If you don’t build the video driver with DKMS, Manjaro will not provide them for your AUR kernel.
Hi, yes, it’s empty. I thought I don’t need to install nvidia if I do it with “sudo mhwd -a pci nonfree 0300”
I’m installing it now, I’ll write later how it goes.
Well, it installed ok, but “nvidia-smi | egrep -i Version” returns still empty.
As for the other thing, it’s stable:
pacman-mirrors -G
stable
please post the output of
inxi --admin --verbosity=7 --filter --no-host --width
again to see if there are changes and also the
pacman-mirrors -G
$pacman-mirrors -G
stable
$ inxi --admin --verbosity=7 --filter --no-host --width
System:
Kernel: 5.18.4-xanmod1-1 arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-linux-xanmod
root=UUID=5fae2091-744a-46c3-8daf-e7bb155d1c96 rw quiet apparmor=1
security=apparmor resume=UUID=faed2235-2e05-4af0-92a5-d7a5bcd92eae
udev.log_priority=3 idle = nomwait
Desktop: KDE Plasma v: 5.24.6 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: ASUS TUF Gaming A15 FA506QM_FA506QM
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: FA506QM v: 1.0 serial: <superuser required>
UEFI: American Megatrends LLC. v: FA506QM.300 date: 01/14/2021
Battery:
ID-1: BAT1 charge: 80.5 Wh (100.0%) condition: 80.5/90.2 Wh (89.2%)
volts: 17.1 min: 15.9 model: ASUS A32-K55 type: Li-ion serial: N/A
status: full
Memory:
RAM: total: 30.79 GiB used: 8.75 GiB (28.4%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 4 level: v3 built: 2021-22 process: TSMC n7 (7nm)
family: 0x19 (25) model-id: 0x50 (80) stepping: 0 microcode: 0xA50000B
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 3163 high: 3716 min/max: 400/4463 boost: enabled
scaling: driver: amd-pstate governor: performance cores: 1: 3246 2: 2901
3: 3168 4: 3716 5: 3168 6: 3231 7: 3136 8: 3167 9: 3169 10: 3162 11: 2906
12: 3051 13: 3081 14: 3169 15: 3170 16: 3167 bogomips: 102206
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: ASUSTeK
driver: N/A alternate: nvidiafb, nouveau non-free: 515.xx+ status: current
(as of 2022-08) arch: Ampere code: GAxxx process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:2520 class-ID: 0300
Device-2: AMD Cezanne vendor: ASUSTeK driver: amdgpu v: kernel
arch: GCN-5.1 code: Vega-2 process: TSMC n7 (7nm) built: 2018-21 pcie:
gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
active: eDP-1 empty: HDMI-A-1 bus-ID: 05:00.0 chip-ID: 1002:1638
class-ID: 0300
Device-3: Sonix USB2.0 HD UVC WebCam type: USB driver: uvcvideo
bus-ID: 1-4:2 chip-ID: 322e:202c class-ID: 0e02
Display: x11 server: X.Org v: 21.1.4 compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: eDP-1 mapped: eDP model: Najing CEC Panda 0x004d built: 2019
res: 1920x1080 hz: 144 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
OpenGL: renderer: AMD RENOIR (LLVM 14.0.6 DRM 3.46 5.18.4-xanmod1-1) v: 4.6
Mesa 22.1.6 direct render: Yes
Audio:
Device-1: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x,
snd_acp_pci, snd_sof_amd_renoir pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.5 chip-ID: 1022:15e2
class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound Server-1: ALSA v: k5.18.4-xanmod1-1 running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: yes
Sound Server-4: PipeWire v: 0.3.56 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp2s0 state: down mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-3:3
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 2 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 843.98 GiB (88.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: HFM001TD3JX013N
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: <filter> rev: 41000C20 temp: 43.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 919.63 GiB size: 904.12 GiB (98.31%) used: 843.98 GiB
(93.3%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
uuid: 5fae2091-744a-46c3-8daf-e7bb155d1c96
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 296 KiB
(0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: NO_LABEL
uuid: 1349-F5F6
Swap:
Kernel: swappiness: 30 (default 60) cache-pressure: 50 (default 100)
ID-1: swap-1 type: partition size: 33.94 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A
uuid: faed2235-2e05-4af0-92a5-d7a5bcd92eae
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-4:2 info: Sonix USB2.0 HD UVC WebCam type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 322e:202c class-ID: 0e02
Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-3:3 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 73.5 C mobo: N/A gpu: amdgpu temp: 65.0 C
Fan Speeds (RPM): cpu: 3200
Info:
Processes: 450 Uptime: 8h 36m wakeups: 4818 Init: systemd v: 251
default: graphical tool: systemctl Compilers: gcc: 12.1.1 alt: 10/11
clang: 14.0.6 Packages: 2123 pm: pacman pkgs: 2097 libs: 525
tools: octopi,pamac,yay pm: flatpak pkgs: 21 pm: snap pkgs: 5 Shell: Bash
v: 5.1.16 running-in: konsole inxi: 3.3.21
Moderator edit: In the future, please use proper formatting: [HowTo] Post command output and file content as formatted text
okay is there any reason to use this 5.18 kernel or did you have tried to do an update first ?
