Hi.
As of this week my Manjaro OS is hanging in different moments. I think it’s related to some of the many updates I’ve ran last week since I was able to recover a snapshot from early march that seem to have solved my issues but they started again after I applied the recommended updates again.
The issues includes:
- Sudo commands take several minutes to show me the prompt asking for password
- System settings app doesn’t open / stops responding
- Mounting storage devices take a long time (several minutes)
- After the screen locks I’m unable to log back in. I’m able to type my password and it show the processing circle spinning like it’s processing, but it doesn’t unlock the screen, and if I click over the password it asks me for the password once more.
- I’m unable to access TTY terminals. If I press the shortcuts I get a black screen and never get the prompt to login. And I’m unable to change back to Gnome’s login screen, so I have to hard reset.
- Restart takes a couple of minutes after I press the restart button to show me the window asking me if I’m sure I want to restart the system.
This is the output of inxi -zv8:
System:
Kernel: 6.12.20-2-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.12-x86_64
root=UUID=ed3a5eec-a541-4bbc-9f12-089d4d259970 rw quiet
cryptdevice=UUID=4b8eb405-1a13-4110-88a5-77f1ff474311:luks-4b8eb405-1a13-4110-88a5-77f1ff474311
root=/dev/mapper/luks-4b8eb405-1a13-4110-88a5-77f1ff474311 splash
apparmor=1 security=apparmor
resume=/dev/mapper/luks-1c5f41b2-171c-43ea-bbce-393055ba5466
udev.log_priority=3
Desktop: GNOME v: 48.0 tk: GTK v: 3.24.49 wm: gnome-shell
tools: gsd-screensaver-proxy avail: lxlock dm: GDM v: 48.0 Distro: Manjaro
base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: A620M-HDV/M.2 serial: <superuser required>
uuid: <superuser required> UEFI: American Megatrends LLC. v: 2.10
date: 03/20/2024
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 64 GiB available: 61.92 GiB used: 4.39 GiB (7.1%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 128 GiB slots: 2 modules: 2 EC: None
max-module-size: 64 GiB note: est.
Device-1: Channel-A DIMM 0 type: DDR5 detail: synchronous unbuffered
(unregistered) size: 32 GiB speed: 4800 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: Kingston
part-no: KF552C40-32 serial: <filter>
Device-2: Channel-B DIMM 0 type: DDR5 detail: synchronous unbuffered
(unregistered) size: 32 GiB speed: 4800 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: Kingston
part-no: KF552C40-32 serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 9 7900X bits: 64 type: MT MCP arch: Zen 4 gen: 4
level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
model-id: 0x61 (97) stepping: 2 microcode: 0xA601209
Topology: cpus: 1x dies: 2 clusters: 2x1 cores: 12 threads: 24 tpc: 2
smt: enabled cache: L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 12 MiB
desc: 12x1024 KiB L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 5337 min/max: 400/5733 boost: enabled scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 5337 2: 5337 3: 5337
4: 5337 5: 5337 6: 5337 7: 5337 8: 5337 9: 5337 10: 5337 11: 5337 12: 5337
13: 5337 14: 5337 15: 5337 16: 5337 17: 5337 18: 5337 19: 5337 20: 5337
21: 5337 22: 5337 23: 5337 24: 5337 bogomips: 225285
Flags: 3dnowprefetch abm adx aes amd_lbr_pmc_freeze amd_lbr_v2 aperfmperf
apic arat avic avx avx2 avx512_bf16 avx512_bitalg avx512_vbmi2
avx512_vnni avx512_vpopcntdq avx512bw avx512cd avx512dq avx512f
avx512ifma avx512vbmi avx512vl bmi1 bmi2 bpext cat_l3 cdp_l3 clflush
clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm
cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de
decodeassists erms extapic extd_apicid f16c flush_l1d flushbyasid fma fpu
fsgsbase fsrm fxsr fxsr_opt gfni ht hw_pstate ibpb ibrs ibrs_enhanced ibs
invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw
overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core
perfctr_llc perfctr_nb perfmon_v2 pfthreshold pge pku pni popcnt pse
pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp
succor svm svm_lock syscall tce topoext tsc tsc_scale umip user_shstk
v_spec_ctrl vaes vgif vmcb_clean vme vmmcall vnmi vpclmulqdq wbnoinvd wdt
x2avic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves xtopology
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow mitigation: Safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
conditional; STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected;
BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA AD107 [GeForce RTX 4060] vendor: Gigabyte driver: nvidia
v: 570.133.07 alternate: nouveau,nvidia_drm non-free: 550/565.xx+
