I installed ALSA and my sound card could be seen in the system but there is still no sound.
My sound card model is RME Hammerfall HDSP 9632
inxi -Fazy
System:
Kernel: 5.9.11-3-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.9-x86_64
root=UUID=bf1f4795-e218-4c64-849b-8ed7623d3a28 rw quiet apparmor=1
security=apparmor resume=UUID=8537929b-909f-4f2b-a362-e8a9845931b0
udev.log_priority=3
Desktop: Xfce 4.14.3 tk: Gtk 3.24.23 info: xfce4-panel wm: xfwm4
dm: LightDM 1.30.0 Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: B150M-PLUS v: Rev X.0x serial: <filter>
UEFI [Legacy]: American Megatrends v: 3402 date: 07/10/2017
CPU:
Info: Quad Core model: Intel Core i7-6700 bits: 64 type: MT MCP
arch: Skylake-S family: 6 model-id: 5E (94) stepping: 3 microcode: E2
L2 cache: 8192 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 54417
Speed: 2001 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 2000 2: 2001
3: 2000 4: 2000 5: 2000 6: 2001 7: 2001 8: 2000
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT vulnerable
Graphics:
Device-1: Intel HD Graphics 530 vendor: ASUSTeK driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:1912
Display: x11 server: X.Org 1.20.10 driver: intel unloaded: modesetting
alternate: fbdev,vesa display ID: :0.0 screens: 1
Screen-1: 0 s-res: 3840x1200 s-dpi: 96 s-size: 1016x318mm (40.0x12.5")
s-diag: 1065mm (41.9")
Monitor-1: HDMI1 res: 1920x1200 hz: 60 dpi: 90 size: 540x350mm (21.3x13.8")
diag: 644mm (25.3")
Monitor-2: HDMI2 res: 1920x1200 hz: 60 dpi: 90 size: 540x350mm (21.3x13.8")
diag: 644mm (25.3")
OpenGL: renderer: Mesa Intel HD Graphics 530 (SKL GT2) v: 4.6 Mesa 20.2.3
direct render: Yes
Audio:
Device-1: Xilinx RME Hammerfall DSP driver: snd_hdsp v: kernel
bus ID: 04:00.0 chip ID: 10ee:3fc5
Device-2: Logitech HD Webcam C910 type: USB driver: snd-usb-audio,uvcvideo
bus ID: 1-7:8 chip ID: 046d:0821 serial: <filter>
Sound Server: ALSA v: k5.9.11-3-MANJARO
Network:
Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel
port: f040 bus ID: 00:1f.6 chip ID: 8086:15b8
IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 3.82 TiB used: 1.25 TiB (32.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda vendor: Intel model: SSDSCKKR080H6 size: 74.53 GiB
block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter>
rev: G100 scheme: GPT
ID-2: /dev/sdb vendor: OCZ model: ARC100 size: 111.79 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 1.01
scheme: MBR
ID-3: /dev/sdc vendor: Seagate model: ST31000528AS size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
rotation: 7200 rpm serial: <filter> rev: CC37 scheme: MBR
ID-4: /dev/sdd vendor: Western Digital model: WD30PURX-64P6ZY0
size: 2.73 TiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
rotation: 5400 rpm serial: <filter> rev: 0A80 scheme: GPT
ID-5: /dev/sde type: USB model: Kindle Internal Storage size: 1.33 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 0100
scheme: MBR
Partition:
ID-1: / raw size: 102.99 GiB size: 100.87 GiB (97.94%)
used: 56.06 GiB (55.6%) fs: ext4 dev: /dev/sdb1
Swap:
Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.80 GiB used: 1020.0 MiB (11.3%)
priority: -2 dev: /dev/sdb2
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Info:
Processes: 234 Uptime: 1d 3h 57m Memory: 15.50 GiB used: 11.82 GiB (76.3%)
Init: systemd v: 246 Compilers: gcc: N/A Packages: pacman: 1123 lib: 333
flatpak: 0 Shell: Bash v: 5.0.18 running in: xfce4-terminal inxi: 3.1.08
pa-info
> pulseaudio_ps_do
tekno23 1060 0.0 0.0 1024368 11344 ? S<sl Dec25 0:05 /usr/bin/pulseaudio --daemonize=no --log-target=journal
tekno23 1074 0.1 0.1 514060 17180 ? Sl Dec25 1:41 /usr/lib/xfce4/panel/wrapper-2.0 /usr/lib/xfce4/panel/plugins/libpulseaudio-plugin.so 9 14680074 pulseaudio PulseAudio Plugin Adjust the audio volume of the PulseAudio sound system
tekno23 18445 0.0 0.0 3144 856 pts/0 S+ 14:49 0:00 grep pulseaudio
________________
> which pulseaudio
/usr/bin/pulseaudio
________________
> pidof pulseaudio
1060
________________
> pulseaudio --version
pulseaudio 14.0
________________
> pactl info
Server String: /run/user/1000/pulse/native
Library Protocol Version: 34
Server Protocol Version: 34
Is Local: yes
Client Index: 8
Tile Size: 65472
User Name: tekno23
Host Name: tekno23-VI
Server Name: pulseaudio
Server Version: 14.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_04_00.0.multichannel-output
