Pamac tray icon not showing

How can I get the pamac tray icon on Gnome?
I have pamac-gnome-integration installed
I have Tray Icons: Reloaded Gnome extension

inxi -F                                                          ✔ 
System:
  Host: shmuel-manjaro Kernel: 6.7.7-1-MANJARO arch: x86_64 bits: 64
  Desktop: GNOME v: 45.4 Distro: Manjaro Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME B365M-A v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 2208
    date: 07/09/2021
Battery:
  ID-1: hidpp_battery_0 charge: 28% condition: N/A
CPU:
  Info: 8-core model: Intel Core i7-9700 bits: 64 type: MCP cache: L2: 2 MiB
  Speed (MHz): avg: 1200 min/max: 800/4700 cores: 1: 1200 2: 1200 3: 1200
    4: 1200 5: 1200 6: 1200 7: 1200 8: 1200
Graphics:
  Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] driver: i915 v: kernel
  Device-2: USB C Video Adaptor driver: N/A type: USB
  Device-3: Microdia USB Live camera driver: snd-usb-audio,uvcvideo
    type: USB
  Display: wayland server: X.org v: 1.21.1.11 with: Xwayland v: 23.2.4
    compositor: gnome-shell driver: X: loaded: modesetting dri: iris gpu: i915
    resolution: no compositor data resolution: 1: 2560x1440 2: 1920x1080
  API: EGL v: 1.5 drivers: iris,swrast
    platforms: wayland,x11,surfaceless,device
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.0.2-manjaro1.1
    renderer: Mesa Intel UHD Graphics 630 (CFL GT2)
Audio:
  Device-1: Intel 200 Series PCH HD Audio driver: snd_hda_intel
  Device-2: Microdia USB Live camera driver: snd-usb-audio,uvcvideo
    type: USB
  API: ALSA v: k6.7.7-1-MANJARO status: kernel-api
  Server-1: PipeWire v: 1.0.3 status: active
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    driver: r8169
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: a8:5e:45:e2:87:3c
  Device-2: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB
  IF: enp0s20f0u3u1 state: down mac: 00:e0:4c:68:51:92
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
    type: USB
  Report: rfkill ID: hci0 state: up address: see --recommends
Drives:
  Local Storage: total: 2.26 TiB used: 1.04 TiB (46.3%)
  ID-1: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB
  ID-2: /dev/sdb vendor: Toshiba model: HDWD120 size: 1.82 TiB
Partition:
  ID-1: / size: 98.85 GiB used: 17.28 GiB (17.5%) fs: ext4 dev: /dev/sda5
  ID-2: /boot/efi size: 96 MiB used: 26.7 MiB (27.8%) fs: vfat
    dev: /dev/sda1
Swap:
  ID-1: swap-1 type: zram size: 7.75 GiB used: 0 KiB (0.0%) dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 40.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB available: 15.49 GiB used: 9.75 GiB (63.0%)
  Processes: 296 Uptime: 34m Shell: Zsh inxi: 3.3.33

Enabled “Pamac Update Indicator”? (Gnome-Shell-extension)

I can’t find an extension by that name, but there is an Arch Linux Updates Indicator.
Should I use that?

The Pamac Updates Indicator extension is part of pamac-gtk, but not pamac-gtk3.

I recommend using AppIndicator and KstatusNotifierItem Support (gnome-shell-extension-appindicator) instead.,

1 Like

Will I get notifications of updates, even though there is no pamac indicator?

YES it´s an alternative I like better than PUI.
And last resort is using pamac (the graphic program) manualy.
But the PUI is included in pamac-gtk - easy to find?
==> Yochanans advice is o.K. like every time he does so.

1 Like

I would need to uninstall pamac-gtk3 in order to install pamac-gtk.
So I think I will go for Arch Linux Updates Indicator

1 Like

Install pamac-gtk and it will prompt to replace pamac-gtk3.

sudo pacman -Syu pamac-gtk

…unless you meant you want to keep pamac-gtk3 installed for some reason?

1 Like

It thought it probably is newer and better package So you say that pamac-gtk is as good?

EDIT: Okay, now I see it is the other way around. pamac-gtk3 is the older and obsolete package.

This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed.