Slow internet on a fresh install of Plasma Manjaro

Support Network
1

I’ve ran through solutions on multiple threads. I had linux mint loaded earlier today and was getting full speed connection ~200mb/s and when I switched to manjaro I am stuck at speeds about ~15-20mb/s.

Screenshot_20230604_222520
Screenshot_20230604_2225201342×397 85.6 KB

Screenshot_20230604_222433
made these two config files with these settings copy pasted, upgraded my kernel to from 6.1/5.4 to include 5.15, haven’t downgraded anything yet. Disabled Ipv4.

  Kernel: 6.1.31-2-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=7e11633f-76bf-4c86-a779-c7561efab0eb rw quiet splash
    udev.log_priority=3
  Desktop: KDE Plasma v: 5.27.5 tk: Qt v: 5.15.9 wm: kwin_wayland vt: 2
    dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: TUF GAMING X570-PLUS (WI-FI) v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 4403
    date: 04/27/2022
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: available: 31.25 GiB used: 2.74 GiB (8.8%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
    level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
    model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB
    desc: 1x32 MiB
  Speed (MHz): avg: 2700 high: 3800 min/max: 2200/4850 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2200 2: 2200
    3: 2200 4: 2200 5: 2868 6: 2200 7: 3800 8: 2200 9: 3590 10: 2882 11: 2200
    12: 3800 13: 2874 14: 2200 15: 2200 16: 3592 bogomips: 121416
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
    svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
    x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: Gigabyte driver: N/A
    alternate: nouveau non-free: N/A status: unknown device ID pcie: gen: 4
    speed: 16 GT/s lanes: 4 link-max: lanes: 16 bus-ID: 04:00.0
    chip-ID: 10de:2786 class-ID: 0300
  Device-2: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
    vendor: Micro-Star MSI driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
    process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16
    ports: active: DP-1,DP-2,HDMI-A-1 empty: DP-3 bus-ID: 0c:00.0
    chip-ID: 1002:73df class-ID: 0300
  Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.1
    compositor: kwin_wayland driver: X: loaded: amdgpu
    unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu d-rect: 6400x2520 display-ID: 0
  Monitor-1: DP-1 pos: top-center res: 2560x1440 size: N/A modes: N/A
  Monitor-2: DP-2 pos: bottom-r res: 1920x1080 size: N/A modes: N/A
  Monitor-3: HDMI-A-1 pos: bottom-l res: 1920x1080 size: N/A modes: N/A
  API: OpenGL v: 4.6 Mesa 23.0.3 renderer: AMD Radeon RX 6700 XT (navi22
    LLVM 15.0.7 DRM 3.49 6.1.31-2-MANJARO) direct-render: Yes
Audio:
  Device-1: NVIDIA vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 4 link-max: lanes: 16 bus-ID: 04:00.1
    chip-ID: 10de:22bc class-ID: 0403
  Device-2: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel
    pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0c:00.1 chip-ID: 1002:ab28
    class-ID: 0403
  Device-3: AMD Starship/Matisse HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0e:00.4 chip-ID: 1022:1487 class-ID: 0403
  API: ALSA v: k6.1.31-2-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 0.3.70 status: off with: wireplumber status: active
    tools: pw-cli,wpctl
  Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
    type: plugin tools: pacat,pactl
Network:
  Device-1: Intel Wireless-AC 9260 driver: iwlwifi v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2526 class-ID: 0280
  IF: wlp5s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK driver: r8169 v: kernel modules: r8168 pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 06:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp6s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Wireless-AC 9260 Bluetooth Adapter driver: btusb v: 0.8
    type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-5:2
    chip-ID: 8087:0025 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 15.46 TiB used: 9.94 GiB (0.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 2B2QEXM7 temp: 47.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST16000NM000J-2TW103
    size: 14.55 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 7200 serial: <filter> fw-rev: SN02 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.22 GiB size: 915.53 GiB (98.32%) used: 9.94 GiB (1.1%)
    fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
    uuid: 7e11633f-76bf-4c86-a779-c7561efab0eb
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
    uuid: 0ED1-65FC
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 14.55 TiB fs: ext4 label: Niall
    uuid: b9858761-45c9-412b-a766-315694ac95de
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-1:2 info: Corsair Gaming K55 RGB Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 1b1c:1b3d class-ID: 0300
    serial: <filter>
  Device-2: 1-2:3 info: Holtek USB Gaming Mouse type: keyboard,mouse,HID
    driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 350mA chip-ID: 04d9:a088 class-ID: 0300
  Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-5:2 info: Intel Wireless-AC 9260 Bluetooth Adapter
    type: bluetooth driver: btusb interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 8087:0025 class-ID: e001
  Device-2: 3-6:3 info: ASUSTek AURA LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 16mA chip-ID: 0b05:18f3 class-ID: 0300
    serial: <filter>
  Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 5-4:2 info: Logitech G29 Driving Force Racing Wheel [PS4]
    type: HID driver: hid-generic,usbhid interfaces: 1 rev: 1.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 200mA
    chip-ID: 046d:c260 class-ID: 0300
  Hub-6: 6-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 39.4 C mobo: N/A gpu: amdgpu temp: 51.0 C
    mem: 52.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 997
Info:
  Processes: 346 Uptime: 3m wakeups: 0 Init: systemd v: 253 default: graphical
  tool: systemctl Compilers: gcc: 13.1.1 clang: 15.0.7 Packages: pm: pacman
  pkgs: 1153 libs: 342 tools: pamac pm: flatpak pkgs: 0 Shell: Zsh v: 5.9
  default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.27

here is my inxi output!

2

I dont think disabling all the modern protocols is going to help you get higher speeds.

Aside from those the other options are deprecated.

But you might try intels power saving modules option:
/etc/modprobe.d/iwlmvm.conf 

options iwlmvm power_scheme=1

(you may also try other integers, like 3)

PS
Also note that you are setting 11n_disable twice … once as 1 and once as 8.
I recommend 8, which despite the variable does not disable N protocol.
(1 would disable it, 8 instead enables antenna agregation)

PPS

This is backwards from what is usually done.
Generally people disable IPv6 in order to ensure that IPv4 is used when not everything in the pipe is ipv6 capable. Mixed with your disabling of higher protocols … this is doubly confusing.
You should likely disbale this option … and even think about instead disabling ipv6.

2 Likes
3

Yes, sorry about mistyping, I did disable IPv6 not IPv4. That’s my bad it was late at night when I wrote that.
I also got rid of those configs and replaced them with the one you listed here. After a reboot, Manjaro notified me about 2 driver updates specifically for my wifi card. I updated them and now everything is running smoothly, Thank you for your time and help!

1 Like
4

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.