Hello everyone!
I’m here to ask some advice since im not good with linux machines or coding anyways…
I succesfully installed macOS Catalina to Virtual Machine Manager just to have fun with it, but it have alot of graphics problems with Qemus VNC graphics so…
I Did what basicly every tutorial i watched says: enable iommu, etc…
So vnc server still works if im trying to use that, but if i try to boot my kvm with pci device (gtx 770, supported by macos catalina) it wont boot it just randomly lags and dont even say the virtual machine is running and basicly froze Manjaro…
Im getting this code from dmesg 
ello everyone!
I’m here to ask some advice since im not good with linux machines or coding anyways…
I succesfully installed macOS Catalina to Virtual Machine Manager just to have fun with it, but it have alot of graphics problems with Qemus VNC graphics so…
I Did what basicly every tutorial i watched says: enable iommu, etc…
So vnc server still works if im trying to use that, but if i try to boot my kvm with pci device (gtx 770, supported by macos catalina) it wont boot it just randomly lags and dont even say the virtual machine is running and basicly froze Manjaro…
Im getting this code from dmesg :
[ 0.035209] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.035210] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.035210] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.035210] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.035211] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.035211] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.035211] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.035212] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.035213] Booting paravirtualized kernel on bare hardware
[ 0.035214] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.088882] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.088991] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.088995] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.088996] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.089007] Built 1 zonelists, mobility grouping on. Total pages: 3858795
[ 0.089008] Policy zone: Normal
[ 0.089009] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64 root=UUID=8b304c9c-4edc-4889-a75c-59adef6bfa85 rw intel_iommu=on iommu=pt vfio-pci.ids=10de:0e0a,10de:1184
[ 0.089029] DMAR: IOMMU enabled
[ 0.089547] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.089801] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.089845] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[ 0.091918] Calgary: detecting Calgary via BIOS EBDA area
[ 0.091919] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.115091] Memory: 15169552K/15680300K available (12291K kernel code, 1328K rwdata, 4088K rodata, 1648K init, 3396K bss, 510748K reserved, 0K cma-reserved)
[ 0.115096] random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0
[ 0.115166] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.115173] Kernel/User page tables isolation: enabled
[ 0.115181] ftrace: allocating 37545 entries in 147 pages
[ 0.123465] rcu: Preemptible hierarchical RCU implementation.
[ 0.123465] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.123466] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.123466] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.123467] Tasks RCU enabled.
[ 0.123467] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.123468] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.124849] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.125139] Console: colour dummy device 80x25
[ 0.125142] printk: console [tty0] enabled
[ 0.125150] ACPI: Core revision 20190816
[ 0.125353] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.125417] APIC: Switch to symmetric I/O mode setup
[ 0.125418] DMAR: Host address width 39
[ 0.125418] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.125422] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.125422] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.125424] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.125425] DMAR: RMRR base: 0x0000003e28e000 end: 0x0000003e2adfff
[ 0.125425] DMAR: RMRR base: 0x0000003f800000 end: 0x0000007fffffff
[ 0.125426] DMAR: ANDD device: 1 name: _SB.PCI0.I2C0
[ 0.125426] DMAR: ANDD device: 2 name: _SB.PCI0.I2C1
[ 0.125426] DMAR: ANDD device: 9 name: _SB.PCI0.UA00
[ 0.125427] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.125427] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.125428] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.126851] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.126852] x2apic enabled
[ 0.126864] Switched APIC routing to cluster x2apic.
[ 0.131010] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.145431] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x73509d9fa88, max_idle_ns: 881590914879 ns
[ 0.145434] Calibrating delay loop (skipped), value calculated using timer frequency… 8003.30 BogoMIPS (lpj=13333280)
[ 0.145435] pid_max: default: 32768 minimum: 301
[ 0.148104] LSM: Security Framework initializing
[ 0.148106] Yama: becoming mindful.
[ 0.148133] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.148151] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.148158] *** VALIDATE tmpfs ***
[ 0.148235] *** VALIDATE proc ***
[ 0.148263] *** VALIDATE cgroup1 ***
[ 0.148264] *** VALIDATE cgroup2 ***
[ 0.148294] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.148306] process: using mwait in idle threads
[ 0.148308] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.148308] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.148310] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.148311] Spectre V2 : Mitigation: Full generic retpoline
[ 0.148312] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.148312] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.148313] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.148313] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.148314] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.148315] TAA: Mitigation: Clear CPU buffers
[ 0.148315] SRBDS: Vulnerable: No microcode
[ 0.148315] MDS: Mitigation: Clear CPU buffers
[ 0.148509] Freeing SMP alternatives memory: 32K
[ 0.149766] smpboot: CPU0: Intel(R) Core™ i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.168769] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.168773] … version: 4
[ 0.168773] … bit width: 48
[ 0.168773] … generic registers: 4
[ 0.168774] … value mask: 0000ffffffffffff
[ 0.168774] … max period: 00007fffffffffff
[ 0.168774] … fixed-purpose events: 3
[ 0.168774] … event mask: 000000070000000f
[ 0.175434] rcu: Hierarchical SRCU implementation.
[ 0.198857] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.205435] smp: Bringing up secondary CPUs …
[ 0.245440] x86: Booting SMP configuration:
[ 0.245440] … node #0, CPUs: #1 #2 #3 #4
[ 0.365776] MDS CPU bug present and SMT on, data leak possible. See MDS - Microarchitectural Data Sampling — The Linux Kernel documentation for more details.
[ 0.365776] TAA CPU bug present and SMT on, data leak possible. See TAA - TSX Asynchronous Abort — The Linux Kernel documentation for more details.
