They have been there (with linux) since it was brand new. Iv had linux of one sort or another, with them there at boot, working fine on here for years.
They were there when Manjaro used to shutdown properly, and they will be there, if i reinstall it, and it again will shutdown properly.
yes thats true, but you still have hardware issues, either motherboard or cpu… update your bios to the latest…
Yes, updated bios but still the same, but you’re chasing fairies. There maybe a hardware problem that has been there forever, iv always thought its just the way linux boots, it seems to not like the very early power state when you have just started the boot process on this laptop, i dunno, but I’m not worried about it because it has been there forever.
Iv been testing the same distro from a live stick and it shuts down/reboots perfectly fine every single time. Its a bug or mess-up of my doing somewhere in the os/application/software, i’d bet my house on it.
well you did mentioned that you have to reinstall your system every 6 months…
also run fsck on your drive just to be sure…
also you need to probably reinstall again, because you have there a lot of errors, but thats up to you…
try switching to different kernels and try with them: 5.18 and 5.10
I only have to reinstall because i get a bug after an update that no one can help with. There are a whole load of problems in-between that that people can help with, and they are not hardware issues, its just the usual banging your head against a wall linux experience (im talking multi systems, not just this lappy). Besides, if whatever was not working is working after a reinstall then it can’t be hardware? If it works of a live stick it can’t really be the hardware, can it?
Hmm, yea the next kernels, i have already tried them, not due to this problem but just to keep up to date. Problem was leaving this LTS to anything higher started causing the sleep failure again. It wont go to sleep when the lid is closed. This kernel fine, no problem (well ^^). You might say well there you go but i don’t see it. It had the sleep problem some years back, then it got fixed now it might return, how can that possibly be hardware.
I shall give the latest one another try, it was quite a while ago that i tried, we shall see.
there a post here from people whos live usb worked perfectly, then they installed it, and bum system doesnt work properly - audio, wifi, etc…
yes try the 5.18 and if the sleep works with it, then just reinstall, because of those x11 and other errors… when you in the live usb, open ksystemlog app select priorities: emer, aler, critic, warning, error and check if there are the same errors as you have now
well i did grab a priority 4 log, and as far as i can tell its just the way linux is, there is always errors and warnings even in a brand-new system
But yes, the topmost hardware errors are still there but as i say, they are, and have always been there.
~ journalctl -p 4 ✔
Jun 30 09:44:22 manjaro kernel: DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x000000008d000000-0x000000008f7fffff], contact BIOS vendor for fixes
Jun 30 09:44:22 manjaro kernel: DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x000000008d000000-0x000000008f7fffff]
BIOS vendor: Dell Inc.; Ver: 1.5.0; Product Version:
Jun 30 09:44:22 manjaro kernel: x86/cpu: SGX disabled by BIOS.
Jun 30 09:44:22 manjaro kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
Jun 30 09:44:22 manjaro kernel: MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
Jun 30 09:44:22 manjaro kernel: #3
Jun 30 09:44:22 manjaro kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Jun 30 09:44:22 manjaro kernel: ata1.00: supports DRM functions and may not be fully accessible
Jun 30 09:44:22 manjaro kernel: ata1.00: supports DRM functions and may not be fully accessible
Jun 30 09:44:22 manjaro kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ee0000000040110a
Jun 30 09:44:22 manjaro kernel: mce: [Hardware Error]: TSC 0 ADDR fef1ce80 MISC 43880014086
Jun 30 09:44:22 manjaro kernel: mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1656582254 SOCKET 0 APIC 0 microcode f0
Jun 30 09:44:22 manjaro kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee0000000040110a
Jun 30 09:44:22 manjaro kernel: mce: [Hardware Error]: TSC 0 ADDR fef1ce40 MISC 7880014086
Jun 30 09:44:22 manjaro kernel: mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1656582254 SOCKET 0 APIC 0 microcode f0
Jun 30 09:44:22 manjaro kernel: wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
Jun 30 09:44:22 manjaro kernel: i8042: Warning: Keylock active
Jun 30 09:44:22 manjaro kernel: overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
Jun 30 09:44:23 manjaro systemd-udevd[339]: Configuration file /usr/lib/udev/rules.d/77-mm-fibocom-port-types.rules is marked executable. Please remove executable permission bits. Proceeding anyway.
