Printer not printing via Ethernet

First of all my sincere thanks to this great community! … letting my computers survive October’s grub-upgrade just by thorough reading prior to re-boot.

But the perceived aftermaths still sent me into sort of a temporary panic: The printer had lost its ability to print completely, not even via USB (which had been my workaround for quite some while) and its web-I/F (for status check and configuration) was no longer accessible.

… until I temporarily replaced the LAN-switch for a new one. (The old one didn’t show any change, the new one has LEDs for each of its channels.)

What I don’t understand: once that the web-I/F became accessible, printing via USB became possible again.

2-3 years ago there had been an issue with the printer: the ‘driver’ (the kpdl-file got lost and none for this old(?) model is contained in Gnome’s(?) database any more. With this forum’s help I was able to extract one from the AUR. But was not able to print via Ethernet any more. Since connecting it to the Desktop’s USB offered a viable workaround, I didn’t pursue the issue after some while of struggling. But sure, I cannot print from the Notebook that way.

Now I want to resurrect printing via LAN.

The first installations (several years ago) had been quite simple in the Gnome Settings: just click Add Printer and let it search. When I do this now, it will only find the pre-configured ‘Kyocera ECOSYS-P5021cdn@usb’.
… and one without the usb-suffix, which wouldn’t receive any data, which not even wakes up the Printer from sleep mode.

I think it’s rather an Avahi issue, anyway (some miss-configuration?).