status: current (as of 2025-01) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 8
ports: active: none off: HDMI-A-3 empty: DP-4,DP-5,HDMI-A-2
bus-ID: 01:00.0 chip-ID: 10de:2882 class-ID: 0300
Device-2: Advanced Micro Devices [AMD/ATI] Raphael vendor: ASRock
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: none
empty: DP-1, DP-2, DP-3, HDMI-A-1, Writeback-1 bus-ID: 0e:00.0
chip-ID: 1002:164e class-ID: 0300 temp: 52.0 C
Device-3: Microdia Webcam Vitade AF driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-1:2
chip-ID: 0c45:6366 class-ID: 0102 serial: <filter>
Display: x11 server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: gnome-shell driver: X: loaded: amdgpu,nvidia
unloaded: modesetting,nouveau,radeon alternate: fbdev,nv,vesa
dri: radeonsi gpu: nvidia,nvidia-nvswitch display-ID: :0
note: <missing: xdpyinfo/xrandr>
Monitor-1: HDMI-A-3 model: Samsung LU28R55 serial: <filter> built: 2024
res: 3840x2160 dpi: 154 gamma: 1.2 chroma: red: x: 0.678 y: 0.314 green:
x: 0.267 y: 0.620 blue: x: 0.145 y: 0.059 white: x: 0.314 y: 0.329
size: 632x360mm (24.88x14.17") diag: 727mm (28.6") ratio: 16:9
modes: 3840x2160, 2560x1440, 1920x1080, 1680x1050, 1600x900, 1280x1024,
1440x900, 1280x800, 1152x864, 1280x720, 1024x768, 800x600, 720x576,
720x480, 640x480
EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid:
unhandled CEA mode 96 3: parse_edid: unhandled CEA mode 95
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia gbm:
drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia inactive: wayland
API: OpenGL v: 4.6.0 vendor: nvidia v: 570.133.07 glx-v: 1.4
direct-render: yes renderer: NVIDIA GeForce RTX 4060/PCIe/SSE2
memory: 7.81 GiB
Info: Tools: api: eglinfo,glxinfo gpu: nvidia-settings,nvidia-smi
x11: xprop
Audio:
Device-1: NVIDIA AD107 High Definition Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 10de:22be class-ID: 0403
Device-2: Advanced Micro Devices [AMD/ATI] Rembrandt Radeon High
Definition Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0e:00.1 chip-ID: 1002:1640 class-ID: 0403
Device-3: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: ASRock driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 0e:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-4: Microdia Webcam Vitade AF driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-1:2
chip-ID: 0c45:6366 class-ID: 0102 serial: <filter>
API: ALSA v: k6.12.20-2-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: ASRock driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: e000 bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp7s0 state: down mac: <filter>
Device-2: TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano]
driver: rtl8821au type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0
bus-ID: 1-9:3 chip-ID: 2357:011e class-ID: 0000 serial: <filter>
IF: wlp11s0u9 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: tun0 state: unknown speed: 10000 Mbps duplex: full mac: N/A
IP v4: <filter> scope: global
IP v6: <filter> scope: global
IP v6: <filter> virtual: stable-privacy proto kernel_ll scope: link
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
Device-1: luks-8b006311-8a63-42c6-afcf-b4ae4d131151 maj-min: 254:2
type: LUKS dm: dm-2 size: 2.73 TiB
Components:
p-1: sda1 maj-min: 8:1 size: 2.73 TiB
Device-2: luks-4b8eb405-1a13-4110-88a5-77f1ff474311 maj-min: 254:0
type: LUKS dm: dm-0 size: 1.8 TiB
Components:
p-1: nvme0n1p2 maj-min: 259:2 size: 1.8 TiB
Device-3: luks-1c5f41b2-171c-43ea-bbce-393055ba5466 maj-min: 254:1
type: LUKS dm: dm-1 size: 68.11 GiB
Components:
p-1: nvme0n1p3 maj-min: 259:3 size: 68.11 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 4.59 TiB used: 2.24 TiB (48.8%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Seagate
model: XPG GAMMIX S70 BLADE size: 1.86 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 3.2.J.JE temp: 51.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3000VX015-3CV10G
size: 2.73 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5400 serial: <filter> fw-rev: CV10 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 1.8 TiB size: 1.77 TiB (98.37%) used: 347.29 GiB (19.2%)
fs: ext4 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-4b8eb405-1a13-4110-88a5-77f1ff474311 label: N/A
uuid: ed3a5eec-a541-4bbc-9f12-089d4d259970
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 448 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
uuid: 8462-668E
ID-3: /mnt/hdinterno01 raw-size: 2.73 TiB size: 2.69 TiB (98.39%)
used: 1.9 TiB (70.8%) fs: ext4 dev: /dev/dm-2 maj-min: 254:2
mapped: luks-8b006311-8a63-42c6-afcf-b4ae4d131151 label: HD Interno 1
uuid: 76efe9ad-8f12-45da-921b-5d8e62e5dfb8
