I upgraded my hardware more than a month ago and have been using Windows 10 since (dual boot):
I am using the same 4 SATA drives as before: Win10 system (C:), Win10 data (D:), Linux (a Toshiba HDWE150) and a shared SSD. GRUB and Windows boot manager are on the linux drive. I was previously using kernel 6.6 and have tried both that and 6.14.
To cut a long story short, Win10 gave no problems but the UEFI thought that “ubuntu” (GRUB?) was on D:. After re-installing and updating GRUB plus updating Manjaro, the UEFI now recognises both GRUB (labelled as “Manjaro”) and the Windows boot manager on the linux drive. However, when I boot into Manjaro
I can run Manjaro and access the linux drive from an up-to-date live ISO. I have tried all of the repair options from the ISO with no luck.
The black screen made me think of a GPU driver issue but MHWD shows that video-linux is installed and Inxi shows that the RX7600 is recognised as such.
I would greatly appreciate any help if there is something obvious that I’m missing. I’m still best described as a complete beginner when it come to Linux/Manjaro. I couldn’t even get the Inxi info (which scrolls off the top of the terminal screen) over to Windows so I could post it here.
You can redirect it to a file, and save the file somewhere accessible from windows.
inxi -zv8 > /path/to/file
Better yet you can use a live USB to run inxi and post it here.
1 Like
To get info on the HDD Manjaro installation, rather than the live USB version, I right-clicked the Toshiba 5.0 Tb volume in Thunar, selected “Terminal” and ran inxi -zv8 from that terminal. I hope this is correct, though I’m not sure where it gets kernel 6.12 from.
System:
Kernel: 6.12.4-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=manjaro misolabel=MANJARO_XFCE_2421 quiet
systemd.show_status=1 splash apparmor=1 security=apparmor driver=free
nouveau.modeset=1 i915.modeset=1 radeon.modeset=1
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.43 wm: xfwm4 v: 4.18.0
with: xfce4-panel tools: xfce4-screensaver vt: 7 dm: LightDM v: 1.32.0
Distro: Manjaro base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING B650-PLUS v: Rev 1.xx
serial: <superuser required> part-nu: SKU uuid: <superuser required>
UEFI: American Megatrends v: 3035 date: 09/05/2024
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 32 GiB available: 30.98 GiB used: 1.8 GiB (5.8%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 128 GiB slots: 4 modules: 2 EC: None
max-module-size: 32 GiB note: est.
Device-1: Channel-A DIMM 0 type: no module installed
Device-2: Channel-A DIMM 1 type: DDR5 detail: synchronous unbuffered
(unregistered) size: 16 GiB speed: spec: 5600 MT/s actual: 5200 MT/s
volts: note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
manufacturer: Crucial Technology part-no: CP16G60C36U5B.M8D1
serial: <filter>
Device-3: Channel-B DIMM 0 type: no module installed
Device-4: Channel-B DIMM 1 type: DDR5 detail: synchronous unbuffered
(unregistered) size: 16 GiB speed: spec: 5600 MT/s actual: 5200 MT/s
volts: note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
manufacturer: Crucial Technology part-no: CP16G60C36U5B.M8D1
serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 7 7700X bits: 64 type: MT MCP arch: Zen 4 gen: 4
level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
model-id: 0x61 (97) stepping: 2 microcode: 0xA601209
Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2
smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 8 MiB
desc: 8x1024 KiB L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 545 min/max: 545/5573 boost: enabled scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 545 2: 545 3: 545
4: 545 5: 545 6: 545 7: 545 8: 545 9: 545 10: 545 11: 545 12: 545 13: 545
14: 545 15: 545 16: 545 bogomips: 143790
Flags: 3dnowprefetch abm adx aes amd_lbr_pmc_freeze amd_lbr_v2 aperfmperf
apic arat avic avx avx2 avx512_bf16 avx512_bitalg avx512_vbmi2
avx512_vnni avx512_vpopcntdq avx512bw avx512cd avx512dq avx512f
avx512ifma avx512vbmi avx512vl bmi1 bmi2 bpext cat_l3 cdp_l3 clflush
clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm
cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de
decodeassists erms extapic extd_apicid f16c flush_l1d flushbyasid fma fpu
fsgsbase fsrm fxsr fxsr_opt gfni ht hw_pstate ibpb ibrs ibrs_enhanced ibs
invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw
overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core
perfctr_llc perfctr_nb perfmon_v2 pfthreshold pge pku pni popcnt pse
pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp
succor svm_lock syscall tce topoext tsc tsc_scale umip user_shstk
v_spec_ctrl vaes vgif vmcb_clean vme vmmcall vnmi vpclmulqdq wbnoinvd wdt
x2avic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves xtopology
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow mitigation: Safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
conditional; STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected;
BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 33 [Radeon RX 7600/7600
XT/7600M XT/7600S/7700S / PRO W7600] vendor: ASUSTeK driver: amdgpu
v: kernel arch: RDNA-3 code: Navi-33 built: 2023+ pcie: gen: 4
speed: 16 GT/s lanes: 8 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3,
Writeback-1 bus-ID: 03:00.0 chip-ID: 1002:7480 class-ID: 0300
Display: x11 server: X.org v: 1.21.1.14 compositor: xfwm4 v: 4.18.0
driver: X: loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa
dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: BenQ XL2420T serial: <filter>
built: 2011 res: 1920x1080 hz: 60 dpi: 94 gamma: 1.2 chroma: red: x: 0.651
y: 0.329 green: x: 0.329 y: 0.624 blue: x: 0.149 y: 0.051 white: x: 0.314
y: 0.329 size: 521x293mm (20.51x11.54") diag: 609mm (24") ratio: 16:9
modes: 1920x1080, 1680x1050, 1280x1024, 1280x800, 1152x864, 1280x720,
1024x768, 832x624, 800x600, 640x480, 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.2.8-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 7600 (radeonsi navi33
LLVM 18.1.8 DRM 3.59 6.12.4-1-MANJARO) device-ID: 1002:7480
memory: 7.81 GiB unified: no
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 31 HDMI/DP Audio
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 8
bus-ID: 03:00.1 chip-ID: 1002:ab30 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 0d:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.12.4-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 09:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Info: services: NetworkManager,systemd-timesyncd
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 7.56 TiB used: 2.46 TiB (32.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000DM001-9YN164
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: CC4C scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: HDWE150 size: 4.55 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s tech: HDD
rpm: 7200 serial: <filter> fw-rev: FP1R scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 840 Series
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 8B0Q scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Samsung model: HD103SJ
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: 0001 scheme: MBR
ID-5: /dev/sde maj-min: 8:64 vendor: Toshiba model: TransMemory
size: 57.74 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
fw-rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Message: No optical or floppy data found.