Jun 30 09:44:23 manjaro kernel: ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20210730/nsprepkg-94)
Jun 30 09:44:23 manjaro kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
Jun 30 09:44:23 manjaro kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
Jun 30 09:44:24 manjaro systemd-udevd[359]: cfg80211: Process '/usr/bin/set-wireless-regdom' failed with exit code 1.
Jun 30 09:44:25 manjaro kernel: thermal thermal_zone6: failed to read out thermal zone (-61)
Jun 30 09:44:25 manjaro systemd-udevd[358]: controlC0: Process '/usr/bin/alsactl restore 0' failed with exit code 99.
Jun 30 09:44:28 manjaro kernel: kauditd_printk_skb: 21 callbacks suppressed
Jun 30 09:44:30 manjaro systemd-xdg-autostart-generator[786]: Configuration file /home/manjaro/.config/autostart/pulseaudio-ctl.desktop is marked executable. Please remove executable permission bits. Proceeding >
Jun 30 09:44:30 manjaro systemd-xdg-autostart-generator[786]: Configuration file /home/manjaro/.config/autostart/live-session.desktop is marked executable. Please remove executable permission bits. Proceeding an>
Jun 30 09:44:30 manjaro systemd-xdg-autostart-generator[786]: Configuration file /home/manjaro/.config/autostart/disable-dpms.desktop is marked executable. Please remove executable permission bits. Proceeding an>
Jun 30 09:44:31 manjaro startplasma-x11[796]: QIODevice::read (QFile, "/home/manjaro/.config/kdedefaults/package"): device not open
Jun 30 09:44:31 manjaro startplasma-x11[796]: QDBusConnection: error: could not send signal to service "" path "//home/manjaro/.config/kdedefaults/kdeglobals" interface "org.kde.kconfig.notify" member "ConfigCha>
Jun 30 09:44:31 manjaro startplasma-x11[796]: QDBusConnection: error: could not send signal to service "" path "//home/manjaro/.config/kdedefaults/kdeglobals" interface "org.kde.kconfig.notify" member "ConfigCha>
Jun 30 09:44:31 manjaro startplasma-x11[796]: QDBusConnection: error: could not send signal to service "" path "//home/manjaro/.config/kdedefaults/kdeglobals" interface "org.kde.kconfig.notify" member "ConfigCha>
Jun 30 09:44:31 manjaro startplasma-x11[796]: QDBusConnection: error: could not send signal to service "" path "//home/manjaro/.config/kdedefaults/kcminputrc" interface "org.kde.kconfig.notify" member "ConfigCha>
Jun 30 09:44:31 manjaro startplasma-x11[796]: QDBusConnection: error: could not send signal to service "" path "//home/manjaro/.config/kdedefaults/kwinrc" interface "org.kde.kconfig.notify" member "ConfigChanged>
Jun 30 09:44:31 manjaro ksplashqml[804]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath.desktop/contents/splash/Splash.qml:49: ReferenceError: maxWidth is not defined
Jun 30 09:44:31 manjaro ksplashqml[804]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath.desktop/contents/splash/Splash.qml:81:29: Unable to assign int to QEasingCurve
Jun 30 09:44:31 manjaro startplasma-x11[796]: QPixmap: QGuiApplication must be created before calling defaultDepth().
Jun 30 09:44:31 manjaro startplasma-x11[796]: QPixmap: QGuiApplication must be created before calling defaultDepth().
Jun 30 09:44:31 manjaro startplasma-x11[796]: QDBusConnection: error: could not send signal to service "" path "//home/manjaro/.kde4/share/config/kdeglobals" interface "org.kde.kconfig.notify" member "ConfigChan>
Jun 30 09:44:32 manjaro klauncher[934]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Jun 30 09:44:32 manjaro kcminit_startup[978]: QDBusConnection: error: could not send signal to service "" path "//home/manjaro/.kde4/share/config/kdeglobals" interface "org.kde.kconfig.notify" member "ConfigChan>
Jun 30 09:44:32 manjaro kwin_x11[1089]: Warning: Setting a new default format with a different version or profile after the global shared context is created may cause issues with context sharing.
