Release with working WIFI on radxa zero

HI all,

I had tried several manajaro releases from 23.02 or [Dev 20230612], xfce or headless - no success with wifi working on my radxa zero ver. 1.51 4GB RAM 16 GB eMMC
wifi adapter always just absent on system (checked - it is working ok for me on other linux releases like debian for example)

Any ideas how to overcome it ?

Welcome to Manjaro! :smiling_face_with_three_hearts:

  1. Please read the information behind this link. It will help you to post necessary information.
  1. Please press the three dots … below your post and then press the :pencil2:
  • If you give us information about your system, we can see what we’re talking about and make better suggestions.
  • You can do this by using inxi in a terminal or in console.
sudo inxi --verbosity=8 --filter --width 
  • Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
  • Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.
  1. Copy the output from inxi (including the command) and paste it into your post.
  • To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

Have you already :mag: for your problem in the forum ? (Wisdom lies in asking → listening → reading :wink: )

Most of images I installed on built in eMMC drive
A lot of them refuse to start if I put them on SD card.

Just tested today again:

https://github.com/manjaro-arm/radxa-zero-images/releases/download/23.02/Manjaro-ARM-minimal-radxa-zero-23.02.img.xz
That failed to start from SD but was ok on eMMC
Wifi not working

https://github.com/manjaro-arm/radxa-zero-images/releases/download/23.02/Manjaro-ARM-gnome-radxa-zero-23.02.img.xz
OK on SD card
Wifi not working

https://github.com/manjaro-arm/radxa-zero-images/releases/download/23.02/Manjaro-ARM-xfce-radxa-zero-23.02.img.xz
That one I succeded to install on SD card and on emmc
Wifi not working:

nmcli dev
DEVICE TYPE STATE CONNECTION
lo loopback unmanaged –

nmcli radio
WIFI-HW WIFI WWAN-HW WWAN
missing enabled missing enabled

inxi --verbosity=8 --filter --width:

