oren
22 February 2022 11:39
1
System:
Kernel: 5.10.98-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: LENOVO product: 10TX000UGE v: V530S-07ICB
serial: <superuser required> Chassis: type: 3 serial: <superuser required>
Mobo: LENOVO model: 3140 v: SDK0J40697 WIN 3305168848004
serial: <superuser required> UEFI: LENOVO v: M22KT46A date: 02/20/2021
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 7.66 GiB used: 2.62 GiB (34.2%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 6-core model: Intel Core i5-8400 bits: 64 type: MCP
smt: <unsupported> arch: Coffee Lake rev: A cache: L1: 384 KiB L2: 1.5 MiB
L3: 9 MiB
Speed (MHz): avg: 800 min/max: 800/4000 cores: 1: 800 2: 800 3: 800
4: 800 5: 800 6: 800 bogomips: 33613
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon
art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm
lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx
pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36
pti pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2
sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Graphics:
Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] vendor: Lenovo
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e92 class-ID: 0300
Display: x11 server: X.Org 1.21.1.3 compositor: kwin_x11 driver:
loaded: modesetting alternate: fbdev,vesa resolution: 1920x1080~60Hz
s-dpi: 96
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Lenovo driver: snd_hda_intel
v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
Sound Server-1: ALSA v: k5.10.98-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.20 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.45 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel port: 3000 bus-ID: 02:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
driver: btusb v: 0.8 bus-ID: 1-8:6 chip-ID: 0a12:0001 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 2.96 TiB used: 1.36 TiB (46.1%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLB256HAHQ-000L7
size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 1L2QEXD7 temp: 29.9 C scheme: GPT
ID-2: /dev/sda vendor: Seagate model: ST1000DM010-2EP102 size: 931.51 GiB
speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: CC43 scheme: GPT
ID-3: /dev/sdb type: USB vendor: Seagate model: ST2000DL001-9VT156
size: 1.82 TiB type: HDD rpm: 5900 serial: <filter> rev: CC41 scheme: MBR
Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GUE0N rev: T.02
dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / size: 126.54 GiB used: 52.64 GiB (41.6%) fs: ext4
dev: /dev/nvme0n1p2 label: N/A uuid: 46de05b9-7840-45bf-9ec3-eb21586f64e8
ID-2: /boot/efi size: 299.4 MiB used: 60.8 MiB (20.3%) fs: vfat
dev: /dev/nvme0n1p1 label: N/A uuid: 444B-C2AC
ID-3: /mnt/sda1 size: 536.55 GiB used: 114.55 GiB (21.4%) fs: ntfs
dev: /dev/sda1 label: Sata-Linux uuid: 15DBE4263A439D94
ID-4: /run/media/oren/5ADE56F9DE56CD3F size: 108.59 GiB
used: 30.65 GiB (28.2%) fs: ntfs dev: /dev/nvme0n1p4 label: N/A
uuid: 5ADE56F9DE56CD3F
ID-5: /run/media/oren/Backup size: 1.82 TiB used: 1.02 TiB (56.2%)
fs: ntfs dev: /dev/sdb1 label: Backup uuid: 3A3090E83090ABFF
ID-6: /run/media/oren/timeshift size: 387.76 GiB used: 152.23 GiB (39.3%)
fs: ext4 dev: /dev/sda2 label: timeshift
uuid: 2e9b1c19-001a-4161-b5db-2fe289a107b4
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p3 size: 16 MiB fs: <superuser required> label: N/A
uuid: N/A
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-2:2 info: Logitech Unifying Receiver type: Keyboard,Mouse
driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 98mA chip-ID: 046d:c534 class-ID: 0301
Device-2: 1-4:4 info: SINO WEALTH Gaming KB type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
power: 500mA chip-ID: 258a:002a class-ID: 0300
Device-3: 1-6:5 info: Realtek RTS5129 Card Reader Controller
type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
class-ID: ff00 serial: <filter>
Device-4: 1-8:6 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 0a12:0001 class-ID: e001
Hub-2: 2-0:1 info: Super-speed hub ports: 6 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Device-1: 2-3:2 info: LaCie Minimus USB 3 type: Mass Storage
driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 059f:1042
class-ID: 0806 serial: <filter>
Sensors:
System Temperatures: cpu: 27.8 C pch: 49.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 270 Uptime: 8m wakeups: 0 Init: systemd v: 250 Compilers:
gcc: 11.1.0 clang: 13.0.1 Packages: 1742 pacman: 1718 flatpak: 12 snap: 12
Shell: fish v: 3.3.1 running-in: konsole inxi: 3.3.12
Dear friends, I have an ntfs sata disk, used for data (sda1). my system is dual boot manjaro/win 10.
Yesterday I discovered I cannot write into the disk while in manjaro (can when in Win).
Cannot change ownership (chown), and cannot change permissions (sudo chmod -R +rw .
trying the latter, I get recursive messages that the file system is read-only.
I also tried changing the mounting point, to no avail.
My fstab line looks like this:
“/dev/disk/by-uuid/15DBE4263A439D94 /mnt/sda1 auto nosuid,nodev,nofail,x-gvfs-show 0 0”
but I have also tried this:
“UUID=15DBE4263A439D94 /home/oren/sata ntfs-3g auto,nofail,uid=1000,gid=1000,utf8,umask=022,defaults 0 0”
As this is a data drive, I have backed up everything, so I can tinker with the drive with no risk.
Does anyone have an idea?
thank you very very much
Oren
Hi @oren ,
That is to be expected with NTFS, IIRC. Because NTFS doesn’t support these things and is implemented virtually. Nevertheless, they look like everything’s normal to you, the user.
You should check the drive for any errors:
sudo smartctl --all /dev/sda
How is it actually mounted?
mount -v
oren
22 February 2022 12:11
5
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5
Device Model: ST1000DM010-2EP102
Serial Number: ZN13L8EK
LU WWN Device Id: 5 000c50 0b4d48162
Firmware Version: CC43
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 22 13:09:53 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 058 006 Pre-fail Always - 106828336
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6965
5 Reallocated_Sector_Ct 0x0033 091 091 010 Pre-fail Always - 12144
7 Seek_Error_Rate 0x000f 067 060 045 Pre-fail Always - 17201279228
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9140
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4159
183 Runtime_Bad_Block 0x0032 094 094 000 Old_age Always - 6
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 072 072 000 Old_age Always - 28
188 Command_Timeout 0x0032 100 082 000 Old_age Always - 86 94 96
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 232
190 Airflow_Temperature_Cel 0x0022 062 047 040 Old_age Always - 38 (Min/Max 34/39)
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7060
194 Temperature_Celsius 0x0022 038 012 000 Old_age Always - 38 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 003 001 000 Old_age Always - 106828336
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7145h+12m+10.381s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11076604399
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14273246768
SMART Error Log Version: 1
ATA Error Count: 28 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:28.834 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:28.833 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:28.833 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:28.833 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:28.832 SET FEATURES [Set transfer mode]
Error 27 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:28.470 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:28.468 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:28.468 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:28.468 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:28.467 SET FEATURES [Set transfer mode]
Error 26 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:28.045 READ FPDMA QUEUED
60 00 08 20 06 29 4b 00 05:16:28.041 READ FPDMA QUEUED
60 00 08 18 06 29 4b 00 05:16:28.041 READ FPDMA QUEUED
60 00 08 10 06 29 4b 00 05:16:28.041 READ FPDMA QUEUED
60 00 08 08 06 29 4b 00 05:16:28.040 READ FPDMA QUEUED
Error 25 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:27.525 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:27.523 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:27.523 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:27.523 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:27.522 SET FEATURES [Set transfer mode]
Error 24 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:27.160 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:27.159 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:27.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:27.159 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:27.159 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3465 -
# 2 Short offline Completed without error 00% 3462 -
# 3 Short offline Completed without error 00% 2717 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
I
f Selective self-test is pending on power-up, resume after 0 minute delay.
Thank you very much for your response!
The above is the output of sudo smartctl --all /dev/sda1
Well, there are errors, but I don’t know how serious they are, because:
So, lets perform a short SMART test:
sudo smartctl -t short /dev/sda
Edit:
Followed by providing the output of:
sudo smartctl --all /dev/sda
…again, please.
oren
22 February 2022 12:43
7
Dear Mirdarthos,
the test does not go beyond it’s initial phase:
"=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Tue Feb 22 13:39:37 2022 CET
Use smartctl -X to abort test.
"
That’s why I edited my answer with:
oren
22 February 2022 12:47
9
Second round:
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5
Device Model: ST1000DM010-2EP102
Serial Number: ZN13L8EK
LU WWN Device Id: 5 000c50 0b4d48162
Firmware Version: CC43
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 22 13:45:46 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 058 006 Pre-fail Always - 106828336
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6965
5 Reallocated_Sector_Ct 0x0033 091 091 010 Pre-fail Always - 12144
7 Seek_Error_Rate 0x000f 067 060 045 Pre-fail Always - 17201279234
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9141
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4159
183 Runtime_Bad_Block 0x0032 094 094 000 Old_age Always - 6
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 072 072 000 Old_age Always - 28
188 Command_Timeout 0x0032 100 082 000 Old_age Always - 86 94 96
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 232
190 Airflow_Temperature_Cel 0x0022 061 047 040 Old_age Always - 39 (Min/Max 34/39)
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7060
194 Temperature_Celsius 0x0022 039 012 000 Old_age Always - 39 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 003 001 000 Old_age Always - 106828336
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7145h+48m+03.058s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11076604399
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14273246768
SMART Error Log Version: 1
ATA Error Count: 28 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:28.834 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:28.833 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:28.833 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:28.833 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:28.832 SET FEATURES [Set transfer mode]
Error 27 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:28.470 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:28.468 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:28.468 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:28.468 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:28.467 SET FEATURES [Set transfer mode]
Error 26 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:28.045 READ FPDMA QUEUED
60 00 08 20 06 29 4b 00 05:16:28.041 READ FPDMA QUEUED
60 00 08 18 06 29 4b 00 05:16:28.041 READ FPDMA QUEUED
60 00 08 10 06 29 4b 00 05:16:28.041 READ FPDMA QUEUED
60 00 08 08 06 29 4b 00 05:16:28.040 READ FPDMA QUEUED
Error 25 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:27.525 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:27.523 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:27.523 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:27.523 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:27.522 SET FEATURES [Set transfer mode]
Error 24 occurred at disk power-on lifetime: 9132 hours (380 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 03 29 0b Error: UNC at LBA = 0x0b2903c0 = 187237312
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 03 29 4b 00 05:16:27.160 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 05:16:27.159 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 05:16:27.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:16:27.159 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 05:16:27.159 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 9141 187237312
# 2 Short offline Completed: read failure 90% 9141 187237312
# 3 Short offline Completed without error 00% 3465 -
# 4 Short offline Completed without error 00% 3462 -
# 5 Short offline Completed without error 00% 2717 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
oren
22 February 2022 12:50
10
Thank you very much Andreas85. I will try that
oren
22 February 2022 12:52
11
Thank you megavolt:
This is what <mount -v> returns:
/dev/sdb1 on /run/media/oren/Backup type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
OK, so it all looks good to me, although I admit to not being an expert.
If you’ve got Windows there, boot into Windows and shutdown. But make 100% sure you don’t have quick shutdown (I think there’s something like that) or fastboot enabled. Also be sure not to hibernate.
See what happens then and report back.
1 Like
oren
22 February 2022 13:44
14
Eliminating Hibernate and fast startup in Windows fixed the problem.
Thank you Andreas 85, Mirdarthos and megavolt
oren
22 February 2022 13:46
15
Thank you again Mirdarthos. All is well after disabling hibernate and fast startup in Windows
1 Like
Arisa
22 February 2022 14:28
16
Just warning your disk seems to be on the way to die from what I see, It seems to be damaged by the smart data of course there can be errors in the smartdata itself but myself I wouldn’t use that disk anymore, of course it can kinda work another x of years but there is higher chance you will slowly lose data and one day bang and you won’t be able to read anything from it
1 Like
oren
22 February 2022 14:50
17
Woah! Thank you very much for pointing this out to me.
First, I will make sure to maintain a good backup plan.
Is there something I can do to monitor / prevent / delay this?
1 Like
Arisa
22 February 2022 15:08
18
I would probably recommend to setup some notification system so you see when the disk is reporting errors, something like this S.M.A.R.T. - ArchWiki
There is a tutorial how to make it show the problems as notification on desktop, if you need further help setting this up you can tell me I will try to write a list of commands you need to execute to make it work
Also you could run extended self-test which is long test that has way higher chance to show the problems with the disk but it also runs quite long time
“sudo smartctl --test long /dev/sda”
The short test does very little so it misses most of the stuff and even through it was a small test it showed read failure
# 1 Short offline Completed: read failure 90% 9141 187237312
oren
22 February 2022 15:24
19
Perfect! Thank you very much, Arisa!
1 Like
Arisa
22 February 2022 15:30
20
I am not sure if that was you but don’t mark my response as solution as it’s not a solution to the problem in title, I will set the Solution back to the original solution message from Mirdarthos , if you need further help I think best would be to create new thread so it’s kept as separate issues