Default Source: alsa_input.usb-046d_0821_CE7141A0-00.analog-stereo
Cookie: 7cb9:d398
________________
> pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "14.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "14.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "14.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "14.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "14.0"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "14.0"
Module #6
Name: module-alsa-card
Argument: device_id="1" name="usb-046d_0821_CE7141A0-00" card_name="alsa_card.usb-046d_0821_CE7141A0-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "14.0"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_04_00.0" card_name="alsa_card.pci-0000_04_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "14.0"
Module #8
Name: module-jackdbus-detect
Argument: channels=2
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is started"
module.version = "14.0"
Module #9
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "14.0"
Module #10
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "14.0"
Module #11
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "14.0"
Module #12
Name: module-dbus-protocol
Argument:
Usage counter: n/a
Properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "14.0"
Module #13
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "14.0"
Module #14
Name: module-gsettings
Argument:
Usage counter: n/a
Properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "14.0"
Module #15
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "14.0"
Module #16
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "14.0"
Module #17
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "14.0"
Module #18
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "14.0"
Module #19
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "14.0"
Module #20
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "14.0"
Module #21
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "14.0"
Module #22
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "14.0"
Module #23
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "14.0"
Module #24
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "14.0"
Module #25
Name: module-x11-publish
Argument: display=:0.0 xauthority=/home/tekno23/.Xauthority
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "14.0"
Module #26
Name: module-x11-xsmp
Argument: display=:0.0 xauthority=/home/tekno23/.Xauthority session_manager=local/tekno23-VI:@/tmp/.ICE-unix/993,unix/tekno23-VI:/tmp/.ICE-unix/993
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "14.0"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_04_00.0.multichannel-output
Description: RME Hammerfall DSP Multichannel
Driver: module-alsa-card.c
Sample Specification: s32le 12ch 48000Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right,aux0,aux1,aux2,aux3
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB, side-left: 65536 / 100% / 0.00 dB, side-right: 65536 / 100% / 0.00 dB, aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB, aux2: 65536 / 100% / 0.00 dB, aux3: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_04_00.0.multichannel-output.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "RME Hammerfall HDSP 9632"
alsa.id = "RME Hammerfall HDSP 9632"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Hammerfall DSP"
alsa.long_card_name = "RME Hammerfall HDSP 9632 at 0xf7000000, irq 18"
alsa.driver_name = "snd_hdsp"
device.bus_path = "pci-0000:04:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.2/0000:03:00.0/0000:04:00.0/sound/card0"
device.bus = "pci"
device.vendor.id = "10ee"
device.vendor.name = "Xilinx Corporation"
device.product.id = "3fc5"
device.product.name = "RME Hammerfall DSP"
device.string = "plug:hw:0"
device.buffering.buffer_size = "786432"
device.buffering.fragment_size = "393216"
device.access_mode = "mmap+timer"
device.profile.name = "multichannel-output"
device.profile.description = "Multichannel"
device.description = "RME Hammerfall DSP Multichannel"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_input.usb-046d_0821_CE7141A0-00.analog-stereo
Description: HD Webcam C910 Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 32000Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 52057 / 79% / -6.00 dB, front-right: 52057 / 79% / -6.00 dB
balance 0.00