Jun 30 09:44:32 manjaro kwin_x11[1089]: kwin_xkbcommon: XKB: inet:323:58: unrecognized keysym "XF86EmojiPicker"
Jun 30 09:44:32 manjaro kwin_x11[1089]: kwin_xkbcommon: XKB: inet:324:58: unrecognized keysym "XF86Dictate"
Jun 30 09:44:33 manjaro ksmserver[1135]: Qt: Session management error: networkIdsList argument is NULL
Jun 30 09:44:33 manjaro kernel: kauditd_printk_skb: 32 callbacks suppressed
Jun 30 09:44:33 manjaro breath2tobreath[1160]: QApplication::qAppName: Please instantiate the QApplication object first
Jun 30 09:44:33 manjaro breath2tobreath[1160]: QApplication::qAppName: Please instantiate the QApplication object first
Jun 30 09:44:33 manjaro breath2tobreath[1160]: QSocketNotifier: Can only be used with threads started with QThread
Jun 30 09:44:33 manjaro breath2tobreath[1160]: QCoreApplication::arguments: Please instantiate the QApplication object first
Jun 30 09:44:33 manjaro breath2tobreath[1160]: QApplication::qAppName: Please instantiate the QApplication object first
Jun 30 09:44:33 manjaro breath2tobreath[1160]: QApplication::qAppName: Please instantiate the QApplication object first
Jun 30 09:44:34 manjaro kwin_x11[1089]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 757, resource id: 10485765, major code: 18 (ChangeProperty), minor code: 0
Jun 30 09:44:34 manjaro kwin_x11[1089]: kwin_core: XCB error: 10 (BadAccess), sequence: 820, resource id: 1945, major code: 142 (Composite), minor code: 2 (RedirectSubwindows)
Jun 30 09:44:34 manjaro gst-plugin-scan[1226]: type name '-a-png-encoder-pred' contains invalid characters
Jun 30 09:44:34 manjaro gst-plugin-scan[1226]: g_type_set_qdata: assertion 'node != NULL' failed
Jun 30 09:44:34 manjaro gst-plugin-scan[1226]: g_type_set_qdata: assertion 'node != NULL' failed
Jun 30 09:44:34 manjaro org_kde_powerdevil[1143]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds not supported"
Jun 30 09:44:34 manjaro gst-plugin-scan[1226]: type name '-a-png-encoder-pred' contains invalid characters
Jun 30 09:44:34 manjaro gst-plugin-scan[1226]: g_type_set_qdata: assertion 'node != NULL' failed
Jun 30 09:44:34 manjaro gst-plugin-scan[1226]: g_type_set_qdata: assertion 'node != NULL' failed
Jun 30 09:44:35 manjaro org_kde_powerdevil[1143]: org.kde.powerdevil: Handle button events action could not check for screen configuration
Jun 30 09:44:35 manjaro org_kde_powerdevil[1143]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds not supported"
Jun 30 09:44:35 manjaro baloo_file[1149]: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.43'
Jun 30 09:44:35 manjaro pulseaudio[1170]: stat('/etc/pulse/default.pa.d'): No such file or directory
Jun 30 09:44:35 manjaro kded5[1038]: QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.11'
Jun 30 09:44:36 manjaro plasmashell[1145]: qml: PlasmaExtras.ScrollArea is deprecated. Use PlasmaComponents3.ScrollView instead.
