Problema con Transcode

Hola , buen día, en verdad tengo problemas para instalar transcode ya sea desde la Terminal o desde el instalador gráfico, siempre me da error.
Alguna solución a esto?,es de mucha importacia este software? , estimo que si, ya que no puedo utilizar Clam Tk(antivirus) , sujeto probablemente a transcode .
Muchas gracias !!! :grinning:

System:
  Kernel: 6.7.0-0-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.7-x86_64
    root=UUID=0fb091fc-3271-483e-818a-5dc21ccbd08d rw quiet apparmor=1
    security=apparmor resume=UUID=e4ab7b14-ec9e-4155-b5eb-28717df67c17
    udev.log_priority=3
  Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.12 info: frameworks
    v: 5.113.0 wm: kwin_x11 tools: xscreensaver,xscreensaver-systemd vt: 2
    dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Dell product: Latitude 3420 v: N/A
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Dell model: 0KMD3M v: A00 serial: <superuser required> part-nu: 0A7B
    uuid: <superuser required> UEFI: Dell v: 1.3.1 date: 04/23/2021
Battery:
  ID-1: BAT0 charge: 26.7 Wh (65.4%) condition: 40.8/40.8 Wh (100.0%)
    volts: 11.2 min: 11.2 model: SMP DELL MGCM514 type: Li-poly serial: <filter>
    status: discharging
  Device-1: hidpp_battery_0 model: Logitech M350 Wireless Mouse
    serial: <filter> charge: 50% (should be ignored) rechargeable: yes
    status: N/A
Memory:
  System RAM: total: 12 GiB available: 11.43 GiB used: 4.45 GiB (38.9%)
  Message: For most reliable report, use superuser + dmidecode.
  Array-1: capacity: 32 GiB slots: 2 modules: 2 EC: None
    max-module-size: 16 GiB note: est.
  Device-1: DIMM 1 type: DDR4 detail: synchronous size: 8 GiB
    speed: 3200 MT/s volts: curr: 1 width (bits): data: 64 total: 64
    manufacturer: 0198000080AD part-no: 9905700-053.A00G serial: <filter>
  Device-2: DIMM 2 type: DDR4 detail: synchronous size: 4 GiB
    speed: 3200 MT/s volts: curr: 1 width (bits): data: 64 total: 64
    manufacturer: 01980000802C part-no: KCDT82-MIE serial: <filter>
CPU:
  Info: model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP
    arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
    process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xB4
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB L3: 8 MiB
    desc: 1x8 MiB
  Speed (MHz): avg: 400 min/max: 400/4200 scaling: driver: intel_pstate
    governor: powersave cores: 1: 400 2: 400 3: 400 4: 400 5: 400 6: 400 7: 400
    8: 400 bogomips: 22120
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 avx512_bitalg avx512_vbmi2
    avx512_vnni avx512_vp2intersect avx512_vpopcntdq avx512bw avx512cd
    avx512dq avx512f avx512ifma avx512vbmi avx512vl bmi1 bmi2 bts cat_l2
    cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16
    cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
    flush_l1d fma fpu fsgsbase fsrm fxsr gfni ht hwp hwp_act_window hwp_epp
    hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt ida intel_pt invpcid
    lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b movdiri msr mtrr
    nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
    pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed rdt_a rdtscp rep_good
    sdbg sep sha_ni smap smep split_lock_detect ss ssbd sse sse2 sse4_1 sse4_2
    ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer
    tsc_known_freq umip user_shstk vaes vme vmx vnmi vpclmulqdq vpid x2apic
    xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional,
    RSB filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: Dell driver: i915
    v: kernel arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports:
    active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:9a49
    class-ID: 0300
  Device-2: Microdia Integrated_Webcam_HD driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-6:3 chip-ID: 0c45:6d1a
    class-ID: 0e02
  Display: x11 server: X.Org v: 21.1.10 compositor: kwin_x11 driver: X:
    loaded: modesetting alternate: fbdev,vesa dri: iris gpu: i915 display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
    s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model: BOE Display 0x07e8 built: 2019 res: 1366x768 hz: 60