Base Volume: 135877 / 207% / 19.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "USB Device 0x46d:0x821"
alsa.long_card_name = "USB Device 0x46d:0x821 at usb-0000:00:14.0-7, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:7:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/sound/card1"
udev.id = "usb-046d_0821_CE7141A0-00"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0821"
device.product.name = "HD Webcam C910"
device.serial = "046d_0821_CE7141A0"
device.form_factor = "webcam"
device.string = "front:1"
device.buffering.buffer_size = "256000"
device.buffering.fragment_size = "128000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "HD Webcam C910 Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
Active Port: analog-input-mic
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_output.pci-0000_04_00.0.multichannel-output.monitor
Description: Monitor of RME Hammerfall DSP Multichannel
Driver: module-alsa-card.c
Sample Specification: s32le 12ch 48000Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right,aux0,aux1,aux2,aux3
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB, side-left: 65536 / 100% / 0.00 dB, side-right: 65536 / 100% / 0.00 dB, aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB, aux2: 65536 / 100% / 0.00 dB, aux3: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_04_00.0.multichannel-output
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of RME Hammerfall DSP Multichannel"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "Hammerfall DSP"
alsa.long_card_name = "RME Hammerfall HDSP 9632 at 0xf7000000, irq 18"
alsa.driver_name = "snd_hdsp"
device.bus_path = "pci-0000:04:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.2/0000:03:00.0/0000:04:00.0/sound/card0"
device.bus = "pci"
device.vendor.id = "10ee"
device.vendor.name = "Xilinx Corporation"
device.product.id = "3fc5"
device.product.name = "RME Hammerfall DSP"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 20
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #1
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "xfwm4"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
window.x11.display = ":0"
window.x11.screen = "0"
application.process.id = "1050"
application.process.user = "tekno23"
application.process.host = "tekno23-VI"
application.process.binary = "xfwm4"
application.language = "en_US.utf8"
application.process.machine_id = "78593ffb51814530ba0dfc450568d8be"
application.process.session_id = "2"
Client #2
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "xfce4-pulseaudio-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.version = "0.4.3"
application.id = "org.xfce.pulseaudio-plugin"
application.icon_name = "multimedia-volume-control"
application.process.id = "1074"
application.process.user = "tekno23"
application.process.host = "tekno23-VI"
application.process.binary = "wrapper-2.0"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "78593ffb51814530ba0dfc450568d8be"
application.process.session_id = "2"
Client #5
Driver: module-x11-xsmp.c
Owner Module: 26
Properties:
application.name = "XSMP Session on xfce4-session as 2e553248e-6280-4b88-8549-c1b9ee7f26e8"
xsmp.vendor = "xfce4-session"
xsmp.client.id = "2e553248e-6280-4b88-8549-c1b9ee7f26e8"
Client #6
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.process.id = "1310"
application.process.user = "tekno23"
application.process.host = "tekno23-VI"
application.process.binary = "firefox"
application.language = "en_US.utf8"
window.x11.display = ":0.0"
application.process.machine_id = "78593ffb51814530ba0dfc450568d8be"
application.process.session_id = "2"
application.icon_name = "firefox"
Client #9
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.process.id = "18450"
application.process.user = "tekno23"
application.process.host = "tekno23-VI"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0.0"
application.process.machine_id = "78593ffb51814530ba0dfc450568d8be"
application.process.session_id = "2"
Card #0
Name: alsa_card.usb-046d_0821_CE7141A0-00
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "1"
alsa.card_name = "USB Device 0x46d:0x821"
alsa.long_card_name = "USB Device 0x46d:0x821 at usb-0000:00:14.0-7, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:7:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/sound/card1"
udev.id = "usb-046d_0821_CE7141A0-00"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0821"