Jun 30 09:44:36 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.panel/contents/ui/main.qml:18:1: QML DropArea: Binding loop detected for property "spacingAtMinSize"
Jun 30 09:44:36 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.panel/contents/ui/main.qml:18:1: QML DropArea: Binding loop detected for property "spacingAtMinSize"
Jun 30 09:44:36 manjaro plasmashell[1145]: <Unknown File>: QML QQuickAnchors: Binding loop detected for property "leftMargin"
Jun 30 09:44:36 manjaro plasmashell[1145]: Trying to use rootObject before initialization is completed, whilst using setInitializationDelayed. Forcing completion
Jun 30 09:44:36 manjaro plasmashell[1145]: Entry is not valid "org.kde.kontact.desktop" QSharedPointer(0x55c618fe52b0)
Jun 30 09:44:36 manjaro plasmashell[1145]: Entry is not valid "ktp-contactlist.desktop" QSharedPointer(0x55c618fe50f0)
Jun 30 09:44:36 manjaro plasmashell[1145]: Entry is not valid "org.kde.discover.desktop" QSharedPointer(0x55c618fe50a0)
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: QDBusConnection: error: could not send signal to service "" path "/plasma-org.kde.plasma.desktop-appletsrc" interface "org.kde.kconfig.notify" member "ConfigChanged": I>
Jun 30 09:44:36 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.plasma.digitalclock/contents/ui/DigitalClock.qml:530:9: QML Label: Binding loop detected for property "height"
Jun 30 09:44:36 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.plasma.digitalclock/contents/ui/DigitalClock.qml:495:13: QML Label: Binding loop detected for property "height"
Jun 30 09:44:36 manjaro plasmashell[1145]: Activity added twice "47f063cc-56eb-4f25-b0c0-a48dadbd831c"
Jun 30 09:44:37 manjaro plasmashell[1145]: org.kde.klipper: Failed to load history resource. Clipboard history cannot be read. : History file does not exist
Jun 30 09:44:37 manjaro plasmashell[1145]: Cyclic dependency detected between "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml" and "file:///usr/share/plasma/plasmo>
Jun 30 09:44:37 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.plasma.private.systemtray/contents/ui/ExpandedRepresentation.qml:165:9: QML HiddenItemsView: Binding loop detected for proper>
Jun 30 09:44:37 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.plasma.digitalclock/contents/ui/DigitalClock.qml:495:13: QML Label: Binding loop detected for property "height"
Jun 30 09:44:37 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.plasma.digitalclock/contents/ui/DigitalClock.qml:530:9: QML Label: Binding loop detected for property "height"
Jun 30 09:44:37 manjaro plasmashell[1145]: file:///usr/share/plasma/plasmoids/org.kde.plasma.digitalclock/contents/ui/DigitalClock.qml:552:5: QML Label: Binding loop detected for property "height"
Jun 30 09:44:37 manjaro plasmashell[1145]: Entry is not valid "org.kde.kontact.desktop" QSharedPointer(0x55c6194ff970)
Jun 30 09:44:37 manjaro plasmashell[1145]: Entry is not valid "ktp-contactlist.desktop" QSharedPointer(0x55c6195007f0)
Jun 30 09:44:37 manjaro plasmashell[1145]: Entry is not valid "org.kde.discover.desktop" QSharedPointer(0x55c6194ff9c0)
Jun 30 09:44:37 manjaro plasmashell[1145]: Entry is not valid "org.kde.kontact.desktop" QSharedPointer(0x55c619500840)
Jun 30 09:44:37 manjaro plasmashell[1145]: Entry is not valid "ktp-contactlist.desktop" QSharedPointer(0x55c619ae6c50)
Jun 30 09:44:37 manjaro plasmashell[1145]: Entry is not valid "org.kde.discover.desktop" QSharedPointer(0x55c619b325c0)
Jun 30 09:44:37 manjaro plasmashell[1145]: QFont::setPointSizeF: Point size <= 0 (0.000000), must be greater than 0
Jun 30 09:44:38 manjaro kwin_x11[1089]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 3361, resource id: 4194357, major code: 18 (ChangeProperty), minor code: 0
Jun 30 09:44:38 manjaro kernel: psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
Jun 30 09:44:40 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:40 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:40 manjaro kwin_x11[1089]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 3737, resource id: 4194310, major code: 18 (ChangeProperty), minor code: 0
Jun 30 09:44:40 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:40 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:40 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:40 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:40 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:40 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:40 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:40 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:40 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:42 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:42 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:42 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:42 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:42 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:42 manjaro plasmashell[1145]: Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
Jun 30 09:44:42 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:42 manjaro plasmashell[1145]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Jun 30 09:44:42 manjaro kwin_x11[1089]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 4080, resource id: 54525962, major code: 15 (QueryTree), minor code: 0
Jun 30 09:44:43 manjaro kernel: psmouse serio1: Failed to enable mouse on isa0060/serio1
Jun 30 09:44:43 manjaro kwin_x11[1089]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 4295, resource id: 4194309, major code: 18 (ChangeProperty), minor code: 0
Jun 30 09:44:48 manjaro plasmashell[1145]: trying to show an empty dialog
Jun 30 09:44:55 manjaro kernel: kauditd_printk_skb: 6 callbacks suppressed
~
this looks good, its look like normal plasma logs, except those mce errors… so on live usb everything looks good…
Yea, normal. So all my log errors have been accumulated over time via software changes, updates, me tinkering blindly etc
yes it looks like it…
What about all this stuff? Should i put it back to how it was?
yes, i have it disabled, even though i had no issue with it, its just another unnecessary service, so just disable it…
did you check logs in the new installation, if everything is ok?
