Sound comes from speakers and headphones at same time

i have some sound problem with my headphone and laptop speakers its work together i dont mute my speaker
inxi --admin --verbosity=7 --filter --no-host --width

ystem:
  Kernel: 5.10.96-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
    root=UUID=d26b2340-a9bb-4322-bac2-dd128736f56c rw log_priority=3
    pcie_aspm=force pcie_aspm.policy=performance
  Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Convertible System: LENOVO product: 81N4 v: Lenovo IdeaPad C340-14IWL
    serial: <superuser required> Chassis: type: 31 v: Lenovo IdeaPad C340-14IWL
    serial: <superuser required>
  Mobo: LENOVO model: LNVNB161216 v: SDK0J40700 WIN
    serial: <superuser required> UEFI: LENOVO v: AHCN34WW(V2.11)
    date: 06/18/2021
Battery:
  ID-1: BAT1 charge: 41.8 Wh (99.8%) condition: 41.9/45.0 Wh (93.1%)
    volts: 17.1 min: 15.4 model: 0x53 0x4D 0x50 0x00 0x32 0x30 0x PABAS0241231
    type: Li-ion serial: <filter> status: N/A cycles: 170
Memory:
  RAM: total: 7.5 GiB used: 2 GiB (26.7%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i5-8265U bits: 64 type: MT MCP
    arch: Comet/Whiskey Lake note: check family: 6 model-id: 0x8E (142)
    stepping: 0xC (12) microcode: 0xEA
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 830 high: 1603 min/max: 400/3900 scaling:
    driver: intel_pstate governor: powersave cores: 1: 600 2: 600 3: 600 4: 846
    5: 1603 6: 996 7: 700 8: 700 bogomips: 28808
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt
    cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts
    epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
    ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ibrs_enhanced ida
    intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor
    movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
    pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdseed rdtscp
    rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
    syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi
    vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
  Type: srbds mitigation: TSX disabled
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Lenovo
    driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3ea0 class-ID: 0300
  Device-2: NVIDIA GP108M [GeForce MX230] vendor: Lenovo driver: nouveau
    v: kernel bus-ID: 01:00.0 chip-ID: 10de:1d11 class-ID: 0302
  Device-3: IMC Networks Integrated Camera type: USB driver: uvcvideo
    bus-ID: 1-6:2 chip-ID: 13d3:56b2 class-ID: 0e02
  Display: x11 server: X.org 1.21.1.3 compositor: kwin_x11 driver:
    loaded: modesetting alternate: fbdev,vesa resolution: <missing: xdpyinfo>
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: Intel Cannon Point-LP High Definition Audio vendor: Lenovo
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci
    bus-ID: 00:1f.3 chip-ID: 8086:9dc8 class-ID: 0403
  Sound Server-1: ALSA v: k5.10.96-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.45 running: yes
Network:
  Device-1: Realtek RTL8822BE 802.11a/b/g/n/ac WiFi adapter
    vendor: Lenovo ThinkPad E595 driver: rtw_8822be v: N/A modules: rtw88_8822be
    port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:b822 class-ID: 0280
  IF: wlp3s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Realtek RTL8822BE Bluetooth 4.2 Adapter type: USB driver: btusb
    v: 0.8 bus-ID: 1-10:4 chip-ID: 0bda:b023 class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 238.47 GiB used: 15.43 GiB (6.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: MZVLB256HAHQ-000L2 size: 238.47 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 0L1QEXD7 temp: 37.9 C scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.98 GiB size: 28.36 GiB (97.85%) used: 15.4 GiB (54.3%)
    fs: ext4 dev: /dev/nvme0n1p7 maj-min: 259:7 label: N/A
    uuid: d26b2340-a9bb-4322-bac2-dd128736f56c
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 31.6 MiB (32.9%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
    label: N/A uuid: 8863-DC51
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 158.37 GiB fs: ntfs label: N/A
    uuid: 4A7E67E37E67C673
  ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 604 MiB fs: ntfs label: N/A
    uuid: 74601C98601C62E2
  ID-4: /dev/nvme0n1p5 maj-min: 259:5 size: 1000 MiB fs: ntfs label: N/A
    uuid: AA4AF98D4AF95713
  ID-5: /dev/nvme0n1p6 maj-min: 259:6 size: 49.44 GiB fs: btrfs label: N/A
    uuid: 23759010-15f1-4c66-b275-1d26c788432b
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-6:2 info: IMC Networks Integrated Camera type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 13d3:56b2 class-ID: 0e02
  Device-2: 1-7:3 info: Synaptics type: <vendor specific> driver: N/A
    interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 06cb:00be
    class-ID: ff00 serial: <filter>
  Device-3: 1-10:4 info: Realtek RTL8822BE Bluetooth 4.2 Adapter
    type: Bluetooth driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s
    power: 500mA chip-ID: 0bda:b023 class-ID: e001 serial: <filter>
  Hub-2: 2-0:1 info: Super-speed hub ports: 6 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 44.0 C pch: 43.0 C mobo: N/A gpu: nouveau
    temp: 42.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 250 Uptime: 11m wakeups: 78 Init: systemd v: 250 tool: systemctl
  Compilers: gcc: 11.1.0 clang: 13.0.0 Packages: pacman: 1406 lib: 376
  Shell: Zsh v: 5.8 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.12

that is a solution
https://forum.manjaro.org/t/how-do-i-identify-my-sound-card-and-verify-the-proper-driver-is-installed/65984/11?u=simtoecoten

This appears to be about the 15th time in the last month that I could copy/paste same response
    System has 2 active sound servers that are probably conflicting and causing audio issues
      Sound Server-2: PulseAudio v: 14.2 running: yes 
      Sound Server-3: PipeWire v: 0.3.25 running: yes 
    You can choose either:
        Disable the pipewire systemd socket and service to continue using PulseAudio
    systemctl --user mask --now pipewire.socket &&
    systemctl --user stop pipewire.service
    (KDE requires pipewire base package so uninstalling it is not possible for this DE)
    OR
        Install manjaro-pipewire metapackage to get the additional dependency files for Pipewire to replace PulseAudio
and all them seem to be on KDE
Absence of similar comments for other DEs would suggest that only KDE has a dependency on pipewire