device.product.name = "HD Webcam C910"
device.serial = "046d_0821_CE7141A0"
device.form_factor = "webcam"
device.string = "1"
device.description = "HD Webcam C910"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo
Card #1
Name: alsa_card.pci-0000_04_00.0
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "Hammerfall DSP"
alsa.long_card_name = "RME Hammerfall HDSP 9632 at 0xf7000000, irq 18"
alsa.driver_name = "snd_hdsp"
device.bus_path = "pci-0000:04:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.2/0000:03:00.0/0000:04:00.0/sound/card0"
device.bus = "pci"
device.vendor.id = "10ee"
device.vendor.name = "Xilinx Corporation"
device.product.id = "3fc5"
device.product.name = "RME Hammerfall DSP"
device.string = "0"
device.description = "RME Hammerfall DSP"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:multichannel-input: Multichannel Input (sinks: 0, sources: 1, priority: 1, available: yes)
output:multichannel-output: Multichannel Output (sinks: 1, sources: 0, priority: 100, available: yes)
output:multichannel-output+input:multichannel-input: Multichannel Duplex (sinks: 1, sources: 1, priority: 101, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:multichannel-output+input:multichannel-input
cat /etc/pulse/daemon.conf
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; remixing-produce-lfe = no
; remixing-consume-lfe = no
; lfe-crossover-freq = 0
; flat-volumes = no
; rescue-streams = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
cat /etc/pulse/client.conf
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
autospawn = no
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
cat /etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
load-module module-dbus-protocol
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
cat /etc/pulse/system.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
ls -alt /dev/snd/*
crw-rw----+ 1 root audio 116, 2 Dec 26 10:54 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Dec 25 10:53 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 7 Dec 25 10:53 /dev/snd/pcmC1D0c
crw-rw----+ 1 root audio 116, 8 Dec 25 10:51 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 6 Dec 25 10:51 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 5 Dec 25 10:51 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 4 Dec 25 10:51 /dev/snd/midiC0D0
crw-rw----+ 1 root audio 116, 33 Dec 25 10:51 /dev/snd/timer
crw-rw----+ 1 root audio 116, 1 Dec 25 10:51 /dev/snd/seq
/dev/snd/by-id:
total 0
drwxr-xr-x 2 root root 60 Dec 25 10:51 .
drwxr-xr-x 4 root root 260 Dec 25 10:51 ..
lrwxrwxrwx 1 root root 12 Dec 25 10:51 usb-046d_0821_CE7141A0-00 -> ../controlC1
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Dec 25 10:51 .
drwxr-xr-x 4 root root 260 Dec 25 10:51 ..
lrwxrwxrwx 1 root root 12 Dec 25 10:51 pci-0000:00:14.0-usb-0:7:1.0 -> ../controlC1
lrwxrwxrwx 1 root root 12 Dec 25 10:51 pci-0000:04:00.0 -> ../controlC0
lsof /dev/snd/*
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
pulseaudi 1060 tekno23 21u CHR 116,8 0t0 503 /dev/snd/controlC1
________________
> jacks_do
card=0
card=1
________________
> aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=DSP
Hammerfall DSP, RME Hammerfall HDSP 9632
Default Audio Device
usbstream:CARD=DSP
Hammerfall DSP
USB Stream Output
usbstream:CARD=U0x46d0x821
USB Device 0x46d:0x821
USB Stream Output
________________
> arecord -L
null
Discard all samples (playback) or generate zero samples (capture)
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=DSP
Hammerfall DSP, RME Hammerfall HDSP 9632
Default Audio Device
usbstream:CARD=DSP
Hammerfall DSP
USB Stream Output
sysdefault:CARD=U0x46d0x821
USB Device 0x46d:0x821, USB Audio
Default Audio Device
front:CARD=U0x46d0x821,DEV=0
USB Device 0x46d:0x821, USB Audio
Front output / input
usbstream:CARD=U0x46d0x821
USB Device 0x46d:0x821
USB Stream Output
________________
> alsa_info_do
dmesg: read kernel buffer failed: Operation not permitted
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.65
!!################################
!!Script ran on: Sat Dec 26 12:49:17 UTC 2020
!!Linux Distribution
!!------------------
ID_LIKE=arch
!!DMI Information
!!---------------
Manufacturer: System manufacturer
Product Name: System Product Name
Product Version: System Version
Firmware Version: 3402
System SKU: SKU
Board Vendor: ASUSTeK COMPUTER INC.
