On startup, my primary monitor display isn't properly displaying

On startup, my primary display will have a mirror of my secondary display(vertical) and a partial of what should be on the primary display. Whenever I go into display config and change the display orientation and back to what it was originally the issue fixes itself. Is there a way to avoid doing this?

System:
  Kernel: 5.19.0-3-rt10-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.19-rt-x86_64
    root=UUID=43b5181f-c3cd-4e5b-9ca0-30f9e2d63d41 rw quiet
    udev.log_priority=3
  Desktop: KDE Plasma v: 5.25.5 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop System: iBUYPOWER product: AMD v: N/A
    serial: <superuser required>
  Mobo: ASUSTeK model: ROG STRIX X570-E GAMING v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 3604
    date: 04/14/2021
Battery:
  ID-1: hidpp_battery_0 charge: 47% condition: N/A volts: 3.8 min: N/A
    model: Logitech G703 LIGHTSPEED Wireless Gaming Mouse w/ HERO type: N/A
    serial: <filter> status: discharging
Memory:
  RAM: total: 31.26 GiB used: 2.61 GiB (8.4%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges
    required.
CPU:
  Info: model: AMD Ryzen 9 5900X bits: 64 type: MT MCP arch: Zen 3 gen: 4
    level: v3 built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25)
    model-id: 0x21 (33) stepping: 0 microcode: 0xA201009
  Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
    L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 6 MiB desc: 12x512 KiB
    L3: 64 MiB desc: 2x32 MiB
  Speed (MHz): avg: 2932 high: 4700 min/max: 2200/4950 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2198 2: 2200
    3: 2197 4: 2200 5: 2196 6: 2195 7: 3600 8: 4700 9: 3293 10: 4669 11: 3763
    12: 3520 13: 2193 14: 2194 15: 2211 16: 2200 17: 2200 18: 2200 19: 3700
    20: 3700 21: 3282 22: 3599 23: 3306 24: 2875 bogomips: 177602
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
    svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
    xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: always-on, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GA102 [GeForce RTX 3080 Lite Hash Rate] vendor: Gigabyte
    driver: nouveau v: kernel non-free: 515.xx+ status: current (as of 2022-08)
    arch: Ampere code: GAxxx process: TSMC n7 (7nm) built: 2020-22 pcie:
    gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1,DP-2
    empty: DP-3,HDMI-A-1,HDMI-A-2 bus-ID: 0a:00.0 chip-ID: 10de:2216
    class-ID: 0300
  Device-2: Logitech HD Pro Webcam C920 type: USB
    driver: snd-usb-audio,uvcvideo bus-ID: 1-4.3:7 chip-ID: 046d:082d
    class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 21.1.4 compositor: kwin_x11 driver: X:
    loaded: modesetting alternate: fbdev,vesa gpu: nouveau display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 4000x2560 s-dpi: 96 s-size: 1058x677mm (41.65x26.65")
    s-diag: 1256mm (49.45")
  Monitor-1: DP-1 pos: primary,top-left model: ASUS VG32V serial: <filter>
    built: 2021 res: 1440x2560 hz: 120 dpi: 93 gamma: 1.2
    size: 393x697mm (15.47x27.44") diag: 800mm (31.5") ratio: 16:9 modes:
    max: 2560x1440 min: 720x400
  Monitor-2: DP-2 pos: primary,bottom-r model: ASUS VG32V serial: <filter>
    built: 2021 res: 2560x1440 hz: 120 dpi: 93 gamma: 1.2
    size: 697x393mm (27.44x15.47") diag: 800mm (31.5") ratio: 16:9 modes:
    max: 2560x1440 min: 720x400
  OpenGL: renderer: llvmpipe (LLVM 14.0.6 256 bits) v: 4.5 Mesa 22.1.7
    direct render: Yes
Audio:
  Device-1: NVIDIA GA102 High Definition Audio vendor: Gigabyte
    driver: snd_hda_intel bus-ID: 1-4.2:5 v: kernel pcie: chip-ID: 0909:001c
    class-ID: 0300 gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0a:00.1
    chip-ID: 10de:1aef class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0c:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-3: Audio-Technica AT2020USB+ type: USB
    driver: hid-generic,snd-usb-audio,usbhid
  Device-4: Logitech HD Pro Webcam C920 type: USB
    driver: snd-usb-audio,uvcvideo bus-ID: 1-4.3:7 chip-ID: 046d:082d
    class-ID: 0102 serial: <filter>
  Sound Server-1: ALSA v: k5.19.0-3-rt10-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.21 running: no
  Sound Server-3: PulseAudio v: 16.1 running: yes
  Sound Server-4: PipeWire v: 0.3.57 running: yes
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 bus-ID: 04:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlp4s0 state: down mac: <filter>
  Device-2: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0
    chip-ID: 10ec:8125 class-ID: 0200
  IF: enp5s0 state: down mac: <filter>