i would recommend to run a update first with
sudo pacman -Scc && sudo pacman-mirrors -f5
sudo pacman -Syyu
I think at some point I just upgraded everything and nvidia stopped working but I didn’t need it then and I forgot to ask on the forum why. I’m pasting you below the output of the install I did, it keeps on getting nvidia:module not found . I’ll run now the two commands.
sudo pacman -Syu linux518-nvidia
[sudo] password for denijane:
:: Синхронизиране на пакетната база...
core is up to date
extra is up to date
community is up to date
multilib is up to date
archlinuxfr is up to date
предупреждение: linux518-nvidia-515.65.01-2 е актуален -- преинсталиране
:: Започване на пълно системно надграждане...
предупреждение: binutils: игнориране надграждането на пакет (2.36.1-3 => 2.39-2)
решаване на зависимости...
търсене за конфликтни пакети...
Пакети (1) linux518-nvidia-515.65.01-2
Общ инсталиран размер: 38,48 MiB
Нетен размер на актуализация: 0,00 MiB
:: Продължаване с инсталацията? [Y/n] y
(1/1) проверка на ключовете [#######################################################################################] 100%
(1/1) проверка пакетна цялост [#######################################################################################] 100%
(1/1) зареждане на пакета [#######################################################################################] 100%
(1/1) проверка за файлови конфликти [#######################################################################################] 100%
(1/1) проверка за свободно място [#######################################################################################] 100%
:: Пускане на пре-транзакционни куки...
(1/1) Save Linux kernel modules
:: Обработване на промените в пакета...
(1/1) реинсталиране linux518-nvidia [#######################################################################################] 100%
:: Пускане на след-транзакционни куки...
(1/4) Arming ConditionNeedsUpdate...
(2/4) Updating module dependencies...
(3/4) Updating Kernel initcpios for Nvidia-DRM...
==> Building image from preset: /etc/mkinitcpio.d/linux510.preset: 'default'
-> -k /boot/vmlinuz-5.10-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.10-x86_64.img
==> Starting build: 5.10.136-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.10-x86_64.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux510.preset: 'fallback'
-> -k /boot/vmlinuz-5.10-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.10-x86_64-fallback.img -S autodetect
==> Starting build: 5.10.136-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: qla2xxx
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.10-x86_64-fallback.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux512.preset: 'default'
-> -k /boot/vmlinuz-5.12-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.12-x86_64.img
==> Starting build: 5.12.19-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.12-x86_64.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux512.preset: 'fallback'
-> -k /boot/vmlinuz-5.12-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.12-x86_64-fallback.img -S autodetect
==> Starting build: 5.12.19-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: qla2xxx
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.12-x86_64-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux513.preset: 'default'
-> -k /boot/vmlinuz-5.13-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.13-x86_64.img
==> Starting build: 5.13.19-2-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.13-x86_64.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux513.preset: 'fallback'
-> -k /boot/vmlinuz-5.13-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.13-x86_64-fallback.img -S autodetect
==> Starting build: 5.13.19-2-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: qla2xxx
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.13-x86_64-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux514.preset: 'default'
-> -k /boot/vmlinuz-5.14-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.14-x86_64.img
==> Starting build: 5.14.21-2-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.14-x86_64.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux514.preset: 'fallback'
-> -k /boot/vmlinuz-5.14-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.14-x86_64-fallback.img -S autodetect
==> Starting build: 5.14.21-2-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: qla2xxx
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.14-x86_64-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux515.preset: 'default'