    dpi: 112 gamma: 1.2 size: 309x173mm (12.17x6.81") diag: 354mm (13.9")
    ratio: 16:9 modes: 1366x768
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast surfaceless: drv: iris x11: drv: iris
    inactive: gbm,wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 23.3.3-manjaro1.1
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel Xe Graphics (TGL GT2)
    device-ID: 8086:9a49 memory: 11.17 GiB unified: yes
  API: Vulkan v: 1.3.274 layers: 4 device: 0 type: integrated-gpu name: Intel
    Xe Graphics (TGL GT2) driver: mesa intel v: 23.3.3-manjaro1.1
    device-ID: 8086:9a49 surfaces: xcb,xlib
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: Dell
    driver: sof-audio-pci-intel-tgl
    alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 00:1f.3
    chip-ID: 8086:a0c8 class-ID: 0401
  API: ALSA v: k6.7.0-0-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
    status: active 2: pipewire-media-session status: active
    tools: pactl,pw-cat,pw-cli
Network:
  Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel bus-ID: 00:14.3
    chip-ID: 8086:a0f0 class-ID: 0280
  IF: wlp0s20f3 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Dell driver: r8169 v: kernel pcie: speed: Unknown lanes: 63 link-max:
    gen: 6 speed: 64 GT/s port: 3000 bus-ID: 2c:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp44s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 8087:0026
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.36 TiB used: 64.13 GiB (4.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNVS500G
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: EDFK0N01 temp: 32.9 C
    scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ04ABF100
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 5400 serial: <filter> fw-rev: 01 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 78.12 GiB size: 76.35 GiB (97.73%) used: 35.57 GiB (46.6%)
    fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
    uuid: 0fb091fc-3271-483e-818a-5dc21ccbd08d
  ID-2: /boot/efi raw-size: 301 MiB size: 300.4 MiB (99.79%)
    used: 312 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
    label: NO_LABEL uuid: 1C6D-8153
  ID-3: /home raw-size: 381.48 GiB size: 374.43 GiB (98.15%)
    used: 28.56 GiB (7.6%) fs: ext4 dev: /dev/nvme0n1p4 maj-min: 259:4 label: N/A
    uuid: ae4fdda7-02c7-4b07-847d-0ca5d01636a3
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
    compressor: zstd max-pool: 20%
  ID-1: swap-1 type: partition size: 5.86 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A
    uuid: e4ab7b14-ec9e-4155-b5eb-28717df67c17
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 1000 MiB fs: vfat label: N/A
    uuid: 7616-A725
  ID-2: /dev/sda2 maj-min: 8:2 size: 921.73 GiB fs: ext4 label: endeavouros
    uuid: c5836b3c-5bb7-4d47-8d49-56202845d398
  ID-3: /dev/sda3 maj-min: 8:3 size: 8.8 GiB fs: swap label: swap
    uuid: 0a93cecb-4ed9-4925-aff6-72849d60ff7e
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-4:2 info: Logitech Unifying Receiver type: mouse,HID
    driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
    chip-ID: 046d:c52f class-ID: 0300
  Device-2: 3-6:3 info: Microdia Integrated_Webcam_HD type: video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 500mA chip-ID: 0c45:6d1a class-ID: 0e02
  Device-3: 3-10:4 info: Intel AX201 Bluetooth type: bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 100mA chip-ID: 8087:0026 class-ID: e001
  Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 30.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 272 Power: uptime: 1h 19m states: freeze,mem,disk suspend: s2idle
    wakeups: 0 hibernate: platform avail: shutdown,reboot,suspend,test_resume
    image: 4.56 GiB daemons: upowerd,org_kde_powerdevil Init: systemd v: 255
    default: graphical tool: systemctl
  Packages: 1524 pm: pacman pkgs: 1507 libs: 439 tools: pamac,yay pm: flatpak
    pkgs: 17 Compilers: clang: 16.0.6 gcc: 13.2.1 Shell: Zsh v: 5.9 default: Bash
    v: 5.2.21 running-in: konsole inxi: 3.3.32
    ~     

please copy/paste this text and run it through the google translator

Copie/pegue este texto y ejecútelo en el traductor de Google.

You did not say what the error was.

transcode is a software only available through the AUR
To be able to even install it, you need to have some programs installed.
Namely: all the packages in the base-devel package group.

You would likely be well served with the program “handbrake” - which is a GUI with much of the same functionality.

Thank you very much for the information, I’ve tried many time to install it, but it always gave me a message “an error occurred,it can’t be install” or somenthing like this.
Where can i get Handbrake?.
Thank you again

Instalando numactl (2.0.16-1)…
Instalando handbrake (1.7.2-1)…
Ejecutando postransacción hooks…
Arming ConditionNeedsUpdate…
Refreshing PackageKit…
Updating icon theme caches…
Updating the desktop file MIME type cache…

Preparando transcode…
==> Creando el paquete: transcode 1.1.7-43 (mar 13 feb 2024 08:19:58)
==> Comprobando dependencias mientras se ejecuta…
==> Comprobando dependencias mientras se compila…
==> Recibiendo las fuentes…
→ transcode-1.1.7.tar.bz2 ha sido encontrado
→ transcode-imagemagick7.patch ha sido encontrado
→ transcode-gcc10.patch ha sido encontrado
→ transcode-glibc-2.32.patch ha sido encontrado
==> Validando los archivos source con b2sums…
transcode-1.1.7.tar.bz2 … Aprobado
transcode-imagemagick7.patch … Aprobado
transcode-gcc10.patch … Aprobado
transcode-glibc-2.32.patch … Aprobado
==> Eliminando el directorio $srcdir/…
==> Extrayendo las fuentes…
→ Extrayendo transcode-1.1.7.tar.bz2 con bsdtar
==> Iniciando prepare()…
/var/tmp/pamac-build-juliogl/transcode/PKGBUILD: línea 55: patch: orden no encontrada
==> ERROR: Se produjo un fallo en prepare().
Cancelando…

I’ve installed Hanbrake an what I copied on top is the result of of this software :woozy_face:

please actually read - and act accordingly

/var/tmp/pamac-build-juliogl/transcode/PKGBUILD: línea 55: patch: orden no encontrada

One of those programs is “patch” - and it is missing and causing this error.

you just installed it
you already have it

Instalando handbrake (1.7.2-1)…
Ejecutando postransacción hooks…
Arming ConditionNeedsUpdate…
Refreshing PackageKit…
Updating icon theme caches…
Updating the desktop file MIME type cache…

re:

Refreshing PackageKit…

You should use pacman or pamac.

Hola GuilleManja, ¿para qué necesitas Transcode?. No lo veo en las dependencias de ClamAV o de ClamTK.
Aviso que es un paquete que está en los repositorios AUR, así que lo más probable es que en este foro te digan que Manjaro no soporta AUR y que no ofrecen soporte para AUR.
Echa un ojo a la descripción del paquete aquí, para que valores si lo necesitas o no: https://www.linuxfromscratch.org/blfs/view/svn/multimedia/transcode.html

Hola, sólo por curiosidad probé de instalar transcode desde pamac, y compiló sin problemas.
Yo tampoco veo que sea necesario para clam.
Pero handbrake es un reemplazo (para transcode) más amigable, en todo sentido.

Hola Pilaga, si instalé Handbrake desde pamac y anda bien.
Voy a instalar transcode desde pamac , solo para probar.
Muchas gracias :smiley:

Okey ,muchas gracias