System:
Kernel: 6.1.12-1-MANJARO-ARM arch: aarch64 bits: 64 compiler: gcc v: 12.1.0
parameters: initrd=/initramfs-linux.img root=PARTUUID=b435d49e-02 rw
console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0
fsck.fix=yes fsck.repair=yes net.ifnames=0 quiet splash
plymouth.ignore-serial-consoles
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 dm: LightDM v: 1.32.0 Distro: Manjaro ARM base: Arch Linux
Machine:
Type: ARM System: Radxa Zero details: N/A
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial:
charge: 55% (should be ignored) rechargeable: yes status: discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Keyboard K540/K545
serial: charge: 100% (should be ignored) rechargeable: yes
status: discharging
Memory:
RAM: total: 3.69 GiB used: 738.8 MiB (19.5%)
RAM Report: missing: Required tool dmidecode not installed. Check
–recommends
PCI Slots:
Message: No ARM data found for this feature.
CPU:
Info: model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8
model-id: 0 stepping: 4
Topology: cpus: 1x cores: 4 smt: cache: N/A
Speed (MHz): avg: 1512 min/max: 100/1800 scaling: driver: cpufreq-dt
governor: schedutil cores: 1: 1512 2: 1512 3: 1512 4: 1512 bogomips: N/A
Features: aes asimd cpuid crc32 evtstrm fp pmull sha1 sha2
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 status: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: meson-g12a-vpu driver: meson_drm v: kernel bus-ID: N/A
chip-ID: amlogic:ff900000 class-ID: vpu
Device-2: meson-g12a-mali driver: panfrost v: kernel bus-ID: N/A
chip-ID: amlogic:ffe40000 class-ID: gpu
Device-3: meson-g12a-dw-hdmi driver: meson_dw_hdmi v: kernel bus-ID: N/A
chip-ID: amlogic:ff600000 class-ID: hdmi-tx
Display: x11 server: X.Org v: 21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting dri: meson gpu: meson-drm display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
s-diag: 777mm (30.58")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Dell U2515H serial:
built: 2015 res: 2560x1440 hz: 60 dpi: 118 gamma: 1.2 chroma: red: x: 0.663
y: 0.333 green: x: 0.302 y: 0.616 blue: x: 0.149 y: 0.059 white: x: 0.314
y: 0.329 size: 553x311mm (21.77x12.24") diag: 634mm (25") ratio: 16:9
modes: 2560x1440, 2048x1152, 1920x1200, 1920x1080, 1920x1080i, 1600x1200,
1680x1050, 1280x1024, 1152x864, 1280x720, 1024x768, 800x600, 720x576,
720x480, 640x480
API: OpenGL v: 3.1 Mesa 22.3.5 renderer: Mali-G31 (Panfrost)
direct-render: Yes
Audio:
Device-1: meson-g12a-dw-hdmi driver: meson_dw_hdmi v: kernel bus-ID: N/A
chip-ID: amlogic:ff600000 class-ID: hdmi-tx
Device-2: axg-sound-card driver: axg_sound_card bus-ID: N/A
chip-ID: amlogic:sound class-ID: sound
Sound API: ALSA v: k6.1.12-1-MANJARO-ARM running: yes
Sound Server-1: JACK v: 1.9.22 running: no
Sound Server-2: PulseAudio v: 16.1 running: no
Sound Server-3: PipeWire v: 0.3.65 running: yes
Network:
Device-1: pwm-clock driver: pwm_clock v: N/A port: N/A bus-ID: N/A
chip-ID: pwm-clock:wifi32k class-ID: wifi32k
Device-2: dwmac driver: N/A port: N/A bus-ID: N/A chip-ID: amlogic:soc
class-ID: ethernet
WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig
Bluetooth:
Device-1: meson-gx-uart driver: meson_uart bus-ID: N/A
chip-ID: amlogic:ffd24000 class-ID: serial
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 29.19 GiB used: 3.14 GiB (10.8%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/mmcblk0 maj-min: 179:0 model: SD size: 14.74 GiB block-size:
physical: 512 B logical: 512 B type: SSD serial: scheme: MBR
ID-2: /dev/mmcblk1 maj-min: 179:32 model: D9D16G size: 14.45 GiB
block-size: physical: 512 B logical: 512 B type: SSD serial:
rev: 0x8 scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 14.26 GiB size: 13.96 GiB (97.91%) used: 3.09 GiB (22.2%)
fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2
label: ROOT_MNJRO uuid: 7ddabee0-48cb-4c90-9016-f342c303317f
ID-2: /boot raw-size: 457.8 MiB size: 457.5 MiB (99.94%)
used: 46.1 MiB (10.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1
maj-min: 179:1 label: BOOT_MNJRO uuid: 5B2D-FB1B
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 80 (default 100)
ID-1: swap-1 type: zram size: 5.54 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Unmounted:
ID-1: /dev/mmcblk1boot0 maj-min: 179:64 size: 4 MiB fs: N/A label: N/A
uuid: N/A
ID-2: /dev/mmcblk1boot1 maj-min: 179:96 size: 4 MiB fs: N/A label: N/A
uuid: N/A
ID-3: /dev/mmcblk1p1 maj-min: 179:33 size: 14.45 GiB fs: N/A label: N/A
uuid: N/A
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-1:2 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 98mA chip-ID: 046d:c52b class-ID: 0300
Hub-2: 2-0:1 info: Super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 43.2 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: pacman pkgs: 648 libs: 189 tools: pamac
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://codingflyboy.mm.fcix.net/manjaro/arm-stable/$repo/$arch
2: https://mirrors.xtom.ee/manjaro/arm-stable/$repo/$arch
3: https://mirror.dkm.cz/manjaro/arm-stable/$repo/$arch
4: https://muug.ca/mirror/manjaro/arm-stable/$repo/$arch
5: https://mirrors.ustc.edu.cn/manjaro/arm-stable/$repo/$arch
6: https://mirror.koddos.net/manjaro/arm-stable/$repo/$arch
7: https://ba.mirror.garr.it/mirrors/manjaro/arm-stable/$repo/$arch
8: https://mirror1.cl.netactuate.com/manjaro/arm-stable/$repo/$arch
9: https://ftp.caliu.cat/pub/distribucions/manjaro/arm-stable/$repo/$arch
10: https://mirrors.manjaro.org/repo/arm-stable/$repo/$arch
11: https://manjaro.c3sl.ufpr.br/arm-stable/$repo/$arch
12: https://mirrors.tuna.tsinghua.edu.cn/manjaro/arm-stable/$repo/$arch
13: https://manjaro.mirror.garr.it/manjaro/arm-stable/$repo/$arch
14: https://mirror.math.princeton.edu/pub/manjaro/arm-stable/$repo/$arch
15: https://quantum-mirror.hu/mirrors/pub/manjaro/arm-stable/$repo/$arch
16: https://manjaro.ynh.ovh/arm-stable/$repo/$arch
17: https://ftp.psnc.pl/linux/manjaro/arm-stable/$repo/$arch
18: https://mirror.freedif.org/Manjaro/arm-stable/$repo/$arch
19: https://mirror.it4i.cz/manjaro/arm-stable/$repo/$arch
