seems like it will be fixed next update: Can't move selection up or down when using Sushi (#2556) · Issues · GNOME / Files · GitLab
Ah perfect, good to know it will be fixed. For now a focus shift works alright. 
Night light and Pamac update indicator is working fine for me on Gnome/nvidia driver, but yes Firefox has problems now on nvidia, see here:
Hi,
Did I bricked my installation? I was trying to do full system update but my idiot self thinks otherwise and try to update openssl and lib32-openssl first instead, it updates successfully but now I can’t do update, some app don’t open and the error I got from terminal is error while loading shared libraries: libcrypto.so.1.1: cannot open shared object file: No such file or directory, so is there a workaround to solve this issue?
In addition to this, I can’t even do sudo ln -s /usr/lib/libcrypto.so /usr/lib/libcrypto.so.1.1 to try to solve it (sudo part can’t be executed)
1 Like
No update from my side since months or years and it works apparently perfectly after this update that I have finally made! Thanks for the good work! It is impressive!
1 Like
Because it wasn’t installed yet, and now I can’t do pacman and paru to install openssl-1.1 and lib32-openssl-1.1, as I said, instead of doing full update, I update openssl and lib32-openssl separately, which is a dumb thing to do by me
EDIT:
Currently waiting for the latest ISO to be downloaded before I even shutdown the PC in hope that I can fix it through chroot
I fix the issue by… copying and pasting previous openssl and lib32-openssl version files from old Manjaro version, not the most elegant solution but hey, it works, lmao
Edit:
I haven’t managed to do proper update yet because I need to go to work, will post an update if I successfully upgrade the system with this approach or not
2 Likes
Boring.
Upgrade went smoothly, everything seems to be working properly.
1 Like
I can no longer output to my 2 external monitors at 144 Hz. The monitors are connected via docking station. When I login I run a command to extend them both to the right of my laptop display at their native resolution (2560x1440) and both at 144 Hz. This no longer works. The third display remains off and I get xrandr saying “Configure crtc x failed”.
Also this was already a problem, but when I login with the dock and monitors attached, my desktop is shifted one screen. So the wallpaper of display 1 is now on 2, and the wallpaper of display 2 is now on 3, and the wallpaper of 3 is in the void. Among other problems… But at least I could still use them before.
Now I can only use them if I set them to 60 Hz, but this is unacceptable for my uses. I’d also like to know why the monitors no longer turn on immediately when I plug the dock in (this is why I wrote the login script) - but this was a problem before the update too.
But yeah, bottom line: I can no longer use my dock-attached external displays the way I’ve been using them and I don’t know how/why. I’ve looked online relating to this crtc thing but the details are vague. And the only “helpful” resources I’ve found just tell me to lower the refresh rate, but once again they were fine operating at the high refresh rates before my updating today. I really hope I can get this resolved asap! I may try undoing the updates with timeshift to see if it was truly the updates that caused it - let me know if this is safe to do lol.
Edit: now sddm isn’t loading for me. Not sure if related but makes it very hard to debug issues now since I’m stuck in a TTY…
Edit 2: I have restored to yesterday’s files. I can log in again. Still having the same monitor issues though so I guess it wasn’t the updates. But I’m still at a loss. It was working just fine this morning… Anyone got any ideas how to “debug” this new fangled thunderbolt stuff?
Edit 3: It’s not hardware related. Everything works fine on the Manjaro live USB. I’m pretty confident it’s KDE at the point. Would love to clear the relevant settings+cache (i.e. not all of them).
1 Like
Running gnome and when tring to open file browser nothing happens.
When trying from command line I get:
Namespace Nautilus is already loaded with version 4.0
I have a feeling that we have stumbled into a similar root cause of problem,
but in my case the whole system start has been getting compromised
by whole disk LUKS encryption, initiramfs is unable to decrypt my partition at boot time,
I am guessing by lacking of libcrypt.
So I have to use my system in a downgraded state, I have fled the testing branch,
but the stable branch has been getting kill my system also since yesterday.
Similar issue occurred with me at the testing branch few days ago,
and yesterday in the stable branch again.
https://forum.manjaro.org/t/stable-update-2022-11-14-kernels-gnome-43-1-plasma-5-26-3-systemd-251-8-firefox-106-0-5-thunderbird-lxqt/126824/51?u=osiixy
new since the update
bluetoothd[1324]: profiles/audio/vcp.c:vcp_init() D-Bus experimental not enabled
bluetoothd[1324]: src/plugin.c:plugin_init() Failed to init vcp plugin
bluetoothd[1324]: profiles/audio/mcp.c:mcp_init() D-Bus experimental not enabled
bluetoothd[1324]: src/plugin.c:plugin_init() Failed to init mcp plugin
bluetoothd[1324]: profiles/audio/bap.c:bap_init() D-Bus experimental not enabled
bluetoothd[1324]: src/plugin.c:plugin_init() Failed to init bap plugin
3 Likes
Thank you for the update, this update pretty much ran smooth except that Hotspot no longer works. The Hotspot is when you click on the Network icon there is the option to click on Hotspot and turns your system into a wireless hotspot. The hotspot still goes on but does not provide any internet to the connected devices. This has worked flawless until my update yesterday. Anything I can try?
The inxi -Fazy output
System:
Kernel: 6.0.8-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.0-x86_64
root=UUID=61563fba-524b-4fad-8d9e-d8b4c4bfde08 ro quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma v: 5.26.3 tk: Qt v: 5.15.7 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Dell product: XPS 17 9700 v: N/A serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: Dell model: 03CPGC v: A00 serial: <filter> UEFI: Dell v: 1.19.0
date: 08/09/2022
Battery:
ID-1: BAT0 charge: 67.6 Wh (100.0%) condition: 67.6/95.1 Wh (71.1%)
volts: 12.6 min: 11.4 model: BYD DELL F8CPG0B type: Li-poly serial: <filter>
status: full
Device-1: hid-CC2718400M9GTFQAU-battery model: Apple Inc. Magic Trackpad 2
serial: N/A charge: N/A status: discharging
CPU:
Info: model: Intel Core i9-10885H bits: 64 type: MT MCP arch: Comet Lake
gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
model-id: 0xA5 (165) stepping: 2 microcode: 0xF4
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB L3: 16 MiB
desc: 1x16 MiB
Speed (MHz): avg: 1400 high: 2400 min/max: 800/5300 base/boost: 2673/2400
scaling: driver: intel_pstate governor: powersave volts: 0.8 V
ext-clock: 100 MHz cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 2400 7: 800
8: 2400 9: 800 10: 800 11: 2400 12: 800 13: 800 14: 2400 15: 2400 16: 2400
bogomips: 76816
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: Enhanced IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
filling, PBRSB-eIBRS: SW sequence
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CometLake-H GT2 [UHD Graphics] vendor: Dell driver: i915
v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports:
active: DP-6,eDP-1 empty: DP-1, DP-2, DP-3, DP-4, DP-5 bus-ID: 00:02.0
chip-ID: 8086:9bc4 class-ID: 0300
Device-2: NVIDIA TU106M [GeForce RTX 2060 Max-Q] vendor: Dell
driver: nvidia v: 520.56.06 alternate: nouveau,nvidia_drm non-free: 520.xx+
status: current (as of 2022-10) arch: Turing code: TUxxx process: TSMC 12nm
built: 2018-22 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: lanes: 16
bus-ID: 01:00.0 chip-ID: 10de:1f12 class-ID: 0300
Device-3: Realtek Integrated_Webcam_HD type: USB driver: uvcvideo
bus-ID: 1-5:3 chip-ID: 0bda:5510 class-ID: fe01 serial: <filter>
Device-4: Chicony USB2.0 FHD UVC WebCam type: USB driver: uvcvideo
bus-ID: 9-2.1.4:8 chip-ID: 04f2:b612 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.4 compositor: kwin_x11 driver: X:
loaded: modesetting,nvidia alternate: fbdev,nouveau,nv,vesa dri: iris
gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 7680x1440 s-dpi: 96 s-size: 2032x381mm (80.00x15.00")
s-diag: 2067mm (81.39")
Monitor-1: DP-6 mapped: DP-2-3 pos: primary,right model: Philips PHL 499P9
serial: <filter> built: 2020 res: 5120x1440 dpi: 109 gamma: 1.2
size: 1190x340mm (46.85x13.39") diag: 1239mm (48.8") modes: max: 3840x1080
min: 720x400
Monitor-2: eDP-1 pos: left model: Sharp 0x14d6 built: 2020 res: 2560x1440
hz: 60 dpi: 178 gamma: 1.2 size: 366x229mm (14.41x9.02") diag: 432mm (17")
ratio: 16:10 modes: 3840x2400
API: OpenGL v: 4.6 Mesa 22.2.3 renderer: Mesa Intel UHD Graphics (CML GT2)
direct render: Yes
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: Dell
driver: sof-audio-pci-intel-cnl bus-ID: 9-2.1.3:5
alternate: snd_hda_intel,snd_soc_skl,snd_sof_pci_intel_cnl
chip-ID: 0bda:48a5 bus-ID: 00:1f.3 chip-ID: 8086:06c8 class-ID: 0102
serial: <filter> class-ID: 0401
Device-2: Realtek USB Audio type: USB driver: snd-usb-audio
Device-3: Realtek USB Audio type: USB driver: snd-usb-audio
bus-ID: 9-2.3.4:9 chip-ID: 0bda:402e class-ID: 0102 serial: <filter>
Sound API: ALSA v: k6.0.8-1-MANJARO running: yes
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.59 running: yes
Network:
Device-1: Qualcomm QCA6390 Wireless Network Adapter vendor: Rivet Networks
driver: ath11k_pci v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 link-max:
