I haven’t updated one device yet but I am very unsure what to make of that last post, as in: Is my manual intervention required for the Nvidia driver or mkinitcpio?
As I understand, the issue only concerns kernel 6.7 ?
Correct.
Thebissue concerns ALL kernels as mkinitcpio checks and modifies all kernels. And if a user decided to have modules uncompressed it failed a s not the initramfs was uncompressed as it should but changes were made tonthe host or rootfs in that case. That isnthe beauty of symlinks.
So if mkinitcpio 37.2-1 got installed and you fall into the criteria you should check your system and fix as needed.
Latest packages should have fixed that problem. There is also a dedicated thread for it.
1 Like
So I got lucky, upgrading (from 2023-01-02 update) directly to mkinitcpio 37.2-1.6
After the update and the switch to dbus-broker I was not able to get to a KDE desktop session. I still saw the sddm login screen, but after entering my password the screen went black (sometime - I had multiple attempts and reboots) I saw the mouse cursor on the black screen. I even could not switch to another tty, everything was just black and nothing happened.
With CTRL+C I was able to get back to the sddm login screen, but that was it.
With the help of a live USB stick, I was able to see the following error messages in the journal:
Jan 22 22:25:00 3950x systemd[1]: Starting D-Bus System Message Bus...
Jan 22 22:25:00 3950x systemd[1]: Started Snap Daemon.
Jan 22 22:25:00 3950x systemd[1]: Started D-Bus System Message Bus.
Jan 22 22:25:00 3950x dbus-broker-launch[1935]: ERROR launcher_run_child @ ../dbus-broker-35/src/launch/launcher.c +326: Permission denied
Jan 22 22:25:00 3950x dbus-broker-launch[1930]: ERROR service_add @ ../dbus-broker-35/src/launch/service.c +1011: Transport endpoint is not connected
Jan 22 22:25:00 3950x dbus-broker-launch[1930]: launcher_add_services @ ../dbus-broker-35/src/launch/launcher.c +805
Jan 22 22:25:00 3950x dbus-broker-launch[1930]: launcher_run @ ../dbus-broker-35/src/launch/launcher.c +1416
Jan 22 22:25:00 3950x dbus-broker-launch[1930]: run @ ../dbus-broker-35/src/launch/main.c +152
Jan 22 22:25:00 3950x dbus-broker-launch[1930]: main @ ../dbus-broker-35/src/launch/main.c +178
Jan 22 22:25:00 3950x dbus-broker-launch[1930]: Exiting due to fatal error: -107
Jan 22 22:25:00 3950x systemd[1]: dbus-broker.service: Main process exited, code=exited, status=1/FAILURE
Jan 22 22:25:00 3950x systemd[1]: dbus-broker.service: Failed with result 'exit-code'.
Jan 22 22:25:00 3950x systemd[1]: Starting D-Bus System Message Bus...
Jan 22 22:25:00 3950x dbus-broker-launch[1996]: ERROR launcher_run_child @ ../dbus-broker-35/src/launch/launcher.c +326: Permission denied
Jan 22 22:25:00 3950x dbus-broker-launch[1987]: ERROR service_add @ ../dbus-broker-35/src/launch/service.c +1011: Transport endpoint is not connected
Jan 22 22:25:00 3950x dbus-broker-launch[1987]: launcher_add_services @ ../dbus-broker-35/src/launch/launcher.c +805
Jan 22 22:25:00 3950x dbus-broker-launch[1987]: launcher_run @ ../dbus-broker-35/src/launch/launcher.c +1416
Jan 22 22:25:00 3950x dbus-broker-launch[1987]: run @ ../dbus-broker-35/src/launch/main.c +152
Jan 22 22:25:00 3950x systemd[1]: Started D-Bus System Message Bus.
Jan 22 22:25:00 3950x dbus-broker-launch[1987]: main @ ../dbus-broker-35/src/launch/main.c +178
Jan 22 22:25:00 3950x dbus-broker-launch[1987]: Exiting due to fatal error: -107
Jan 22 22:25:00 3950x systemd[1]: dbus-broker.service: Main process exited, code=exited, status=1/FAILURE
Jan 22 22:25:00 3950x systemd[1]: dbus-broker.service: Failed with result 'exit-code'.
