Dear all,
First post here, I hope the problem is clear enough and we’ll find the issue.
I freshly installed Manjaro last week on my computer, with i3wm.
What happens:
It becomes very slow, the applications start to crash. Commands are not answering anymore (Run command, shortcut to start a new terminal etc.)
I can go to another tty but cannot log-in, it does not respond, gets very slow.
If a terminal is still open, no command answers, as the system answer it does not know the commands I type (unfound) even for reboot, journalctl, vim etc.
Overall my only issue is the hard reset.
When does it happen:
A few time while I use the computer, and often, almost always, after letting it on idle for a time, or in sleep, suspend mode.
It also happened a few times when plugging or unplugging the compiuter.
I really suspected the power manager for this reason.
Here is the output for my system info
System:
Kernel: 5.15.85-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=1bba5900-5dd8-4aa5-ba6f-165bae5fdfd5 rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: i3 v: 4.21.1 info: i3bar vt: 7 dm: LightDM v: 1.32.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Dell product: XPS 15 9510 v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Dell model: 01V4T3 v: A00 serial: <superuser required> UEFI: Dell
v: 1.15.2 date: 10/27/2022
Battery:
ID-1: BAT0 charge: 61.0 Wh (90.9%) condition: 67.1/84.3 Wh (79.6%)
volts: 12.6 min: 11.4 model: BYD DELL M59JH19 type: Li-poly serial: <filter>
status: N/A
Memory:
RAM: total: 62.53 GiB used: 4.12 GiB (6.6%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: 11th Gen Intel Core i7-11800H bits: 64 type: MT MCP
arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
process: Intel 10nm family: 6 model-id: 0x8D (141) stepping: 1
microcode: 0x42
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 640 KiB desc: d-8x48 KiB; i-8x32 KiB L2: 10 MiB desc: 8x1.2 MiB
L3: 24 MiB desc: 1x24 MiB
Speed (MHz): avg: 887 high: 1084 min/max: 800/4600 scaling:
driver: intel_pstate governor: powersave cores: 1: 1084 2: 949 3: 781 4: 801
5: 784 6: 886 7: 934 8: 800 9: 801 10: 991 11: 842 12: 938 13: 801 14: 1062
15: 964 16: 789 bogomips: 73744
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 avx512_bitalg avx512_vbmi2
avx512_vnni avx512_vp2intersect avx512_vpopcntdq avx512bw avx512cd
avx512dq avx512f avx512ifma avx512vbmi avx512vl bmi1 bmi2 bts cat_l2
cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16
cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
flush_l1d fma fpu fsgsbase fsrm fxsr gfni ht hwp hwp_act_window hwp_epp
hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida intel_pt invpcid
invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b
movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed
rdt_a rdtscp rep_good sdbg sep sha_ni smap smep split_lock_detect ss ssbd
sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_adjust tsc_deadline_timer tsc_known_freq umip vaes vme vmx vnmi
vpclmulqdq vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 status: Vulnerable: eIBRS with unprivileged eBPF
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel TigerLake-H GT1 [UHD Graphics] vendor: Dell driver: i915
v: kernel arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports:
active: eDP-1 empty: DP-1,DP-2,DP-3 bus-ID: 00:02.0 chip-ID: 8086:9a60
class-ID: 0300
Device-2: NVIDIA GA107M [GeForce RTX 3050 Ti Mobile] vendor: Dell
driver: nvidia v: 525.60.11 alternate: nouveau,nvidia_drm non-free: 525.xx+
status: current (as of 2022-12) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 8
link-max: lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:25a0 class-ID: 0302
Device-3: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo
bus-ID: 3-11:3 chip-ID: 0c45:6a11 class-ID: 0e02
Display: x11 server: X.Org v: 21.1.6 driver: X: loaded: modesetting,nvidia
unloaded: nouveau alternate: fbdev,nv,vesa dri: iris gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 2560x1600 s-dpi: 64 s-size: 1016x635mm (40.00x25.00")
s-diag: 1198mm (47.17")
Monitor-1: eDP-1 model: Sharp 0x14d0 built: 2020 res: 2560x1600 hz: 60
dpi: 194 gamma: 1.2 size: 336x210mm (13.23x8.27") diag: 396mm (15.6")
ratio: 16:10 modes: 3840x2400
API: OpenGL Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel Tiger Lake-H HD Audio vendor: Dell driver: snd_hda_intel
v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:43c8
class-ID: 0403
Sound API: ALSA v: k5.15.85-1-MANJARO running: yes
Sound Server-1: JACK v: 1.9.21 running: no
Sound Server-2: PulseAudio v: 16.1 running: yes
Sound Server-3: PipeWire v: 0.3.63 running: no
Network:
Device-1: Intel Tiger Lake PCH CNVi WiFi vendor: Rivet Networks
driver: iwlwifi v: kernel bus-ID: 00:14.3 chip-ID: 8086:43f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-14:4
chip-ID: 8087:0026 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 3.64 TiB used: 16.28 GiB (0.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 44.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung
model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 43.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 16.28 GiB (0.9%)
fs: ext4 dev: /dev/nvme1n1p2 maj-min: 259:7 label: N/A
uuid: 1bba5900-5dd8-4aa5-ba6f-165bae5fdfd5
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 332 KiB (0.1%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:6
label: NO_LABEL uuid: 84FA-BF9D
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:2 size: 100 MiB fs: vfat label: N/A
uuid: 8419-35D1
ID-2: /dev/nvme0n1p2 maj-min: 259:3 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:4 size: 1.82 TiB fs: ntfs label: N/A
uuid: 241A1AB31A1A824A
ID-4: /dev/nvme0n1p4 maj-min: 259:5 size: 829 MiB fs: ntfs label: N/A
uuid: C442E65342E649AE
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-10:2 info: Shenzhen Goodix USB2.0 MISC type: <vendor specific>
driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 27c6:63ac class-ID: ef00 serial: <filter>
Device-2: 3-11:3 info: Microdia Integrated_Webcam_HD type: Video
driver: uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 0c45:6a11 class-ID: 0e02
Device-3: 3-14:4 info: Intel AX201 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0026
class-ID: e001
Hub-4: 4-0:1 info: Super-speed hub ports: 6 rev: 3.1 speed: 20 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 348 Uptime: 19m wakeups: 4329 Init: systemd v: 252
default: graphical tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6
Packages: pm: pacman pkgs: 1234 libs: 347 tools: pamac,yay Shell: Zsh v: 5.9
running-in: terminator inxi: 3.3.24
And this is journalctl -b0 -p4 --no-pager
Jan 10 22:30:00 archline-XPS15 kernel: Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
Jan 10 22:30:00 archline-XPS15 kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Jan 10 22:30:00 archline-XPS15 kernel: pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid
Jan 10 22:30:00 archline-XPS15 kernel: pci 0000:00:07.3: DPC: RP PIO log size 0 is invalid
Jan 10 22:30:00 archline-XPS15 kernel: pnp 00:05: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
Jan 10 22:30:00 archline-XPS15 kernel: hpet_acpi_add: no address or irqs in _CRS
Jan 10 22:30:00 archline-XPS15 kernel: efifb: Ignoring BGRT: unexpected or invalid BMP data
Jan 10 22:30:00 archline-XPS15 kernel: nvme nvme0: missing or invalid SUBNQN field.
Jan 10 22:30:00 archline-XPS15 kernel: nvme nvme1: missing or invalid SUBNQN field.
Jan 10 22:30:00 archline-XPS15 kernel: i8042: Warning: Keylock active
Jan 10 22:30:00 archline-XPS15 kernel: usb: port power management may be unreliable
Jan 10 22:30:00 archline-XPS15 systemd-journald[385]: File /var/log/journal/d9222eef6532463081f9488842c20c49/system.journal corrupted or uncleanly shut down, renaming and replacing.
Jan 10 22:30:00 archline-XPS15 kernel: acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Jan 10 22:30:00 archline-XPS15 kernel: wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
Jan 10 22:30:00 archline-XPS15 kernel: acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Jan 10 22:30:00 archline-XPS15 kernel: acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Jan 10 22:30:00 archline-XPS15 kernel: acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Jan 10 22:30:00 archline-XPS15 kernel: acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Jan 10 22:30:00 archline-XPS15 kernel: acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Jan 10 22:30:00 archline-XPS15 kernel: acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
Jan 10 22:30:00 archline-XPS15 kernel: ioremap error for 0x63cc3000-0x63cc4000, requested 0x2, got 0x0
Jan 10 22:30:00 archline-XPS15 kernel: ucsi_acpi: probe of USBC000:00 failed with error -12
Jan 10 22:30:00 archline-XPS15 kernel: resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:05 [mem 0xfedc0000-0xfedc7fff]
Jan 10 22:30:00 archline-XPS15 kernel: caller tgl_uncore_imc_freerunning_init_box+0xba/0x110 [intel_uncore] mapping multiple BARs
Jan 10 22:30:00 archline-XPS15 kernel: iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
Jan 10 22:30:00 archline-XPS15 kernel: dell_smm_hwmon: unable to get SMM Dell signature
Jan 10 22:30:01 archline-XPS15 kernel: thermal thermal_zone11: failed to read out thermal zone (-61)
Jan 10 22:30:01 archline-XPS15 kernel: nvidia: loading out-of-tree module taints kernel.
Jan 10 22:30:01 archline-XPS15 kernel: nvidia: module license 'NVIDIA' taints kernel.
Jan 10 22:30:01 archline-XPS15 kernel: Disabling lock debugging due to kernel taint
Jan 10 22:30:01 archline-XPS15 kernel:
Jan 10 22:30:01 archline-XPS15 kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 525.60.11 Wed Nov 23 23:04:03 UTC 2022
Jan 10 22:30:02 archline-XPS15 kernel: nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
Jan 10 22:30:02 archline-XPS15 systemd[680]: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 755 ConfigurationDirectoryMode: 555)
Jan 10 22:30:02 archline-XPS15 bluetoothd[680]: profiles/audio/vcp.c:vcp_init() D-Bus experimental not enabled
Jan 10 22:30:02 archline-XPS15 bluetoothd[680]: src/plugin.c:plugin_init() Failed to init vcp plugin
Jan 10 22:30:02 archline-XPS15 bluetoothd[680]: profiles/audio/mcp.c:mcp_init() D-Bus experimental not enabled
Jan 10 22:30:02 archline-XPS15 bluetoothd[680]: src/plugin.c:plugin_init() Failed to init mcp plugin
Jan 10 22:30:02 archline-XPS15 bluetoothd[680]: profiles/audio/bap.c:bap_init() D-Bus experimental not enabled
Jan 10 22:30:02 archline-XPS15 bluetoothd[680]: src/plugin.c:plugin_init() Failed to init bap plugin
Jan 10 22:30:03 archline-XPS15 kernel: ACPI Warning: \_SB.NPCF._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210730/nsarguments-61)
Jan 10 22:30:03 archline-XPS15 kernel: ACPI Warning: \_SB.PC00.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210730/nsarguments-61)
Jan 10 22:30:05 archline-XPS15 kernel: kauditd_printk_skb: 189 callbacks suppressed
Jan 10 22:30:06 archline-XPS15 kernel: iwlwifi 0000:00:14.3: Unhandled alg: 0x3f0707
Jan 10 22:30:12 archline-XPS15 kernel: kauditd_printk_skb: 32 callbacks suppressed
Jan 10 22:30:20 archline-XPS15 lightdm[939]: gkr-pam: unable to locate daemon control file
Jan 10 22:30:20 archline-XPS15 systemd-journald[385]: File /var/log/journal/d9222eef6532463081f9488842c20c49/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
Jan 10 22:30:21 archline-XPS15 pulseaudio[988]: stat('/etc/pulse/default.pa.d'): No such file or directory
Jan 10 22:30:30 archline-XPS15 kernel: kauditd_printk_skb: 35 callbacks suppressed
I suspected something I run at the boot of the computer.
As my terminal (terminator) does not show transparent background, which it should, I run the line “picom -b -c”, which resolves the mentioned problem, but seems to randomly be linked with the cause.
If I remove it, the issue still happens, but way less frequently.
Here is a piece of my current config file:
# i3 config file (v4)
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
#Run boot:
exec --no-startup-id xrandr -s 2560x1600
exec --no-startup-id volumeicon
exec --no-startup-id nitrogen /usr/share/backgrounds/1228050.jpg --set-scaled
exec --no-startup-id xbacklight 1
#exec --no-startup-id picom -b -c
# Lock screen
bindsym $mod+9 exec --no-startup-id blurlock
# Autostart applications
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
#wallpaper at first: exec --no-startup-id nitrogen --restore; sleep 1; picom -b
exec --no-startup-id manjaro-hello
exec --no-startup-id nm-applet
exec --no-startup-id xfce4-power-manager
exec --no-startup-id pamac-tray
exec --no-startup-id clipit
# exec --no-startup-id blueman-applet
# exec_always --no-startup-id sbxkb
exec --no-startup-id start_conky_maia
# exec --no-startup-id start_conky_green
# exec --no-startup-id xautolock -time 10 -locker blurlock
exec_always --no-startup-id ff-theme-util
exec_always --no-startup-id fix_xcursor
}
I considered the issue to be linked with the drivers of the graphic cards, particularly as this bug also show weird colors on the screen, like greenish lines. I uninstalled all the pilots and installed back the xf86-vide-intel ones.
I also suspected the power management as it was at first related to the sleeping mode.
I read multiple articles and posts about it but nothing convincing.
Nothing works so far.
Related posts:
=> In my case it does not logs me out
=> Fresh install, tons of space available
Moderator edit: In the future, please use proper formatting: [HowTo] Post command output and file content as formatted text