gen: 3 speed: 8 GT/s bus-ID: 04:00.0 chip-ID: 17cb:1101 class-ID: 0280
IF: wlp4s0 state: up mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152
bus-ID: 10-2.4:4 chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
IF: enp168s0u2u4 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-3: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152
bus-ID: 9-2.1.1.2:12 chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
IF: eth0 state: down mac: <filter>
IF-ID-1: br-0088b138c006 state: down mac: <filter>
IF-ID-2: br-15d6ef294d6d state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-3: br-1bb25fb0523f state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-4: br-4b61264ade4c state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-5: br-5056fb04a9f6 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-6: br-55b0d49c45e7 state: down mac: <filter>
IF-ID-7: br-56c2d38bd225 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-8: br-63d65da4f17f state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-9: br-93c813330327 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-10: br-9a4b39b3d3d8 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-11: br-aff4eeb0ee2d state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-12: br-bc97796e6312 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-13: br-e07c930c9b46 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-14: br-f2c41afce02e state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IF-ID-15: docker0 state: down mac: <filter>
IF-ID-16: veth079a4ff state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-17: veth153641f state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-18: veth17e59b7 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-19: veth1dcbe86 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-20: veth2df2b93 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-21: veth3740239 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-22: veth3ab4b64 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-23: veth40af4b1 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-24: veth420f68a state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-25: veth451cf8f state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-26: veth49813b6 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-27: veth6235558 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-28: veth69f573c state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-29: veth6f2b49f state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-30: veth723abd6 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-31: veth7d70ba1 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-32: veth7e4cb76 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-33: veth82ffad8 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-34: veth840da82 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-35: veth8459111 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-36: veth84a5f85 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-37: veth939c65e state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-38: veth9c52ebd state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-39: vetha1b6d54 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-40: vetha253ae1 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-41: vetha5eacb3 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-42: vethb149a88 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-43: vethb5cab05 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-44: vethb600f6c state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-45: vethbd4cfad state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-46: vethc980b01 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-47: vethce07ef6 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-48: vethd74d47c state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-49: vethd851952 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-50: vethd88e598 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-51: vethdd53f5d state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-52: vethe5c803c state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-53: vethf3d5b49 state: up speed: 10000 Mbps duplex: full
mac: <filter>
IF-ID-54: vethf64dce3 state: up speed: 10000 Mbps duplex: full
mac: <filter>
Drives:
Local Storage: total: 3.68 TiB used: 962.96 GiB (25.5%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: KIOXIA model: KXG60PNV2T04 NVMe
2048GB size: 1.86 TiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: 10704104
temp: 33.9 C scheme: GPT
SMART: yes health: PASSED on: 317d 13h cycles: 1,440
read-units: 63,657,166 [32.5 TB] written-units: 314,843,594 [161 TB]
ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Seagate model: Expansion
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: N/A
serial: <filter> rev: 0707 scheme: GPT
SMART Message: A mandatory SMART command failed. Various possible causes.
