Stuck at /dev/sda2/clear so after logging in with ctrl+alt+f2 and sudo startx showed no screen found

[RITO]

I do know know exactly for what this is happening but last time I was trying to create a virtual monitor with vdl-monitor which I think uses xrendr.
after reboot what happend is written in titel
please help

$ sudo inxi --admin --verbosity=7 --filter --no-host --width                                     ✔ 
System:
  Kernel: 6.1.30-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
    misobasedir=manjaro misolabel=MANJARO_KDE_2213 quiet systemd.show_status=1
    splash driver=free nouveau.modeset=1 i915.modeset=1 radeon.modeset=1
  Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 wm: kwin_x11 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Gigabyte model: F2A55M-DS2 v: x.x serial: N/A
    UEFI: American Megatrends v: FD date: 01/09/2014
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: available: 6.97 GiB used: 1.95 GiB (28.0%)
  Array-1: capacity: 16 GiB note: est. slots: 4 EC: None
    max-module-size: 4 GiB note: est.
  Device-1: Node0_Dimm0 type: no module installed
  Device-2: Node0_Dimm1 type: DDR3 detail: synchronous unbuffered
    (unregistered) size: 4 GiB speed: 1333 MT/s volts: N/A width (bits):
    data: 64 total: 64 manufacturer: Corsair part-no: CMZ4GX3M1A160 serial: N/A
  Device-3: Node0_Dimm2 type: no module installed
  Device-4: Node0_Dimm3 type: DDR3 detail: synchronous unbuffered
    (unregistered) size: 4 GiB speed: 1333 MT/s volts: N/A width (bits):
    data: 64 total: 64 manufacturer: Corsair part-no: CMZ4GX3M1A160 serial: N/A
CPU:
  Info: model: AMD A8-6600K APU with Radeon HD Graphics socket: FM2 (P0)
    note: check bits: 64 type: MT MCP arch: Piledriver level: v2 built: 2012-13
    process: GF 32nm family: 0x15 (21) model-id: 0x13 (19) stepping: 1
    microcode: 0x6001119
  Topology: cpus: 1x cores: 4 smt: enabled cache: L1: 192 KiB
    desc: d-4x16 KiB; i-2x64 KiB L2: 4 MiB desc: 2x2 MiB
  Speed (MHz): avg: 1900 min/max: 1900/3900 boost: enabled
    base/boost: 3900/3900 scaling: driver: acpi-cpufreq governor: schedutil
    volts: 1.3 V ext-clock: 100 MHz cores: 1: 1900 2: 1900 3: 1900 4: 1900
    bogomips: 31157
  Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 clflush cmov
    cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists
    extapic extd_apicid f16c flushbyasid fma fma4 fpu fxsr fxsr_opt ht
    hw_pstate ibs lahf_lm lbrv lm lwp mca mce misalignsse mmx mmxext monitor
    msr mtrr nonstop_tsc nopl npt nrip_save nx osvw pae pat pausefilter
    pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni popcnt pse
    pse36 rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3
    svm svm_lock syscall tbm tce topoext tsc tsc_scale vmcb_clean vme vmmcall
    wdt xop xsave
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Richland [Radeon HD 8570D] driver: radeon v: kernel
    alternate: amdgpu arch: TeraScale-3 code: Northern Islands process: TSMC 32nm
    built: 2010-13 ports: active: VGA-1 empty: DVI-D-1,HDMI-A-1 bus-ID: 00:01.0
    chip-ID: 1002:990e class-ID: 0300
  Device-2: Logitech Webcam C170 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-4:5 chip-ID: 046d:082b
    class-ID: 0102
  Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
    compositor: kwin_x11 driver: X: loaded: radeon unloaded: modesetting
    alternate: fbdev,vesa dri: r600 gpu: radeon display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: VGA-1 mapped: VGA-0 model: LG (GoldStar) FULL HD
    serial: <filter> built: 2020 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
    size: 480x270mm (18.9x10.63") diag: 551mm (21.7") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: OpenGL v: 4.5 Mesa 23.0.3 renderer: AMD ARUBA (DRM 2.50.0 /
    6.1.30-1-MANJARO LLVM 15.0.7) direct-render: Yes
Audio:
  Device-1: AMD Trinity HDMI Audio driver: snd_hda_intel v: kernel
    bus-ID: 00:01.1 chip-ID: 1002:9902 class-ID: 0403
  Device-2: AMD FCH Azalia vendor: Gigabyte driver: snd_hda_intel v: kernel
    bus-ID: 00:14.2 chip-ID: 1022:780d class-ID: 0403
  Device-3: Logitech Webcam C170 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-4:5 chip-ID: 046d:082b
    class-ID: 0102
  API: ALSA v: k6.1.30-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 0.3.70 status: n/a (root, process) with: wireplumber
    status: active tools: pw-cli,wpctl
  Server-3: PulseAudio v: 16.1 status: active (root, process)
    with: pulseaudio-alsa type: plugin tools: pacat,pactl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: e000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp1s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 946.53 GiB used: 0 KiB (0.0%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM003-1ER162
    family: Barracuda 7200.14 (AF) size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B sata: 3.1 speed: 3.0 Gb/s tech: HDD rpm: 7200
    serial: <filter> fw-rev: CC43 temp: 36 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 2y 305d 7h cycles: 6849
    read: 1.25 PiB written: 76.6 TiB Pre-Fail: reallocated sector: 99
    threshold: 10 attribute: Spin_Retry_Count value: 100 worst: 100
    threshold: 97
  ID-2: /dev/sdb maj-min: 8:16 vendor: HP model: v220w size: 15.02 GiB
    block-size: physical: 512 B logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s
    lanes: 1 mode: 2.0 speed: <unknown> tech: N/A serial: <filter> fw-rev: 1100
    scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH24NSB0 rev: LM01
    dev-links: cdrom
  Features: speed: 12 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
  Message: No partition data found.
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/dm-0 maj-min: 254:0 mapped: ventoy size: 3.59 GiB fs: iso9660
  ID-2: /dev/sda1 maj-min: 8:1 size: 300 MiB fs: vfat label: NO_LABEL
    uuid: 9E58-98B8
  ID-3: /dev/sda2 maj-min: 8:2 size: 931.22 GiB fs: ext4 label: N/A
    uuid: e7612f8f-268d-41db-a436-8289b3ca7f84
  ID-4: /dev/sdb1 maj-min: 8:17 size: 14.98 GiB fs: exfat label: Ventoy
    uuid: BF28-28A2
  ID-5: /dev/sdb2 maj-min: 8:18 size: 32 MiB fs: vfat label: VTOYEFI
    uuid: 83A6-E98E
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 5 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-3:2 info: HP v220w type: mass storage driver: usb-storage
    interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 300mA chip-ID: 03f0:5a07 class-ID: 0806 serial: <filter>
  Hub-2: 2-0:1 info: full speed or root hub ports: 5 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 2-4:5 info: Logitech Webcam C170 type: video,audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 046d:082b class-ID: 0102
  Hub-3: 3-0:1 info: full speed or root hub ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 4-0:1 info: full speed or root hub ports: 5 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
    class-ID: 0900
  Hub-5: 5-0:1 info: full speed or root hub ports: 5 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
    class-ID: 0900
  Device-1: 5-1:2 info: Logitech Unifying Receiver type: keyboard,mouse
    driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
    chip-ID: 046d:c534 class-ID: 0301
  Device-2: 5-2:3 info: Dell MS116 Optical Mouse type: mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s)
    lanes: 1 mode: 1.0 power: 100mA chip-ID: 413c:301a class-ID: 0301
  Device-3: 5-3:4 info: SINO WEALTH Gaming KB type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 258a:002a class-ID: 0300
  Hub-6: 6-0:1 info: full speed or root hub ports: 2 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
    class-ID: 0900
  Hub-7: 7-0:1 info: full speed or root hub ports: 4 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 25.0 C mobo: N/A gpu: radeon temp: 9.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 196 Uptime: 3m wakeups: 0 Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
  pkgs: 1211 libs: 330 tools: pamac pm: flatpak pkgs: 0 Shell: Zsh (sudo)
  v: 5.9 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.27