20: https://ftp.halifax.rwth-aachen.de/manjaro/arm-stable/$repo/$arch
21: https://manjaro.mirror.liquidtelecom.com/arm-stable/$repo/$arch
22: https://mirror.archlinux.tw/Manjaro/arm-stable/$repo/$arch
23: https://mirror.funami.tech/manjaro/arm-stable/$repo/$arch
24: https://mirror2.sandyriver.net/pub/manjaro/arm-stable/$repo/$arch
25: https://mirrors.dotsrc.org/manjaro/arm-stable/$repo/$arch
26: https://ftp.cc.uoc.gr/mirrors/linux/manjaro/arm-stable/$repo/$arch
27: https://mnvoip.mm.fcix.net/manjaro/arm-stable/$repo/$arch
28: https://mirror.csclub.uwaterloo.ca/manjaro/arm-stable/$repo/$arch
29: https://mirrors.nic.cz/manjaro/arm-stable/$repo/$arch
30: https://mirrors.up.pt/pub/manjaro/arm-stable/$repo/$arch
31: https://edgeuno-bog2.mm.fcix.net/manjaro/arm-stable/$repo/$arch
32: https://mirror.telepoint.bg/manjaro/arm-stable/$repo/$arch
33: https://southfront.mm.fcix.net/manjaro/arm-stable/$repo/$arch
34: https://download.nus.edu.sg/mirror/manjaro/arm-stable/$repo/$arch
35: https://mirrors.ucr.ac.cr/manjaro/arm-stable/$repo/$arch
36: https://mirrors.piconets.webwerks.in/manjaro-mirror/arm-stable/$repo/$arch
37: https://ridgewireless.mm.fcix.net/manjaro/arm-stable/$repo/$arch
38: https://mirror.cyberhost.uk/sites/manjaro/arm-stable/$repo/$arch
39: https://mirror.ibakerserver.pt/manjaro/arm-stable/$repo/$arch
40: https://linorg.usp.br/manjaro/arm-stable/$repo/$arch
41: https://mirrors.huaweicloud.com/manjaro/arm-stable/$repo/$arch
42: https://mirrors.sonic.net/manjaro/arm-stable/$repo/$arch
43: https://mirror.init7.net/manjaro/arm-stable/$repo/$arch
44: https://mirror.truenetwork.ru/manjaro/arm-stable/$repo/$arch
45: https://mirror.easyname.at/manjaro/arm-stable/$repo/$arch
46: https://uvermont.mm.fcix.net/manjaro/arm-stable/$repo/$arch
47: https://mirror.2degrees.nz/manjaro/arm-stable/$repo/$arch
48: https://mirrors.xtom.jp/manjaro/arm-stable/$repo/$arch
49: https://bd.mirror.vanehost.com/Manjaro/arm-stable/$repo/$arch
50: https://mirror.ufro.cl/manjaro/arm-stable/$repo/$arch
51: https://ftpmirror1.infania.net/mirror/manjaro/arm-stable/$repo/$arch
52: https://mirrors.pku.edu.cn/manjaro/arm-stable/$repo/$arch
53: https://mirror.alpix.eu/manjaro/arm-stable/$repo/$arch
54: https://repo.iut.ac.ir/repo/manjaro/arm-stable/$repo/$arch
55: https://fastmirror.pp.ua/manjaro/arm-stable/$repo/$arch
56: https://manjaro.repo.cure.edu.uy/arm-stable/$repo/$arch
57: https://mirrors.ft.uam.es/manjaro/arm-stable/$repo/$arch
58: https://mirrors.tuna.tsinghua.edu.cn/manjaro/arm-stable/$repo/$arch
59: https://mirrors.fossho.st/manjaro/arm-stable/$repo/$arch
60: https://gsl-syd.mm.fcix.net/manjaro/arm-stable/$repo/$arch
61: https://forksystems.mm.fcix.net/manjaro/arm-stable/$repo/$arch
62: https://mirror.netcologne.de/manjaro/arm-stable/$repo/$arch
63: https://ftp.gwdg.de/pub/linux/manjaro/arm-stable/$repo/$arch
64: https://mirror.ufam.edu.br/manjaro/arm-stable/$repo/$arch
65: https://mirror.aarnet.edu.au/pub/manjaro/arm-stable/$repo/$arch
66: https://manjaro.mirrors.lavatech.top/arm-stable/$repo/$arch
67: https://mirrors.gethosted.online/manjaro/repos/arm-stable/$repo/$arch
68: https://mirrors.ocf.berkeley.edu/manjaro/arm-stable/$repo/$arch
69: https://manjaro.osmir.ch/arm-stable/$repo/$arch
70: https://opencolo.mm.fcix.net/manjaro/arm-stable/$repo/$arch
71: https://mirror.xenyth.net/manjaro/arm-stable/$repo/$arch
72: https://coresite.mm.fcix.net/manjaro/arm-stable/$repo/$arch
73: https://manjaro.kyberorg.fi/arm-stable/$repo/$arch
74: https://repos.silknet.com/manjaro/arm-stable/$repo/$arch
75: https://nnenix.mm.fcix.net/manjaro/arm-stable/$repo/$arch
76: https://mirror.zetup.net/manjaro/arm-stable/$repo/$arch
77: https://mirror.kku.ac.th/manjaro/arm-stable/$repo/$arch
78: https://ftp.icm.edu.pl/pub/Linux/dist/manjaro/arm-stable/$repo/$arch
79: https://mirror.23m.com/manjaro/arm-stable/$repo/$arch
80: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/arm-stable/$repo/$arch
81: https://mirror.nju.edu.cn/manjaro/arm-stable/$repo/$arch
82: https://manjaro.ipacct.com/manjaro/arm-stable/$repo/$arch
83: https://mirrors.xtom.de/manjaro/arm-stable/$repo/$arch
84: https://mirrors.netix.net/manjaro/arm-stable/$repo/$arch
85: https://manjaro.astra.in.ua/arm-stable/$repo/$arch
86: https://mirror.albony.xyz/manjaro/arm-stable/$repo/$arch
87: https://mirror.yandex.ru/mirrors/manjaro/arm-stable/$repo/$arch
88: https://mirror.kamtv.ru/manjaro/arm-stable/$repo/$arch
89: https://repo.skni.umcs.pl/manjaro/arm-stable/$repo/$arch
90: https://mirror.moson.org/manjaro/arm-stable/$repo/$arch
91: https://ct.mirror.garr.it/mirrors/manjaro/arm-stable/$repo/$arch
92: https://ftp.lysator.liu.se/pub/manjaro/arm-stable/$repo/$arch
93: https://ziply.mm.fcix.net/manjaro/arm-stable/$repo/$arch
94: https://mirrors.sjtug.sjtu.edu.cn/manjaro/arm-stable/$repo/$arch
95: https://mirror.futureweb.be/manjaro/arm-stable/$repo/$arch
96: https://osmirror.org/manjaro/arm-stable/$repo/$arch
97: https://ftp.nluug.nl/pub/os/Linux/distr/manjaro/arm-stable/$repo/$arch
98: https://manjaro.lucassymons.net/arm-stable/$repo/$arch
99: https://mirror.bardia.tech/manjaro/arm-stable/$repo/$arch
100: https://repo.ialab.dsu.edu/manjaro/arm-stable/$repo/$arch
Processes:
CPU top: 5 of 192
1: cpu: 8.5% command: xorg pid: 614 mem: 93.7 MiB (2.4%)
2: cpu: 4.9% command: [sugov:0] pid: 341 mem: 0.00 MiB (0.0%)
3: cpu: 4.2% command: xfce4-terminal pid: 1146 mem: 54.6 MiB (1.4%)
4: cpu: 3.0% command: ps pid: 1507 mem: 1.68 MiB (0.0%)
5: cpu: 2.7% command: blueman-applet started-by: python pid: 1052
mem: 64.6 MiB (1.7%)
Memory top: 5 of 192
1: mem: 102.7 MiB (2.7%) command: xfwm4 pid: 960 cpu: 2.2%
2: mem: 93.7 MiB (2.4%) command: xorg pid: 614 cpu: 8.5%
3: mem: 76.4 MiB (2.0%) command: xfce4-session pid: 895 cpu: 0.9%
4: mem: 64.6 MiB (1.7%) command: blueman-applet started-by: python
pid: 1052 cpu: 2.7%
5: mem: 57.9 MiB (1.5%) command: nm-applet pid: 1056 cpu: 0.6%
Info:
Processes: 192 Uptime: 2m Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: N/A Shell: Bash (su) v: 5.1.16
running-in: xfce4-terminal inxi: 3.3.25

