The notebook turns on and off with the lid closed

[9acca9]

I realize this is happening because I hear the cooler turning on and off, as if it never hibernated (or suspended).

System:
  Kernel: 6.2.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=a3aaae26-ab38-4149-85a1-09c9afda9c1e rw rootflags=subvol=@ quiet
    quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
  Desktop: GNOME v: 43.4 tk: GTK v: 3.24.37 wm: gnome-shell dm: GDM v: 43.0
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: EXO S.A. product: EXO Smart XQ3h v: N/A serial: N/A
  Mobo: EXO S.A. model: CT15Q5-S serial: N/A UEFI: WEIBU
    v: YHSM-BI-15.6-XU133TR120-TA60B-328-C date: 11/23/2021
Battery:
  ID-1: BAT0 charge: 45.6 Wh (100.0%) condition: 45.6/45.6 Wh (100.0%)
    volts: 8.5 min: N/A model: WB SR 1 WB Lion Battery type: Li-ion
    serial: <filter> status: discharging
Memory:
  RAM: total: 7.5 GiB used: 3.29 GiB (43.8%)
  Array-1: capacity: 40 GiB slots: 8 EC: None max-module-size: 5 GiB
    note: est.
  Device-1: Controller1-ChannelA-DIMM0 type: no module installed
  Device-2: Controller1-ChannelB-DIMM0 type: no module installed
  Device-3: Controller1-ChannelC-DIMM0 type: no module installed
  Device-4: Controller1-ChannelD-DIMM0 type: no module installed
  Device-5: Controller0-ChannelA type: LPDDR4 detail: synchronous size: 2 GiB
    speed: 3200 MT/s volts: curr: 0.6 min: 0.6 max: 0.6 width (bits): data: 16
    total: 16 manufacturer: N/A part-no: N/A serial: <filter>
  Device-6: Controller0-ChannelB type: LPDDR4 detail: synchronous size: 2 GiB
    speed: 3200 MT/s volts: curr: 0.6 min: 0.6 max: 0.6 width (bits): data: 16
    total: 16 manufacturer: N/A part-no: N/A serial: <filter>
  Device-7: Controller0-ChannelC type: LPDDR4 detail: synchronous size: 2 GiB
    speed: 3200 MT/s volts: curr: 0.6 min: 0.6 max: 0.6 width (bits): data: 16
    total: 16 manufacturer: N/A part-no: N/A serial: <filter>
  Device-8: Controller0-ChannelD type: LPDDR4 detail: synchronous size: 2 GiB
    speed: 3200 MT/s volts: curr: 0.6 min: 0.6 max: 0.6 width (bits): data: 16
    total: 16 manufacturer: N/A part-no: N/A serial: <filter>
CPU:
  Info: model: 11th Gen Intel Core i3-1115G4 socket: U3E1 bits: 64 type: MT MCP
    arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
    process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xA6
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
    L1: 160 KiB desc: d-2x48 KiB; i-2x32 KiB L2: 2.5 MiB desc: 2x1.2 MiB
    L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 3000 min/max: 400/4100 base/boost: 3000/4100 scaling:
    driver: intel_pstate governor: powersave volts: 0.8 V ext-clock: 100 MHz
    cores: 1: 3000 2: 3000 3: 3000 4: 3000 bogomips: 23961
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 avx512_bitalg avx512_vbmi2
    avx512_vnni avx512_vp2intersect avx512_vpopcntdq avx512bw avx512cd
    avx512dq avx512f avx512ifma avx512vbmi avx512vl bmi1 bmi2 bts cat_l2
    cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16
    cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
    flush_l1d fma fpu fsgsbase fsrm fxsr gfni ht hwp hwp_act_window hwp_epp
    hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt ida intel_pt invpcid
    invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b
    movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm
    pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed
    rdt_a rdtscp rep_good sdbg sep sha_ni smap smep split_lock_detect ss ssbd
    sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
    tsc_adjust tsc_deadline_timer tsc_known_freq umip vaes vme vmx vnmi
    vpclmulqdq vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Tiger Lake-LP GT2 [UHD Graphics G4] driver: i915 v: kernel
    arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports: active: eDP-1
    empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:9a78 class-ID: 0300
  Device-2: Sunplus Innovation Hy-UXGA-Camera type: USB driver: uvcvideo
    bus-ID: 2-7:4 chip-ID: 1bcf:2ced class-ID: 0e02
  Display: server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
    compositor: gnome-shell driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1368x768 s-dpi: 96 s-size: 362x203mm (14.25x7.99")
    s-diag: 415mm (16.34")
  Monitor-1: eDP-1 model-id: STA 0xafc9 built: 2020 res: 1368x768 hz: 60
    dpi: 101 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5")
    ratio: 16:9 modes: 1920x1080
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio driver: snd_hda_intel
    v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:a0c8
    class-ID: 0403
  Sound API: ALSA v: k6.2.8-zen1-1-zen running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.67 running: yes
Network:
  Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
    vendor: AzureWave driver: ath10k_pci v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 bus-ID: 01:00.0 chip-ID: 168c:0042 class-ID: 0280
  IF: wlp1s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Intel Ethernet I225-V driver: igc v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 port: N/A bus-ID: 02:00.0 chip-ID: 8086:15f3
    class-ID: 0200
  IF: enp2s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: IMC Networks type: USB driver: btusb v: 0.8 bus-ID: 2-1:2
    chip-ID: 13d3:3503 class-ID: e001
  Report: bt-adapter ID: hci0 rfk-id: 57 state: down
    bt-service: enabled,running rfk-block: hardware: no software: yes
    address: <filter>
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 238.47 GiB used: 85.6 GiB (35.9%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Patriot model: P210 256GB
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 3A0 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 134.12 GiB size: 134.12 GiB (100.00%)
    used: 85.58 GiB (63.8%) fs: btrfs block-size: 4096 B dev: /dev/sda6
    maj-min: 8:6 label: N/A uuid: a3aaae26-ab38-4149-85a1-09c9afda9c1e
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 27.7 MiB (28.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1
    label: SYSTEM uuid: B2BF-8B6A
  ID-3: /home raw-size: 134.12 GiB size: 134.12 GiB (100.00%)
    used: 85.58 GiB (63.8%) fs: btrfs block-size: 4096 B dev: /dev/sda6
    maj-min: 8:6 label: N/A uuid: a3aaae26-ab38-4149-85a1-09c9afda9c1e
  ID-4: /root raw-size: 134.12 GiB size: 134.12 GiB (100.00%)
    used: 85.58 GiB (63.8%) fs: btrfs block-size: 4096 B dev: /dev/sda6
    maj-min: 8:6 label: N/A uuid: a3aaae26-ab38-4149-85a1-09c9afda9c1e
  ID-5: /srv raw-size: 134.12 GiB size: 134.12 GiB (100.00%)
    used: 85.58 GiB (63.8%) fs: btrfs block-size: 4096 B dev: /dev/sda6
    maj-min: 8:6 label: N/A uuid: a3aaae26-ab38-4149-85a1-09c9afda9c1e
  ID-6: /var/cache raw-size: 134.12 GiB size: 134.12 GiB (100.00%)
    used: 85.58 GiB (63.8%) fs: btrfs block-size: 4096 B dev: /dev/sda6
    maj-min: 8:6 label: N/A uuid: a3aaae26-ab38-4149-85a1-09c9afda9c1e
  ID-7: /var/log raw-size: 134.12 GiB size: 134.12 GiB (100.00%)
    used: 85.58 GiB (63.8%) fs: btrfs block-size: 4096 B dev: /dev/sda6
    maj-min: 8:6 label: N/A uuid: a3aaae26-ab38-4149-85a1-09c9afda9c1e
  ID-8: /var/tmp raw-size: 134.12 GiB size: 134.12 GiB (100.00%)
    used: 85.58 GiB (63.8%) fs: btrfs block-size: 4096 B dev: /dev/sda6
    maj-min: 8:6 label: N/A uuid: a3aaae26-ab38-4149-85a1-09c9afda9c1e
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 7.5 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Unmounted:
  ID-1: /dev/sda2 maj-min: 8:2 size: 16 MiB fs: N/A label: N/A uuid: N/A
  ID-2: /dev/sda3 maj-min: 8:3 size: 102.63 GiB fs: ntfs label: Windows
    uuid: 01D8F7069D8938F0
  ID-3: /dev/sda4 maj-min: 8:4 size: 1000 MiB fs: vfat label: N/A
    uuid: 0244-B7B0
  ID-4: /dev/sda5 maj-min: 8:5 size: 650 MiB fs: ntfs label: Recovery
    uuid: 1CFEC3B4FEC3850C
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 2-1:2 info: IMC Networks type: Bluetooth driver: btusb
    interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 13d3:3503
    class-ID: e001
  Device-2: 2-5:3 info: Realtek RTS5129 Card Reader Controller
    type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
    interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
    class-ID: ff00 serial: <filter>
  Device-3: 2-7:4 info: Sunplus Innovation Hy-UXGA-Camera type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 1bcf:2ced class-ID: 0e02
  Hub-3: 3-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 41.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 224 Uptime: 10h 6m wakeups: 3 Init: systemd v: 253
  default: graphical tool: systemctl Compilers: gcc: 12.2.1 Packages:
  pm: pacman pkgs: 1324 libs: 375 tools: pamac,paru Shell: fish (sudo) v: 3.6.1
  default: Bash v: 5.1.16 running-in: gnome-terminal inxi: 3.3.25