Board Name: B150M-PLUS
!!ACPI Device Status Information
!!---------------
/sys/bus/acpi/devices/ACPI000C:00/status 15
/sys/bus/acpi/devices/INT33A1:00/status 15
/sys/bus/acpi/devices/INT340E:00/status 15
/sys/bus/acpi/devices/INT3F0D:00/status 15
/sys/bus/acpi/devices/LNXPOWER:00/status 1
/sys/bus/acpi/devices/LNXPOWER:01/status 1
/sys/bus/acpi/devices/LNXPOWER:02/status 1
/sys/bus/acpi/devices/LNXPOWER:03/status 1
/sys/bus/acpi/devices/LNXPOWER:04/status 1
/sys/bus/acpi/devices/LNXPOWER:05/status 1
/sys/bus/acpi/devices/LNXPOWER:06/status 1
/sys/bus/acpi/devices/LNXPOWER:07/status 1
/sys/bus/acpi/devices/LNXPOWER:08/status 1
/sys/bus/acpi/devices/LNXPOWER:09/status 1
/sys/bus/acpi/devices/LNXPOWER:0a/status 1
/sys/bus/acpi/devices/LNXPOWER:0b/status 1
/sys/bus/acpi/devices/LNXPOWER:0c/status 1
/sys/bus/acpi/devices/LNXPOWER:0d/status 1
/sys/bus/acpi/devices/LNXPOWER:0e/status 1
/sys/bus/acpi/devices/LNXPOWER:0f/status 1
/sys/bus/acpi/devices/LNXPOWER:10/status 1
/sys/bus/acpi/devices/LNXPOWER:11/status 1
/sys/bus/acpi/devices/LNXPOWER:12/status 1
/sys/bus/acpi/devices/LNXPOWER:13/status 1
/sys/bus/acpi/devices/LNXPOWER:14/status 1
/sys/bus/acpi/devices/LNXPOWER:15/status 1
/sys/bus/acpi/devices/LNXPOWER:16/status 1
/sys/bus/acpi/devices/PNP0103:00/status 15
/sys/bus/acpi/devices/PNP0501:00/status 15
/sys/bus/acpi/devices/PNP0C02:02/status 15
/sys/bus/acpi/devices/PNP0C02:04/status 3
/sys/bus/acpi/devices/PNP0C02:06/status 3
/sys/bus/acpi/devices/PNP0C04:00/status 31
/sys/bus/acpi/devices/PNP0C0C:00/status 15
/sys/bus/acpi/devices/PNP0C0E:00/status 11
/sys/bus/acpi/devices/PNP0C0F:00/status 9
/sys/bus/acpi/devices/PNP0C0F:01/status 9
/sys/bus/acpi/devices/PNP0C0F:02/status 9
/sys/bus/acpi/devices/PNP0C0F:03/status 9
/sys/bus/acpi/devices/PNP0C0F:04/status 9
/sys/bus/acpi/devices/PNP0C0F:05/status 9
/sys/bus/acpi/devices/PNP0C0F:06/status 9
/sys/bus/acpi/devices/PNP0C0F:07/status 9
/sys/bus/acpi/devices/device:68/status 15
/sys/bus/acpi/devices/device:7a/status 11
!!Kernel Information
!!------------------
Kernel release: 5.9.11-3-MANJARO
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k5.9.11-3-MANJARO
Library version: 1.2.4
Utilities version: 1.2.4
!!Loaded ALSA modules
!!-------------------
snd_hdsp
snd_usb_audio
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [DSP ]: H-DSP - Hammerfall DSP
RME Hammerfall HDSP 9632 at 0xf7000000, irq 18
1 [U0x46d0x821 ]: USB-Audio - USB Device 0x46d:0x821
USB Device 0x46d:0x821 at usb-0000:00:14.0-7, high speed
!!PCI Soundcards installed in the system
!!--------------------------------------
04:00.0 Multimedia audio controller [0401]: Xilinx Corporation RME Hammerfall DSP [10ee:3fc5] (rev 9b)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
!!Loaded sound module options
!!---------------------------
!!Module: snd_hdsp
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
!!Module: snd_usb_audio
autoclock : Y
delayed_register : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
ignore_ctl_error : N
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
skip_validation : N
use_vmalloc : Y
vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
!!USB Mixer information
!!---------------------
--startcollapse--
USB Mixer: usb_id=0x046d0821, ctrlif=0, ctlerr=0
Card: USB Device 0x46d:0x821 at usb-0000:00:14.0-7, high speed
Unit: 5
Control: name="Mic Capture Volume", index=0
Info: id=5, control=2, cmask=0x0, channels=1, type="S16"
Volume: min=-18176, max=-4864, dBmin=-7100, dBmax=-1900
Unit: 5
Control: name="Mic Capture Switch", index=0
Info: id=5, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 6 Dec 25 10:51 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 8 Dec 25 10:51 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 5 Dec 25 10:51 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 4 Dec 25 10:51 /dev/snd/midiC0D0
crw-rw----+ 1 root audio 116, 3 Dec 25 10:53 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 2 Dec 26 10:54 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 7 Dec 25 10:53 /dev/snd/pcmC1D0c
crw-rw----+ 1 root audio 116, 1 Dec 25 10:51 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Dec 25 10:51 /dev/snd/timer
/dev/snd/by-id:
total 0
drwxr-xr-x 2 root root 60 Dec 25 10:51 .
drwxr-xr-x 4 root root 260 Dec 25 10:51 ..
lrwxrwxrwx 1 root root 12 Dec 25 10:51 usb-046d_0821_CE7141A0-00 -> ../controlC1
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Dec 25 10:51 .
drwxr-xr-x 4 root root 260 Dec 25 10:51 ..
lrwxrwxrwx 1 root root 12 Dec 25 10:51 pci-0000:00:14.0-usb-0:7:1.0 -> ../controlC1
lrwxrwxrwx 1 root root 12 Dec 25 10:51 pci-0000:04:00.0 -> ../controlC0
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: DSP [Hammerfall DSP], device 0: RME Hammerfall HDSP 9632 [RME Hammerfall HDSP 9632]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: DSP [Hammerfall DSP], device 0: RME Hammerfall HDSP 9632 [RME Hammerfall HDSP 9632]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: U0x46d0x821 [USB Device 0x46d:0x821], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card DSP
Card hw:0 'DSP'/'RME Hammerfall HDSP 9632 at 0xf7000000, irq 18'
Mixer name : 'Xilinx FPGA'
Components : ''
Controls : 31
Simple ctrls : 24
Simple mixer control 'Line Out',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Phones Gain',0
Capabilities: enum
Items: '0 dB' '-6 dB' '-12 dB'
Item0: '0 dB'
Simple mixer control 'IEC958 Emphasis Bit',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Input Connector',0
Capabilities: enum
Items: 'Optical' 'Coaxial' 'Internal' 'AES'
Item0: 'Coaxial'
Simple mixer control 'IEC958 Non-audio Bit',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Output also on ADAT1',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Professional Bit',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'AD Gain',0
Capabilities: enum
Items: '-10 dBV' '+4 dBu' 'Lo Gain'
Item0: '+4 dBu'
Simple mixer control 'ADAT Lock Status',1
Capabilities: enum
Items: 'No Lock' 'Lock' 'Sync'
Item0: 'No Lock'
Simple mixer control 'ADAT Sync Lock Status',0
Capabilities: enum
Items: 'No Lock' 'Lock' 'Sync'
Item0: 'No Lock'
Simple mixer control 'Analog Extension Board',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'AutoSync Reference',0
Capabilities: enum
Items: 'Word' 'ADAT Sync' 'IEC958' 'None' 'ADAT1' 'ADAT2' 'ADAT3'
Item0: 'None'
Simple mixer control 'DA Gain',0
Capabilities: enum
Items: 'Hi Gain' '+4 dBu' '-10 dbV'
Item0: '+4 dBu'
Simple mixer control 'DDS Sample Rate Offset',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: -5000 - 5000
Mono: 0 [50%]
Simple mixer control 'External Rate',0
Capabilities: enum
Items: '32000' '44100' '48000' '64000' '88200' '96000' 'None' '128000' '176400' '192000'
Item0: 'None'
Simple mixer control 'Preferred Sync Reference',0
Capabilities: enum
Items: 'Word' 'IEC958' 'ADAT1'
Item0: 'ADAT1'
Simple mixer control 'SPDIF Lock Status',0
Capabilities: enum
Items: 'No Lock' 'Lock' 'Sync'
Item0: 'No Lock'
Simple mixer control 'SPDIF Sample Rate',0
Capabilities: enum
Items: '32000' '44100' '48000' '64000' '88200' '96000' 'None' '128000' '176400' '192000'
Item0: 'None'
Simple mixer control 'Sample Clock Source',0
Capabilities: enum
Items: 'AutoSync' 'Internal 32.0 kHz' 'Internal 44.1 kHz' 'Internal 48.0 kHz' 'Internal 64.0 kHz' 'Internal 88.2 kHz' 'Internal 96.0 kHz' 'Internal 128 kHz' 'Internal 176.4 kHz' 'Internal 192.0 KHz'
Item0: 'Internal 48.0 kHz'
Simple mixer control 'Sample Clock Source Locking',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'System Clock Mode',0
Capabilities: enum
Items: 'Master' 'Slave'
Item0: 'Master'