dmesg:

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.12-1-MANJARO-ARM (builduser@on2-runner) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Tue Feb 14 22:16:04 UTC 2023
[ 0.000000] Machine model: Radxa Zero
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node ‘secmon@5000000’: base 0x0000000005000000, size 3 MiB
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e4800000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000f4806fff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000052fffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x00000000f4806fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4806fff]
[ 0.000000] On node 0, zone DMA: 14329 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 20 pages/cpu s42664 r8192 d31064 u81920
[ 0.000000] pcpu-alloc: s42664 r8192 d31064 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 985830
[ 0.000000] Kernel command line: initrd=/initramfs-linux.img root=PARTUUID=b435d49e-02 rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Unknown kernel command line parameters “splash”, will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 3596500K/4005916K available (12736K kernel code, 2418K rwdata, 5192K rodata, 3776K init, 669K bss, 147272K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000366] Console: colour dummy device 80x25
[ 0.000425] printk: console [tty0] enabled
[ 0.000463] Calibrating delay loop (skipped), value calculated using timer frequency… 48.00 BogoMIPS (lpj=240000)
[ 0.000475] pid_max: default: 32768 minimum: 301
[ 0.000693] LSM: Security Framework initializing
[ 0.000734] Yama: becoming mindful.
[ 0.000866] AppArmor: AppArmor initialized
[ 0.001040] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001066] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003060] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.003077] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003156] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003357] rcu: Hierarchical SRCU implementation.
[ 0.003362] rcu: Max phase no-delay instances is 1000.
[ 0.007657] EFI services will not be available.
[ 0.008227] smp: Bringing up secondary CPUs …
[ 0.008893] Detected VIPT I-cache on CPU1
[ 0.009047] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.009668] Detected VIPT I-cache on CPU2
[ 0.009764] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.010390] Detected VIPT I-cache on CPU3
[ 0.010487] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.010550] smp: Brought up 1 node, 4 CPUs
[ 0.010563] SMP: Total of 4 processors activated.
[ 0.010568] CPU features: detected: 32-bit EL0 Support
[ 0.010572] CPU features: detected: 32-bit EL1 Support
[ 0.010579] CPU features: detected: CRC32 instructions
[ 0.010645] CPU: All CPU(s) started at EL2
[ 0.010660] alternatives: applying system-wide alternatives
[ 0.012930] devtmpfs: initialized
[ 0.026050] Registered cp15_barrier emulation handler
[ 0.026076] Registered setend emulation handler
[ 0.026269] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.026288] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.033008] pinctrl core: initialized pinctrl subsystem
[ 0.033664] DMI not present or invalid.
[ 0.034343] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.035534] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.035679] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.035885] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.035929] audit: initializing netlink subsys (disabled)
[ 0.036165] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[ 0.037619] thermal_sys: Registered thermal governor ‘fair_share’
[ 0.037627] thermal_sys: Registered thermal governor ‘bang_bang’
[ 0.037631] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.037635] thermal_sys: Registered thermal governor ‘user_space’
[ 0.037690] cpuidle: using governor ladder
[ 0.037712] cpuidle: using governor menu
[ 0.037967] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.038072] ASID allocator initialised with 65536 entries
[ 0.039389] Serial: AMBA PL011 UART driver
[ 0.053717] platform ff900000.vpu: Fixing up cyclic dependency with ff600000.hdmi-tx
[ 0.058633] platform hdmi-connector: Fixing up cyclic dependency with ff600000.hdmi-tx
[ 0.069059] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.069080] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.069086] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.069090] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.069096] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.069100] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.069105] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.069109] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.069554] cryptd: max_cpu_qlen set to 1000
[ 0.070840] ACPI: Interpreter disabled.
[ 0.071826] iommu: Default domain type: Translated
[ 0.071834] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.072395] SCSI subsystem initialized
[ 0.072536] libata version 3.00 loaded.
[ 0.072774] usbcore: registered new interface driver usbfs
[ 0.072809] usbcore: registered new interface driver hub
[ 0.072835] usbcore: registered new device driver usb
[ 0.073196] pps_core: LinuxPPS API ver. 1 registered
[ 0.073202] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.073931] Advanced Linux Sound Architecture Driver Initialized.
[ 0.074561] NetLabel: Initializing
[ 0.074566] NetLabel: domain hash size = 128
[ 0.074571] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.074628] NetLabel: unlabeled traffic allowed by default
[ 0.074833] vgaarb: loaded
[ 0.075155] clocksource: Switched to clocksource arch_sys_counter
[ 0.075439] VFS: Disk quotas dquot_6.6.0
[ 0.075491] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.076106] AppArmor: AppArmor Filesystem Enabled
[ 0.076157] pnp: PnP ACPI: disabled
[ 0.083021] NET: Registered PF_INET protocol family
[ 0.083282] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.086323] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.086368] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.086384] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.086644] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.087500] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.087713] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.087808] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.088167] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.088217] PCI: CLS 0 bytes, default 64
[ 0.088846] Trying to unpack rootfs image as initramfs…
[ 0.089326] kvm [1]: IPA Size Limit: 40 bits
[ 0.105306] kvm [1]: vgic interrupt IRQ9
[ 0.105454] kvm [1]: Hyp mode initialized successfully
[ 0.107306] Initialise system trusted keyrings
[ 0.107553] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.113169] zbud: loaded
[ 0.152235] NET: Registered PF_ALG protocol family
[ 0.152268] Key type asymmetric registered
[ 0.152274] Asymmetric key parser ‘x509’ registered
[ 0.152409] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.152671] io scheduler mq-deadline registered
[ 0.152678] io scheduler kyber registered
[ 0.152922] io scheduler bfq registered
[ 0.158455] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.176793] soc soc0: Amlogic Meson G12A (S905Y2) Revision 28:c (30:2) Detected
[ 0.180179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.182009] Serial: AMBA driver
[ 0.182505] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 0.188345] printk: console [ttyAML0] enabled
[ 0.189314] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 15, base_baud = 1500000) is a meson_uart
[ 0.189453] serial serial0: tty port ttyAML6 registered
[ 0.196962] usbcore: registered new interface driver uas
[ 0.197035] usbcore: registered new interface driver usb-storage
[ 0.197128] usbcore: registered new interface driver usbserial_generic