Im not doing a new installation. I dont have the time or energy. I hardly ever actually do a reboot/shutdown so meh. When im feeling a bit better i might get to it, but not ATM.
However, thank you for time and support 
Your NAS is the culprit. The timeout for mounting/unmounting should be decreased (or rather a systemd automount should be used rather than in fstab).
Ok, so how do i decrees the timeout for that?
Regarding the mount at boot, i have already been through all of this without remedy yet System will not mount NAS at boot, although the mount does work fine after its finished booting
I’m reading this kwin_x11 and QDBusConnection hanging on shutdown/reboot / Newbie Corner / Arch Linux Forums and this Kwin_x11 not stopping during shutdown
Looks very similar
My logs at the 90 second “block”
Jun 30 11:19:46 greg-inspiron5767 sddm[536]: Signal received: SIGTERM
Jun 30 11:19:47 greg-inspiron5767 sddm[536]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
Jun 30 11:21:15 greg-inspiron5767 systemd[1]: session-1.scope: Stopping timed out. Killing.
Jun 30 11:21:15 greg-inspiron5767 systemd[1]: session-1.scope: Killing process 1023 (kded5) with signal SIGKILL.
Jun 30 11:21:15 greg-inspiron5767 systemd[1]: session-1.scope: Killing process 1029 (n/a) with signal SIGKILL.
Jun 30 11:21:15 greg-inspiron5767 systemd[1]: session-1.scope: Killing process 1030 (n/a) with signal SIGKILL.
Jun 30 11:21:15 greg-inspiron5767 systemd[1]: session-1.scope: Killing process 1031 (gdbus) with signal SIGKILL.
Jun 30 11:21:15 greg-inspiron5767 systemd[1]: session-1.scope: Failed with result 'timeout'.
theirs
Nov 11 16:47:37 iris sddm[676]: Signal received: SIGTERM
Nov 11 16:47:38 iris sddm[676]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
Nov 11 16:47:38 iris systemd[1]: sddm.service: Consumed 18.465s CPU time.
Nov 11 16:49:06 iris systemd[1]: session-1.scope: Stopping timed out. Killing.
Nov 11 16:49:06 iris systemd[1]: session-1.scope: Killing process 953 (kwin_x11) with signal SIGKILL.
Nov 11 16:49:06 iris systemd[1]: session-1.scope: Killing process 1005 (n/a) with signal SIGKILL.
Nov 11 16:49:06 iris systemd[1]: session-1.scope: Killing process 1138 (CPMMListener) with signal SIGKILL.
Nov 11 16:49:06 iris systemd[1]: session-1.scope: Killing process 2238 (n/a) with signal SIGKILL.
Nov 11 16:49:06 iris systemd[1]: session-1.scope: Failed with result 'timeout'.
Tell me it’s not an arch/Manjaro bug.
Ok so we found that this is a known bug and according to some has been fixed but what does that mean to Manjaro? When does that get pushed to myself?
https://bugs.kde.org/show_bug.cgi?id=453928
https://bbs.archlinux.org/viewtopic.php?pid=2043682#p2043682
https://bbs.archlinux.org/viewtopic.php?pid=2042035#p2042035
p.s. I did try not mounting all my NAS but that did not work.
i had same problem.
i did two things.
change your kernel in settings (better to previous versions and of course LTS ones.)
instal all graphic driver (especially ones who has linux name)
Sorry about the late response. This computer is at work and I didn’t have access to it until today. I’m not quite following your instructions. Could you elaborate in detail where to enter what?
Here’s my grub info:
GRUB_DEFAULT=“Advanced options for Manjaro Linux>Manjaro Linux”
GRUB_TIMEOUT=4
GRUB_TIMEOUT_STYLE=no
GRUB_DISTRIBUTOR=“Manjaro”
GRUB_CMDLINE_LINUX_DEFAULT="quiet cryptdevice=UUID=e077faba-536a-4f55-8298…
@fhins please open a new topic with all needed and related info.
It is unclear what your personal problem has todo with this topic besides the title…
Slipping in your own problem in a topic with a similar but not same problem is called thread-hijacking…
The grub config you show is already missing info…