[ 0.405441] #5 #6 #7
[ 0.485705] smp: Brought up 1 node, 8 CPUs
[ 0.485705] smpboot: Max logical packages: 1
[ 0.485705] smpboot: Total of 8 processors activated (64025.40 BogoMIPS)
[ 0.487242] devtmpfs: initialized
[ 0.487242] x86/mm: Memory block size: 128MB
[ 0.487242] PM: Registering ACPI NVS region [mem 0x360e7000-0x360e7fff] (4096 bytes)
[ 0.487242] PM: Registering ACPI NVS region [mem 0x3e48e000-0x3eb33fff] (6971392 bytes)
[ 0.488803] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.488803] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.488818] pinctrl core: initialized pinctrl subsystem
[ 0.488944] PM: RTC time: 14:48:39, date: 2020-08-19
[ 0.488967] NET: Registered protocol family 16
[ 0.488967] audit: initializing netlink subsys (disabled)
[ 0.488967] audit: type=2000 audit(1597848519.363:1): state=initialized audit_enabled=0 res=1
[ 0.488967] cpuidle: using governor ladder
[ 0.488967] cpuidle: using governor menu
[ 0.488967] KVM setup pv remote TLB flush
[ 0.488967] ACPI FADT declares the system doesn’t support PCIe ASPM, so disable it
[ 0.488967] ACPI: bus type PCI registered
[ 0.488967] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.488967] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.488967] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.488967] PCI: Using configuration type 1 for base access
[ 0.489325] ENERGY_PERF_BIAS: Set to ‘normal’, was ‘performance’
[ 0.489326] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.489326] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.489326] ACPI: Added _OSI(Module Device)
[ 0.489326] ACPI: Added _OSI(Processor Device)
[ 0.489326] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489326] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.489326] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.489326] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.489326] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.513563] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.515558] ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored
[ 0.518141] ACPI: Dynamic OEM Table Load:
[ 0.518145] ACPI: SSDT 0xFFFF9DE92D0D2000 0007DD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.519190] ACPI: _PR.CPU0: _OSC native thermal LVT Acked
[ 0.520183] ACPI: Dynamic OEM Table Load:
[ 0.520185] ACPI: SSDT 0xFFFF9DE92CC47C00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.521063] ACPI: Dynamic OEM Table Load:
[ 0.521065] ACPI: SSDT 0xFFFF9DE92CC44200 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.522165] ACPI: Dynamic OEM Table Load:
[ 0.522167] ACPI: SSDT 0xFFFF9DE92D0D3800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.523312] ACPI: Dynamic OEM Table Load:
[ 0.523315] ACPI: SSDT 0xFFFF9DE92CC47000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.526901] ACPI: Interpreter enabled
[ 0.526923] ACPI: (supports S0 S3 S4 S5)
[ 0.526924] ACPI: Using IOAPIC for interrupt routing
[ 0.526947] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.527709] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.529413] ACPI: Power Resource [PG00] (on)
[ 0.529716] ACPI: Power Resource [PG01] (on)
[ 0.530014] ACPI: Power Resource [PG02] (on)
[ 0.531877] ACPI: Power Resource [WRST] (on)
[ 0.532118] ACPI: Power Resource [WRST] (on)
[ 0.532362] ACPI: Power Resource [WRST] (on)
[ 0.532604] ACPI: Power Resource [WRST] (on)
[ 0.532842] ACPI: Power Resource [WRST] (on)
[ 0.533080] ACPI: Power Resource [WRST] (on)
[ 0.533318] ACPI: Power Resource [WRST] (on)
[ 0.533563] ACPI: Power Resource [WRST] (on)
[ 0.533802] ACPI: Power Resource [WRST] (on)
[ 0.534045] ACPI: Power Resource [WRST] (on)
[ 0.534286] ACPI: Power Resource [WRST] (on)
[ 0.534524] ACPI: Power Resource [WRST] (on)
[ 0.534762] ACPI: Power Resource [WRST] (on)
[ 0.535000] ACPI: Power Resource [WRST] (on)
[ 0.535237] ACPI: Power Resource [WRST] (on)
[ 0.535475] ACPI: Power Resource [WRST] (on)
[ 0.535711] ACPI: Power Resource [WRST] (on)
[ 0.536610] ACPI: Power Resource [WRST] (on)
[ 0.536853] ACPI: Power Resource [WRST] (on)
[ 0.537095] ACPI: Power Resource [WRST] (on)
[ 0.545278] ACPI: Power Resource [FN00] (off)
[ 0.545341] ACPI: Power Resource [FN01] (off)
[ 0.545407] ACPI: Power Resource [FN02] (off)
[ 0.545471] ACPI: Power Resource [FN03] (off)
[ 0.545534] ACPI: Power Resource [FN04] (off)
[ 0.546408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.546412] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.546546] acpi PNP0A08:00: _OSC: platform does not support [PME AER]
[ 0.546674] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PCIeCapability LTR]
[ 0.546674] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.547278] PCI host bridge to bus 0000:00
[ 0.547279] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.547280] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.547281] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.547281] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.547282] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.547282] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.547289] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.547528] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.547559] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.547709] pci 0000:00:02.0: [8086:1912] type 00 class 0x038000
[ 0.547715] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.547717] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.547719] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.547841] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.547848] pci 0000:00:08.0: reg 0x10: [mem 0xdf332000-0xdf332fff 64bit]
[ 0.547971] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.547988] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[ 0.548039] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.548197] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.548213] pci 0000:00:14.2: reg 0x10: [mem 0xdf331000-0xdf331fff 64bit]
[ 0.548374] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[ 0.548417] pci 0000:00:15.0: reg 0x10: [mem 0xdf330000-0xdf330fff 64bit]
[ 0.548647] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[ 0.548691] pci 0000:00:15.1: reg 0x10: [mem 0xdf32f000-0xdf32ffff 64bit]
[ 0.548918] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.548932] pci 0000:00:16.0: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[ 0.548974] pci 0000:00:16.0: PME# supported from D3hot
[ 0.549105] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.549117] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[ 0.549122] pci 0000:00:17.0: reg 0x14: [mem 0xdf32d000-0xdf32d0ff]
[ 0.549128] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.549133] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.549138] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.549143] pci 0000:00:17.0: reg 0x24: [mem 0xdf32c000-0xdf32c7ff]
[ 0.549174] pci 0000:00:17.0: PME# supported from D3hot
[ 0.549297] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.549352] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.549362] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 0.549495] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[ 0.549550] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.549560] pci 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled
[ 0.549691] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[ 0.549746] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.549756] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 0.549893] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.549944] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.550080] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[ 0.550136] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 0.550145] pci 0000:00:1d.2: Intel SPT PCH root port ACS workaround enabled
[ 0.550277] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[ 0.550333] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 0.550342] pci 0000:00:1d.3: Intel SPT PCH root port ACS workaround enabled
[ 0.550508] pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
[ 0.550551] pci 0000:00:1e.0: reg 0x10: [mem 0xdf32b000-0xdf32bfff 64bit]
[ 0.550780] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[ 0.550976] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.550987] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[ 0.551123] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.551144] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[ 0.551164] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[ 0.551204] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.551361] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.551421] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[ 0.551490] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.551695] pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
[ 0.551711] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.551719] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.551726] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.551731] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.551737] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.551749] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.551805] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.551841] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[ 0.551853] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[ 0.551955] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[ 0.562112] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.562113] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.562114] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.562116] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.562164] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.562222] pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.562249] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf207fff 64bit]
[ 0.562295] pci 0000:03:00.0: enabling Extended Tags
[ 0.562362] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.562473] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.562476] pci 0000:00:1c.2: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.562530] pci 0000:04:00.0: [10de:1184] type 00 class 0x030000
[ 0.562551] pci 0000:04:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
[ 0.562560] pci 0000:04:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.562570] pci 0000:04:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.562576] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.562581] pci 0000:04:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
[ 0.562675] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:1c.4 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.562745] pci 0000:04:00.1: [10de:0e0a] type 00 class 0x040300
[ 0.562761] pci 0000:04:00.1: reg 0x10: [mem 0xdd080000-0xdd083fff]
[ 0.562887] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.562888] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.562890] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.562892] pci 0000:00:1c.4: bridge window [mem 0xc8000000-0xd1ffffff 64bit pref]
[ 0.562937] acpiphp: Slot [1] registered
[ 0.562940] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.563000] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060400
[ 0.563130] pci 0000:06:00.0: supports D1 D2
[ 0.563130] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.563223] pci 0000:00:1d.2: PCI bridge to [bus 06-07]
[ 0.563268] pci_bus 0000:07: extended config space not accessible
[ 0.563328] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.563404] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[ 0.563428] pci 0000:08:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.563450] pci 0000:08:00.0: reg 0x18: [mem 0xdf104000-0xdf104fff 64bit]
[ 0.563463] pci 0000:08:00.0: reg 0x20: [mem 0xdf100000-0xdf103fff 64bit]
[ 0.563548] pci 0000:08:00.0: supports D1 D2
[ 0.563549] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.563668] pci 0000:00:1d.3: PCI bridge to [bus 08]
[ 0.563670] pci 0000:00:1d.3: bridge window [io 0xc000-0xcfff]
[ 0.563671] pci 0000:00:1d.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.565977] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.566018] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.566060] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.566100] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.566139] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.566180] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.566221] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.566262] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.568767] iommu: Default domain type: Passthrough (set via kernel command line)
[ 0.568771] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.568772] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.568775] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.568775] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.568776] pci 0000:04:00.0: vgaarb: bridge control possible
[ 0.568776] vgaarb: loaded
[ 0.568844] ACPI: bus type USB registered
[ 0.568850] usbcore: registered new interface driver usbfs
[ 0.568853] usbcore: registered new interface driver hub
[ 0.568865] usbcore: registered new device driver usb
[ 0.568876] pps_core: LinuxPPS API ver. 1 registered
[ 0.568876] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.568877] PTP clock support registered
[ 0.568881] EDAC MC: Ver: 3.0.0
[ 0.568971] Registered efivars operations
[ 0.568971] PCI: Using ACPI for IRQ routing
[ 0.594882] PCI: pci_cache_line_size set to 64 bytes
[ 0.594994] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.594995] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.594995] e820: reserve RAM buffer [mem 0x360e7000-0x37ffffff]
[ 0.594995] e820: reserve RAM buffer [mem 0x38c1a000-0x3bffffff]
[ 0.594996] e820: reserve RAM buffer [mem 0x3c382000-0x3fffffff]
[ 0.594996] e820: reserve RAM buffer [mem 0x3dfc7000-0x3fffffff]
[ 0.594997] e820: reserve RAM buffer [mem 0x3e48e000-0x3fffffff]
[ 0.594997] e820: reserve RAM buffer [mem 0x3f400000-0x3fffffff]
[ 0.594998] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[ 0.595044] NetLabel: Initializing
[ 0.595044] NetLabel: domain hash size = 128
[ 0.595045] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.595053] NetLabel: unlabeled traffic allowed by default
[ 0.595777] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.595779] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.598770] clocksource: Switched to clocksource tsc-early
[ 0.604891] *** VALIDATE bpf ***
[ 0.604933] VFS: Disk quotas dquot_6.6.0
[ 0.604941] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.604956] *** VALIDATE ramfs ***
[ 0.604958] *** VALIDATE hugetlbfs ***
[ 0.604980] pnp: PnP ACPI init
[ 0.605228] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.605229] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.605230] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.605230] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.605233] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.605554] pnp 00:01: [dma 0 disabled]
[ 0.605647] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.605896] pnp 00:02: [dma 0 disabled]
[ 0.605919] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.606006] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.606007] system 00:03: [io 0xffff] has been reserved
[ 0.606007] system 00:03: [io 0xffff] has been reserved
[ 0.606008] system 00:03: [io 0xffff] has been reserved
[ 0.606009] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.606009] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.606011] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.606070] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.606072] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.606082] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.606108] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.606109] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.606281] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.606282] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.606282] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.606283] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.606283] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.606284] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.606285] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.606285] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.606286] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.606287] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.606288] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.606317] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.606317] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.606318] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.606319] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.606319] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.606320] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.606321] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.606517] system 00:09: [io 0xff00-0xfffe] has been reserved
[ 0.606519] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.607252] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.607927] pnp: PnP ACPI: found 11 devices
[ 0.608561] thermal_sys: Registered thermal governor ‘fair_share’
[ 0.608561] thermal_sys: Registered thermal governor ‘bang_bang’
[ 0.608562] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.608562] thermal_sys: Registered thermal governor ‘user_space’
[ 0.608562] thermal_sys: Registered thermal governor ‘power_allocator’
[ 0.613081] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.613099] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.613101] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.613102] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.613104] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.613106] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.613111] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.613113] pci 0000:00:1c.2: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.613117] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.613118] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.613120] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.613122] pci 0000:00:1c.4: bridge window [mem 0xc8000000-0xd1ffffff 64bit pref]
[ 0.613125] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.613130] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.613143] pci 0000:00:1d.2: PCI bridge to [bus 06-07]
[ 0.613148] pci 0000:00:1d.3: PCI bridge to [bus 08]
[ 0.613149] pci 0000:00:1d.3: bridge window [io 0xc000-0xcfff]
[ 0.613151] pci 0000:00:1d.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.613156] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.613156] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.613157] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.613157] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[ 0.613158] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.613158] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.613159] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.613159] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.613160] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.613161] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.613161] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdd0fffff]
[ 0.613162] pci_bus 0000:04: resource 2 [mem 0xc8000000-0xd1ffffff 64bit pref]
[ 0.613162] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.613163] pci_bus 0000:08: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.613273] NET: Registered protocol family 2
[ 0.613358] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.613405] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.613504] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.613562] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.613590] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.613613] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.613675] NET: Registered protocol family 1
[ 0.613678] NET: Registered protocol family 44
[ 0.613913] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.613921] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.614086] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[ 0.614092] PCI: CLS 64 bytes, default 64
[ 0.614115] Trying to unpack rootfs image as initramfs…
[ 0.689463] Freeing initrd memory: 12060K
[ 0.689493] DMAR: ACPI device “device:7a” under DMAR at fed91000 as 00:15.0
[ 0.689495] DMAR: ACPI device “device:7b” under DMAR at fed91000 as 00:15.1
[ 0.689496] DMAR: ACPI device “device:7c” under DMAR at fed91000 as 00:1e.0
[ 0.689504] DMAR: No ATSR found
[ 0.689534] DMAR: dmar0: Using Queued invalidation
[ 0.689536] DMAR: dmar1: Using Queued invalidation
[ 0.689794] pci 0000:00:00.0: Adding to iommu group 0
[ 0.689806] pci 0000:00:01.0: Adding to iommu group 1
[ 0.689812] pci 0000:00:02.0: Adding to iommu group 2
[ 0.689818] pci 0000:00:08.0: Adding to iommu group 3
[ 0.689829] pci 0000:00:14.0: Adding to iommu group 4
[ 0.689834] pci 0000:00:14.2: Adding to iommu group 4
[ 0.689845] pci 0000:00:15.0: Adding to iommu group 5
[ 0.689850] pci 0000:00:15.1: Adding to iommu group 5
[ 0.689858] pci 0000:00:16.0: Adding to iommu group 6
[ 0.689864] pci 0000:00:17.0: Adding to iommu group 7
[ 0.689871] pci 0000:00:1c.0: Adding to iommu group 8
[ 0.689879] pci 0000:00:1c.2: Adding to iommu group 9
[ 0.689886] pci 0000:00:1c.4: Adding to iommu group 10
[ 0.689899] pci 0000:00:1d.0: Adding to iommu group 11
[ 0.689906] pci 0000:00:1d.2: Adding to iommu group 12
[ 0.689914] pci 0000:00:1d.3: Adding to iommu group 13
[ 0.689922] pci 0000:00:1e.0: Adding to iommu group 14
[ 0.689937] pci 0000:00:1f.0: Adding to iommu group 15
[ 0.689944] pci 0000:00:1f.2: Adding to iommu group 15
[ 0.689950] pci 0000:00:1f.3: Adding to iommu group 15
[ 0.689956] pci 0000:00:1f.4: Adding to iommu group 15
[ 0.689961] pci 0000:01:00.0: Adding to iommu group 1
[ 0.689964] pci 0000:01:00.1: Adding to iommu group 1
[ 0.689973] pci 0000:03:00.0: Adding to iommu group 16
[ 0.689991] pci 0000:04:00.0: Adding to iommu group 17
[ 0.690004] pci 0000:04:00.1: Adding to iommu group 17
[ 0.690012] pci 0000:06:00.0: Adding to iommu group 18
[ 0.690054] pci 0000:06:00.0: Using iommu dma mapping
[ 0.690064] pci 0000:08:00.0: Adding to iommu group 19
[ 0.690138] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.691069] check: Scanning for low memory corruption every 60 seconds
[ 0.691271] Initialise system trusted keyrings
[ 0.691276] Key type blacklist registered
[ 0.691299] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.691919] zbud: loaded
[ 0.693761] Key type asymmetric registered
[ 0.693761] Asymmetric key parser ‘x509’ registered
[ 0.693765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.693787] io scheduler mq-deadline registered
[ 0.693787] io scheduler kyber registered
[ 0.693799] io scheduler bfq registered
[ 0.694584] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.694622] efifb: probing for efifb
[ 0.694631] efifb: framebuffer at 0xc1000000, using 3072k, total 3072k
[ 0.694632] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.694632] efifb: scrolling: redraw
[ 0.694633] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.694650] fbcon: Deferring console take-over
[ 0.694650] fb0: EFI VGA frame buffer device
[ 0.694654] intel_idle: MWAIT substates: 0x142120
[ 0.694654] intel_idle: v0.4.1 model 0x5E
[ 0.694830] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.694888] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.694899] ACPI: Sleep Button [SLPB]
[ 0.694914] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.694921] ACPI: Power Button [PWRB]
[ 0.694937] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.695479] ACPI: Power Button [PWRF]
[ 0.696850] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.697080] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.698120] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.698120] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.698222] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.698222] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.698352] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.719291] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.740284] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.740543] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel jroedel@suse.de
[ 0.740544] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.741022] usbcore: registered new interface driver usbserial_generic
[ 0.741024] usbserial: USB Serial support registered for generic
[ 0.741036] rtc_cmos 00:05: RTC can wake from S4
[ 0.741497] rtc_cmos 00:05: registered as rtc0
[ 0.741505] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.741530] intel_pstate: Intel P-state driver initializing
[ 0.741898] intel_pstate: HWP enabled
[ 0.741933] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.741961] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff]
[ 0.741963] caller pmc_core_probe+0x85/0x2e0 mapping multiple BARs
[ 0.741971] intel_pmc_core INT33A1:00: initialized
[ 0.742005] drop_monitor: Initializing network drop monitor service
[ 0.742088] NET: Registered protocol family 10
[ 0.745396] Segment Routing with IPv6
[ 0.745408] NET: Registered protocol family 17
[ 0.745666] RAS: Correctable Errors collector initialized.
[ 0.745685] microcode: sig=0x506e3, pf=0x2, revision=0xd6
[ 0.745750] microcode: Microcode Update Driver: v2.2.
[ 0.745752] IPI shorthand broadcast: enabled
[ 0.745755] sched_clock: Marking stable (745412926, 334867)->(747753622, -2005829)
[ 0.745832] registered taskstats version 1
[ 0.745836] Loading compiled-in X.509 certificates
[ 0.747347] Loaded X.509 cert ‘Build time autogenerated kernel key: a5f2859045e435d84cfe38aff4aa5e38a4a302cf’
[ 0.747366] zswap: loaded using pool lzo/zbud
[ 0.747447] Key type ._fscrypt registered
[ 0.747447] Key type .fscrypt registered
[ 0.749854] Key type big_key registered
[ 0.750863] PM: Magic number: 0:712:839
[ 0.751040] rtc_cmos 00:05: setting system clock to 2020-08-19T14:48:39 UTC (1597848519)
[ 0.751724] Freeing unused decrypted memory: 2040K
[ 0.751885] Freeing unused kernel image memory: 1648K
[ 0.775631] Write protecting the kernel read-only data: 18432k
[ 0.775993] Freeing unused kernel image memory: 2008K
[ 0.776019] Freeing unused kernel image memory: 8K
[ 0.781918] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.781918] x86/mm: Checking user space page tables
[ 0.788228] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.788228] Run /init as init process
[ 0.867796] fbcon: Taking over console
[ 0.867926] Console: switching to colour frame buffer device 128x48
[ 0.930530] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.930534] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.930780] SCSI subsystem initialized
[ 0.931592] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 0.931737] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.931885] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.931887] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.931888] usb usb1: Product: xHCI Host Controller
[ 0.931889] usb usb1: Manufacturer: Linux 5.4.52-1-MANJARO xhci-hcd
[ 0.931890] usb usb1: SerialNumber: 0000:00:14.0
[ 0.931967] hub 1-0:1.0: USB hub found
[ 0.931983] hub 1-0:1.0: 16 ports detected
[ 0.933522] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.933524] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.933527] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.933556] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.933557] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.933557] usb usb2: Product: xHCI Host Controller
[ 0.933558] usb usb2: Manufacturer: Linux 5.4.52-1-MANJARO xhci-hcd
[ 0.933558] usb usb2: SerialNumber: 0000:00:14.0
[ 0.933757] hub 2-0:1.0: USB hub found
[ 0.933771] hub 2-0:1.0: 10 ports detected
[ 0.934480] usb: port power management may be unreliable
[ 0.934811] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.934814] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.936651] libata version 3.00 loaded.
[ 0.938345] ahci 0000:00:17.0: version 3.0
[ 0.938510] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.938511] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.985983] scsi host0: ahci
[ 0.986104] scsi host1: ahci
[ 0.986170] scsi host2: ahci
[ 0.986243] scsi host3: ahci
[ 0.986293] scsi host4: ahci
[ 0.986349] scsi host5: ahci
[ 0.986381] ata1: SATA max UDMA/133 abar m2048@0xdf32c000 port 0xdf32c100 irq 130
[ 0.986382] ata2: SATA max UDMA/133 abar m2048@0xdf32c000 port 0xdf32c180 irq 130
[ 0.986384] ata3: SATA max UDMA/133 abar m2048@0xdf32c000 port 0xdf32c200 irq 130
[ 0.986386] ata4: SATA max UDMA/133 abar m2048@0xdf32c000 port 0xdf32c280 irq 130
[ 0.986388] ata5: SATA max UDMA/133 abar m2048@0xdf32c000 port 0xdf32c300 irq 130
[ 0.986390] ata6: SATA max UDMA/133 abar m2048@0xdf32c000 port 0xdf32c380 irq 130
[ 0.993792] xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
[ 0.993948] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.993948] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.993949] usb usb3: Product: xHCI Host Controller
[ 0.993950] usb usb3: Manufacturer: Linux 5.4.52-1-MANJARO xhci-hcd
[ 0.993950] usb usb3: SerialNumber: 0000:03:00.0
[ 0.994002] hub 3-0:1.0: USB hub found
[ 0.994007] hub 3-0:1.0: 2 ports detected
[ 0.994075] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.994077] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.994078] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.994098] usb usb4: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 0.994108] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.994109] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.994109] usb usb4: Product: xHCI Host Controller
[ 0.994110] usb usb4: Manufacturer: Linux 5.4.52-1-MANJARO xhci-hcd
[ 0.994110] usb usb4: SerialNumber: 0000:03:00.0
[ 0.994156] hub 4-0:1.0: USB hub found
[ 0.994160] hub 4-0:1.0: 2 ports detected
[ 1.262129] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 1.302621] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.302723] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.302841] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.302867] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.303705] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.303875] ACPI Error: Aborting method _SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.304262] ata2.00: ATA-9: CT250BX100SSD1, MU01, max UDMA/133
[ 1.304267] ata2.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 32), AA
[ 1.304969] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.305137] ACPI Error: Aborting method _SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.305735] ata2.00: configured for UDMA/133
[ 1.305931] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.306052] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.308912] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.309080] ACPI Error: Aborting method _SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.309241] ata3.00: ATAPI: TSSTcorp DVD-ROM SH-118CB, SB00, max UDMA/100
[ 1.323471] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.323639] ACPI Error: Aborting method _SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.323803] ata3.00: configured for UDMA/100
[ 1.387059] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.387227] ACPI Error: Aborting method _SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.387835] ata1.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
[ 1.387840] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.388545] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.388714] ACPI Error: Aborting method _SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.389277] ata1.00: configured for UDMA/133
[ 1.389658] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
[ 1.390503] scsi 1:0:0:0: Direct-Access ATA CT250BX100SSD1 MU01 PQ: 0 ANSI: 5
[ 1.396839] scsi 2:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-118CB SB00 PQ: 0 ANSI: 5
[ 1.403176] usb 1-2: New USB device found, idVendor=045e, idProduct=00f7, bcdDevice= 1.01
[ 1.403182] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.403185] usb 1-2: Product: USB camera
[ 1.459835] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.459836] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.459842] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.459846] sd 0:0:0:0: [sda] Write Protect is off
[ 1.459848] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.459850] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.459851] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.459863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.459864] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.487444] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.487831] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.515236] sda: sda1 sda2
[ 1.516643] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.525577] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 1.572396] sr 2:0:0:0: [sr0] scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 1.572398] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.596081] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.668243] usb 1-5: New USB device found, idVendor=1532, idProduct=011a, bcdDevice= 2.00
[ 1.668248] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.668252] usb 1-5: Product: Razer BlackWidow Ultimate
[ 1.668255] usb 1-5: Manufacturer: Razer
[ 1.676198] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.680321] usbcore: registered new interface driver usbhid
[ 1.680321] usbhid: USB HID core driver
[ 1.681266] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1532:011A.0001/input/input4
[ 1.698804] tsc: Refined TSC clocksource calibration: 4008.013 MHz
[ 1.698808] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5ed82f20, max_idle_ns: 440795221313 ns
[ 1.698830] clocksource: Switched to clocksource tsc
[ 1.735671] hid-generic 0003:1532:011A.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:14.0-5/input0
[ 1.736098] input: Razer Razer BlackWidow Ultimate Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1532:011A.0002/input/input5
[ 1.746861] random: fast init done
[ 1.792187] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[ 1.792324] input: Razer Razer BlackWidow Ultimate Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1532:011A.0002/input/input6
[ 1.792427] input: Razer Razer BlackWidow Ultimate System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1532:011A.0002/input/input7
[ 1.792519] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1532:011A.0002/input/input8
[ 1.792683] hid-generic 0003:1532:011A.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:14.0-5/input1
[ 1.793106] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:1532:011A.0003/input/input9
[ 1.793275] hid-generic 0003:1532:011A.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:14.0-5/input2
[ 1.934876] usb 1-6: New USB device found, idVendor=1532, idProduct=0037, bcdDevice= 2.00
[ 1.934882] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.934885] usb 1-6: Product: Razer DeathAdder 2013
[ 1.934888] usb 1-6: Manufacturer: Razer
[ 1.937991] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1532:0037.0004/input/input10
[ 1.938111] hid-generic 0003:1532:0037.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-6/input0
[ 1.940542] input: Razer Razer DeathAdder 2013 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1532:0037.0005/input/input11
[ 1.995636] input: Razer Razer DeathAdder 2013 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1532:0037.0005/input/input12
[ 1.995703] input: Razer Razer DeathAdder 2013 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1532:0037.0005/input/input13
[ 1.995761] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1532:0037.0005/input/input14
[ 1.995869] hid-generic 0003:1532:0037.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-6/input1
[ 1.997073] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:1532:0037.0006/input/input15
[ 2.052301] hid-generic 0003:1532:0037.0006: input,hidraw5: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-6/input2
[ 2.175512] usb 1-11: new low-speed USB device number 5 using xhci_hcd
[ 2.324585] usb 1-11: New USB device found, idVendor=046d, idProduct=c517, bcdDevice=38.20
[ 2.324586] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.324587] usb 1-11: Product: USB Receiver
[ 2.324600] usb 1-11: Manufacturer: Logitech
[ 2.328637] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:046D:C517.0007/input/input16
[ 2.382297] hid-generic 0003:046D:C517.0007: input,hidraw6: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-11/input0
[ 2.388050] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/input/input17
[ 2.388215] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/input/input18
[ 2.442291] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/input/input19
[ 2.442639] hid-generic 0003:046D:C517.0008: input,hiddev0,hidraw7: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-11/input1
[ 3.285909] EXT4-fs (sda2): 1 orphan inode deleted
[ 3.285912] EXT4-fs (sda2): recovery complete
[ 3.357930] random: crng init done
[ 3.532663] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.897682] systemd[1]: systemd 245.6-8-manjaro running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 4.912348] systemd[1]: Detected architecture x86-64.
[ 4.997023] systemd[1]: Set hostname to .
[ 7.427014] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 7.428429] systemd[1]: Created slice system-getty.slice.
[ 7.429222] systemd[1]: Created slice system-modprobe.slice.
[ 7.430201] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.430933] systemd[1]: Created slice User and Session Slice.
[ 7.431301] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.431656] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.432586] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.432891] systemd[1]: Reached target Local Encrypted Volumes.
[ 7.433093] systemd[1]: Reached target Login Prompts.
[ 7.433300] systemd[1]: Reached target Remote File Systems.
[ 7.433489] systemd[1]: Reached target Slices.
[ 7.433679] systemd[1]: Reached target Swap.
[ 7.434010] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.434506] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.435006] systemd[1]: Listening on LVM2 poll daemon socket.
[ 7.439669] systemd[1]: Listening on Process Core Dump Socket.
[ 7.440036] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.440672] systemd[1]: Listening on Journal Audit Socket.
[ 7.444449] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.447958] systemd[1]: Listening on Journal Socket.
[ 7.450443] systemd[1]: Listening on udev Control Socket.
[ 7.452722] systemd[1]: Listening on udev Kernel Socket.
[ 7.455592] systemd[1]: Mounting Huge Pages File System…
[ 7.458224] systemd[1]: Mounting POSIX Message Queue File System…
[ 7.460550] systemd[1]: Mounting Kernel Debug File System…
[ 7.462985] systemd[1]: Mounting Kernel Trace File System…
[ 7.500061] systemd[1]: Mounting Temporary Directory (/tmp)…
[ 7.501574] systemd[1]: Starting Create list of static device nodes for the current kernel…
[ 7.503032] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling…
[ 7.504530] systemd[1]: Starting Load Kernel Module drm…
[ 7.505370] systemd[1]: Condition check resulted in Load AppArmor profiles managed internally by snapd being skipped.
[ 7.571323] systemd[1]: Starting Set Up Additional Binary Formats…
[ 7.574198] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 7.578292] systemd[1]: Starting Journal Service…
[ 7.595839] systemd[1]: Starting Load Kernel Modules…
[ 7.596769] systemd[1]: Starting Remount Root and Kernel File Systems…
[ 7.597840] systemd[1]: Starting udev Coldplug all Devices…
[ 7.599029] systemd[1]: Mounted Huge Pages File System.
[ 7.599522] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.599987] systemd[1]: Mounted Kernel Debug File System.
[ 7.600433] systemd[1]: Mounted Kernel Trace File System.
[ 7.600861] systemd[1]: Mounted Temporary Directory (/tmp).
[ 7.601453] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 7.601910] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 280 (systemd-binfmt)
[ 7.602390] systemd[1]: Mounting Arbitrary Executable File Formats File System…
[ 7.603693] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 7.612297] systemd[1]: Finished Set Up Additional Binary Formats.
[ 7.626288] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.627033] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 7.627540] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 7.768070] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 7.768559] systemd[1]: Starting Load/Save Random Seed…
[ 7.769186] systemd[1]: Condition check resulted in Create System Users being skipped.
[ 7.769739] systemd[1]: Starting Create Static Device Nodes in /dev…
[ 7.770771] systemd[1]: modprobe@drm.service: Succeeded.
[ 7.771018] systemd[1]: Finished Load Kernel Module drm.
[ 7.804140] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.804185] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.804229] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 7.816375] systemd[1]: Finished udev Coldplug all Devices.
[ 7.816813] audit: type=1130 audit(1597848526.561:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-udev-trigger comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 7.839936] systemd[1]: Started Journal Service.
[ 7.840372] audit: type=1130 audit(1597848526.584:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-journald comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 7.873578] systemd-journald[281]: Received client request to flush runtime journal.
[ 7.896142] IPMI message handler: version 39.2
[ 7.981829] ipmi device interface
[ 8.274466] audit: type=1130 audit(1597848527.017:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-setup-dev comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 8.892681] systemd-journald[281]: File /var/log/journal/3792fcdf52134d84a3fa064d0cbf75b2/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 8.894282] audit: type=1130 audit(1597848527.641:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-random-seed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 9.793829] nvidia: loading out-of-tree module taints kernel.
[ 9.793834] nvidia: module license ‘NVIDIA’ taints kernel.
[ 9.793834] Disabling lock debugging due to kernel taint
[ 9.797820] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 9.803012] nvidia-nvlink: Nvlink Core is being initialized, major device number 241
[ 9.803364] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.903313] nvidia 0000:04:00.0: enabling device (0000 → 0003)
[ 9.903356] nvidia 0000:04:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 10.003326] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.100 Fri May 29 08:45:51 UTC 2020
[ 10.571003] Linux agpgart interface v0.103
[ 10.858413] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:14:04 UTC 2020
[ 10.875491] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 10.875497] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 10.875913] [drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[ 10.875918] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:04:00.0 on minor 1
[ 11.028092] audit: type=1130 audit(1597848529.771:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-modules-load comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 11.187627] audit: type=1130 audit(1597848529.931:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-udevd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 11.190414] audit: type=1130 audit(1597848529.934:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=lvm2-lvmetad comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 11.289468] audit: type=1130 audit(1597848530.034:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-sysctl comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 11.799093] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 11.874241] parport_pc 00:01: reported by Plug and Play ACPI
[ 11.874306] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 11.952352] input: PC Speaker as /devices/platform/pcspkr/input/input22
[ 11.984440] mei_me 0000:00:16.0: enabling device (0000 → 0002)
[ 12.069936] r8169 0000:08:00.0: can’t disable ASPM; OS doesn’t have ASPM control
[ 12.071824] intel-lpss 0000:00:15.0: enabling device (0000 → 0002)
[ 12.071993] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 12.076597] intel-lpss 0000:00:15.1: enabling device (0000 → 0002)
[ 12.076742] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 12.080056] libphy: r8169: probed
[ 12.080201] r8169 0000:08:00.0 eth0: RTL8168h/8111h, d8:cb:8a:c1:27:85, XID 541, IRQ 140
[ 12.080202] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 12.081297] intel-lpss 0000:00:1e.0: enabling device (0000 → 0002)
[ 12.081455] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 12.139253] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 12.139269] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 12.139270] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 12.139270] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 12.139271] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 12.239841] cryptd: max_cpu_qlen set to 1000
[ 12.239849] ppdev: user-space parallel port driver
[ 12.286720] i915 0000:00:02.0: enabling device (0000 → 0003)
[ 12.287477] i915 0000:00:02.0: VT-d active for gfx access
[ 12.287497] checking generic (c1000000 300000) vs hw (a0000000 10000000)
[ 12.287977] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.287978] [drm] Driver supports precise vblank timestamp query.
[ 12.288972] [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
[ 12.306181] iTCO_vendor_support: vendor-support=0
[ 12.307922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.308034] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 12.308124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.310747] pktcdvd: pktcdvd0: writer mapped to sr0
[ 12.385622] AVX2 version of gcm_enc/dec engaged.
[ 12.385623] AES CTR mode by8 optimization enabled
[ 12.407018] dw-apb-uart.2: ttyS2 at MMIO 0xdf32b000 (irq = 20, base_baud = 115200) is a 16550A
[ 12.450583] r8169 0000:08:00.0 enp8s0: renamed from eth0
[ 12.563369] [drm] failed to retrieve link info, disabling eDP
[ 12.565718] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 2
[ 12.577230] [drm] Cannot find any crtc or sizes
[ 12.588187] [drm] Cannot find any crtc or sizes
[ 12.599590] [drm] Cannot find any crtc or sizes
[ 12.607230] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[ 12.718679] snd_hda_intel 0000:00:1f.3: enabling device (0000 → 0002)
[ 12.719020] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.719458] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 12.719468] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 12.719646] snd_hda_intel 0000:04:00.1: enabling device (0000 → 0002)
[ 12.719739] snd_hda_intel 0000:04:00.1: Disabling MSI
[ 12.719748] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[ 12.873957] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 12.873960] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.873963] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.873965] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.873966] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.873968] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 12.873971] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 12.873972] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 12.903492] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 12.903520] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 12.903545] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 12.903569] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 12.903592] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 12.903615] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 12.903638] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 12.903661] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 12.903683] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 12.903714] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 13.294490] intel_rapl_common: Found RAPL domain package
[ 13.294494] intel_rapl_common: Found RAPL domain core
[ 13.294497] intel_rapl_common: Found RAPL domain uncore
[ 13.294500] intel_rapl_common: Found RAPL domain dram
[ 13.350078] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card2/input33
[ 13.350262] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card2/input34
[ 13.350427] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card2/input35
[ 13.350534] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card2/input36
[ 13.433375] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input37
[ 13.433625] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input38
[ 13.433840] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input39
[ 13.434028] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input40
[ 14.029372] audit: type=1130 audit(1597848532.774:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-journal-flush comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 14.904151] audit: type=1130 audit(1597848533.647:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=lvm2-monitor comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 15.105018] audit: type=1130 audit(1597848533.847:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-fsck@dev-disk-by\x2duuid-30EE\x2dC55E comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 15.463671] audit: type=1130 audit(1597848534.207:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-setup comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 15.498474] audit: type=1127 audit(1597848534.244:14): pid=561 uid=0 auid=4294967295 ses=4294967295 msg=’ comm=“systemd-update-utmp” exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success’
[ 15.542283] audit: type=1130 audit(1597848534.287:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-update-utmp comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 15.819114] mousedev: PS/2 mouse device common for all mice
[ 15.883385] mc: Linux media interface: v0.10
[ 15.903675] audit: type=1130 audit(1597848534.651:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-timesyncd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 15.963923] logitech-djreceiver 0003:046D:C517.0007: hidraw6: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-11/input0
[ 15.972961] videodev: Linux video capture interface: v2.00
[ 16.033448] audit: type=1130 audit(1597848534.777:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=cronie comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 16.041095] audit: type=1130 audit(1597848534.784:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=dbus comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 16.087367] gspca_main: v2.14.0 registered
[ 16.182773] logitech-djreceiver 0003:046D:C517.0008: hiddev0,hidraw7: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-11/input1
[ 16.248845] gspca_main: sonixj-2.14.0 probing 045e:00f7
[ 16.249175] input: sonixj as /devices/pci0000:00/0000:00:14.0/usb1/1-2/input/input41
[ 16.249795] usbcore: registered new interface driver sonixj
[ 16.251858] logitech-djreceiver 0003:046D:C517.0008: device of type 27 Mhz (0x02) connected on slot 1
[ 16.252008] input: Logitech Wireless Mouse PID:0085 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/0003:046D:0085.0009/input/input42
[ 16.252073] hid-generic 0003:046D:0085.0009: input,hidraw8: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:0085] on usb-0000:00:14.0-11/input1:1
[ 16.259859] logitech-djreceiver 0003:046D:C517.0008: device of type 27 Mhz (0x02) connected on slot 3
[ 16.260098] input: Logitech Wireless Keyboard PID:0068 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/0003:046D:0068.000A/input/input46
[ 16.260234] input: Logitech Wireless Keyboard PID:0068 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/0003:046D:0068.000A/input/input47
[ 16.260278] input: Logitech Wireless Keyboard PID:0068 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/0003:046D:0068.000A/input/input48
[ 16.260323] hid-generic 0003:046D:0068.000A: input,hidraw9: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:0068] on usb-0000:00:14.0-11/input1:3
[ 16.363874] logitech-hidpp-device 0003:046D:0085.0009: HID++ 1.0 device connected.
[ 16.428015] input: Logitech Wireless Mouse PID:0085 as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/0003:046D:0085.0009/input/input52
[ 16.428092] logitech-hidpp-device 0003:046D:0085.0009: input,hidraw8: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:0085] on usb-0000:00:14.0-11/input1:1
[ 16.579728] usbcore: registered new interface driver snd-usb-audio
[ 16.707960] logitech-hidpp-device 0003:046D:0068.000A: HID++ 1.0 device connected.
[ 16.757102] input: Logitech Wireless Keyboard PID:0068 as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C517.0008/0003:046D:0068.000A/input/input53
[ 16.757685] logitech-hidpp-device 0003:046D:0068.000A: input,hidraw9: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:0068] on usb-0000:00:14.0-11/input1:3
[ 17.566056] ahci 0000:00:17.0: port does not support device sleep
[ 18.333412] audit: type=1130 audit(1597848537.077:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=linux-module-cleanup comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 19.659166] kauditd_printk_skb: 4 callbacks suppressed
[ 19.659169] audit: type=1130 audit(1597848538.404:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=NetworkManager comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 19.698707] audit: type=1130 audit(1597848538.444:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=libvirtd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 19.733167] audit: type=1130 audit(1597848538.477:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-user-sessions comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 19.734352] audit: type=1130 audit(1597848538.477:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=sddm comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 20.060341] audit: type=1130 audit(1597848538.804:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 20.814668] audit: type=1130 audit(1597848539.557:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=NetworkManager-dispatcher comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 21.326457] audit: type=1130 audit(1597848540.071:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=polkit comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 21.441260] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[ 21.546594] r8169 0000:08:00.0 enp8s0: Link is Down
[ 22.206335] loop: module loaded
[ 22.262219] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 22.307576] audit: type=1130 audit(1597848541.051:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=ModemManager comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 22.986399] audit: type=1130 audit(1597848541.731:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=snapd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 23.490774] audit: type=1130 audit(1597848542.234:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=tlp comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 23.537800] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 23.646609] tun: Universal TUN/TAP device driver, 1.6
[ 23.648234] virbr0: port 1(virbr0-nic) entered blocking state
[ 23.648239] virbr0: port 1(virbr0-nic) entered disabled state
[ 23.648385] device virbr0-nic entered promiscuous mode
[ 24.662858] kauditd_printk_skb: 9 callbacks suppressed
[ 24.662861] audit: type=1325 audit(1597848543.407:43): table=filter family=2 entries=10
[ 24.668163] audit: type=1325 audit(1597848543.411:44): table=filter family=2 entries=12
[ 24.673420] audit: type=1325 audit(1597848543.417:45): table=filter family=2 entries=13
[ 24.678713] audit: type=1325 audit(1597848543.421:46): table=filter family=2 entries=15
[ 24.683976] audit: type=1325 audit(1597848543.427:47): table=filter family=2 entries=16
[ 24.689423] audit: type=1325 audit(1597848543.434:48): table=filter family=2 entries=18
[ 24.694614] audit: type=1325 audit(1597848543.437:49): table=nat family=2 entries=5
[ 24.699941] audit: type=1325 audit(1597848543.444:50): table=nat family=2 entries=7
[ 24.705117] audit: type=1325 audit(1597848543.447:51): table=mangle family=2 entries=6
[ 24.710499] audit: type=1325 audit(1597848543.454:52): table=mangle family=2 entries=8
[ 25.145225] virbr0: port 1(virbr0-nic) entered blocking state
[ 25.145230] virbr0: port 1(virbr0-nic) entered listening state
[ 25.373628] virbr0: port 1(virbr0-nic) entered disabled state
[ 25.796638] r8169 0000:08:00.0 enp8s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 25.796645] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[ 28.028888] nvidia 0000:01:00.0: DMAR: 32bit DMA uses non-identity mapping
[ 28.383440] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and L1TF - L1 Terminal Fault — The Linux Kernel documentation for details.
[ 28.476538] ACPI Warning: _SB.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[ 28.731768] nvidia 0000:04:00.0: DMAR: 32bit DMA uses non-identity mapping
[ 31.008167] kauditd_printk_skb: 38 callbacks suppressed
[ 31.008170] audit: type=1131 audit(1597848549.751:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=NetworkManager-dispatcher comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 31.817943] audit: type=1100 audit(1597848550.564:92): pid=1173 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:authentication grantors=pam_permit acct=“sddm” exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success’
[ 31.817989] audit: type=1101 audit(1597848550.564:93): pid=1173 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:accounting grantors=pam_permit acct=“sddm” exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success’
[ 31.830593] audit: type=1103 audit(1597848550.574:94): pid=1173 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=pam_permit acct=“sddm” exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success’
[ 31.911323] audit: type=1130 audit(1597848550.654:95): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@967 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 31.927796] audit: type=1101 audit(1597848550.671:96): pid=1176 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct=“sddm” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 31.927839] audit: type=1103 audit(1597848550.671:97): pid=1176 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=? acct=“sddm” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed’
[ 31.927872] audit: type=1006 audit(1597848550.671:98): pid=1176 uid=0 old-auid=4294967295 auid=967 tty=(none) old-ses=4294967295 ses=1 res=1
[ 31.953766] audit: type=1105 audit(1597848550.701:99): pid=1176 uid=0 auid=967 ses=1 msg=‘op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct=“sddm” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 32.468360] audit: type=1130 audit(1597848551.211:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user@967 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 39.473648] kauditd_printk_skb: 1 callbacks suppressed
[ 39.473660] audit: type=1130 audit(1597848558.217:102): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=udisks2 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 40.048670] audit: type=1130 audit(1597848558.791:103): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=upower comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 50.095441] audit: type=1131 audit(1597848568.837:104): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 53.153296] audit: type=1100 audit(1597848571.939:105): pid=1236 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:authentication grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct=“tomi” exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success’
[ 53.228219] audit: type=1101 audit(1597848572.016:106): pid=1236 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct=“tomi” exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success’
[ 53.229336] audit: type=1103 audit(1597848572.016:107): pid=1236 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct=“tomi” exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success’
[ 53.229623] audit: type=1006 audit(1597848572.016:108): pid=1236 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 53.267139] audit: type=1130 audit(1597848572.057:109): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@1000 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 53.270719] audit: type=1101 audit(1597848572.060:110): pid=1238 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct=“tomi” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 53.270798] audit: type=1103 audit(1597848572.060:111): pid=1238 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=? acct=“tomi” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed’
[ 53.270898] audit: type=1006 audit(1597848572.060:112): pid=1238 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 53.271547] audit: type=1105 audit(1597848572.060:113): pid=1238 uid=0 auid=1000 ses=3 msg=‘op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct=“tomi” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 53.802965] systemd-journald[281]: File /var/log/journal/3792fcdf52134d84a3fa064d0cbf75b2/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 54.525229] fuse: init (API version 7.31)
[ 54.525342] *** VALIDATE fuse ***
[ 54.525350] *** VALIDATE fuse ***
[ 64.520365] kauditd_printk_skb: 4 callbacks suppressed
[ 64.520366] audit: type=1131 audit(1597848583.374:118): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user@967 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 64.528010] audit: type=1131 audit(1597848583.384:119): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@967 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 66.029734] audit: type=1130 audit(1597848584.887:120): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=rtkit-daemon comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 91.005796] kauditd_printk_skb: 4 callbacks suppressed
[ 91.005798] audit: type=1130 audit(1597848609.879:121): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=pamac-daemon comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 91.008900] audit: type=1131 audit(1597848609.883:122): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=pamac-daemon comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 142.863208] audit: type=1131 audit(1597848661.736:123): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=libvirtd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 911.878103] audit: type=1130 audit(1597849430.750:124): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-clean comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 911.878112] audit: type=1131 audit(1597849430.750:125): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-clean comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
[ 1458.986484] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[ 1459.127995] usb 1-3: New USB device found, idVendor=2a70, idProduct=f003, bcdDevice= 4.04
[ 1459.127997] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1459.127998] usb 1-3: Product: OnePlus
[ 1459.127999] usb 1-3: Manufacturer: OnePlus
[ 1459.128000] usb 1-3: SerialNumber: 54d15e2
[ 1459.960771] usb-storage 1-3:1.1: USB Mass Storage device detected
[ 1459.961131] scsi host6: usb-storage 1-3:1.1
[ 1459.961281] usbcore: registered new interface driver usb-storage
[ 1459.977662] usbcore: registered new interface driver uas
[ 1460.970933] scsi 6:0:0:0: CD-ROM OnePlus Device Driver 0404 PQ: 0 ANSI: 2
[ 1460.971882] sr 6:0:0:0: Power-on or device reset occurred
[ 1460.972772] sr 6:0:0:0: [sr1] scsi-1 drive
[ 1460.993912] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 1460.994204] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 1461.053497] pktcdvd: pktcdvd1: writer mapped to sr1
[ 1461.067832] pktcdvd: pktcdvd1: pkt_get_last_written failed
[ 1461.085625] pktcdvd: pktcdvd1: pkt_get_last_written failed
[ 1463.269179] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1463.281641] ISOFS: changing to secondary root
[ 1474.650493] usb 1-3: USB disconnect, device number 6
[ 1474.661451] pktcdvd: pktcdvd1: writer unmapped
[ 1474.973686] usb 1-3: new high-speed USB device number 7 using xhci_hcd
[ 1475.116701] usb 1-3: New USB device found, idVendor=2a70, idProduct=f003, bcdDevice= 4.04
[ 1475.116702] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1475.116702] usb 1-3: Product: OnePlus
[ 1475.116703] usb 1-3: Manufacturer: OnePlus
[ 1475.116703] usb 1-3: SerialNumber: 54d15e2
[ 1475.330407] usb-storage 1-3:1.1: USB Mass Storage device detected
[ 1475.330595] scsi host6: usb-storage 1-3:1.1
[ 1476.358226] scsi 6:0:0:0: CD-ROM OnePlus Device Driver 0404 PQ: 0 ANSI: 2
[ 1476.360229] sr 6:0:0:0: Power-on or device reset occurred
[ 1476.361893] sr 6:0:0:0: [sr1] scsi-1 drive
[ 1476.397332] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 1476.397431] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 1476.439589] pktcdvd: pktcdvd1: writer mapped to sr1
[ 1476.445771] pktcdvd: pktcdvd1: pkt_get_last_written failed
[ 1476.452654] pktcdvd: pktcdvd1: pkt_get_last_written failed
[ 1478.438063] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1478.438713] ISOFS: changing to secondary root
[tomi@tomi-ms7971 ~]$
And when i boot linux i have these errors:
I think it’s because of the iommu or because i deleted some line from grub maybe?
GRUB_DEFAULT=saved
GRUB_TIMEOUT=10
GRUB_TIMEOUT_STYLE=hidden
GRUB_DISTRIBUTOR=“Manjaro”
GRUB_CMDLINE_LINUX_DEFAULT=“intel_iommu=on iommu=pt vfio-pci.ids=10de:0e0a,10de:1184”
GRUB_CMDLINE_LINUX=""
I don’t remember exactly what i removed but it were on Ǵrub_cmdline_linux_default
My setup:
i7-6700k
2x8GB
GTX 1060 (6gb main gpu)
gtx 770 (passtrough gpu)
256GB Windows
2TB (linux partition+ntfs partition)
And i have tested my pc in windows 10 it works.
I have display adapter from main gpu to my main 4k monitor and hdmi+dvi from gtx 770 to display 2 and 3