[ 0.197150] usbserial: USB Serial support registered for generic
[ 0.198437] mousedev: PS/2 mouse device common for all mice
[ 0.198645] i2c_dev: i2c /dev entries driver
[ 0.201082] usbcore: registered new interface driver pcwd_usb
[ 0.201278] device-mapper: uevent: version 1.0.3
[ 0.201611] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 0.203516] sdhci: Secure Digital Host Controller Interface driver
[ 0.203534] sdhci: Copyright(c) Pierre Ossman
[ 0.203688] Synopsys Designware Multimedia Card Interface Driver
[ 0.204380] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.205038] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 0.205743] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.206096] No iBFT detected.
[ 0.206674] meson-sm: secure-monitor enabled
[ 0.207225] hid: raw HID events driver (C) Jiri Kosina
[ 0.207349] usbcore: registered new interface driver usbhid
[ 0.207356] usbhid: USB HID core driver
[ 0.209557] Initializing XFRM netlink socket
[ 0.210135] NET: Registered PF_INET6 protocol family
[ 0.271465] mmc0: new high speed SDHC card at address b368
[ 0.272673] mmcblk0: mmc0:b368 SD 14.7 GiB
[ 0.275214] mmcblk0: p1 p2
[ 0.422177] Freeing initrd memory: 8224K
[ 0.458571] Segment Routing with IPv6
[ 0.458650] In-situ OAM (IOAM) with IPv6
[ 0.458727] mip6: Mobile IPv6
[ 0.458750] NET: Registered PF_PACKET protocol family
[ 0.459782] registered taskstats version 1
[ 0.459808] Loading compiled-in X.509 certificates
[ 0.460626] zswap: loaded using pool lzo/zbud
[ 0.460820] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 0.461180] Key type .fscrypt registered
[ 0.461186] Key type fscrypt-provisioning registered
[ 0.461846] Key type encrypted registered
[ 0.616825] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 0.616847] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 0.619969] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 0.620075] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 0.620402] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 0.621714] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.621927] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 0.622072] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[ 0.622121] xhci-hcd xhci-hcd.0.auto: irq 19, io mem 0xff500000
[ 0.622288] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.622413] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 0.622426] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.622605] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.622616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.622625] usb usb1: Product: xHCI Host Controller
[ 0.622632] usb usb1: Manufacturer: Linux 6.1.12-1-MANJARO-ARM xhci-hcd
[ 0.622638] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 0.623039] hub 1-0:1.0: USB hub found
[ 0.623070] hub 1-0:1.0: 2 ports detected
[ 0.623473] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 0.623587] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.623598] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.623606] usb usb2: Product: xHCI Host Controller
[ 0.623613] usb usb2: Manufacturer: Linux 6.1.12-1-MANJARO-ARM xhci-hcd
[ 0.623620] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 0.623982] hub 2-0:1.0: USB hub found
[ 0.624009] hub 2-0:1.0: 1 port detected
[ 0.625226] OF: graph: no port node found in /soc/bus@ffd00000/i2c@1c000/fusb302@22
[ 0.642004] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 0.643542] ALSA device list:
[ 0.643564] No soundcards found.
[ 0.670026] Freeing unused kernel memory: 3776K
[ 0.705290] Run /init as init process
[ 0.705310] with arguments:
[ 0.705317] /init
[ 0.705322] splash
[ 0.705327] with environment:
[ 0.705332] HOME=/
[ 0.705337] TERM=linux
[ 0.831492] meson-drm ff900000.vpu: Queued 1 outputs on vpu
[ 0.844013] meson-drm ff900000.vpu: CVBS Output connector not available
[ 0.885586] meson-drm ff900000.vpu: Couldn’t bind all components
[ 0.892986] meson-drm ff900000.vpu: CVBS Output connector not available
[ 0.905249] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[ 0.925260] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 0.925970] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 0.926350] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 0.927164] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[ 1.074614] mmc1: new HS200 MMC card at address 0001
[ 1.075831] mmcblk1: mmc1:0001 D9D16G 14.5 GiB
[ 1.078260] mmcblk1: p1
[ 1.079266] mmcblk1boot0: mmc1:0001 D9D16G 4.00 MiB
[ 1.081854] mmcblk1boot1: mmc1:0001 D9D16G 4.00 MiB
[ 1.084084] mmcblk1rpmb: mmc1:0001 D9D16G 4.00 MiB, chardev (245:0)
[ 1.088673] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[ 1.088700] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.088709] usb 1-1: Product: USB Receiver
[ 1.088716] usb 1-1: Manufacturer: Logitech
[ 1.123081] input: Logitech USB Receiver as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:046D:C52B.0001/input/input0
[ 1.186049] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1/input0
[ 1.194378] input: Logitech USB Receiver Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input1
[ 1.195037] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input2
[ 1.265619] input: Logitech USB Receiver System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input3
[ 1.266234] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1/input1
[ 1.273778] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1/input2
[ 1.573964] Console: switching to colour frame buffer device 320x90
[ 1.617346] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 2.406735] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.270625] systemd[1]: System time before build time, advancing clock.
[ 3.436228] systemd[1]: systemd 252.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 3.436275] systemd[1]: Detected architecture arm64.
[ 3.456093] systemd[1]: Hostname set to .
[ 3.777088] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[ 4.678588] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.720997] systemd[1]: Created slice Slice /system/getty.
[ 4.723497] systemd[1]: Created slice Slice /system/modprobe.
[ 4.725596] systemd[1]: Created slice Slice /system/serial-getty.
[ 4.727255] systemd[1]: Created slice User and Session Slice.
[ 4.727817] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.728916] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.729278] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 4.729498] systemd[1]: Reached target Remote Encrypted Volumes.
[ 4.729586] systemd[1]: Reached target Remote File Systems.
[ 4.729683] systemd[1]: Reached target Slice Units.
[ 4.729808] systemd[1]: Reached target Swaps.
[ 4.729974] systemd[1]: Reached target Local Verity Protected Volumes.
[ 4.730527] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.732740] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.744679] systemd[1]: Listening on Process Core Dump Socket.
[ 4.746003] systemd[1]: Listening on Journal Audit Socket.
[ 4.746945] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.747889] systemd[1]: Listening on Journal Socket.
[ 4.749023] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.750941] systemd[1]: Listening on udev Control Socket.
[ 4.751706] systemd[1]: Listening on udev Kernel Socket.
[ 4.752442] systemd[1]: Listening on User Database Manager Socket.
[ 4.758274] systemd[1]: Mounting Huge Pages File System…
[ 4.764438] systemd[1]: Mounting POSIX Message Queue File System…
[ 4.770770] systemd[1]: Mounting Kernel Debug File System…
[ 4.771974] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[ 4.779236] systemd[1]: Mounting Temporary Directory /tmp…
[ 4.785947] systemd[1]: Starting Create List of Static Device Nodes…
[ 4.791845] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling…
[ 4.799282] systemd[1]: Starting Load Kernel Module configfs…
[ 4.806204] systemd[1]: Starting Load Kernel Module drm…
[ 4.813292] systemd[1]: Starting Load Kernel Module efi_pstore…
[ 4.820501] systemd[1]: Starting Load Kernel Module fuse…
[ 4.821457] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 4.832351] systemd[1]: Starting Journal Service…
[ 4.872869] systemd[1]: Starting Load Kernel Modules…
[ 4.879862] systemd[1]: Starting Generate network units from Kernel command line…
[ 4.880944] fuse: init (API version 7.37)
[ 4.886745] systemd[1]: Starting Remount Root and Kernel File Systems…
[ 4.887420] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 4.893982] systemd[1]: Starting Coldplug All udev Devices…
[ 4.901028] systemd[1]: Starting Setup Virtual Console…
[ 4.915557] systemd[1]: Mounted Huge Pages File System.
[ 4.916799] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.917967] systemd[1]: Mounted Kernel Debug File System.
[ 4.919199] systemd[1]: Mounted Temporary Directory /tmp.
[ 4.921220] systemd[1]: Finished Create List of Static Device Nodes.
[ 4.924301] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4.925724] systemd[1]: Finished Load Kernel Module configfs.
[ 4.928461] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.929936] systemd[1]: Finished Load Kernel Module drm.
[ 4.932433] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 4.933659] systemd[1]: Finished Load Kernel Module fuse.
[ 4.944015] systemd[1]: Mounting FUSE Control File System…
[ 4.955102] systemd[1]: Mounting Kernel Configuration File System…
[ 4.962612] systemd[1]: Finished Generate network units from Kernel command line.
[ 4.964053] systemd[1]: Mounted FUSE Control File System.
[ 4.965002] systemd[1]: Reached target Preparation for Network.
[ 4.969102] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 4.975958] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 4.977122] systemd[1]: Mounted Kernel Configuration File System.
[ 5.059735] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 5.126044] systemd[1]: Starting Load/Save Random Seed…
[ 5.126630] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 5.132729] systemd[1]: Starting Create Static Device Nodes in /dev…
[ 5.134672] systemd[1]: Started Journal Service.
[ 5.135484] audit: type=1130 audit(1675140683.860:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-journald comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.153467] audit: type=1130 audit(1675140683.870:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=modprobe@efi_pstore comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.153718] audit: type=1131 audit(1675140683.870:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=modprobe@efi_pstore comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.156063] audit: type=1130 audit(1675140683.880:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-modules-load comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.215988] systemd-journald[279]: Received client request to flush runtime journal.
[ 5.794509] audit: type=1130 audit(1675140684.510:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-udev-trigger comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.807555] audit: type=1130 audit(1675140684.530:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-sysctl comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.837697] audit: type=1130 audit(1675140684.560:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-journal-flush comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.861167] audit: type=1130 audit(1675140684.580:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-tmpfiles-setup-dev comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.861209] audit: type=1334 audit(1675140684.580:10): prog-id=19 op=LOAD
[ 5.861222] audit: type=1334 audit(1675140684.580:11): prog-id=20 op=LOAD
[ 6.677363] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { P313 } 3 jiffies s: 113 root: 0x0/T
[ 6.682237] rcu: blocking rcu_node structures (internal RCU debug):
[ 7.981353] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 7.981396] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:07 UTC (7)
[ 7.989043] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
[ 8.042468] debugfs: Directory ‘ff800280.cec’ with parent ‘regmap’ already present!
[ 8.045201] random: crng init done
[ 8.059706] Registered IR keymap rc-cec
[ 8.077332] rc rc0: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0
[ 8.089353] input: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0/input5
[ 8.142803] mc: Linux media interface: v0.10
[ 8.160676] mmc2: new ultra high speed SDR50 SDIO card at address 0001
[ 8.689626] panfrost ffe40000.gpu: clock rate = 24000000
[ 8.689727] panfrost ffe40000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
[ 8.694952] videodev: Linux video capture interface: v2.00
[ 8.695562] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[ 8.695588] panfrost ffe40000.gpu: features: 00000000,000027f7, issues: 00000000,00000400
[ 8.695595] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[ 8.695602] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
[ 8.704391] [drm] Initialized panfrost 1.2.0 20180908 for ffe40000.gpu on minor 1
[ 8.882169] Bluetooth: Core ver 2.22
[ 8.884123] NET: Registered PF_BLUETOOTH protocol family
[ 8.884148] Bluetooth: HCI device and connection manager initialized
[ 8.884165] Bluetooth: HCI socket layer initialized
[ 8.884174] Bluetooth: L2CAP socket layer initialized
[ 8.884195] Bluetooth: SCO socket layer initialized
[ 8.910770] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1/input2
[ 8.953816] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.956410] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.958213] usbcore: registered new interface driver brcmfmac
[ 8.966248] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.radxa,zero.bin failed with error -2
[ 8.966371] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2
[ 8.976662] Bluetooth: HCI UART driver ver 2.3
[ 8.976696] Bluetooth: HCI UART protocol H4 registered
[ 8.976700] Bluetooth: HCI UART protocol BCSP registered
[ 8.976833] Bluetooth: HCI UART protocol LL registered
[ 8.976838] Bluetooth: HCI UART protocol ATH3K registered
[ 8.976876] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 8.977198] Bluetooth: HCI UART protocol Intel registered
[ 8.977454] Bluetooth: HCI UART protocol Broadcom registered
[ 8.977632] Bluetooth: HCI UART protocol QCA registered
[ 8.977670] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 8.977687] Bluetooth: HCI UART protocol Marvell registered
[ 8.977827] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 9.050908] input: Logitech Wireless Device PID:4069 Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input6
[ 9.051575] input: Logitech Wireless Device PID:4069 Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input7
[ 9.051915] hid-generic 0003:046D:4069.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4069] on usb-xhci-hcd.0.auto-1/input2:1
[ 9.053778] input: Logitech Wireless Device PID:4076 Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4076.0005/input/input11
[ 9.054582] hid-generic 0003:046D:4076.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4076] on usb-xhci-hcd.0.auto-1/input2:2
[ 9.058403] input: Logitech Wireless Device PID:4055 Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4055.0006/input/input15
[ 9.058884] hid-generic 0003:046D:4055.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:4055] on usb-xhci-hcd.0.auto-1/input2:3
[ 9.365825] Bluetooth: hci0: BCM: chip id 107
[ 9.366111] Bluetooth: hci0: BCM: features 0x2f
[ 9.367655] Bluetooth: hci0: BCM4345C0