Partition:
ID-1: / raw-size: 1.43 TiB size: 1.41 TiB (98.36%) used: 962.87 GiB (66.8%)
fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p7 maj-min: 259:7
ID-2: /boot/efi raw-size: 150 MiB size: 146 MiB (97.33%)
used: 91.8 MiB (62.9%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 46.0 C pch: 52.0 C mobo: 40.0 C
Fan Speeds (RPM): cpu: 0 fan-2: 0
Info:
Processes: 565 Uptime: 4m wakeups: 9 Memory: 62.55 GiB
used: 14.12 GiB (22.6%) Init: systemd v: 251 default: graphical
tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: pm: pacman
pkgs: 1619 libs: 469 tools: pamac pm: appimage pkgs: 0 pm: flatpak pkgs: 0
Shell: Zsh (sudo) v: 5.9 default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.23
1 Like
Since this update my bluetooth headphones won’t connect anymore. This is on both linux 6.0.8 and 5.15.78.
journalctl --boot=-1 --priority=3 --catalog --no-pager
Nov 15 05:25:44 wacko kernel: x86/cpu: VMX (outside TXT) disabled by BIOS
Nov 15 05:25:44 wacko kernel: x86/cpu: SGX disabled by BIOS.
Nov 15 05:25:53 wacko bluetoothd[611]: src/plugin.c:plugin_init() Failed to init vcp plugin
Nov 15 05:25:53 wacko bluetoothd[611]: src/plugin.c:plugin_init() Failed to init mcp plugin
Nov 15 05:25:53 wacko bluetoothd[611]: src/plugin.c:plugin_init() Failed to init bap plugin
Nov 15 05:26:33 wacko bluetoothd[611]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Software caused connection abort
Nov 15 07:50:19 wacko bluetoothd[611]: src/profile.c:ext_connect() Hands-Free Voice gateway failed connect to 5E:94:85:63:3D:5B: Connection refused (111)
Nov 15 07:50:19 wacko bluetoothd[611]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 5E:94:85:63:3D:5B: Connection refused (111)
Nov 15 07:50:51 wacko bluetoothd[611]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 5E:94:85:63:3D:5B: Software caused connection abort (103)
Nov 15 07:50:51 wacko systemd-coredump[6223]: Failed to connect to coredump service: Connection refused
Nov 15 07:50:54 wacko kernel: watchdog: watchdog0: watchdog did not stop!
My system info:
inxi -v7azy
System:
Kernel: 5.15.78-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=6b21024a-d7df-4bc2-8bef-a9b0de804d23 rw quiet
udev.log_priority=3 sysrq_always_enabled=1 ipv6.disable=1
Desktop: sway v: 1.7 info: waybar vt: 2 dm: greetd Distro: Manjaro Linux
base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 81VU v: IdeaPad 1 14IGL05
serial: <superuser required> Chassis: type: 10 v: IdeaPad 1 14IGL05
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0R32802 WIN
serial: <superuser required> UEFI: LENOVO v: DWCN25WW date: 06/29/2022
Battery:
ID-1: BAT0 charge: 30.2 Wh (100.0%) condition: 30.2/32.0 Wh (94.4%)
volts: 8.5 min: 7.5 model: SMP L19M2PF1 type: Li-poly serial: <filter>
status: full cycles: 148
Memory:
RAM: total: 3.65 GiB used: 1.42 GiB (39.0%)
RAM Report: missing: Required tool dmidecode not installed. Check
--recommends
CPU:
Info: model: Intel Celeron N4020 bits: 64 type: MCP arch: Goldmont Plus
level: v2 built: 2017 process: Intel 14nm family: 6 model-id: 0x7A (122)
stepping: 8 microcode: 0x20
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 112 KiB
desc: d-2x24 KiB; i-2x32 KiB L2: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1337 high: 1721 min/max: 800/2800 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 954 2: 1721
bogomips: 4378
Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_capabilities
arch_perfmon art bts cat_l2 cdp_l2 clflush clflushopt cmov constant_tsc
cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts erms est fpu
fsgsbase fxsr ht ibpb ibrs ibrs_enhanced ida intel_pt lahf_lm lm mca mce
md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe
pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdpid rdrand
rdseed rdt_a rdtscp rep_good sdbg sep sha_ni smap smep ss ssbd sse sse2
sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tsc tsc_adjust tsc_deadline_timer
tsc_known_freq umip vme x2apic xgetbv1 xsave xsavec xsaveopt xsaves
xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 status: Vulnerable: eIBRS with unprivileged eBPF
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel GeminiLake [UHD Graphics 600] vendor: Lenovo driver: i915
v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports:
active: eDP-1 empty: HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:3185
class-ID: 0300
Device-2: Chicony EasyCamera type: USB driver: uvcvideo bus-ID: 1-5:2
chip-ID: 04f2:b5fa class-ID: 0e02 serial: <filter>
Display: wayland server: Xwayland v: 22.1.5 compositor: sway v: 1.7 driver:
gpu: i915 display-ID: 1
Monitor-1: eDP-1 model: ChiMei InnoLux 0x14e5 built: 2018 res: 1920x1080
hz: 60 dpi: 158 gamma: 1.2 scale: 1 size: 309x173mm (12.17x6.81")
diag: 354mm (13.9") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.2.3 renderer: Mesa Intel UHD Graphics 600 (GLK
2) direct render: Yes
Audio:
Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
vendor: Lenovo driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci_intel_apl bus-ID: 00:0e.0
chip-ID: 8086:3198 class-ID: 0403
Sound API: ALSA v: k5.15.78-1-MANJARO running: yes
Sound Interface: sndio v: N/A running: no
Sound Server-1: JACK v: 1.9.21 running: no
Sound Server-2: PulseAudio v: 16.1 running: no
Sound Server-3: PipeWire v: 0.3.59 running: yes
Network:
Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
vendor: Lenovo driver: ath10k_pci v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 bus-ID: 02:00.0 chip-ID: 168c:0042 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IF-ID-1: wg-mullvad state: unknown speed: N/A duplex: N/A mac: N/A
IP v4: <filter> scope: global
WAN IP: <filter>
Bluetooth:
Device-1: Qualcomm Atheros type: USB driver: btusb v: 0.8 bus-ID: 1-6:3
chip-ID: 0cf3:e500 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 3 state: up address: <filter>
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 238.33 GiB used: 36.63 GiB (15.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Lenovo
model: UMIS RPJTJ128MEE1MWX size: 119.24 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2.0C0628 temp: 27.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Generic
model: MassStorageClass size: 119.08 GiB block-size: physical: 512 B
logical: 512 B type: N/A serial: <filter> rev: 2402 scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 118.79 GiB size: 116.37 GiB (97.96%)