And here's the typically required system's info (although I fear it doesn't help a lot with this issue):
[tn@23ed538 ~]$ sudo inxi -zv8
System:
  Kernel: 6.6.158-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 16.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
    root=UUID=d25d1a9b-c6a7-48d7-a710-98f6ca1bb234 rw quiet splash
    udev.log_priority=3
  Desktop: GNOME v: 50.5 tk: GTK v: 3.24.52 wm: gnome-shell
    tools: gsd-screensaver-proxy dm: GDM v: 50.3 Distro: Manjaro
    base: Arch Linux
Machine:
  Type: Desktop System: FUJITSU product: ESPRIMO D538 v: N/A serial: <filter>
    Chassis: type: 3 serial: <filter>
  Mobo: FUJITSU model: D3600-A1 v: S26361-D3600-A1 serial: <filter>
    uuid: 6f8988e7-b758-11e9-93e8-4c5262a25182 Firmware: UEFI vendor: FUJITSU
    // American Megatrends v: 5.0.0.13 R1.21.0 for D3600-A1x date: 07/04/2019
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 32 GiB available: 30.2 GiB used: 16.36 GiB (54.2%)
    igpu: 1024 MiB
  Array-1: capacity: 64 GiB slots: 4 modules: 2 EC: None
    max-module-size: 16 GiB note: est.
  Device-1: DIMM CHA1 type: DDR4 detail: synchronous size: 16 GiB speed:
    spec: 3200 MT/s actual: 2400 MT/s volts: curr: 1.2 width (bits): data: 64
    total: 64 manufacturer: Crucial part-no: CP16G4DFRA32A.C8FF
    serial: <filter>
  Device-2: DIMM CHB2 type: DDR4 detail: synchronous size: 16 GiB speed:
    spec: 3200 MT/s actual: 2400 MT/s volts: curr: 1.2 min: 1.2 max: 1.2
    width (bits): data: 64 total: 64 manufacturer: Crucial
    part-no: CP16G4DFRA32A.C8FF serial: <filter>
PCI Slots:
  Slot: 0 type: PCIe status: available length: short volts: 3.3
    bus-ID: 00:1c.6
  Slot: 1 type: PCIe status: unknown length: long volts: 3.3 bus-ID: ff:1c.5
  Slot: 2 type: PCIe status: unknown length: long volts: 3.3 bus-ID: ff:01.0
CPU:
  Info: model: Intel Pentium Gold G5600 socket: LGA1151 bits: 64 type: MT MCP
    arch: Coffee Lake level: v2 built: 2018 process: Intel 14nm family: 6
    model-id: 0x9E (158) stepping: 0xB (11) microcode: 0xF6
  Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 threads: 4 tpc: 2
    smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB
    desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1248 min/max: 800/3900 base/boost: 2574/8300 scaling:
    driver: intel_pstate governor: powersave volts: 1.0 V ext-clock: 100 MHz
    cores: 1: 1248 2: 1248 3: 1248 4: 1248 bogomips: 31211
  Flags: 3dnowprefetch abm acpi aes aperfmperf apic arat arch_capabilities
    arch_perfmon art bts clflush clflushopt cmov constant_tsc cpuid
    cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
    flexpriority flush_l1d fpu fsgsbase fxsr ht hwp hwp_act_window hwp_epp
    hwp_notify ibpb ibpb_exit_to_user ibrs intel_pt invpcid lahf_lm lm mca
    mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
    pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
    rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
    sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
    tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
    xsaves xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
    vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional;
    RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
  Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630]
    vendor: Fujitsu Solutions driver: i915 v: kernel arch: Gen-9.5
    process: Intel 14nm built: 2016-20 ports: active: DP-1,HDMI-A-1
    empty: DP-2, DP-3, HDMI-A-2, HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:3e91
    class-ID: 0300
  Device-2: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-7.4:14
    chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Display: unspecified server: X.Org v: 24.1.13 with: Xwayland v: 24.1.13
    compositor: gnome-shell driver: gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.00x11.22")
    s-diag: 1055mm (41.54") monitors: <missing: xrandr>
  Monitor-1: DP-1 model: Samsung LS27D40xG serial: <filter> built: 2026
    res: 1920x1080 dpi: 82 gamma: 1.2 chroma: red: x: 0.655 y: 0.337 green:
    x: 0.333 y: 0.600 blue: x: 0.149 y: 0.055 white: x: 0.314 y: 0.329
    size: 598x337mm (23.54x13.27") diag: 686mm (27") ratio: 16:9
    modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800,
    1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480,
    640x480, 720x400
  Monitor-2: HDMI-A-1 model: Samsung S27D390 serial: <filter> built: 2015
    res: 1920x1080 dpi: 82 gamma: 1.2 chroma: red: x: 0.647 y: 0.337 green:
    x: 0.329 y: 0.616 blue: x: 0.145 y: 0.055 white: x: 0.314 y: 0.329
    size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9
    modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800,
    1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480,
    640x480, 720x400
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris x11: drv: iris
    inactive: wayland
  API: OpenGL v: 4.6 vendor: intel mesa v: 26.2.4-arch1.1 glx-v: 1.4
    direct-render: yes renderer: Mesa Intel UHD Graphics 630 (CFL GT2)
    device-ID: 8086:3e91 memory: 29.5 GiB unified: yes
  Info: Tools: api: eglinfo,glxinfo x11: xdpyinfo,xprop
Audio:
  Device-1: Intel 300/C240 Series Family HD Audio vendor: Fujitsu Solutions
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
    bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
  Device-2: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-7.4:14
    chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  API: ALSA v: k6.6.158-1-MANJARO status: kernel-api tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.6.9 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Fujitsu Solutions driver: r8169 v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 01:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp1s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
  WAN IP: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
    v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-6:3
    chip-ID: 0a12:0001 class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.0
    lmp-v: 9 status: discoverable: no pairing: no class-ID: 7c0104
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 2.79 TiB used: 528.24 GiB (18.5%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT1000P3SSD8
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: P9CR30A temp: 25.9 C
    scheme: GPT
  SMART: yes health: PASSED on: 2y 56d 5h cycles: 1,204
    read-units: 10,810,669 [5.53 TB] written-units: 192,103,260 [98.3 TB]
  ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
    model: WD20EFRX-68EUZN0 family: Red (CMR) size: 1.82 TiB block-size:
    physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s tech: HDD
    rpm: 5400 serial: <filter> fw-rev: 0A82 temp: 34 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 5y 261d 23h cycles: 2911
  ID-3: /dev/sdb maj-min: 8:16 vendor: SanDisk model: Ultra Fit
    size: 57.84 GiB block-size: physical: 512 B logical: 512 B type: USB
    rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
    fw-rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 93.13 GiB size: 91.11 GiB (97.83%) used: 29.92 GiB (32.8%)
    fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p3 maj-min: 259:3
    label: cme1t.manjaro_g uuid: d25d1a9b-c6a7-48d7-a710-98f6ca1bb234
  ID-2: /boot/efi raw-size: 954 MiB size: 952.1 MiB (99.80%)
    used: 5.5 MiB (0.6%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: CME1T_EFI uuid: 4A16-8340
  ID-3: /home raw-size: 93.13 GiB size: 91.11 GiB (97.83%)
    used: 6.81 GiB (7.5%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p5
    maj-min: 259:5 label: cme1t.mg_home
    uuid: 98bd367d-22a4-4028-906e-2f5ae44f1f17
  ID-4: /mnt/bkp raw-size: 931.32 GiB size: 915.64 GiB (98.32%)
    used: 307.88 GiB (33.6%) fs: ext4 block-size: 4096 B dev: /dev/sda1
    maj-min: 8:1 label: wd2t.bkp uuid: 46399e9f-c924-418b-b49e-fd610ab96b4f
  ID-5: /mnt/data raw-size: 372.72 GiB size: 365.81 GiB (98.15%)
    used: 173.47 GiB (47.4%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p7
    maj-min: 259:7 label: cme1t.data
    uuid: 75b32bf9-4850-4499-94d6-cb737cc173d9
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
    compressor: zstd max-pool: 20%
  ID-1: swap-1 type: partition size: 36.32 GiB used: 10.16 GiB (28.0%)
    priority: -2 dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
    uuid: 8a3d6405-5b6b-4989-9631-0d94e08239f5
Unmounted:
  ID-1: /dev/nvme0n1p4 maj-min: 259:4 size: 93.13 GiB fs: ext4
    label: cme1t.manjaro_k uuid: d82e7bbf-2581-4d11-91fa-5cf19f5efb6d
  ID-2: /dev/nvme0n1p6 maj-min: 259:6 size: 93.13 GiB fs: ext4
    label: cme1t.mk_home uuid: f66763f4-5866-4c31-9e2a-793571ac5adb
  ID-3: /dev/nvme0n1p8 maj-min: 259:8 size: 18.63 GiB fs: ext4
    label: cme1t.mg_test uuid: db10dd45-b09e-4aa9-8e5a-c9169aad751d
  ID-4: /dev/nvme0n1p9 maj-min: 259:9 size: 18.63 GiB fs: ext4
    label: cme1t.mgt_home uuid: 3f28027a-6fc9-4a3e-9e23-38c4bbdae08c
  ID-5: /dev/sda2 maj-min: 8:2 size: 372.9 GiB fs: ext4 label: wd2t.backup
    uuid: d13f645b-d2ee-4af6-9ae7-ed84a4355e2e
  ID-6: /dev/sda3 maj-min: 8:3 size: 1024 KiB fs: ext4 label: wd2t.dummy
    uuid: 1d8df0e9-6028-42e1-8c69-da2e78aba055
  ID-7: /dev/sda5 maj-min: 8:5 size: 558.79 GiB fs: ext4 label: wd2t.bkp.old
    uuid: 0ccc4358-5553-49be-a2d5-62fcce9e24d9
  ID-8: /dev/sdb1 maj-min: 8:17 size: 57.84 GiB fs: ext4 label: Transporter
    uuid: 6b52de8e-1520-4301-baa8-263317452d48
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-1:24 info: HS6209 2.4G Wireless Receiver type: keyboard,mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 100mA chip-ID: 32c2:0012 class-ID: 0301
  Device-2: 1-2:39 info: INSTANT USB GAMING MOUSE type: mouse,keyboard
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 30fa:1040 class-ID: 0300
  Device-3: 1-6:3 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
    type: bluetooth driver: btusb interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 0a12:0001 class-ID: e001
  Hub-2: 1-7:4 info: Genesys Logic Hub ports: 4 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
    chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 1-7.1:13 info: SanDisk Ultra Fit type: mass storage
    driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 224mA chip-ID: 0781:5583 class-ID: 0806
    serial: <filter>
  Device-2: 1-7.2:12 info: SHARKOON GmbH [Mediatrack Edge Mini Keyboard]
    type: keyboard,mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 1ea7:0066 class-ID: 0301
  Device-3: 1-7.3:38 info: Kyocera ECOSYS P5021cdn type: printer
    driver: usblp interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 2mA chip-ID: 0482:06ad class-ID: 0701 serial: <filter>
  Device-4: 1-7.4:14 info: Logitech Webcam C310 type: video,audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 36.0 C pch: 45.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 0 pm: pacman pkgs: 1789 libs: 437
    tools: gnome-software,pamac,yay
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://mirror.alwyzon.net/manjaro/stable/$repo/$arch
    2: https://mirror.komelt.dev/manjaro/stable/$repo/$arch
    3: https://ftp.tu-chemnitz.de/pub/linux/manjaro/stable/$repo/$arch
    4: https://mirror.vinehost.net/manjaro/stable/$repo/$arch
    5: https://mirror.raiolanetworks.com/manjaro/stable/$repo/$arch
    6: https://mirror.it4i.cz/manjaro/stable/$repo/$arch
    7: https://mirror.ourhost.az/manjaro/stable/$repo/$arch
Processes:
  CPU top: 5 of 303
  1: cpu: 15.9% command: firefox pid: 10701 mem: 2842.9 MiB (9.1%)
  2: cpu: 14.5% command: gnome-shell pid: 1868 mem: 327.5 MiB (1.0%)
  3: cpu: 8.0% command: firefox pid: 2000295 mem: 2876.6 MiB (9.3%)
  4: cpu: 4.1% command: firefox pid: 11086 mem: 25.5 MiB (0.0%)
  5: cpu: 2.9% command: firefox pid: 2484980 mem: 1041.9 MiB (3.3%)
  Memory top: 5 of 303
  1: mem: 2876.6 MiB (9.3%) command: firefox pid: 2000295 cpu: 8.0%
  2: mem: 2842.9 MiB (9.1%) command: firefox pid: 10701 cpu: 15.9%
  3: mem: 1041.9 MiB (3.3%) command: firefox pid: 2484980 cpu: 2.9%
  4: mem: 897.6 MiB (2.9%) command: firefox pid: 2446830 cpu: 1.1%
  5: mem: 442.9 MiB (1.4%) command: thunderbird pid: 2138195 cpu: 0.2%
Info:
  Processes: 303 Power: uptime: 12d 21h 50m states: freeze,mem,disk
    suspend: deep avail: s2idle wakeups: 13 hibernate: platform avail: shutdown,
    reboot, suspend, test_resume image: 12.03 GiB services: gsd-power,
    power-profiles-daemon, upowerd Init: systemd v: 261 default: graphical
    tool: systemctl
  Compilers: clang: 23.1.1 gcc: 16.2.1 Shell: Sudo (sudo) v: 1.9.17p2
    default: Bash v: 5.3.20 running-in: gnome-terminal inxi: 3.3.41