-> -k /boot/vmlinuz-5.15-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.15-x86_64.img
==> Starting build: 5.15.60-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.15-x86_64.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux515.preset: 'fallback'
-> -k /boot/vmlinuz-5.15-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.15-x86_64-fallback.img -S autodetect
==> Starting build: 5.15.60-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: qla2xxx
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.15-x86_64-fallback.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux518.preset: 'default'
-> -k /boot/vmlinuz-5.18-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.18-x86_64.img
==> Starting build: 5.18.17-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.18-x86_64.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux518.preset: 'fallback'
-> -k /boot/vmlinuz-5.18-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.18-x86_64-fallback.img -S autodetect
==> Starting build: 5.18.17-1-MANJARO
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: qla2xxx
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.18-x86_64-fallback.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'default'
-> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge.img
==> Starting build: 5.17.7-xanmod1-1-x64v2
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-xanmod-edge.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'fallback'
-> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge-fallback.img -S autodetect
==> Starting build: 5.17.7-xanmod1-1-x64v2
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla2xxx
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-xanmod-edge-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod.preset: 'default'
-> -k /boot/vmlinuz-linux-xanmod -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod.img
==> Starting build: 5.18.4-xanmod1-1
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-xanmod.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod.preset: 'fallback'
-> -k /boot/vmlinuz-linux-xanmod -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-fallback.img -S autodetect
==> Starting build: 5.18.4-xanmod1-1
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: qed
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: qla2xxx
==> WARNING: Possibly missing firmware for module: qla1280
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [resume]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> ERROR: module not found: `nvidia'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-xanmod-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/manjaro-xanmod.preset: 'default'
-> -k /boot/vmlinuz-manjaro-xanmod -c /etc/mkinitcpio.conf -g /boot/initramfs-manjaro-xanmod.img
==> ERROR: '/lib/modules/5.15.30-xanmod1-MANJARO' is not a valid kernel module directory
==> Building image from preset: /etc/mkinitcpio.d/manjaro-xanmod.preset: 'fallback'
-> -k /boot/vmlinuz-manjaro-xanmod -c /etc/mkinitcpio.conf -g /boot/initramfs-manjaro-xanmod-fallback.img -S autodetect
==> ERROR: '/lib/modules/5.15.30-xanmod1-MANJARO' is not a valid kernel module directory
грешка: неуспешно правилно изпълнение на команда
(4/4) Restore Linux kernel modules
okay please report if you’ve updated. we should have to recheck some things after updating and before ongoing.
Yeah, I updated.
please post the output of
inxi --admin --verbosity=7 --filter --no-host --width
again
System:
Kernel: 5.18.4-xanmod1-1 arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-linux-xanmod
root=UUID=5fae2091-744a-46c3-8daf-e7bb155d1c96 rw quiet apparmor=1
security=apparmor resume=UUID=faed2235-2e05-4af0-92a5-d7a5bcd92eae
udev.log_priority=3 idle = nomwait
Desktop: KDE Plasma v: 5.24.6 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: ASUS TUF Gaming A15 FA506QM_FA506QM
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: FA506QM v: 1.0 serial: <superuser required>
UEFI: American Megatrends LLC. v: FA506QM.300 date: 01/14/2021
Battery:
ID-1: BAT1 charge: 80.5 Wh (100.0%) condition: 80.5/90.2 Wh (89.2%)
volts: 17.1 min: 15.9 model: ASUS A32-K55 type: Li-ion serial: N/A
status: full
Memory:
RAM: total: 30.79 GiB used: 9.04 GiB (29.4%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 4 level: v3 built: 2021-22 process: TSMC n7 (7nm)
family: 0x19 (25) model-id: 0x50 (80) stepping: 0 microcode: 0xA50000B
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 3092 high: 3235 min/max: 400/4463 boost: enabled
scaling: driver: amd-pstate governor: performance cores: 1: 3235 2: 3166