Partition:
ID-1: /run/media/manjaro/24ff66bb-fce1-4b9d-b8a1-543f9201bd38
raw-size: 4.55 TiB size: 4.51 TiB (99.19%) used: 2.46 TiB (54.6%) fs: ext4
dev: /dev/sdb2 maj-min: 8:18 label: N/A
uuid: 24ff66bb-fce1-4b9d-b8a1-543f9201bd38
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 1.82 TiB fs: ntfs label: W10-ST2000
uuid: DA02D5E002D5C225
ID-2: /dev/sda2 maj-min: 8:2 size: 550 MiB fs: ntfs label: N/A
uuid: C0AAFAC7AAFAB94C
ID-3: /dev/sdb1 maj-min: 8:17 size: 300 MiB fs: vfat label: N/A
uuid: DC0D-0B6D
ID-4: /dev/sdc1 maj-min: 8:33 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-5: /dev/sdc2 maj-min: 8:34 size: 232.87 GiB fs: ntfs label: 250GbSSD
uuid: 50C4D522C4D50ADC
ID-6: /dev/sdd1 maj-min: 8:49 size: 931.51 GiB fs: ntfs label: SS-HD103SJ
uuid: 94909F9E909F8580
ID-7: /dev/sde1 maj-min: 8:65 size: 3.63 GiB fs: iso9660
ID-8: /dev/sde2 maj-min: 8:66 size: 4 MiB fs: vfat label: MISO_EFI
uuid: 9D59-BEAA
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-2:2 info: Toshiba TransMemory-Mini / Kingston DataTraveler
2.0 Stick type: mass storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 200mA
chip-ID: 0930:6544 class-ID: 0806 serial: <filter>
Device-2: 1-6:3 info: Logitech G502 SE HERO Gaming Mouse type: mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c08b class-ID: 0300
serial: <filter>
Device-3: 1-11:4 info: ASUSTek AURA LED Controller type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 16mA chip-ID: 0b05:19af class-ID: 0300
serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 5 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-1:2 info: Cypress type: keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 98mA chip-ID: 04b4:f02f class-ID: 0300
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-6: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-7: 7-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-8: 8-0:1 info: Linux Foundation 3.0 root hub ports: N/A rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 41.1 C mobo: 30.0 C gpu: amdgpu temp: 33.0 C
mem: 29.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 0
Repos:
Packages: pm: pacman pkgs: 1117 libs: 323 tools: pamac pm: flatpak pkgs: 0
Active pacman repo servers in: /etc/pacman.d/mirrorlist
Processes:
CPU top: 5 of 323
1: cpu: 4.0% command: Thunar pid: 1769 mem: 57.5 MiB (0.1%)
2: cpu: 3.0% command: Xorg pid: 1587 mem: 137.3 MiB (0.4%)
3: cpu: 0.6% command: gpg-agent pid: 1061 mem: 3.93 MiB (0.0%)
4: cpu: 0.6% command: zsh pid: 2793 mem: 7.94 MiB (0.0%)
5: cpu: 0.4% command: xfce4-terminal pid: 2393 mem: 65.4 MiB (0.2%)
Memory top: 5 of 323
1: mem: 137.3 MiB (0.4%) command: Xorg pid: 1587 cpu: 3.0%
2: mem: 134.2 MiB (0.4%) command: xfwm4 pid: 1737 cpu: 0.3%
3: mem: 79.4 MiB (0.2%) command: manjaro-hello started-by: python3
pid: 1836 cpu: 0.1%
4: mem: 72.0 MiB (0.2%) command: xfce4-session pid: 1652 cpu: 0.0%
5: mem: 65.4 MiB (0.2%) command: xfce4-terminal pid: 2393 cpu: 0.4%
Info:
Processes: 323 Power: uptime: 6m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.35 GiB
services: upowerd,xfce4-power-manager Init: systemd v: 256
default: graphical tool: systemctl
Compilers: N/A Shell: Zsh v: 5.9 running-in: xfce4-terminal inxi: 3.3.36
/run/me/m/24ff66bb-fce1-4b9d-b8a1-543f9201bd38 ✔
Only partition /dev/sdb1 seems to be detected (looks like your ESP). I guess your Linux was/is on /dev/sdb2 ?
