4 posts were merged into an existing topic: Update breaks dependencies
[Stable Update] 2021-09-24 - Kernels, LibreOffice, Browsers, Pipewire, RHVoice, KDE Frameworks, Mesa
Maybe this isn’t the biggest error in the world, but when I open Discord I will get open the “canary” version (yes, i had both installed, just in case if one of the two broke and have to change it quickly to a stable version). I solved this problem removing the “canary” version.
Again, maybe not the biggest issue, but an issue after all I think. If you think this is worthless and have to remove it I don’t have any problem
After the Update brave browser stopped working and its not opening…
when i tried to start with terminal this is the op
/usr/bin/brave: line 27: 9133 Segmentation fault (core dumped) /usr/lib/brave/brave "$@" $SANDBOX_FLAG $PEPPER_FLASH_FLAG $USER_FLAGS
[Solution]Actually re-installing the brave browser fixed it
Same here.
XFCE with vertex-maia: Desktop Background gone, several icons only monochrome-colored.
Anyone has advice for a similar plain, not clunky icon theme?
Edit: for now I replaced vertex-maia with the arc icon theme
Boot/sddm problem when I went to reboot after update my hard drive with the os completely disappeared had to do a hard reset to put my mother board in safe mode “ASUS mother board”, then do a reset to recover system. FIX I reinstalled sddm, sudo pacman -S sddm and so far so good hope this helps. This only worked for a few reboots. I am trying something else that is working for now, but will wait to post it as a fix to make sure
AUR packages may need to be rebuilt after an update.
Some vertex Maia icons have been lost. Also, fonts turned to boxes during the update. After the reboot, the writing was legible again.
My Xbox One S controller worked perfectly when connected over Bluetooth. After the last update, a number of buttons and triggers have been swapped around. When I connect the controller over USB, all buttons function normally.
No clue where to start looking for a fix…
inxi details
$ inxi -Fzxc0
System: Kernel: 5.14.7-2-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 Desktop: Cinnamon 5.0.5
Distro: Manjaro Linux base: Arch Linux
Machine: Type: Desktop System: Dell product: Inspiron 660 v: N/A serial: <filter>
Mobo: Dell model: 0XR1GT v: A00 serial: <filter> UEFI: Dell v: A13 date: 05/22/2018
CPU: Info: Quad Core model: Intel Core i5-2320 bits: 64 type: MCP arch: Sandy Bridge rev: 7 cache: L2: 6 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 23962
Speed: 1892 MHz min/max: 1600/3300 MHz Core speeds (MHz): 1: 1892 2: 1614 3: 1629 4: 1615
Graphics: Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics vendor: Dell driver: i915
v: kernel bus-ID: 00:02.0
Device-2: Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: ASUSTeK driver: amdgpu v: kernel bus-ID: 01:00.0
Device-3: Logitech Webcam C200 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 3-4:3
Display: x11 server: X.Org 1.20.13 driver: loaded: amdgpu,ati,modesetting resolution: 1: 1920x1200~60Hz
2: 1440x900~60Hz
OpenGL: renderer: Radeon RX 580 Series (POLARIS10 DRM 3.42.0 5.14.7-2-MANJARO LLVM 12.0.1)
v: 4.6 Mesa 21.2.2 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 00:1b.0
Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 01:00.1
Device-3: Logitech Webcam C200 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 3-4:3
Sound Server-1: ALSA v: k5.14.7-2-MANJARO running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.37 running: yes
Network: Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Dell driver: ath9k v: kernel
port: e000 bus-ID: 03:00.0
IF: wlp3s0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Dell driver: r8169 v: kernel
port: d000 bus-ID: 04:00.0
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth: Device-1: ASUSTek Broadcom BCM20702A0 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-1.1:3
Report: bt-adapter ID: hci0 rfk-id: 1 state: up address: <filter>
Drives: Local Storage: total: 763.85 GiB used: 367.22 GiB (48.1%)
ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
ID-2: /dev/sdb vendor: Western Digital model: WD3200AAJS-56M0A0 size: 298.09 GiB
Partition: ID-1: / size: 456.95 GiB used: 301.5 GiB (66.0%) fs: ext4 dev: /dev/dm-0 mapped: cryptroot
ID-2: /boot size: 511 MiB used: 196 MiB (38.4%) fs: vfat dev: /dev/sda1
Swap: ID-1: swap-1 type: file size: 8 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: amdgpu temp: 53.0 C
Fan Speeds (RPM): cpu: 467 mobo: 1461 gpu: amdgpu fan: 1218
Info: Processes: 268 Uptime: 9m Memory: 15.5 GiB used: 2.15 GiB (13.8%) Init: systemd Compilers: gcc: 11.1.0
Packages: 1521 Shell: Bash v: 5.1.8 inxi: 3.3.06
$ lsusb
Bus 002 Device 003: ID 03f0:0024 HP, Inc KU-0316 Keyboard
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 005: ID 045e:02ea Microsoft Corp. Xbox One S Controller
Bus 001 Device 003: ID 0b05:17cb ASUSTek Computer, Inc. Broadcom BCM20702A0 Bluetooth
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:0802 Logitech, Inc. Webcam C200
Bus 003 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Many of my XFCE Vertex-Maia icons are just colored circles after this update.
Thanks! Rebuild solved the issue!