sudo startx output

and after opening the log

[andreas85]

Welcome to Manjaro!

1. Please read the information behind this link. It will help you to post necessary information.

[HowTo] Request support

Difficulty: ★☆☆☆☆ Strong of its many members, the Manjaro support forum can provide you help whenever you have an issue with your Manjaro installation. But in order to work efficiently, we shall also ask you to follow three major points. Provide context Simply signaling an issue is rarely enough to understand how it occurred. It is thus important to provide details on how it happened: Detail prior actions leading to the issue. List solutions and guides you already tried, with links when…

2. Please press the three dots … below your post and then press the

• If you give us information about your system, we can see what we’re talking about and make better suggestions.
• You can do this by using inxi in a terminal or in console.

sudo inxi --admin --verbosity=7 --filter --no-host --width

• Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
• Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.

3. Copy the output from inxi (including the command) and paste it into your post.

• To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

[HowTo] Post command output and file content as formatted text

Difficulty: ★☆☆☆☆ Formatting differences Discourse – this forum’s engine – uses Markdown to format its posts, and removes “unnecessary” whitespace. Terminal commands often produce output formatted so that they are better readable by the user, taking advantage of the monospaced font used. Programming code often rely on indentation to make it more readable. Using preformatting in Markdown Markdown includes a pattern to provide preformatting when necessary. You only need to put the part to f…

Have you already for your problem in the forum ? (Wisdom lies in asking → listening → reading )

[RITO]

thanks for mentioning about more information I totally forgot about it.
I updated it.

[RITO]

@andreas85

Have you already for your problem in the forum ? (Wisdom lies in asking → listening → reading )

I have been roaming around forams all day haven’t got any solutions

[MrLavender]

Undo whatever that script did, which seems to be just adding /usr/share/X11/xorg.conf.d/20-intel.conf.

So sudo rm /usr/share/X11/xorg.conf.d/20-intel.conf and reboot.

[RITO]

Thank you so much you saved me I was so scared you are a Hero . I can’t thank you enough I got so much tired going through so may forams.
It’s people like you that makes me feel how much more I have to learn.