[ 9.367682] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 9.368259] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 9.369242] Bluetooth: hci0: BCM: ‘brcm/BCM4345C0.radxa,zero.hcd’
[ 9.375546] Bluetooth: hci0: BCM: ‘brcm/BCM4345C0.hcd’
[ 9.380466] Bluetooth: hci0: BCM: ‘brcm/BCM.radxa,zero.hcd’
[ 9.386181] Bluetooth: hci0: BCM: ‘brcm/BCM.hcd’
[ 9.912956] input: Logitech MX Master 2S as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input19
[ 9.913596] logitech-hidpp-device 0003:046D:4069.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-xhci-hcd.0.auto-1/input2:1
[ 9.975331] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 10.285845] input: Logitech K540/K545 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4076.0005/input/input20
[ 10.287248] logitech-hidpp-device 0003:046D:4076.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K540/K545] on usb-xhci-hcd.0.auto-1/input2:2
[ 10.394830] kauditd_printk_skb: 22 callbacks suppressed
[ 10.394845] audit: type=1130 audit(1675141310.580:34): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-resolved comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 10.418553] logitech-hidpp-device 0003:046D:4055.0006: HID++ 4.5 device connected.
[ 10.502295] audit: type=1130 audit(1675141310.690:35): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=sound comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 10.516819] audit: type=1334 audit(1675141310.710:36): prog-id=27 op=LOAD
[ 10.517559] audit: type=1334 audit(1675141310.710:37): prog-id=28 op=LOAD
[ 10.517984] audit: type=1334 audit(1675141310.710:38): prog-id=29 op=LOAD
[ 10.534728] audit: type=1130 audit(1675141310.720:39): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=alsa-restore comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.014226] zram: Added device: zram0
[ 11.025870] zram0: detected capacity change from 0 to 11611936
[ 11.131551] Adding 5805964k swap on /dev/zram0. Priority:100 extents:1 across:5805964k SSFS
[ 11.141701] audit: type=1130 audit(1675141311.330:40): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=zswap-arm comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.177117] audit: type=1130 audit(1675141311.370:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=udisks2-zram-setup@zram0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.177146] audit: type=1131 audit(1675141311.370:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=udisks2-zram-setup@zram0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.352478] audit: type=1130 audit(1675141311.540:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=dbus comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 11.417518] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.417544] Bluetooth: BNEP filters: protocol multicast
[ 11.417560] Bluetooth: BNEP socket layer initialized
[ 11.426027] Bluetooth: MGMT ver 1.22
[ 11.434830] input: Logitech Wireless Device PID:4055 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4055.0006/input/input21
[ 11.443420] logitech-hidpp-device 0003:046D:4055.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:4055] on usb-xhci-hcd.0.auto-1/input2:3
[ 17.780305] kauditd_printk_skb: 24 callbacks suppressed
[ 17.780319] audit: type=1334 audit(1675141317.970:68): prog-id=35 op=LOAD
[ 17.781040] audit: type=1334 audit(1675141317.970:69): prog-id=36 op=LOAD
[ 17.781177] audit: type=1334 audit(1675141317.970:70): prog-id=37 op=LOAD
[ 17.784438] audit: type=1334 audit(1675141317.970:71): prog-id=38 op=LOAD
[ 17.788262] audit: type=1334 audit(1675141317.980:72): prog-id=39 op=LOAD
[ 17.794785] audit: type=1334 audit(1675141317.980:73): prog-id=40 op=LOAD
[ 17.795468] audit: type=1334 audit(1675141317.990:74): prog-id=41 op=LOAD
[ 17.795616] audit: type=1334 audit(1675141317.990:75): prog-id=42 op=LOAD
[ 17.797115] audit: type=1334 audit(1675141317.990:76): prog-id=43 op=LOAD
[ 17.797569] audit: type=1334 audit(1675141317.990:77): prog-id=44 op=LOAD
[ 20.318447] platform ff64c000.mdio-multiplexer: deferred probe pending
[ 29.511840] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.513170] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.521333] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.527795] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.535830] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.542321] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.550407] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.556942] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.564930] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.571494] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.580432] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.586106] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.594100] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.600665] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.608716] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.615225] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.623226] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.629797] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.637819] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.644354] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.675980] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.677312] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.685762] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.691951] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.700231] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.706562] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.714848] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.721181] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.729443] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.735815] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.746013] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.750234] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.758659] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.764788] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.773473] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.779457] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.787779] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.794060] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.802322] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1
[ 29.808623] fe.dai-link-1: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-1: -22
[ 29.817826] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.823189] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.831270] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.837754] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.846142] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.852353] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.860722] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.866924] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.875309] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.881491] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.891601] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.896125] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.904580] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.910761] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.919165] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.925286] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.933523] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.939831] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.951075] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.954280] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.964104] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.969032] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.977397] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.983927] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 29.991855] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 29.998073] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.006304] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 30.012567] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.020917] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 30.027628] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.037597] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 30.041723] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.050701] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 30.056727] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.064616] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 30.071690] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.079701] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 30.085944] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.093793] fe.dai-link-2: ASoC: no backend DAIs enabled for fe.dai-link-2
