: 2954 min/max: 1400/2100 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 2954 2: 2954 3: 2954
4: 2954 5: 2954 6: 2954 7: 2954 8: 2954 bogomips: 33548
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb
cpuid cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c
flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf
lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor movbe msr mtrr
mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat
pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdrand rdseed rdtscp rep_good
sep sev sev_es sha_ni skinit smap smca sme smep ssbd sse sse2 sse4_1
sse4_2 sse4a ssse3 succor svm svm_lock syscall tce topoext tsc tsc_scale
v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt xgetbv1 xsave xsavec
xsaveerptr xsaveopt
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_rstack_overflow mitigation: safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: disabled; STIBP: disabled;
RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Picasso/Raven 2 [Radeon Vega
Series / Radeon Mobile Series] vendor: ASUSTeK driver: amdgpu v: kernel
arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: HDMI-A-1
bus-ID: 03:00.0 chip-ID: 1002:15d8 class-ID: 0300 temp: 62.0 C
Device-2: Sonix USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2.2:4 chip-ID: 322e:2103
class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.18 with: Xwayland v: 24.1.8
compositor: gnome-shell driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: eDP-1 model: BOE Display 0x0903 built: 2019 res: 1920x1080
dpi: 142 gamma: 1.2 chroma: red: x: 0.573 y: 0.357 green: x: 0.349 y: 0.580
blue: x: 0.165 y: 0.125 white: x: 0.314 y: 0.329
size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9
modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720,
1024x768, 800x600, 640x480
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.4-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Vega 8 Graphics
(radeonsi raven ACO DRM 3.42 5.15.185-1-MANJARO) device-ID: 1002:15d8
memory: 1.95 GiB unified: no display-ID: :0.0
Info: Tools: api: eglinfo,glxinfo x11: xprop,xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP
Audio driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 03:00.1 chip-ID: 1002:15de class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Audio Coprocessor
driver: snd_pci_acp3x v: kernel alternate: snd_rn_pci_acp3x,snd_pci_acp5x
pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2
class-ID: 0480
Device-3: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k5.15.185-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: qjackctl
Server-2: PipeWire v: 1.4.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Lite-On driver: rtw_8822ce v: N/A modules: rtw88_8822ce pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 01:00.0 chip-ID: 10ec:c822
class-ID: 0280
IF: wlp1s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: docker0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
Info: services: mld, NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Lite-On Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-2.1:3 chip-ID: 04ca:4005
class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 5 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 476.94 GiB used: 131.09 GiB (27.5%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Micron model: 2400 MTFDKBA512QFM
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: V3MA003 temp: 32.9 C
scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
used: 131.09 GiB (27.5%) fs: f2fs dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: 7e180712-d0ad-439a-a53d-bcd4c3298aab
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 320 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
uuid: 0222-421A
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-2:3 info: TP-Link TL-WN722N v2/v3 [Realtek RTL8188EUS]
type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 2357:010c class-ID: 0000 serial: <filter>
Device-2: 1-4:2 info: Logitech RX1000 Laser Mouse type: mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 98mA
chip-ID: 046d:c046 class-ID: 0301
Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 3-2.1:3 info: Lite-On Bluetooth Radio type: bluetooth
driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 500mA chip-ID: 04ca:4005 class-ID: e001 serial: <filter>
Device-2: 3-2.2:4 info: Sonix USB2.0 HD UVC WebCam type: video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 500mA chip-ID: 322e:2103 class-ID: 0e02
Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 52.4 C mobo: N/A gpu: amdgpu temp: 52.0 C
Fan Speeds (rpm): cpu: 3400
Repos:
Packages: 1536 pm: dpkg pkgs: 0 pm: pacman pkgs: 1521 libs: 492
tools: gnome-software,pamac,yay pm: flatpak pkgs: 0 pm: snap pkgs: 15
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.ibakerserver.pt/manjaro/stable/$repo/$arch
2: https://mirrors.up.pt/pub/manjaro/stable/$repo/$arch
3: https://forksystems.mm.fcix.net/manjaro/stable/$repo/$arch
4: https://cofractal-ewr.mm.fcix.net/manjaro/stable/$repo/$arch
5: https://mirror.futureweb.be/manjaro/stable/$repo/$arch
6: https://opencolo.mm.fcix.net/manjaro/stable/$repo/$arch
7: https://mirrors.gigenet.com/manjaro/stable/$repo/$arch
8: https://mirror.ufro.cl/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 304
1: cpu: 50.0% command: ps pid: 16671 mem: 4.04 MiB (0.0%)
2: cpu: 6.0% command: firefox pid: 11578 mem: 481.8 MiB (2.1%)
3: cpu: 2.3% command: firefox pid: 11956 mem: 280.8 MiB (1.2%)
4: cpu: 1.2% command: firefox pid: 11774 mem: 469.7 MiB (2.1%)
5: cpu: 0.7% command: [irq/68-ELAN1200] pid: 705 mem: 0.00 MiB (0.0%)
Memory top: 5 of 304
1: mem: 481.8 MiB (2.1%) command: firefox pid: 11578 cpu: 6.0%
2: mem: 469.7 MiB (2.1%) command: firefox pid: 11774 cpu: 1.2%
3: mem: 316.5 MiB (1.4%) command: gnome-shell pid: 2249 cpu: 0.4%
4: mem: 280.8 MiB (1.2%) command: firefox pid: 11956 cpu: 2.3%
5: mem: 234.0 MiB (1.0%) command: firefox pid: 11957 cpu: 0.4%
Info:
Processes: 304 Power: uptime: 10h 13m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 2 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 8.56 GiB services: gsd-power,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Compilers: clang: 20.1.6 gcc: 15.1.1 Shell: Zsh v: 5.9
running-in: gnome-terminal inxi: 3.3.38
(I tried to revert it back but nothing changed)
Also, I did not try to use other kernels, taking into account that initially everything worked
Mod edit:- Your inxi out put has been moved to this post, where the incomplete attempt was originally. No charge.
Please post your full inxi output as previously requested.
Also, follow the link (below) to learn how to post command output.
Regards.
Welcome to the Manjaro community
As a new or infrequent forum user, please take some time to familiarise yourself with Forum requirements, and the many ways to use the forum to your benefit:
Update Announcements
The Update Announcements contain important information and a Known Issues and Solutions section that should generally be checked before posting a request for support.
System Information
While information from *-fetch type apps might be fine for someone wishing to buy your computer, for Support purposes it’s better to ask your system directly;
Output of the inxi command with appropriate parameters will achieve this (naturally, formatted according to forum guidelines) and will generally be more useful for those wishing to help:
inxi --filter --verbosity=8
or the short form:
inxi -zv8
Be prepared to provide output from other commands whenever asked. It’s equally important to provide as much actionable information as possible in your first post, rather than simply indicating there is a problem.
Highly Recommended
Required Reading
Technical Resources
Possibly this problem? https://wiki.archlinux.org/title/Touchpad_Synaptics#Cursor_jump
Maybe add this to the kernel parameter:
i8042.nomux=1 i8042.reset
More info: modinfo i8042
@tor
There is no need to keep re-posting your inxi output – it has already been moved to post #3 where it was originally.
Regards.
I have reduced the porameters
sudo nano /etc/default/grub
and
GRUB_CMDLINE_LINUX_DEFAULT='quiet splash apparmor=1 security=apparmor udev.log_priority=3 i8042.nomux=1 i8042.reset'
now pochimuto before entering the user works if I use 2 fingers but after entering it stops
ok you mean parameters… What did the parameters look like before?
Sorry, the sentence does not make sense. What is “pochimuto”?
tor
29 June 2025 10:15
11
Sorry I’m using a translator. For some reason
It looked like
quiet splash apparmor=1 security=apparmor udev.log_priority=3
Ok it is same as from your inxi:
So you did not reduce it, but expand it. How can a translator get it so wrong?
Use https://www.deepl.com/ which is much better.