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 68.11 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/dm-1 maj-min: 254:1
mapped: luks-1c5f41b2-171c-43ea-bbce-393055ba5466 label: swap
uuid: fb220f77-a209-4304-aaf4-ec12a341b2ce
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-5:2 info: Logitech G403 HERO Gaming Mouse type: mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c08f class-ID: 0300
serial: <filter>
Device-2: 1-9:3 info: TP-Link AC600 wireless Realtek RTL8811AU [Archer
T2U Nano] type: Network driver: rtl8821au interfaces: 1 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 2357:011e class-ID: 0000 serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 5-1:2 info: Microdia Webcam Vitade AF type: video,audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 0c45:6366 class-ID: 0102 serial: <filter>
Hub-6: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-7: 7-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 7-1:2 info: SiGma Micro Keyboard TRACER Gamma Ivory
type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 98mA
chip-ID: 1c4f:0002 class-ID: 0300
Hub-8: 8-0:1 info: Linux Foundation 3.0 root hub ports: N/A rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 75.2 C mobo: 41.8 C
Fan Speeds (rpm): N/A
GPU: device: nvidia screen: :0.0 temp: 41 C fan: 0% device: amdgpu
temp: 52.0 C
Repos:
Packages: pm: pacman pkgs: 1490 libs: 385 tools: gnome-software,pamac,yay
pm: flatpak pkgs: 0
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirrors2.manjaro.org/stable/$repo/$arch
2: https://mnvoip.mm.fcix.net/manjaro/stable/$repo/$arch
3: http://mirror.fcix.net/manjaro/stable/$repo/$arch
4: https://ipng.mm.fcix.net/manjaro/stable/$repo/$arch
5: https://mirrors.gigenet.com/manjaro/stable/$repo/$arch
6: https://mirror.23m.com/manjaro/stable/$repo/$arch
7: https://ftpmirror1.infania.net/mirror/manjaro/stable/$repo/$arch
8: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/stable/$repo/$arch
Processes:
CPU top: 5 of 515
1: cpu: 92.3% command: @lymouthd pid: 420 mem: 15.4 MiB (0.0%)
2: cpu: 17.7% command: kdenlive pid: 3340 mem: 1266.2 MiB (1.9%)
3: cpu: 6.9% command: gnome-shell pid: 2125 mem: 404.6 MiB (0.6%)
4: cpu: 5.6% command: exe pid: 3869 mem: 414.0 MiB (0.6%)
5: cpu: 4.4% command: Xorg pid: 2028 mem: 234.0 MiB (0.3%)
Memory top: 5 of 515
1: mem: 1266.2 MiB (1.9%) command: kdenlive pid: 3340 cpu: 17.7%
2: mem: 414.0 MiB (0.6%) command: exe pid: 3869 cpu: 5.6%
3: mem: 404.6 MiB (0.6%) command: gnome-shell pid: 2125 cpu: 6.9%
4: mem: 382.4 MiB (0.6%) command: signal-desktop pid: 3760 cpu: 4.4%
5: mem: 253.4 MiB (0.3%) command: manjaro-hello started-by: python3
pid: 2366 cpu: 0.9%
Info:
Processes: 515 Power: uptime: 2m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 24.73 GiB services: gsd-power,upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.37 running-in: gnome-terminal
inxi: 3.3.37
This is the output of journalctl --boot=-1 --priority=3 --catalog --no-pager
abr 02 08:03:11 xxxx-a620mhdvm2 kernel: hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)
abr 02 08:03:12 xxxx-a620mhdvm2 kernel:
abr 02 08:03:12 xxxx-a620mhdvm2 kernel: usb 5-1: 3:1: cannot get freq at ep 0x84
abr 02 08:03:40 xxxx-a620mhdvm2 wpa_supplicant[1402]: bgscan simple: Failed to enable signal strength monitoring
abr 02 08:03:47 xxxx-a620mhdvm2 kernel: usb 5-1: 3:1: cannot get freq at ep 0x84
abr 02 08:03:47 xxxx-a620mhdvm2 kernel: usb 5-1: 3:1: cannot get freq at ep 0x84
abr 02 08:04:31 xxxx-a620mhdvm2 gdm-password][2002]: gkr-pam: unable to locate daemon control file
abr 02 08:04:33 xxxx-a620mhdvm2 systemd[2013]: Failed to start Application launched by gnome-session-binary.
░░ Subject: A unidade UNIT falhou
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A unidade UNIT falhou.
░░
░░ O resultado é failed.
abr 02 08:04:34 xxxx-a620mhdvm2 systemd[2013]: Failed to start Application launched by gnome-session-binary.
░░ Subject: A unidade UNIT falhou
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A unidade UNIT falhou.
░░
░░ O resultado é failed.
abr 02 08:50:04 xxxx-a620mhdvm2 systemd-logind[1310]: Failed to get load state of suspend.target: Connection timed out
abr 02 08:50:29 xxxx-a620mhdvm2 systemd-logind[1310]: Failed to get load state of poweroff.target: Connection timed out
abr 02 08:50:54 xxxx-a620mhdvm2 systemd-logind[1310]: Failed to get load state of reboot.target: Connection timed out
How do I solve this?
I’m pretty new to Manjaro so please let me know if I should provide more information and how to obtain it. Thanks!
UPDATE 1: I notice the issues aren’t happening as soon as I reboot the system, but they start after a couple of minutes.
