I can’t suspend the machine and apparently ignores my request and asks me to log in again (which I can). But once I log in my external HD is no longer accesible.
Linux LTS 6.6.47-1. Manjaro 24.0.8
Please provide some system information, at the very least. As it stands, you have provided no actionable information for others to help with.
inxi --admin --verbosity=8 --filter --no-host --width
Logs may also be useful;
journalctl --boot=-1 --priority=3 --catalog --no-pager
Kernel: 6.6.47-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
root=UUID=0b905aaa-f47a-433c-9c9b-036e6559c3b4 rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.43 wm: xfwm4 v: 4.18.0
with: xfce4-panel tools: light-locker vt: 7 dm: LightDM v: 1.32.0
Distro: Manjaro base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: A320M PRO-M2 V2 (MS-7B84) v: 2.0
serial: <superuser required> uuid: <superuser required>
UEFI: American Megatrends v: 3.10 date: 01/30/2019
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 8 GiB available: 5.74 GiB used: 2.45 GiB (42.8%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 256 GiB note: check slots: 2 modules: 1 EC: None
max-module-size: 128 GiB note: est.
Device-1: Channel-A DIMM 0 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: spec: 3200 MT/s actual: 1600 MT/s volts:
note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
manufacturer: Crucial part-no: BLS8G4D32AESTK.M8FE1 serial: <filter>
Device-2: Channel-B DIMM 0 type: no module installed
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 3 2200G with Radeon Vega Graphics bits: 64 type: MCP
arch: Zen level: v3 note: check built: 2017-19 process: GF 14nm
family: 0x17 (23) model-id: 0x11 (17) stepping: 0 microcode: 0x810100B
Topology: cpus: 1x cores: 3 smt: <unsupported> cache: L1: 288 KiB
desc: d-3x32 KiB; i-3x64 KiB L2: 1.5 MiB desc: 3x512 KiB L3: 4 MiB
desc: 1x4 MiB
Speed (MHz): avg: 1710 high: 2260 min/max: 1600/3500 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1429 2: 2260
3: 1442 bogomips: 21007
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb
cpuid cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c
flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf
lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor movbe msr mtrr
mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat
pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdrand rdseed rdtscp rep_good
sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2
sse4a ssse3 succor svm svm_lock syscall tce topoext tsc tsc_scale
v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt xgetbv1 xsave xsavec
xsaveerptr xsaveopt
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_rstack_overflow mitigation: SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP:
disabled; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Mobile Series]
vendor: Micro-Star MSI driver: amdgpu v: kernel arch: GCN-5 code: Vega
process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 ports:
active: HDMI-A-1 off: DP-2 empty: DP-1,DVI-D-1 bus-ID: 38:00.0
chip-ID: 1002:15dd class-ID: 0300 temp: 41.0 C
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.2
compositor: xfwm4 v: 4.18.0 driver: X: loaded: amdgpu
unloaded: modesetting,vesa alternate: fbdev dri: radeonsi gpu: amdgpu
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26")
s-diag: 583mm (22.95")
Monitor-1: DP-2 mapped: DisplayPort-1 note: disabled model: DP2VGA V235
built: 2015 res: N/A dpi: 43 gamma: 1.2 chroma: red: x: 0.639 y: 0.349 green:
x: 0.318 y: 0.627 blue: x: 0.145 y: 0.059 white: x: 0.314 y: 0.329
size: 256x192mm (10.08x7.56") diag: 690mm (27.2") ratio: 16:9
modes: 1024x768, 1920x1080, 1600x1200, 1680x1050, 1400x1050, 1600x900,
1280x1024, 1440x900, 1280x960, 1366x768, 1280x720, 800x600, 640x480
Monitor-2: HDMI-A-1 mapped: HDMI-A-0 pos: primary model: IQ24H
serial: <filter> built: 2020 res: 1920x1080 dpi: 94 gamma: 1.2 chroma: red:
x: 0.651 y: 0.337 green: x: 0.282 y: 0.604 blue: x: 0.141 y: 0.071 white:
x: 0.314 y: 0.329 size: 520x300mm (20.47x11.81") diag: 600mm (23.6")
ratio: 16:9 modes: 1920x1080, 1600x1200, 1680x1050, 1600x900, 1280x1024,
1440x900, 1280x960, 1280x800, 1280x720, 1024x768, 800x600, 720x576,
720x480, 640x480, 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.1.6-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Vega 8 Graphics (radeonsi
raven LLVM 18.1.8 DRM 3.54 6.6.47-1-MANJARO) device-ID: 1002:15dd
memory: 1.95 GiB unified: no
API: Vulkan v: 1.3.279 layers: 4 device: 0 type: integrated-gpu name: AMD
Radeon Vega 8 Graphics (RADV RAVEN) driver: mesa radv v: 24.1.6-arch1.1
device-ID: 1002:15dd surfaces: xcb,xlib
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 38:00.1
chip-ID: 1002:15de class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 38:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.6.47-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: PipeWire v: 1.2.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 1b:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp27s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: br10 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-2: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
Info: services: NetworkManager, nginx, systemd-timesyncd
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 223.58 GiB used: 123.49 GiB (55.2%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: WDC WDS240G2G0A-00JH30
size: 223.58 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 0000 scheme: GPT
Optical-1: /dev/sr0 vendor: ATAPI model: iHAS122 F rev: EL9M
dev-links: cdrom
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r state: running
Partition:
ID-1: / raw-size: 50 GiB size: 48.16 GiB (96.33%) used: 40.29 GiB (83.7%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: 0b905aaa-f47a-433c-9c9b-036e6559c3b4
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL
uuid: AED9-11AC
ID-3: /run/media/manjaro/40f6c76a-e547-41b1-b34b-2ea459c9eab4/Data
raw-size: 173.28 GiB size: 169.5 GiB (97.82%) used: 83.2 GiB (49.1%) fs: ext4
dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 40f6c76a-e547-41b1-b34b-2ea459c9eab4
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: file size: 4 GiB used: 211.8 MiB (5.2%) priority: -2
file: /run/media/manjaro/40f6c76a-e547-41b1-b34b-2ea459c9eab4/Data/swapfile
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 9 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-5:2 info: SiGma Micro Keyboard TRACER Gamma Ivory
type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 98mA
chip-ID: 1c4f:0002 class-ID: 0300
Device-2: 1-6:3 info: Logitech Nano Receiver type: keyboard,mouse
driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c534 class-ID: 0301
Device-3: 1-7:4 info: Super Top Elecom MR-K013 Multicard Reader
type: mass storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 400mA
chip-ID: 14cd:168a class-ID: 0806 serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 3 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-6: 6-0:1 info: super-speed hub ports: 1 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 39.8 C mobo: N/A gpu: amdgpu temp: 39.0 C
Fan Speeds (rpm): N/A
Repos:
Packages: 2240 pm: pacman pkgs: 2197 libs: 496 tools: pamac,trizen,yay
pm: flatpak pkgs: 24 pm: snap pkgs: 19
Active pacman repo servers in: /etc/pacman.d/chaotic-mirrorlist
1: https://cdn-mirror.chaotic.cx/$repo/$arch
2: https://geo-mirror.chaotic.cx/$repo/$arch
3: https://br-mirror.chaotic.cx/$repo/$arch
4: https://bg-mirror.chaotic.cx/$repo/$arch
5: https://ca-mirror.chaotic.cx/$repo/$arch
6: https://cl-mirror.chaotic.cx/$repo/$arch
7: https://de-2-mirror.chaotic.cx/$repo/$arch
8: https://de-3-mirror.chaotic.cx/$repo/$arch
9: https://de-4-mirror.chaotic.cx/$repo/$arch
10: https://fr-mirror.chaotic.cx/$repo/$arch
11: https://gr-mirror.chaotic.cx/$repo/$arch
12: https://in-mirror.chaotic.cx/$repo/$arch
13: https://in-2-mirror.chaotic.cx/$repo/$arch
14: https://in-3-mirror.chaotic.cx/$repo/$arch
15: https://in-4-mirror.chaotic.cx/$repo/$arch
16: https://kr-mirror.chaotic.cx/$repo/$arch
17: https://es-mirror.chaotic.cx/$repo/$arch
18: https://es-2-mirror.chaotic.cx/$repo/$arch
19: https://us-mi-mirror.chaotic.cx/$repo/$arch
20: https://us-tx-mirror.chaotic.cx/$repo/$arch
21: https://us-ut-mirror.chaotic.cx/$repo/$arch
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://manjaro.kurdy.org/stable/$repo/$arch
2: https://coresite.mm.fcix.net/manjaro/stable/$repo/$arch
3: https://nocix.mm.fcix.net/manjaro/stable/$repo/$arch
4: https://manjaro.mirrors.lavatech.top/stable/$repo/$arch
5: http://ossmirror.mycloud.services/os/linux/manjaro/stable/$repo/$arch
6: http://manjaro.mirrors.uk2.net/stable/$repo/$arch
7: https://mirror.yandex.ru/mirrors/manjaro/stable/$repo/$arch