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Waiting for firmware download to complete
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Firmware loaded in 1320604 usecs
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Waiting for device to boot
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Malformed MSFT vendor event: 0x02
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Device booted in 14609 usecs
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: Firmware revision 0.3 build 249 week 27 2023
Jan 22 22:25:00 3950x kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
Jan 22 22:25:00 3950x systemd[1]: dbus-broker.service: Start request repeated too quickly.
Jan 22 22:25:00 3950x systemd[1]: dbus-broker.service: Failed with result 'exit-code'.
Jan 22 22:25:01 3950x systemd[1]: Failed to start D-Bus System Message Bus.
Jan 22 22:25:01 3950x systemd[1]: Dependency failed for Network Manager.
Jan 22 22:25:01 3950x systemd[1]: NetworkManager.service: Job NetworkManager.service/start failed with result 'dependency'.
Jan 22 22:25:01 3950x systemd[1]: dbus.socket: Failed with result 'service-start-limit-hit'.
Jan 22 22:25:01 3950x avahi-daemon[1805]: dbus_bus_get_private(): Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was >
Jan 22 22:25:01 3950x avahi-daemon[1805]: WARNING: Failed to contact D-Bus daemon.
Jan 22 22:25:01 3950x avahi-daemon[1805]: avahi-daemon 0.8 exiting.
Jan 22 22:25:01 3950x systemd[1]: avahi-daemon.service: Main process exited, code=exited, status=255/EXCEPTION
Jan 22 22:25:01 3950x systemd[1]: avahi-daemon.service: Failed with result 'exit-code'.
Jan 22 22:25:01 3950x kernel: fbcon: Taking over console
Jan 22 22:25:01 3950x kernel: [drm] DSC precompute is not needed.
Jan 22 22:25:01 3950x polkitd[1809]: Loading rules from directory /etc/polkit-1/rules.d
Jan 22 22:25:01 3950x polkitd[1809]: Loading rules from directory /usr/share/polkit-1/rules.d
Jan 22 22:25:01 3950x polkitd[1809]: Finished loading, compiling and executing 10 rules
Jan 22 22:25:01 3950x polkitd[1809]: Lost the name org.freedesktop.PolicyKit1 - exiting
Jan 22 22:25:01 3950x systemd[1]: Failed to start Avahi mDNS/DNS-SD Stack.
Jan 22 22:25:01 3950x kernel: Console: switching to colour frame buffer device 160x45
Jan 22 22:25:01 3950x systemd[1]: polkit.service: Main process exited, code=exited, status=1/FAILURE
Jan 22 22:25:01 3950x systemd[1]: polkit.service: Failed with result 'exit-code'.
Jan 22 22:25:01 3950x systemd[1]: Failed to start Authorization Manager.
Jan 22 22:25:01 3950x systemd[1]: Dependency failed for Modem Manager.
Jan 22 22:25:01 3950x systemd[1]: ModemManager.service: Job ModemManager.service/start failed with result 'dependency'.
Jan 22 22:25:01 3950x systemd[1]: Starting firewalld - dynamic firewall daemon...
Jan 22 22:25:01 3950x systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
Jan 22 22:25:01 3950x systemd[1]: Stopped Virtual Console Setup.
Jan 22 22:25:01 3950x systemd[1]: Stopping Virtual Console Setup...
Jan 22 22:25:01 3950x systemd[1]: Starting Virtual Console Setup...
Jan 22 22:25:01 3950x systemd[1]: Finished Virtual Console Setup.
Jan 22 22:25:01 3950x firewalld[2028]: ERROR: Exception DBusException: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /run/dbus/system_bus_socket: Connection refused
Jan 22 22:25:01 3950x systemd[1]: firewalld.service: Deactivated successfully.
At first I thought the message dbus-broker-launch[1996]: ERROR launcher_run_child @ ../dbus-broker-35/src/launch/launcher.c +326: Permission denied was caused by apparmor, but disabling apparmor did not make a difference.