Simple mixer control 'System Sample Rate',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 0
Mono: 0 [0%]
Simple mixer control 'Word Clock Lock Status',0
Capabilities: enum
Items: 'No Lock' 'Lock' 'Sync'
Item0: 'No Lock'
Simple mixer control 'XLR Breakout Cable',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
!!-------Mixer controls for card U0x46d0x821
Card hw:1 'U0x46d0x821'/'USB Device 0x46d:0x821 at usb-0000:00:14.0-7, high speed'
Mixer name : 'USB Mixer'
Components : 'USB046d:0821'
Controls : 4
Simple ctrls : 1
Simple mixer control 'Mic',0
Capabilities: cvolume cvolume-joined cswitch cswitch-joined
Capture channels: Mono
Limits: Capture 0 - 52
Mono: Capture 46 [88%] [-25.00dB] [on]
!!Alsactl output
!!--------------
--startcollapse--
state.DSP {
control.1 {
iface PCM
name 'IEC958 Playback Default'
value '0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.2 {
iface PCM
name 'IEC958 Playback PCM Stream'
value '0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write inactive'
type IEC958
count 1
}
}
control.3 {
iface PCM
name 'IEC958 Playback Con Mask'
value '3b00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface PCM
name 'IEC958 Playback Pro Mask'
value '1f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.5 {
iface HWDEP
name Mixer
value.0 0
value.1 0
value.2 0
comment {
access 'read write volatile'
type INTEGER
count 3
range '0 - 65536 (step 1)'
}
}
control.6 {
iface MIXER
name 'IEC958 Input Connector'
value Coaxial
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Optical
item.1 Coaxial
item.2 Internal
item.3 AES
}
}
control.7 {
iface MIXER
name 'IEC958 Output also on ADAT1'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Professional Bit'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Emphasis Bit'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Non-audio Bit'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.11 {
iface MIXER
name 'Sample Clock Source'
value 'Internal 48.0 kHz'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 AutoSync
item.1 'Internal 32.0 kHz'
item.2 'Internal 44.1 kHz'
item.3 'Internal 48.0 kHz'
item.4 'Internal 64.0 kHz'
item.5 'Internal 88.2 kHz'
item.6 'Internal 96.0 kHz'
item.7 'Internal 128 kHz'
item.8 'Internal 176.4 kHz'
item.9 'Internal 192.0 KHz'
}
}
control.12 {
iface MIXER
name 'Sample Clock Source Locking'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.13 {
iface MIXER
name 'System Clock Mode'
value Master
comment {
access read
type ENUMERATED
count 1
item.0 Master
item.1 Slave
}
}
control.14 {
iface MIXER
name 'Preferred Sync Reference'
value ADAT1
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Word
item.1 IEC958
item.2 ADAT1
}
}
control.15 {
iface MIXER
name 'AutoSync Reference'
value None
comment {
access read
type ENUMERATED
count 1
item.0 Word
item.1 'ADAT Sync'
item.2 IEC958
item.3 None
item.4 ADAT1
item.5 ADAT2
item.6 ADAT3
}
}
control.16 {
iface MIXER
name 'SPDIF Sample Rate'
value None
comment {
access read
type ENUMERATED
count 1
item.0 '32000'
item.1 '44100'
item.2 '48000'
item.3 '64000'
item.4 '88200'
item.5 '96000'
item.6 None
item.7 '128000'
item.8 '176400'
item.9 '192000'
}
}
control.17 {
iface MIXER
name 'System Sample Rate'
value 48000
comment {
access read
type INTEGER
count 1
range '0 - 0'
}
}
control.18 {
iface MIXER
name 'External Rate'
value None
comment {
access read
type ENUMERATED
count 1
item.0 '32000'
item.1 '44100'
