i’ve installed manjaro x86_64 with xfce on linux kernel 5.10 several days ago on my laptop.
i have 2 display. one is my laptop display. its 15.6inch 1920x1080@60FPS resolution, and second is extended monitor 27inch 1920x1080@60FPS. everything works fine as it should, i can setup the display to run with appropriate nvidia driver instead of prime with no issues.
Then, i once share my screen on Google Meet, and it only appears to share any window or entire screen (from monitor1 until monitor2). i also noticed the appearance in laptop is smaller than the extended one. i spend almost a day to figure out how to make the appearance in my laptop bigger, then split the screen into 2 so i can do share each screen just like in Windows. but it is no result.
can anyone help me, what should i configure?
thank you for your reply. i’m sorry i’m not clear enough.
btw, i’ve changed my distro into Arch linux with KDE, so i’m kinda scared to post into manjaro forum. but, the problem i mention earlier is still here.
here is my system:
System:
Kernel: 5.12.14-arch1-1 x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=4bbc322a-dbe8-4a11-b029-d978f9c39c81 rw loglevel=3 quiet
Desktop: KDE Plasma 5.22.2 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11 vt: 1
dm: SDDM Distro: Arch Linux
Machine:
Type: Laptop System: HP product: HP Pavilion Gaming Laptop
v: Type1ProductConfigId serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: HP model: 85FC v: 42.46 serial: <filter> UEFI: Insyde v: F.40
date: 11/04/2020
Battery:
ID-1: BAT1 charge: 45.9 Wh (100.0%) condition: 45.9/52.5 Wh (87.5%)
volts: 12.8 min: 11.6 model: Hewlett-Packard PABAS0241231 type: Li-ion
serial: <filter> status: Full
Memory:
RAM: total: 15.47 GiB used: 6.29 GiB (40.7%)
RAM Report:
missing: Required tool dmidecode not installed. Check --recommends
CPU:
Info: 6-Core model: Intel Core i7-9750H bits: 64 type: MT MCP
arch: Kaby Lake note: check family: 6 model-id: 9E (158) stepping: D (13)
microcode: DE cache: L2: 12 MiB bogomips: 62431
Speed: 800 MHz min/max: 800/4500 MHz Core speeds (MHz): 1: 800 2: 800 3: 826
4: 843 5: 838 6: 822 7: 808 8: 900 9: 891 10: 856 11: 837 12: 900
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities
arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc
cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms
est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ibrs_enhanced ida intel_pt invpcid
invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr
nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni
popcnt pse pse36 pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss
ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec
xsaveopt xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds mitigation: TSX disabled
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Hewlett-Packard
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e9b class-ID: 0300
Device-2: NVIDIA TU117M [GeForce GTX 1650 Mobile / Max-Q]
vendor: Hewlett-Packard driver: nvidia v: 465.31
alternate: nouveau,nvidia_drm bus-ID: 01:00.0 chip-ID: 10de:1f91
class-ID: 0300
Device-3: DHKQF019IBGPUM HP Wide Vision HD Camera type: USB driver: uvcvideo
bus-ID: 1-5:7 chip-ID: 04ca:707f class-ID: 0e02 serial: <filter>
Display: x11 server: X.org 1.20.11 compositor: kwin_x11 driver:
loaded: modesetting,nvidia resolution: <missing: xdpyinfo>
OpenGL: renderer: NVIDIA GeForce GTX 1650/PCIe/SSE2 v: 4.6.0 NVIDIA 465.31
direct render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
bus-ID: 01:00.1 chip-ID: 10de:10fa class-ID: 0403
Sound Server-1: ALSA v: k5.12.14-arch1-1 running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Sound Server-4: PipeWire v: 0.3.31 running: yes
Network:
Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi v: kernel
port: 5000 bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280
IF: wlo1 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 3000 bus-ID: 03:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
IF-ID-1: br-6927cdbecb00 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: link
IF-ID-2: docker0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-3: vetha744b98 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-4: vethc5a27fa state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-5: vethfd79ecd state: up speed: 10000 Mbps duplex: full mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: N/A type: USB driver: btusb v: 0.8 bus-ID: 1-14:8
chip-ID: 8087:0aaa class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: disabled
rfk-block: hardware: no software: no address: see --recommends
Logical:
Permissions: Unable to run lvs. Root privileges required.
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
v: 3.0 port: 5060 bus-ID: 00:17.0 chip-ID: 8086.282a rev: 10 class-ID: 0104
Drives:
Local Storage: total: 1.36 TiB used: 64.76 GiB (4.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WDS500G3X0C-00SJG0 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD serial: <filter>
rev: 111110WD scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM049-2GH172
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
rotation: 7200 rpm serial: <filter> rev: RXM3 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 445.22 GiB size: 436.88 GiB (98.13%)
used: 24.17 GiB (5.5%) fs: ext4 dev: /dev/nvme0n1p3 maj-min: 259:3
label: N/A uuid: 4bbc322a-dbe8-4a11-b029-d978f9c39c81
ID-2: /mnt/sda1 raw-size: 931.51 GiB size: 915.82 GiB (98.31%)
used: 40.58 GiB (4.4%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: data
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 2 GiB used: 4 MiB (0.2%) priority: -2
dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
ID-2: swap-2 type: partition size: 18 GiB used: 3.8 MiB (0.0%) priority: -3
dev: /dev/nvme0n1p4 maj-min: 259:4 label: N/A
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 550 MiB fs: <superuser required>
label: N/A uuid: 0853-9056
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-2:3 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s power: 100mA chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-2.2:5 info: SONiX USB DEVICE type: Keyboard,Mouse
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 0c45:8006 class-ID: 0301
Device-2: 1-3:6 info: SINOWEALTH Game Mouse type: Mouse,Keyboard
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
power: 256mA chip-ID: 258a:0017 class-ID: 0301
Device-3: 1-5:7 info: DHKQF019IBGPUM HP Wide Vision HD Camera type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 04ca:707f class-ID: 0e02 serial: <filter>
Device-4: 1-14:8 info: N/A type: Bluetooth driver: btusb interfaces: 2
rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0aaa class-ID: e001
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 54.0 C mobo: 29.8 C
Fan Speeds (RPM): N/A
Info:
Processes: 350 Uptime: 1h 40m wakeups: 1 Init: systemd v: 248
tool: systemctl Compilers: gcc: 11.1.0 clang: 12.0.0 Packages: 1212
pacman: 1197 lib: 304 flatpak: 10 snap: 5 Shell: Bash v: 5.1.8
running-in: konsole inxi: 3.3.04
Fabby
5 July 2021 10:19
4
Have you tried Fn +F2 according to this pic yet?
yes i already tried it. in my laptop it is fn + F4. Then, i choose extend to right. but no result. When i tried to share it on google meet it only show which window / entire screen.
Fabby
5 July 2021 18:10
6
Take mirror instead of extend.