Problem mounting Nas (NFS) with systemd

[anon33601770]

@imarco

cat/ etc/exports for fun

"/share/CACHEDEV3_DATA/2025" *(sec=sys,ro,async,wdelay,insecure,no_subtree_check,no_root_squash,fsid=6df85fabd2d2e22f1c0a11db77c70c54) 
"/share/NFSv=4" *(no_subtree_check,no_root_squash,insecure,fsid=0)
"/share/NFSv=4/2025" *(sec=sys,ro,async,wdelay,insecure,nohide,no_subtree_check,no_root_squash,fsid=695f34686a1ad4d50954d85e39fd87de) 
"/share/CACHEDEV2_DATA/data" *(sec=sys,ro,async,wdelay,insecure,no_subtree_check,no_root_squash,fsid=0cb39b8b317885e5d00391102ed08814) 
"/share/NFSv=4/data" *(sec=sys,ro,async,wdelay,insecure,nohide,no_subtree_check,no_root_squash,fsid=585029da10f92b9451591c81d602a879) 
"/share/CACHEDEV1_DATA/Multimedia" *(sec=sys,ro,async,wdelay,insecure,no_subtree_check,no_root_squash,fsid=33172f1e47c9173a0e9d13ed82b65885) 
"/share/NFSv=4/Multimedia" *(sec=sys,ro,async,wdelay,insecure,nohide,no_subtree_check,no_root_squash,fsid=5cf5da4a710f9ba0617d9972518432f3) 

It works.

But as you can see:
you have exported all of these as “ro” → read only

… the server says: you may look at it, but not change anything, essentially
no matter what the permissions on your mountpoint are

---

actually: not all
not this one:

@imarco

"/share/NFSv=4" *(no_subtree_check,no_root_squash,insecure,fsid=0)

---

sshfs would perhaps have been easier?
but you are almost there, I think

[imarco]

It was in my qnap administration page: it was on read only; i change it and it’s ok!

Thanks again!