3: 3104 4: 3180 5: 3120 6: 2913 7: 3228 8: 2943 9: 3156 10: 3042 11: 3166
12: 3167 13: 2976 14: 3049 15: 2999 16: 3028 bogomips: 102206
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: ASUSTeK
driver: N/A alternate: nvidiafb, nouveau non-free: 515.xx+ status: current
(as of 2022-08) arch: Ampere code: GAxxx process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:2520 class-ID: 0300
Device-2: AMD Cezanne vendor: ASUSTeK driver: amdgpu v: kernel
arch: GCN-5.1 code: Vega-2 process: TSMC n7 (7nm) built: 2018-21 pcie:
gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
active: eDP-1 empty: HDMI-A-1 bus-ID: 05:00.0 chip-ID: 1002:1638
class-ID: 0300
Device-3: Sonix USB2.0 HD UVC WebCam type: USB driver: uvcvideo
bus-ID: 1-4:2 chip-ID: 322e:202c class-ID: 0e02
Display: x11 server: X.Org v: 21.1.4 compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: eDP-1 mapped: eDP model: Najing CEC Panda 0x004d built: 2019
res: 1920x1080 hz: 144 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
OpenGL: renderer: AMD RENOIR (LLVM 14.0.6 DRM 3.46 5.18.4-xanmod1-1) v: 4.6
Mesa 22.1.6 direct render: Yes
Audio:
Device-1: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x,
snd_acp_pci, snd_sof_amd_renoir pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.5 chip-ID: 1022:15e2
class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound Server-1: ALSA v: k5.18.4-xanmod1-1 running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: yes
Sound Server-4: PipeWire v: 0.3.56 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp2s0 state: down mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-3:3
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 2 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 811 GiB (85.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: HFM001TD3JX013N
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: <filter> rev: 41000C20 temp: 44.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 919.63 GiB size: 904.12 GiB (98.31%) used: 811 GiB (89.7%)
fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
uuid: 5fae2091-744a-46c3-8daf-e7bb155d1c96
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 296 KiB
(0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: NO_LABEL
uuid: 1349-F5F6
Swap:
Kernel: swappiness: 30 (default 60) cache-pressure: 50 (default 100)
ID-1: swap-1 type: partition size: 33.94 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A
uuid: faed2235-2e05-4af0-92a5-d7a5bcd92eae
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-4:2 info: Sonix USB2.0 HD UVC WebCam type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 322e:202c class-ID: 0e02
Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-3:3 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 72.5 C mobo: N/A gpu: amdgpu temp: 63.0 C
Fan Speeds (RPM): cpu: 3200
Info:
Processes: 444 Uptime: 8h 49m wakeups: 6850 Init: systemd v: 251
default: graphical tool: systemctl Compilers: gcc: 12.1.1 alt: 10/11
clang: 14.0.6 Packages: 2123 pm: pacman pkgs: 2097 libs: 525
tools: octopi,pamac,yay pm: flatpak pkgs: 21 pm: snap pkgs: 5 Shell: Bash
v: 5.1.16 running-in: konsole inxi: 3.3.21
From what I could see you have a lot of kernels installed, some of them EOL, and thus the nvidia modules aren’t available any longer.
So, you’d first have to soft that out by removing them, then try again.
He’s running Xanmod kernel from the AUR.
//EDIT: this is also true for non existent kernels we can see in the list above.
in fact this 5.18 kernel isn’t a good way to proceed. might you upgrade to kernel 5.19, keep the 5.15 as backup and clean up the other kernel-mess that is installed ?
Ok, I will do so later and I’ll tell you how it goes. Should I reinstall linux519-nvidia manually or the system will do it automatically? Also, I thought having different kernels shouldn’t be a problem since usually nvidia is automatically installed with the latest one? Or the prolbem is I’m getting the kernel from aur?
I realize that. But I think the problem is because the other kernels and thus the nvidia drivers are no longer available.
AFAIK it’s not the different kernels, but the EOL kernels.
please clean up the kernel mess first, after this we’ll see what is needed to install/reinstall.
after cleaning up check with
uname -a
what kernel you’re using. it should be either 5.15 or 5.19 (both should be allright)
I’m replying to the thread, it doesn’t work on xanmod because what I said.
It would not work either on the non existent kernel like 5.12 5.13 5.14 and so on, that’s right, but this is a secondary issue non relevant to xanmod not working.