In the end I was only able to solve this situation for me by re-installing dbus-daemon again.
inxi -v7azy
System:
Kernel: 6.6.10-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
root=UUID=dcfdf4e1-932e-49e9-b929-a282d2e8268f ro quiet amd_iommu=on
resume=UUID=192f1205-0ab9-469b-a15f-dee3463a7525 udev.log_priority=3
Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.12 wm: kwin_wayland dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: Gigabyte product: X570 AORUS MASTER v: -CF serial: N/A
Mobo: Gigabyte model: X570 AORUS MASTER serial: N/A UEFI: American
Megatrends LLC. v: F37c date: 03/23/2023
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 64 GiB available: 62.72 GiB used: 6.9 GiB (11.0%)
Array-1: capacity: 128 GiB slots: 4 modules: 2 EC: None
max-module-size: 32 GiB note: est.
Device-1: DIMM 0 type: no module installed
Device-2: DIMM 1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 32 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2 max: 1.2
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMK64GX4M2E3200C16 serial: N/A
Device-3: DIMM 0 type: no module installed
Device-4: DIMM 1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 32 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2 max: 1.2
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMK64GX4M2E3200C16 serial: N/A
CPU:
Info: model: AMD Ryzen 9 3950X socket: AM4 bits: 64 type: MT MCP arch: Zen 2
gen: 3 level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701030
Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB
L3: 64 MiB desc: 4x16 MiB
Speed (MHz): avg: 2362 high: 3500 min/max: 2200/4761 boost: enabled
base/boost: 3500/4725 scaling: driver: acpi-cpufreq governor: schedutil
volts: 1.1 V ext-clock: 100 MHz cores: 1: 3500 2: 2200 3: 2200 4: 2200
5: 2200 6: 2200 7: 2200 8: 2200 9: 2200 10: 2200 11: 2200 12: 2200 13: 2200
14: 2200 15: 2200 16: 2200 17: 2200 18: 2200 19: 2200 20: 2200 21: 2200
22: 2200 23: 2200 24: 3500 25: 3500 26: 2200 27: 2200 28: 2200 29: 2200
30: 2200 31: 2200 32: 3500 bogomips: 224112
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
rdtscp rep_good sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2
sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP
protection
Type: spec_rstack_overflow mitigation: Safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 31 [Radeon RX 7900 XT/7900 XTX] vendor: Sapphire NITRO+
driver: amdgpu v: kernel arch: RDNA-3 code: Navi-3x process: TSMC n5 (5nm)
built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
active: HDMI-A-1,HDMI-A-2 empty: DP-1,DP-2 bus-ID: 0d:00.0
chip-ID: 1002:744c class-ID: 0300
Device-2: Logitech BRIO Ultra HD Webcam
driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 3.1
speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 6-2.3:4 chip-ID: 046d:085e
class-ID: 0300 serial: <filter>
Display: server: X.Org v: 23.2.3 with: Xwayland v: 23.2.3
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: :1 screens: 1
Screen-1: 0 s-res: 6400x2160 s-dpi: 96 s-size: 1693x572mm (66.65x22.52")
s-diag: 1787mm (70.36")
Monitor-1: HDMI-A-1 pos: primary,left model: Samsung U32J59x
serial: <filter> built: 2018 res: 3840x2160 hz: 60 dpi: 139 gamma: 1.2
size: 700x390mm (27.56x15.35") diag: 800mm (31.5") ratio: 16:9 modes:
max: 3840x2160 min: 720x400
Monitor-2: HDMI-A-2 pos: right model: Lenovo P24h-10 serial: <filter>
built: 2018 res: 2560x1440 hz: 60 dpi: 123 gamma: 1.2
size: 530x300mm (20.87x11.81") diag: 604mm (23.8") ratio: 16:9 modes:
max: 2560x1440 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.3.3-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 7900 XTX (radeonsi
navi31 LLVM 16.0.6 DRM 3.54 6.6.10-1-MANJARO) device-ID: 1002:744c
memory: 23.44 GiB unified: no
API: Vulkan v: 1.3.274 layers: 5 device: 0 type: discrete-gpu name: AMD
Radeon RX 7900 XTX (RADV NAVI31) driver: mesa radv v: 23.3.3-manjaro1.1
device-ID: 1002:744c surfaces: xcb,xlib
Audio:
Device-1: AMD Navi 31 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0d:00.1 chip-ID: 1002:ab30
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0f:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Elgato Systems GmbH Wave:3 driver: snd-usb-audio type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 5-2.1:4 chip-ID: 0fd9:0070
class-ID: fe01 serial: <filter>
Device-4: Astro Gaming MixAmp Pro driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-4.2:6
chip-ID: 9886:0018 class-ID: 0300
Device-5: Logitech BRIO Ultra HD Webcam
driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 3.1
speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 6-2.3:4 chip-ID: 046d:085e
class-ID: 0300 serial: <filter>
API: ALSA v: k6.6.10-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 1.0.0 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: pipewire-media-session status: active
3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp5s0 state: down mac: <filter>
Device-2: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 06:00.0
chip-ID: 8086:1539 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-3: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: d000 bus-ID: 07:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-2: vlan1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-3: vlan10 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-4: vlan11 state: up speed: 1000 Mbps duplex: full mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-5:4 chip-ID: 8087:0029
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: disabled
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 7.57 TiB used: 2.02 TiB (26.7%)
ID-1: /dev/nvme0n1 maj-min: 259:1 vendor: Corsair model: Force MP600
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: EGFM11.1 temp: 42.9 C
scheme: GPT
SMART: yes health: PASSED on: 307d 20h cycles: 1,051
read-units: 33,724,696 [17.2 TB] written-units: 47,858,594 [24.5 TB]
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: SanDisk
model: THNSN5256GPU7 TOSHIBA size: 238.47 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 57MS4109 temp: 62.9 C scheme: GPT
SMART: yes health: PASSED on: 1y 54d 8h cycles: 2,195
read-units: 61,489,378 [31.4 TB] written-units: 38,291,310 [19.6 TB]
ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD60EFRX-68MYMN1
family: Red size: 5.46 TiB block-size: physical: 4096 B logical: 512 B
sata: 3.1 speed: 6.0 Gb/s tech: HDD rpm: 5700 serial: <filter> fw-rev: 0A82
temp: 30 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 241d 7h cycles: 2644
ID-4: /dev/sdb maj-min: 8:16 vendor: SanDisk model: Extreme
drive model: SSD U100 64GB family: based SSDs size: 59.63 GiB block-size:
physical: 512 B logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1
mode: 2.0 sata: 3.0 speed: 6.0 Gb/s tech: SSD serial: <filter>
drive serial: <filter> fw-rev: 0001 drive-rev: KM.10.00 scheme: MBR
SMART: yes state: enabled health: PASSED on: 15 hrs cycles: 436
read: 483.99 GiB written: 623.56 GiB
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 185.55 GiB size: 181.58 GiB (97.86%)
used: 105.1 GiB (57.9%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p4
maj-min: 259:5 label: N/A uuid: dcfdf4e1-932e-49e9-b929-a282d2e8268f
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 292 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:3 label: N/A uuid: 04A3-5427
ID-3: /home raw-size: 1.63 TiB size: 1.6 TiB (98.37%)
used: 923.12 GiB (56.2%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p5
maj-min: 259:6 label: N/A uuid: 5ce58a47-332b-4c10-a281-15f162944b35
ID-4: /home/<filter>/Media raw-size: 5.46 TiB size: 5.41 TiB (99.19%)
used: 1.02 TiB (18.8%) fs: ext4 block-size: 4096 B dev: /dev/sda1
maj-min: 8:1 label: Data uuid: 6134b7db-69f1-47c6-ba42-80b7ed74a768
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:4 label: N/A
uuid: 192f1205-0ab9-469b-a15f-dee3463a7525
Unmounted:
ID-1: /dev/sdb1 maj-min: 8:17 size: 3.88 GiB fs: iso9660
ID-2: /dev/sdb2 maj-min: 8:18 size: 4 MiB fs: vfat label: MISO_EFI
uuid: B25B-A794
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-1:2 info: Integrated Express IT8297 RGB LED Controller
type: keyboard driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 048d:8297 class-ID: 0301
Hub-2: 1-6:3 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-6.2:4 info: SanDisk SDCZ80 Flash Drive type: mass storage
driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 200mA chip-ID: 0781:5580 class-ID: 0806
serial: <filter>
Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-5:4 info: Intel AX200 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0029 class-ID: e001
Hub-5: 3-6:3 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Hub-6: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-7: 5-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-8: 5-2:2 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2109:2817
class-ID: 0900
Device-1: 5-2.1:4 info: Elgato Systems GmbH Wave:3 type: audio
driver: snd-usb-audio interfaces: 5 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 0fd9:0070 class-ID: fe01
serial: <filter>
Device-2: 5-2.2:5 info: Logitech G910 Orion Spectrum Mechanical Keyboard
type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA
chip-ID: 046d:c335 class-ID: 0300 serial: <filter>
Device-3: 5-2.4:7 info: Logitech G502 SE HERO Gaming Mouse type: mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c08b class-ID: 0300
serial: <filter>
Hub-9: 5-4:3 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2109:2817
class-ID: 0900
Device-1: 5-4.2:6 info: Astro Gaming MixAmp Pro type: audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 7 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 9886:0018 class-ID: 0300
Device-2: 5-4.4:8 info: Realtek Smart Card Reader Interface
type: smart card driver: usbfs interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 0bda:0165 class-ID: 0b00 serial: <filter>
Hub-10: 6-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-11: 6-2:2 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.2
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2109:0817
class-ID: 0900
Device-1: 6-2.3:4 info: Logitech BRIO Ultra HD Webcam type: video,audio,HID
driver: hid-generic,snd-usb-audio,usbhid,uvcvideo interfaces: 6 rev: 3.1
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA
chip-ID: 046d:085e class-ID: 0300 serial: <filter>
Hub-12: 6-4:3 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.2
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2109:0817
class-ID: 0900
Sensors:
System Temperatures: cpu: 41.0 C mobo: 39.0 C gpu: amdgpu temp: 44.0 C
mem: 54.0 C
Fan Speeds (rpm): fan-1: 592 fan-2: 661 fan-3: 605 gpu: amdgpu fan: 0
Power: 12v: N/A 5v: N/A 3.3v: 3.38 vbat: 3.29 gpu: amdgpu watts: 16.00
Info:
Processes: 529 Uptime: 31m wakeups: 0 Init: systemd v: 255 default: graphical
tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6 Packages: 2278
pm: pacman pkgs: 2244 libs: 548 tools: pamac pm: flatpak pkgs: 21 pm: snap
pkgs: 13 Shell: Zsh (sudo) v: 5.9 running-in: konsole inxi: 3.3.31
1 Like
Thanks a lot, i had the same problem and this solution worked.
I have another problem anyway: I noticed now that OBS Studio is not working after the last update. Here’s the output:
debug: Found portal inhibitor
debug: Attempted path: share/obs/obs-studio/locale/en-US.ini
debug: Attempted path: /usr/share/obs/obs-studio/locale/en-US.ini
debug: Attempted path: share/obs/obs-studio/themes/Yami.qss
debug: Attempted path: /usr/share/obs/obs-studio/themes/Yami.qss
warning: [Safe Mode] Unclean shutdown detected!
info: [Safe Mode] User has launched in Safe Mode.
info: Using EGL/X11
info: CPU Name: AMD Ryzen 5 3400G with Radeon Vega Graphics
info: CPU Speed: 1815.736MHz
info: Physical Cores: 4, Logical Cores: 8
info: Physical Memory: 48093MB Total, 38095MB Free
info: Kernel Version: Linux 6.1.71-1-MANJARO
info: Distribution: "Manjaro Linux" Unknown
info: Desktop Environment: KDE (KDE)
info: Session Type: x11
info: Window System: X11.0, Vendor: The X.Org Foundation, Version: 1.21.1
info: Qt Version: 6.6.1 (runtime), 6.6.1 (compiled)
info: Portable mode: false
warning: Safe Mode enabled.
info: OBS 30.0.2-1 (linux)
info: ---------------------------------
info: ---------------------------------
info: audio settings reset:
samples per sec: 48000
speakers: 2
max buffering: 960 milliseconds
buffering type: dynamically increasing
info: ---------------------------------
info: Initializing OpenGL...
info: Loading up OpenGL on adapter AMD AMD Radeon Vega 11 Graphics (radeonsi, raven, LLVM 16.0.6, DRM 3.49, 6.1.71-1-MANJARO)
info: OpenGL loaded successfully, version 4.6 (Core Profile) Mesa 23.3.3-manjaro1.1, shading language 4.60
info: ---------------------------------
info: video settings reset:
base resolution: 472x356
output resolution: 472x356
downscale filter: Bilinear
fps: 30/1
format: NV12
YUV mode: Rec. 709/Partial
info: NV12 texture support not available
info: P010 texture support not available
info: Audio monitoring device:
name: Default
id: default
info: ---------------------------------
warning: Failed to load 'en-US' text for module: 'decklink-captions.so'
warning: Failed to load 'en-US' text for module: 'decklink-output-ui.so'
libDeckLinkAPI.so: cannot open shared object file: No such file or directory
warning: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
warning: Failed to initialize module 'decklink.so'
warning: Skipping module 'frontend-tools', not on safe list
info: [pipewire] Available captures:
info: [pipewire] - Desktop capture
info: [pipewire] - Window capture
info: NVENC supported
info: VAAPI: API version 1.20
Segmentation fault (core dumped)
The new FireFox update (121.0.1-1 → 122.0-1) just switched my language setting inside of FireFox to English. While this is no big deal I wonder why? I have a relatively new install of Manjaro KDE (2 Weeks old or so) and I am on the Stable Branch using the default FF package. FireFox should not switch the language after an update, how can I help you fix this problem?
Note: I have “Deutsch” configured as my only language in KDE settings and as my first language in the Manjaro-Settingsmanager, but I guess I have the English language packs installed as well(probably by default).
I don’t think this is an upsteam bug, but I cant say for sure.
Do you have firefox-i18n-de installed?
Yes and firefox-i18-en-us and I also had both installed before the update.
This update broke Steam. Launchers of multiple kinds just hang indefinitely, locking up the entire KDE Desktop.
I just did a quick test of Steam and I can launch and play all the 3 games I have installed at the moment on my Cinnamon Desktop, so it seems there’s a problem on your side.
You might want to open a new thread in the support forum, with at least your system specs (“inxi -F” in a terminal) and a copy from the output of Steam (launched from a terminal too).
Mhwd and mhwd-db got 2 updates, one was 2 days ago or so one I got today.
Just wanted to mention that both pamac cli and pacman tell you about a conflict
warning: dependency cycle detected:
warning: mhwd-db will be installed before its mhwd dependency
warning: dependency cycle detected:
warning: mhwd-db will be installed before its mhwd dependency
warning: dependency cycle detected:
warning: mhwd-db will be installed before its mhwd dependency
before installation.
(And why do I get it thrice now?)
Anyway just wanted to tell you that I “solved” it by first updading mhwd
sudo pacman -S mhwd
before running
sudo pacman -Syu
again
Unsure if this is good practice but would not know why that’d cause any issue…
Think I also ran sudo pacman -S mhwd again after it was over to reinstall.
Nope. Steam works fine for me on KDE and if it was broken there would be a lot more posts about it. It’s something specific to your system.
Read again. That’s not a conflict. And it goes through without doing anything.
1 Like
Maybe this will help look here.
TLDR: Downgrade pixman 0.43.0-1 back to 0.42.2-1, did the trick for me.
1 Like
Thanks mate, that solved it.
I’ve been spending more time on my SteamDeck lately that I found my main rig 2-3 months behind on updates; and figured today was the day.
Imagine my surprise (post update/reboot) when GRUB only gave me the option to log in as root as I was in “maintenance mode”… rebooted, paid more attention to the scrolling boot text, and found that nvme01 was not a happy camper. I thought it was odd that the system didn’t boot as nvme01 is not my boot/os drive until I remembered drives listed in /etc/fstab need to be there.
Thankfully I remembered the following commands:
lsblk -fto get a list of the UUID’s for the drives the system was using, so that I couldnano /etc/fstaband rem out (#) the drive that failed (not in the lsblk list)
Rebooted and all is well (minus a failed drive) as I’m back in the OS once more… but definitely a scary moment. I’m going to have to dig into learning the changes required for “mount on demand” on my non-system drives.
How to access directory without terminal under plasma-wayland?