used: 36.63 GiB (31.5%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: 6b21024a-d7df-4bc2-8bef-a9b0de804d23
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 312 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL
uuid: CF28-36B2
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 260 MiB fs: vfat label: SYSTEM_DRV
uuid: 04F9-BD43
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 53.99 GiB fs: ntfs
label: Windows-SSD uuid: E646FB2846FAF7DF
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 1000 MiB fs: ntfs
label: WINRE_DRV uuid: 0094FBFA94FBEFD0
ID-5: /dev/nvme0n1p5 maj-min: 259:5 size: 300 MiB fs: vfat label: NO_LABEL
uuid: 0821-8BB8
ID-6: /dev/nvme0n1p6 maj-min: 259:6 size: 51.99 GiB fs: ext4
label: Internal uuid: 78e52e81-7757-4c4d-b998-ec26bb06f980
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 9 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-5:2 info: Chicony EasyCamera type: Video driver: uvcvideo
interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b5fa
class-ID: 0e02 serial: <filter>
Device-2: 1-6:3 info: Qualcomm Atheros type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0cf3:e500
class-ID: e001
Device-3: 1-8:4 info: Genesys Logic Mass Storage Device type: Mass Storage
driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 05e3:0761 class-ID: 0806 serial: <filter>
Hub-2: 2-0:1 info: Super-speed hub ports: 7 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 179 Uptime: 30m wakeups: 1 Init: systemd v: 251 default: graphical
tool: systemctl Compilers: gcc: N/A Packages: pm: pacman pkgs: 898 libs: 260
tools: pamac Shell: Zsh v: 5.9 running-in: foot inxi: 3.3.23
I also tried to update my home directory with skel, but no change.
[Solution] Installing fresh sway from the 2022-12-11 build fixed it! My guess about the problem is that it stems from wireplumber, because I had switched to it, and the installer uses pipewire-media-session. Either that or they’re just configuration wizards.
2 Likes
This info maybe helpful to fix the bug.
What do you think @openminded ?
❯ sudo pacman -F libcrypto.so.3
core/openssl 3.0.7-2 [installed: 1.1.1.q-1]
usr/lib/libcrypto.so.3
multilib/lib32-openssl 1:3.0.7-1 [installed: 1:1.1.1.q-1]
usr/lib32/libcrypto.so.3
After recent update, my quick menu looks ugly, icons are too big, and also the calendar widget looks too big. Can anyone help me figure out what’s the problem?
My screen resolution is 1920x1080
I already tried rename ~/.local/share and ~/.config and ~/.cache . Nothing helped. After reboot I think the system was reset, however, the icon/widget size are still too big. Also, checked the Display->Scale setting. It’s set to 100%
I have ‘user themes’ gome extension. It’s set to default. If I switch to gnome classic, the quick menu looks much better, but it’s light themed, regardless the dark mode is on. Maybe missing some deps?
1 Like
I’ve created some fresh ISOs with this update included. Those who want to start fresh can try those: Release 202211150747 · manjaro/release-review · GitHub Gnome users may want to downgrade to mesa 22.1.7 to get Calamares displayed properly when trying on Virtual Machines: Calamares renderes Black on Gnome 43.1 when using Administrator Mode (polkit/sudo) · Issue #2074 · calamares/calamares · GitHub
after update, paperWM focus mode not work on gnome43, someone try to downgrade to gnome42, still not work
After the update, both browsers (Firefox and Chrome) stopped being able to find my microphone. It sometimes works again after restarting the browsers. It (sometimes?) stops working after going to sleep (closing the laptop lid). I don’t know the exact cause that triggers this issue.
How to reproduce:
- Go to some website that uses the microphone (e.g. Zoom, Slack, mictests, etc.).
- Try using the microphone. It doesn’t work. The browser can’t find any microphone.
I’m using KDE/Plasma on X11 and pipewire. I’m sometimes connecting a bluetooth headphone. Still, when this bug happens, the browser fails to find even the built-in laptop microphone.
I initially thought the issue was related only to Chrome, so I opened issue 1383943. But now I see both browsers have issues.
maybe try standalone applications, instead webpages.
i have no experience with Zoom, Slack etc. but discord as sample you can use on a website or download the application. Or use mumble to get sure its a browser problem or something else.