Have you set up your printer for IPP? :backhand_index_pointing_down:

After doing the above, check whether Avahi is running… :backhand_index_pointing_down:

systemctl status avahi-daemon.{socket,service}

That’s basically CUPS, isn’t it?
I faintly remember that once the struggle with its web-I/F eventually produced a working result.
But I don’t remember how. And haven’t been able to get a result in quite a few hours of struggling now.
Searching it I don’t find anything related to Intranet/LAN as opposed to Internet.

cups is a printing service, and while it has a web-based configuration page (running locally on your computer), it also handles locally connected printers.

avahi is a tool for discovering resources shared across the network, among which printers. It does not necessarily distinguish between LAN or WAN, since this distinction is dependent on the network segment, not on the protocol.

In order to configure your printer via cups, click here. :backhand_index_pointing_down:

:backhand_index_pointing_down:

CUPS

driverless:ipps://Kyocera%20ECOSYS%20P5021cdn._ipps._tcp.local/ Kyocera ECOSYS P5021cdn (KPDL), driverless, cups-filters 2.0.1
… is the (only) line from lpinfo -m matching the device (and the last one is everywhere IPP Everywhere - whatever that might tell.

That does look alright to me. :thinking:

I don’t find the place to specify the IPv4-address and guess that’s miss-configured.

That’s what avahi-daemon is supposed to handle automatically.

So that one’s configuration (avahi-daemon) (I ‘know’: “0”) might be the culprit?

Well, I did advise you to check whether it’s running. It doesn’t really need any configuration that I know of — it’s supposed to be plug & pray play.

oops - overlooked that one, here’s its output:

[tn@23ed538 ~]$ systemctl status avahi-daemon.{socket,service}
● avahi-daemon.socket - Avahi mDNS/DNS-SD Stack Activation Socket
     Loaded: loaded (/usr/lib/systemd/system/avahi-daemon.socket; enabled; preset: disabled)
     Active: active (running) since Thu 2026-11-05 15:32:02 CET; 1 week 6 days ago
 Invocation: 0b8fe59a4e1b4ba7ab90a85e6c6832af
   Triggers: ● avahi-daemon.service
     Listen: /run/avahi-daemon/socket (Stream)

Nov 05 15:32:02 23ed538 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.

ohh … preset: disabled) is it that?

Again, that looks okay to me. :man_shrugging:

No, that’s just the configuration as it comes from upstream (freedesktop.org).

To me it looks alright, otherwise ipp kyocera with a long name would not have been found. Just save it and that’s it the network printing setup.

It comes from

… an extra save? Where?
And yes it’s accessible, but not printing (other than through USB).

I just meant finish the setup wizard, give it a name (like Kyocera -LAN so that you know what is what ) etc.
You probably ended with 2 priner icons?
I don’t know what happens if 1 printer is connected at the same time via usb and lan, you can test by disconnecting the usb.

That’s exactly what I’ve done more than a dozen times - these years without success.
And it had worked (and yes with those 2 printer ‘icons’ @ the Desktop and only the one with LAN @ the Laptop) until ~ 2½ years ago.

@merlock in theory you don’t really need avahi, but that means you have to set a static address to the printer which means extra config on the printer or router so for 99% of the users it is easier with avahi, since it is plug and pray :wink:

In practice: don’t hijack other people topics with own problems or offtopic (i don’t think you wanna help demonstrating you disabled the very service helping the setup of the OP).

That’s how my previous configuration worked for ~ a decade (also with past printers).
But then the ((supposed) static address changed during a bundled update (may just have been a coincidence) and I didn’t find a way to restore it again.

Anyway, there’s news:
I got it to work from the Desktop ¹⁾ and am trying to implement it with the exactly same steps on the Laptop but it’s currently running into a cups-filters problem.

¹) More on that tomorrow - was too exhausting and I need some sleep first.

Archwiki - CUPS - Network - Adding known location printers

It is not required to rely on dynamic printer discovery on the network (DNS-SD/mDNS) when the address of the printer is known (e.g. obtained via printers display or other network scanning approaches). A CUPS queue can be directly added to use the printer. Documentation for adding the queue with lpadmin can be found in following sections and official documentation at Setting up printers.