  Device-3: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 06:00.0
    chip-ID: 8086:1539 class-ID: 0200
  IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-6:6
    chip-ID: 8087:0029 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 8.19 TiB used: 12.89 GiB (0.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
    model: WDS100T1X0E-00AFY0 size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 614600WD temp: 46.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000DM008-2FR102
    size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    type: HDD rpm: 7200 serial: <filter> rev: 0001 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST6000NE000-2KR101
    size: 5.46 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    type: HDD rpm: 7200 serial: <filter> rev: EN01 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 12.89 GiB (0.7%)
    fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: 43b5181f-c3cd-4e5b-9ca0-30f9e2d63d41
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 316 KiB
    (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL
    uuid: 9574-8145
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 100 MiB fs: vfat label: SYSTEM
    uuid: 2676-5DD1
  ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 600 MiB fs: ntfs label: Recovery
    uuid: 068476A084769243
  ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 930.81 GiB fs: ntfs
    label: Windows uuid: A21678CC1678A2C9
  ID-5: /dev/sdb1 maj-min: 8:17 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-6: /dev/sdb2 maj-min: 8:18 size: 5.46 TiB fs: ntfs label: New Volume
    uuid: 48D622E2D622CFCC
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-1:2 info: Logitech PRO Gaming Keyboard type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 500mA chip-ID: 046d:c339 class-ID: 0300 serial: <filter>
  Hub-2: 1-4:3 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    chip-ID: 0bda:5411 class-ID: 0900
  Device-1: 1-4.2:5 info: Audio-Technica AT2020USB+ type: Audio,HID
    driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1
    speed: 12 Mb/s power: 100mA chip-ID: 0909:001c class-ID: 0300
  Device-2: 1-4.3:7 info: Logitech HD Pro Webcam C920 type: Video,Audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
    power: 500mA chip-ID: 046d:082d class-ID: 0102 serial: <filter>
  Hub-3: 1-4.4:8 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    chip-ID: 0bda:5411 class-ID: 0900
  Hub-4: 1-5:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 1-6:6 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
    class-ID: e001
  Hub-5: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-6: 2-4:2 info: Realtek Hub ports: 4 rev: 3.2 speed: 5 Gb/s
    chip-ID: 0bda:0411 class-ID: 0900
  Hub-7: 2-4.4:3 info: Realtek Hub ports: 4 rev: 3.2 speed: 5 Gb/s
    chip-ID: 0bda:0411 class-ID: 0900
  Hub-8: 3-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-4:2 info: ASUSTek AURA LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
    chip-ID: 0b05:18f3 class-ID: 0300 serial: <filter>
  Hub-9: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-10: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 5-3:2 info: Logitech Cordless Mouse Receiver
    type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
    rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c539 class-ID: 0300
  Hub-11: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 42.0 C mobo: 43.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 567 Uptime: 5m wakeups: 2 Init: systemd v: 251 default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: 1238
  pm: pacman pkgs: 1235 libs: 320 tools: pamac pm: flatpak pkgs: 0 pm: snap
  pkgs: 3 Shell: Zsh v: 5.9 default: Bash v: 5.1.16 running-in: konsole
  inxi: 3.3.21

you are not running nvidia drivers, so install them - go to system settings/hardware configuration, and click ‘auto install proprietary drivers’, when done reboot

and why are you using this kernel: Kernel: 5.19.0-3-rt10-MANJARO?

When I install the Nvidia proprietary drivers I’m get stuck on the /dev/sda clean screen. To get out I have to uninstall the Nvidia drivers.

I think I was messing around with how the kernels work, I’m back on 5.15.65 now.

you probably need to add this kernel parameter:
ibt=off
open grub:
kate /etc/default/grub
and edit this line: GRUB_CMDLINE_LINUX_DEFAULT= inside the quotes add the parameter, dont remove anything from there, add it to existing one, save the file, update grub:
sudo update-grub
install nvidia drivers, reboot and see if that helped

Yup that did the trick, thank you!

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.