My Bluetooth mouse does not move

[Griso]

My mouse (HP 240 Bluetooth) is connected and the power percentage is shown, but I cannot move the cursor.

[andreas85]

You forgot to mention which DE you are using

Welcome to Manjaro!

1. Please read the information behind this link. It will help you to post necessary information.

[HowTo] Request support

Difficulty: ★☆☆☆☆ Strong of its many members, the Manjaro support forum can provide you help whenever you have an issue with your Manjaro installation. But in order to work efficiently, we shall also ask you to follow three major points. Provide context Simply signaling an issue is rarely enough to understand how it occurred. It is thus important to provide details on how it happened: Detail prior actions leading to the issue. List solutions and guides you already tried, with links when…

2. Please press the three dots … below your post and then press the

• If you give us information about your system, we can see what we’re talking about and make better suggestions.
• You can do this by using inxi in a terminal or in console.

sudo inxi --admin --verbosity=7 --filter --no-host --width

• Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
• Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.

3. Copy the output from inxi (including the command) and paste it into your post.

• To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

[HowTo] Post command output and file content as formatted text

Difficulty: ★☆☆☆☆ Formatting differences Discourse – this forum’s engine – uses Markdown to format its posts, and removes “unnecessary” whitespace. Terminal commands often produce output formatted so that they are better readable by the user, taking advantage of the monospaced font used. Programming code often rely on indentation to make it more readable. Using preformatting in Markdown Markdown includes a pattern to provide preformatting when necessary. You only need to put the part to f…

Have you already for your problem in the forum ? (Wisdom lies in asking → listening → reading )

[Griso]

System:
  Kernel: 6.1.62-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=fcd15d5d-4b60-402e-be78-6142cd443255 rw nouveau.modeset=0 quiet
    resume=UUID=fc6c4c4b-6c61-4fa7-a334-ab1c856bfdf5 udev.log_priority=3
  Desktop: KDE Plasma v: 5.27.9 tk: Qt v: 5.15.11 info: docker wm: kwin_x11
    dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Dell product: Precision 5570 v: N/A serial: <filter>
    Chassis: type: 10 serial: <filter>
  Mobo: Dell model: 02JH00 v: A00 serial: <filter> UEFI: Dell v: 1.16.0
    date: 07/07/2023
Battery:
  ID-1: BAT0 charge: 23.3 Wh (37.7%) condition: 61.8/84.3 Wh (73.3%)
    volts: 11.9 min: 11.4 model: BYD DELL M59JH25 type: Li-poly serial: <filter>
    status: charging
Memory:
  System RAM: total: 16 GiB available: 15.3 GiB used: 5.87 GiB (38.4%)
    igpu: 64 MiB
  Array-1: capacity: 64 GiB slots: 2 modules: 2 EC: None
    max-module-size: 32 GiB note: est.
  Device-1: DIMM A type: DDR5 detail: synchronous size: 8 GiB
    speed: 4800 MT/s volts: curr: 1.1 width (bits): data: 64 total: 64
    manufacturer: 80AD000080AD part-no: HMCG66MEBSA092N serial: <filter>
  Device-2: DIMM B type: DDR5 detail: synchronous size: 8 GiB
    speed: 4800 MT/s volts: curr: 1.1 width (bits): data: 64 total: 64
    manufacturer: 80AD000080AD part-no: HMCG66MEBSA092N serial: <filter>
CPU:
  Info: model: 12th Gen Intel Core i7-12700H socket: U3E1 bits: 64
    type: MST AMCP arch: Alder Lake gen: core 12 level: v3 note: check
    built: 2021+ process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154)
    stepping: 3 microcode: 0x42C
  Topology: cpus: 1x cores: 14 mt: 6 tpc: 2 st: 8 threads: 20 smt: enabled
    cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32 KiB, 8x64 KiB
    L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB desc: 1x24 MiB
  Speed (MHz): avg: 690 high: 1800 min/max: 400/4600:4700:3500
    base/boost: 1980/4700 scaling: driver: intel_pstate governor: performance
    volts: 0.8 V ext-clock: 100 MHz cores: 1: 1004 2: 818 3: 1094 4: 401
    5: 1800 6: 400 7: 1800 8: 400 9: 400 10: 400 11: 490 12: 400 13: 400
    14: 427 15: 1574 16: 400 17: 400 18: 400 19: 400 20: 400 bogomips: 107560
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
    bts clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16 cx8
    de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
    flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp hwp_act_window
    hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt ida intel_pt
    invpcid lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b movdiri
    msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pclmulqdq pdcm pdpe1gb pebs
    pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed rdtscp rep_good
    sdbg sep serialize sha_ni smap smep smx split_lock_detect ss ssbd sse sse2
    sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
    tsc_deadline_timer tsc_known_freq umip vaes vme vmx vnmi vpclmulqdq vpid
    waitpkg x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Alder Lake-P GT2 [Iris Xe Graphics] vendor: Dell driver: i915
    v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports:
    active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1 bus-ID: 0000:00:02.0
    chip-ID: 8086:46a6 class-ID: 0300
  Device-2: NVIDIA GA107GLM [RTX A1000 Laptop GPU] vendor: Dell
    driver: nvidia v: 535.54.03 alternate: nouveau,nvidia_drm non-free: 545.xx+
    status: current (as of 2023-11; EOL~2026-12-xx) arch: Ampere code: GAxxx
    process: TSMC n7 (7nm) built: 2020-2023 bus-ID: 0000:01:00.0
    chip-ID: 10de:25b9 class-ID: 0302
  Device-3: Microdia Integrated_Webcam_HD driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-6:2 chip-ID: 0c45:6a15
    class-ID: 0e02
  Display: server: X.Org v: 21.1.9 compositor: kwin_x11 driver: X:
    loaded: modesetting,nvidia unloaded: nouveau alternate: fbdev,nv,vesa
    dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x317mm (20.00x12.48")
    s-diag: 599mm (23.57")
  Monitor-1: eDP-1 model: LG Display 0x06b3 built: 2021 res: 1920x1200 hz: 60
    dpi: 145 gamma: 1.2 size: 336x210mm (13.23x8.27") diag: 396mm (15.6")
    ratio: 16:10 modes: 1920x1200
  API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
    drv: nvidia device: 1 drv: iris device: 3 drv: swrast gbm: drv: iris
    surfaceless: drv: nvidia x11: drv: iris inactive: wayland,device-2
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 23.1.9-manjaro1.1
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (ADL GT2)
    device-ID: 8086:46a6 memory: 14.94 GiB unified: yes
  API: Vulkan v: 1.3.269 layers: 1 device: 0 type: discrete-gpu name: NVIDIA
    RTX A1000 Laptop GPU driver: nvidia v: 535.54.03 device-ID: 10de:25b9
    surfaces: xcb,xlib device: 1 type: integrated-gpu name: Intel Graphics
    (ADL GT2) driver: mesa intel v: 23.1.9-manjaro1.1 device-ID: 8086:46a6
    surfaces: xcb,xlib
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Dell
    driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_tgl
    bus-ID: 0000:00:1f.3 chip-ID: 8086:51c8 class-ID: 0403
  API: ALSA v: k6.1.62-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.84 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 0000:00:14.3 chip-ID: 8086:51f0 class-ID: 0280
  IF: wlp0s20f3 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> virtual: proto kernel_ll scope: link
  IF-ID-2: veth4f75dde state: up speed: 10000 Mbps duplex: full mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
    v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:467f rev: class-ID: 0104
Drives:
  Local Storage: total: 476.94 GiB used: 110.39 GiB (23.1%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: PM9A1 NVMe 512GB
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 36308229 temp: 41.9 C
    scheme: GPT
  SMART: yes health: PASSED on: 44d 9h cycles: 1,519
    read-units: 21,416,607 [10.9 TB] written-units: 60,649,095 [31.0 TB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 200 GiB size: 195.8 GiB (97.90%) used: 109.07 GiB (55.7%)
    fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A
    uuid: fcd15d5d-4b60-402e-be78-6142cd443255
  ID-2: /boot/efi raw-size: 815 MiB size: 811 MiB (99.51%)
    used: 70.6 MiB (8.7%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: ESP uuid: 4A33-B00C
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
    compressor: zstd max-pool: 20%
  ID-1: swap-1 type: partition size: 20 GiB used: 1.25 GiB (6.3%)
    priority: -2 dev: /dev/nvme0n1p4 maj-min: 259:4 label: N/A
    uuid: fc6c4c4b-6c61-4fa7-a334-ab1c856bfdf5
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 256.14 GiB fs: ntfs label: N/A
    uuid: 7A46F27246F22F0F
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-6:2 info: Microdia Integrated_Webcam_HD type: video
    driver: uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 500mA chip-ID: 0c45:6a15 class-ID: 0e02
  Device-2: 3-9:7 info: Shenzhen Goodix USB2.0 MISC type: <vendor specific>
    driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 100mA chip-ID: 27c6:63ac class-ID: ef00 serial: <filter>
  Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 54.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 417 Uptime: 1d 9m wakeups: 0 Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: pm: pacman pkgs: 1657 libs: 431 tools: pamac,yay pm: flatpak
  pkgs: 0 Shell: Sudo (sudo) v: 1.9.15p2 default: Zsh v: 5.9
  running-in: konsole inxi: 3.3.31