[fasto]

[HowTo] Request support

Difficulty: ★☆☆☆☆ Strong of its many members, the Manjaro support forum can provide you help whenever you have an issue with your Manjaro installation. But in order to work efficiently, we shall also ask you to follow three major points. Provide context Simply signaling an issue is rarely enough to understand how it occurred. It is thus important to provide details on how it happened: Detail prior actions leading to the issue. List solutions and guides you already tried, with links when…

[9acca9]

I dont try nothing because i dont know how to approach this. I dont know how to search about this.
I already tell how this happens… i close the lid, then the cooler first turn off and after some seconds go on again, and after some other seconds, go off again and repeat.
I dont have more information.

[andreas85]

Welcome to Manjaro!

1. Please read the information behind this link. It will help you to post necessary information.

[HowTo] Provide System Information

2. Please press the three dots … below your post and then press the

• If you give us information about your system, we can see what we’re talking about and make better suggestions.
• You can do this by using inxi in a terminal or in console.

sudo inxi --admin --verbosity=7 --filter --no-host --width

• Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
• Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.

3. Copy the output from inxi (including the command) and paste it into your post.

• To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

(Wisdom lies in reading )

[9acca9]

hi. I edited the post! Thanks!

[fasto]

Thanks for including more information. Specifically, including a more detailed description of the problem like you did in your second post helps quite a bit.

• Is your computer set to sleep/suspend when closed, or hibernate?
• Try activating this mode without closing the computer (using a menu or systemctl or the like). What happens?
• When your cooler is turning on and off, does the computer feel hot? Did it feel hot before you closed it, or did it only heat up afterwards?