Boot into a live ISO and post output of
sudo fdisk -l
sudo blkid
Hello Wollie,
Yes, Manjaro is on sdb2, which is on the Toshiba/Linux drive. When I run the recovery program from the ISO usb I see this:
Boot mode: EFI
Selected partition: /dev/sdb2
I’ll post the result of those commands you gave in a few minutes…
sudo fdisk -l ✔
Disk /dev/sda: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk model: ST2000DM001-9YN1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 67D172F2-B71E-42F0-9E90-D8AC26BAC3B7
Device Start End Sectors Size Type
/dev/sda1 2048 3905900291 3905898244 1.8T Microsoft basic data
/dev/sda2 3905900544 3907026943 1126400 550M Windows recovery environment
Disk /dev/sdb: 4.55 TiB, 5000981078016 bytes, 9767541168 sectors
Disk model: TOSHIBA HDWE150
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 81B2341B-11F0-1744-9510-542334150541
Device Start End Sectors Size Type
/dev/sdb1 4096 618495 614400 300M EFI System
/dev/sdb2 618496 9767536064 9766917569 4.5T Linux filesystem
Disk /dev/sdc: 232.89 GiB, 250059350016 bytes, 488397168 sectors
Disk model: Samsung SSD 840
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 53092326-202F-4277-AB8B-5CC0D9443BD3
Device Start End Sectors Size Type
/dev/sdc1 34 32767 32734 16M Microsoft reserved
/dev/sdc2 32768 488394751 488361984 232.9G Microsoft basic data
Disk /dev/sdd: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: SAMSUNG HD103SJ
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x3478d525
Device Boot Start End Sectors Size Id Type
/dev/sdd1 63 1953520064 1953520002 931.5G 7 HPFS/NTFS/exFAT
Disk /dev/sde: 57.74 GiB, 62002298880 bytes, 121098240 sectors
Disk model: TransMemory
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/sde1 * 64 7615071 7615008 3.6G 0 Empty
/dev/sde2 7615072 7623263 8192 4M ef EFI (FAT-12/16/32)
Disk /dev/loop0: 67.74 MiB, 71032832 bytes, 138736 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 1.13 GiB, 1213853696 bytes, 2370808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 1.46 GiB, 1571356672 bytes, 3069056 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 858.86 MiB, 900575232 bytes, 1758936 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
sudo blkid ✔
/dev/loop1: BLOCK_SIZE="262144" TYPE="squashfs"
/dev/sdd1: LABEL="SS-HD103SJ" BLOCK_SIZE="512" UUID="94909F9E909F8580" TYPE="ntfs" PARTUUID="3478d525-01"
/dev/sdb2: UUID="24ff66bb-fce1-4b9d-b8a1-543f9201bd38" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="2a7b6b76-6428-324a-bdd7-07bc7f617e32"
/dev/sdb1: UUID="DC0D-0B6D" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="5904c21e-0451-cc47-babb-6210c85920b8"
/dev/loop2: BLOCK_SIZE="262144" TYPE="squashfs"
/dev/loop0: BLOCK_SIZE="262144" TYPE="squashfs"
/dev/sde2: SEC_TYPE="msdos" LABEL_FATBOOT="MISO_EFI" LABEL="MISO_EFI" UUID="9D59-BEAA" BLOCK_SIZE="512" TYPE="vfat"
/dev/sde1: BLOCK_SIZE="2048" UUID="2024-12-16-11-22-45-00" LABEL="MANJARO_XFCE_2421" TYPE="iso9660"
/dev/sdc2: LABEL="250GbSSD" BLOCK_SIZE="512" UUID="50C4D522C4D50ADC" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="b14d6930-d6ab-4004-a1a6-fd17c8ac2f92"
/dev/sda2: BLOCK_SIZE="512" UUID="C0AAFAC7AAFAB94C" TYPE="ntfs" PARTUUID="25e722fd-692f-4e22-90c7-ff889714b91d"
/dev/sda1: LABEL="W10-ST2000" BLOCK_SIZE="512" UUID="DA02D5E002D5C225" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="2f435933-de75-4bfe-9cdf-cc0568ccfb3a"
/dev/loop3: BLOCK_SIZE="262144" TYPE="squashfs"
/dev/sdc1: PTTYPE="PMBR" PARTLABEL="Microsoft reserved partition" PARTUUID="249d8c7f-8d16-40b5-9445-77b5fcfb6010"
_p9k_fetch_cwd:4: Failed to get current directory: path invalid
Have you looked into this already:
When we have problems gaining access to our systems it is difficult to gather information, let alone fix any problems. Here we will cover common causes and solutions to ‘manjaro wont boot’.
I tried to fix it but ended up losing both Windows and Manjaro, so had to reinstall both.
Thanks for the pointers, but to be honest they just enabled me to get myself into more trouble! Feel free to mark the thread as closed.