item.2 '48000'
item.3 '64000'
item.4 '88200'
item.5 '96000'
item.6 None
item.7 '128000'
item.8 '176400'
item.9 '192000'
}
}
control.19 {
iface MIXER
name 'Word Clock Lock Status'
value 'No Lock'
comment {
access 'read volatile'
type ENUMERATED
count 1
item.0 'No Lock'
item.1 Lock
item.2 Sync
}
}
control.20 {
iface MIXER
name 'SPDIF Lock Status'
value 'No Lock'
comment {
access 'read volatile'
type ENUMERATED
count 1
item.0 'No Lock'
item.1 Lock
item.2 Sync
}
}
control.21 {
iface MIXER
name 'ADAT Sync Lock Status'
value 'No Lock'
comment {
access 'read volatile'
type ENUMERATED
count 1
item.0 'No Lock'
item.1 Lock
item.2 Sync
}
}
control.22 {
iface MIXER
name 'Line Out'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.23 {
iface CARD
name 'Precise Pointer'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.24 {
iface CARD
name 'Use Midi Tasklet'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.25 {
iface MIXER
name 'ADAT Lock Status'
index 1
value 'No Lock'
comment {
access 'read volatile'
type ENUMERATED
count 1
item.0 'No Lock'
item.1 Lock
item.2 Sync
}
}
control.26 {
iface MIXER
name 'DA Gain'
value '+4 dBu'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Hi Gain'
item.1 '+4 dBu'
item.2 '-10 dbV'
}
}
control.27 {
iface MIXER
name 'AD Gain'
value '+4 dBu'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '-10 dBV'
item.1 '+4 dBu'
item.2 'Lo Gain'
}
}
control.28 {
iface MIXER
name 'Phones Gain'
value '0 dB'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '0 dB'
item.1 '-6 dB'
item.2 '-12 dB'
}
}
control.29 {
iface MIXER
name 'XLR Breakout Cable'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.30 {
iface MIXER
name 'DDS Sample Rate Offset'
value 0
comment {
access 'read write'
type INTEGER
count 1
range '-5000 - 5000'
}
}
control.31 {
iface MIXER
name 'Analog Extension Board'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
}
state.U0x46d0x821 {
control.1 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.2 {
iface MIXER
name 'Mic Capture Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.3 {
iface MIXER
name 'Mic Capture Volume'
value 46
comment {
access 'read write'
type INTEGER
count 1
range '0 - 52'
dbmin -7100
dbmax -1900
dbvalue.0 -2500
}
}
control.4 {
iface CARD
name 'Keep Interface'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
aesni_intel
agpgart
asus_wmi
battery
cdrom
cec
coretemp
crc16
crc32_pclmul
crc32c_generic
crc32c_intel
crct10dif_pclmul
cryptd
crypto_simd
crypto_user
drm
drm_kms_helper
e1000e
ebtable_filter
ebtables
ee1004
eeepc_wmi
evdev
ext4
fb_sys_fops
fuse
ghash_clmulni_intel
glue_helper
hid
hid_generic
i2c_algo_bit
i2c_i801
i2c_smbus
i915
iTCO_vendor_support
iTCO_wdt
input_leds
intel_cstate
intel_gtt
intel_pmc_bxt
intel_powerclamp
intel_rapl_common
intel_rapl_msr
intel_uncore
ip6_tables
ip6table_filter
ip_tables
iptable_filter
irqbypass
jbd2
joydev
kvm
kvm_intel
loop
mac_hid
mbcache
mc
mei
mei_hdcp
mei_me
mei_wdt
mousedev
mxm_wmi
pcspkr
rapl
rc_core
rfkill
snd
snd_hdsp
snd_hwdep
snd_pcm
snd_rawmidi
snd_seq_device
snd_timer
snd_usb_audio
snd_usbmidi_lib
soundcore
sparse_keymap
squashfs
sr_mod
syscopyarea
sysfillrect
sysimgblt
uas
uinput
usb_serial_simple
usb_storage
usbhid
usblp
uvcvideo
videobuf2_common
videobuf2_memops
videobuf2_v4l2
videobuf2_vmalloc
videodev
wmi
wmi_bmof
x86_pkg_temp_thermal
x_tables
xhci_hcd
xhci_pci
!!ALSA/HDA dmesg
!!--------------