8: https://mirror.easyname.at/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 243
1: cpu: 11.1% command: librewolf pid: 10080 mem: 498.3 MiB (8.4%)
2: cpu: 4.3% command: bash pid: 11852 mem: 9.68 MiB (0.1%)
3: cpu: 3.7% command: librewolf pid: 10236 mem: 320.8 MiB (5.4%)
4: cpu: 3.5% command: librewolf pid: 10488 mem: 63.8 MiB (1.0%)
5: cpu: 2.8% command: librewolf pid: 10359 mem: 228.9 MiB (3.8%)
Memory top: 5 of 243
1: mem: 498.3 MiB (8.4%) command: librewolf pid: 10080 cpu: 11.1%
2: mem: 320.8 MiB (5.4%) command: librewolf pid: 10236 cpu: 3.7%
3: mem: 228.9 MiB (3.8%) command: librewolf pid: 10359 cpu: 2.8%
4: mem: 220.9 MiB (3.7%) command: librewolf pid: 10302 cpu: 1.5%
5: mem: 167.1 MiB (2.8%) command: Xorg pid: 1279 cpu: 2.7%
Info:
Processes: 243 Power: uptime: 1h 38m states: freeze,mem,disk suspend: s2idle
wakeups: 1 hibernate: platform avail: shutdown, reboot, suspend, test_resume
image: 2.28 GiB services: upowerd,xfce4-power-manager Init: systemd v: 256
default: graphical tool: systemctl
Compilers: clang: 18.1.8 gcc: 14.2.1 Shell: Bash v: 5.2.32
running-in: xfce4-terminal inxi: 3.3.35 ´´´journalctl returns:
░░ Subject: Invalid service file
░░ Defined-By: dbus-broker
░░ Support: https://groups.google.com/forum/#!forum/bus1-devel
░░
░░ A service file is a ini-type configuration file.
░░
░░ It has one required section
░░ named [D-BUS Service]. The section contains the required key 'Name', which
░░ must be a valid D-Bus name that is unique across all service files. It also
░░ contains at least one of the two optional keys 'SystemdService' and 'Exec',
░░ as well as optionally the key 'User'. Exec must be a valid shell command and
░░ User must be a valid user on the system.
░░
░░ A service file should be named after the D-Bus name it configures. That is
░░ a file containing Name=org.foo.bar1 should be named org.foo.bar1.service.
░░ For backwards compatibility, we only warn when files do not follow this
░░ convention when run as a user bus. The system bus considers this an error
░░ and ignores the service file.
sep 05 08:41:46 Manjaro ddcutil[1940]: busno=5, sleep-multiplier = 2.00. Testing for supported feature 0x10 returned Error_Info[DDCRC_RETRIES in ddc_write_read_with_retry, causes: EREMOTEIO(10)]
sep 05 08:41:48 Manjaro ddcutil[2022]: busno=5, sleep-multiplier = 2.00. Testing for supported feature 0x10 returned Error_Info[DDCRC_RETRIES in ddc_write_read_with_retry, causes: EREMOTEIO(10)]
sep 05 08:41:49 Manjaro ddcutil[2029]: busno=5, sleep-multiplier = 2.00. Testing for supported feature 0x10 returned Error_Info[DDCRC_RETRIES in ddc_write_read_with_retry, causes: EREMOTEIO(10)]
sep 05 08:41:51 Manjaro ddcutil[2037]: busno=5, sleep-multiplier = 2.00. Testing for supported feature 0x10 returned Error_Info[DDCRC_RETRIES in ddc_write_read_with_retry, causes: EREMOTEIO(10)]…
Please take some time to familiarise yourself with Forum requirements; in particular, the many ways to use the forum to your benefit: including the formatting of posts.
Place that wall of text in the previous post within ``` backtick characters as described in the link below, thanks.
Once that is done, others will more easily be able to read it.
Chaotic Aur is by the way most definitely unsupported. Just saying, might not have anything with your issue, but adds an unknown variable.
So should I reinstall all my chaotic aur packages to another repository and slide off AUR support on preferences??
Consider updating your BIOS; it seems rather old. An updated BIOS will fix security concerns, add new features, and may solve many issues with your machine.
Neither the AUR or Chaotic AUR is officially supported by Manjaro (or Arch). Your system is then in an unsupported state; no support can be offered; there are too many possible unknowns.
Simply turning it off now will not achieve anything, as any complication as a result of installing from unsupported sources, already exists.
That said, another member may offer a suggestion or two, but it’s also possible a Moderator might just close the thread.
All I can do is wish you luck. Cheers.
I’ll update the bios, I actually downgraded it years ago because of some overclocking capabilities, I think. But I don’t overclock anymore, so I’ll update.
1 Like
Thank you, I think I underestimated the effects of how old the BIOS was. Now it suspends like it used to. Good day.
1 Like
This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.