Problem with additional monitor

Hi. I have a fresh installation of Manjaro 21.2.1 on my laptop. The system works fine (as far as I have started using it). Unfortunately, when I connect the monitor via HDMI it seems to get no signal and goes blank (as if nothing is connected to it). When I try to make it active in “Display and monitor → Display Configuration” (it’s on the list) then when I check “Enabled” and try to apply it nothing happens.
When I close this window and re-enter here (Display Configuration) I have the default situation - that is, I can select a second monitor and there is no Enabled option active (that is, my setting does not save).

I’ve started trying to find a solution to similar problems, but these are my first steps with the architecture of this system and I’m still a little lost. I’ve switched video-hybrid-amd-nvidia-prime to video-hybrid-amd-nvidia-470xx-prime but my situation was not changed so I’ve backed to original driver.
I would appreciate some direction on what might be wrong.

I’ve hybrid laptop (AMD CPU - Nvidia GPU).

mhwd -li                                                                                                                                                                          ✔ 
> Installed PCI configs:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
video-hybrid-amd-nvidia-prime            2021.12.18               false            PCI
           video-linux            2018.05.04                true            PCI


Warning: No installed USB configs!

lspci -vnn | grep VGA                                                                                                                                                             ✔ 
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation TU117M [10de:1f99] (rev a1) (prog-if 00 [VGA controller])
06:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Renoir [1002:1636] (rev c6) (prog-if 00 [VGA controller])


This is my xrandr output:

eDP connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
   1920x1080     60.01*+
   1680x1050     60.01  
   1280x1024     60.01  
   1440x900      60.01  
   1280x800      60.01  
   1280x720      60.01  
   1024x768      60.01  
   800x600       60.01  
   640x480       60.01  
HDMI-1-0 connected (normal left inverted right x axis y axis)
   1920x1080     60.00 +  59.94    50.00  
   1600x900      60.00  
   1280x1024     75.02    60.02  
   1280x720      60.00    59.94    50.00  
   1152x864      75.00  
   1024x768      75.03    60.00  
   800x600       75.00    60.32  
   720x576       50.00  
   720x480       59.94  
   640x480       75.00    59.94    59.93  

grep "connected\|disconnected" /var/log/Xorg.0.log                                                                                                                                ✔ 
[     6.660] (II) AMDGPU(0): Output eDP connected
[     6.750] (--) NVIDIA(GPU-0): DELL P2419HC (DFP-0): connected
[    23.223] (--) NVIDIA(GPU-0): DELL P2419HC (DFP-0): connected
[    23.645] (--) NVIDIA(GPU-0): DELL P2419HC (DFP-0): connected
[   351.668] (--) NVIDIA(GPU-0): DELL P2419HC (DFP-0): connected

This is my inxi output:

  Kernel: 5.15.12-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
    root=UUID=8cb70986-018e-480d-a503-f3be5311b0fe rw quiet apparmor=1
    security=apparmor resume=UUID=b07b18cd-58a5-4466-8944-0149b4b4a8f3
    udev.log_priority=3
  Desktop: KDE Plasma 5.23.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: LENOVO product: 82EY v: IdeaPad Gaming 3 15ARH05
    serial: <superuser required> Chassis: type: 10 v: IdeaPad Gaming 3 15ARH05
    serial: <superuser required>
  Mobo: LENOVO model: LNVNB161216 v: NO DPK serial: <superuser required>
    UEFI: LENOVO v: FCCN13WW date: 06/29/2020
Battery:
  ID-1: BAT0 charge: 38.7 Wh (94.6%) condition: 40.9/45.0 Wh (90.9%)
    volts: 12.7 min: 11.4 model: SMP L19M3PF7 type: Li-poly serial: <filter>
    status: N/A cycles: 35
Memory:
  RAM: total: 15.07 GiB used: 2.53 GiB (16.8%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 7 4800H with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen 2 family: 0x17 (23) model-id: 0x60 (96) stepping: 1
    microcode: 0x8600104
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 8 MiB
    desc: 2x4 MiB
  Speed (MHz): avg: 1396 high: 1398 min/max: 1400/2900 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1397 2: 1397
    3: 1397 4: 1397 5: 1395 6: 1397 7: 1397 8: 1397 9: 1397 10: 1397 11: 1396
    12: 1397 13: 1396 14: 1398 15: 1397 16: 1397 bogomips: 92662
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
    f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs
    irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
    msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
    pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
    pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
    rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1
    sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc
    tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
    wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
    IBRS_FW, STIBP: conditional, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA TU117M vendor: Lenovo driver: nvidia v: 495.44
    alternate: nouveau,nvidia_drm bus-ID: 01:00.0 chip-ID: 10de:1f99
    class-ID: 0300
  Device-2: AMD Renoir vendor: Lenovo driver: amdgpu v: kernel
    bus-ID: 06:00.0 chip-ID: 1002:1636 class-ID: 0300
  Device-3: IMC Networks Integrated Camera type: USB driver: uvcvideo
    bus-ID: 1-3:3 chip-ID: 13d3:56ff class-ID: 0e02
  Display: x11 server: X.org 1.21.1.2 compositor: kwin_x11 driver:
    loaded: amdgpu,ati,nvidia unloaded: modesetting,nouveau
    alternate: fbdev,nv,vesa resolution: <missing: xdpyinfo>
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: NVIDIA vendor: Lenovo driver: snd_hda_intel v: kernel
    bus-ID: 01:00.1 chip-ID: 10de:10fa class-ID: 0403
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
    vendor: Lenovo driver: N/A
    alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x bus-ID: 06:00.5
    chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound Server-1: ALSA v: k5.15.12-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.19 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.42 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Lenovo driver: r8169 v: kernel port: 3000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
    vendor: Lenovo driver: rtw_8822ce v: N/A modules: rtw88_8822ce port: 2000
    bus-ID: 04:00.0 chip-ID: 10ec:c822 class-ID: 0280
  IF: wlp4s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
    bus-ID: 3-3:3 chip-ID: 0bda:c123 class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 2 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.38 TiB used: 35.08 GiB (2.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW512G8L
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: C04C temp: 40.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Western Digital
    model: WDS100T2B0C-00PXH0 size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 233010WD temp: 32.9 C scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 90 GiB size: 88.03 GiB (97.81%) used: 11.92 GiB (13.5%)
    fs: ext4 dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A
    uuid: 8cb70986-018e-480d-a503-f3be5311b0fe
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
    used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
    label: NO_LABEL uuid: C5A4-A872
  ID-3: /home raw-size: 378.43 GiB size: 371.43 GiB (98.15%)
    used: 23.16 GiB (6.2%) fs: ext4 dev: /dev/nvme0n1p4 maj-min: 259:4
    label: N/A uuid: 531dfe06-3c85-4597-a014-529719ce7dd1
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
    uuid: b07b18cd-58a5-4466-8944-0149b4b4a8f3
Unmounted:
  ID-1: /dev/nvme1n1p1 maj-min: 259:6 size: 931.51 GiB fs: ext4 label: N/A
    uuid: 0ed89920-08f8-40ad-a71e-a56a77fee95b
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-2:2 info: Logitech Keyboard K120 type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s
    power: 90mA chip-ID: 046d:c31c class-ID: 0300
  Device-2: 1-3:3 info: IMC Networks Integrated Camera type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 13d3:56ff class-ID: 0e02
  Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-2:2 info: Logitech M105 Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
    power: 100mA chip-ID: 046d:c077 class-ID: 0301
  Device-2: 3-3:3 info: Realtek Bluetooth Radio type: Bluetooth
    driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA
    chip-ID: 0bda:c123 class-ID: e001 serial: <filter>
  Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 43.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 330 Uptime: 15m wakeups: 1 Init: systemd v: 250 tool: systemctl
  Compilers: gcc: 11.1.0 clang: 13.0.0 Packages: 1249 pacman: 1246 lib: 339
  flatpak: 0 snap: 3 Shell: Zsh v: 5.8 default: Bash v: 5.1.12
  running-in: konsole inxi: 3.3.11

I have just started to have similar problems, I can see the display in “display settings” but it is blank and the display reports no signal.

Wonder if this is related to an NVIDIA driver update?? EDIT - Just noticed you have AMD so not just an Nvidia issue…