[ 30.100672] fe.dai-link-2: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-2: -22
[ 30.144999] Bluetooth: RFCOMM TTY layer initialized
[ 30.145037] Bluetooth: RFCOMM socket layer initialized
[ 30.145068] Bluetooth: RFCOMM ver 1.11
[ 33.078630] kauditd_printk_skb: 46 callbacks suppressed
[ 33.078655] audit: type=1100 audit(1675141333.270:120): pid=1049 uid=1000 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:authentication grantors=? acct=“admin” exe=“/usr/bin/sudo” hostname=? addr=? terminal=? res=failed’
[ 34.696394] audit: type=1334 audit(1675141334.890:121): prog-id=54 op=LOAD
[ 34.696783] audit: type=1334 audit(1675141334.890:122): prog-id=55 op=LOAD
[ 42.125725] audit: type=1131 audit(1675141342.320:123): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-hostnamed comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 42.305720] audit: type=1334 audit(1675141342.500:124): prog-id=51 op=UNLOAD
[ 42.305748] audit: type=1334 audit(1675141342.500:125): prog-id=50 op=UNLOAD
[ 42.305756] audit: type=1334 audit(1675141342.500:126): prog-id=49 op=UNLOAD
[ 42.584015] audit: type=1130 audit(1675141342.770:127): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=udisks2 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 45.774572] audit: type=1130 audit(1675141345.960:128): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=upower comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 49.602545] audit: type=1130 audit(1675141349.790:129): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=blueman-mechanism comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 51.368620] logitech-hidpp-device 0003:046D:4076.0005: HID++ 4.1 device connected.
[ 80.713901] audit: type=1131 audit(1675141380.900:130): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=blueman-mechanism comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 111.365891] audit: type=1100 audit(1675141411.560:131): pid=1375 uid=1000 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:authentication grantors=? acct=“admin” exe=“/usr/bin/sudo” hostname=? addr=? terminal=/dev/pts/0 res=failed’
[ 115.921896] audit: type=1100 audit(1675141416.110:132): pid=1375 uid=1000 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct=“admin” exe=“/usr/bin/sudo” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 115.923315] audit: type=1101 audit(1675141416.110:133): pid=1375 uid=1000 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct=“admin” exe=“/usr/bin/sudo” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 115.924535] audit: type=1110 audit(1675141416.110:134): pid=1375 uid=1000 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct=“root” exe=“/usr/bin/sudo” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 115.925371] audit: type=1105 audit(1675141416.120:135): pid=1375 uid=1000 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct=“root” exe=“/usr/bin/sudo” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 115.954977] audit: type=1100 audit(1675141416.140:136): pid=1376 uid=0 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:authentication grantors=pam_rootok acct=“root” exe=“/usr/bin/su” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 115.955413] audit: type=1101 audit(1675141416.150:137): pid=1376 uid=0 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:accounting grantors=pam_unix acct=“root” exe=“/usr/bin/su” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 115.957465] audit: type=1103 audit(1675141416.150:138): pid=1376 uid=0 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:setcred grantors=pam_rootok acct=“root” exe=“/usr/bin/su” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 115.958064] audit: type=1105 audit(1675141416.150:139): pid=1376 uid=0 auid=1000 ses=1 subj=unconfined msg=‘op=PAM:session_open grantors=pam_unix acct=“root” exe=“/usr/bin/su” hostname=? addr=? terminal=/dev/pts/0 res=success’
[ 127.410068] audit: type=1130 audit(1675141427.600:140): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-networkd-wait-online comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=failed’
[ 217.732136] audit: type=1130 audit(1675141517.920:141): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=nmb comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=failed’
[ 218.856440] audit: type=1130 audit(1675141519.050:142): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=smb comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 219.497772] audit: type=1115 audit(1675141519.690:143): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user entries id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 219.498160] audit: type=1115 audit(1675141519.690:144): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user from group id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 219.498251] audit: type=1115 audit(1675141519.690:145): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user from group id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 219.498326] audit: type=1115 audit(1675141519.690:146): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user from group id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 219.498385] audit: type=1115 audit(1675141519.690:147): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user from group id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 219.498448] audit: type=1115 audit(1675141519.690:148): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user from group id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 219.498509] audit: type=1115 audit(1675141519.690:149): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user from group id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 219.498570] audit: type=1115 audit(1675141519.690:150): pid=1628 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘op=deleting user from group id=984 exe=“/usr/bin/userdel” hostname=? addr=? terminal=? res=success’
[ 250.644577] kauditd_printk_skb: 21 callbacks suppressed
[ 250.644591] audit: type=1131 audit(1675141550.830:172): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg=‘unit=systemd-timedated comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 250.675561] audit: type=1334 audit(1675141550.870:173): prog-id=58 op=UNLOAD
[ 250.675594] audit: type=1334 audit(1675141550.870:174): prog-id=57 op=UNLOAD
[ 250.675605] audit: type=1334 audit(1675141550.870:175): prog-id=56 op=UNLOAD

Solution:
Download the missing “brcmfmac43455-sdio.bin” (and matching nvram .txt) and “BCM4345C0.hcd” files. You’ll find them all in here: GitHub - LibreELEC/brcmfmac_sdio-firmware: Broadcom SDIO firmware used with LibreELEC. Put them in /usr/lib/firmware/brcm/ and reboot.

1 Like

This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed.