Multiple Display System Management - Asus Zenbook Duo

Hello all,

I got some feedback on other calibration issues with my system detailed in this post here:

https://forum.manjaro.org/t/multiple-display-management-asus-zenbook-duo/121120

However I still cannot seem to calibrate the touch screen capability of my system and it’s dual screens. My xrandr output is as follows:

Screen 0: minimum 320 x 200, current 1921 x 1595, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+1+0 (normal left inverted right x axis y axis) 309mm x 173mm
   1920x1080     60.01*+  60.01    59.97    59.96    59.93  
   1680x1050     59.95    59.88  
   1400x1050     59.98  
   1600x900      59.99    59.94    59.95    59.82  
   1280x1024     60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1440x810      60.00    59.97  
   1368x768      59.88    59.85  
   1280x800      59.99    59.97    59.81    59.91  
   1280x720      60.00    59.99    59.86    59.74  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   960x540       59.96    59.99    59.63    59.82  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   700x525       59.98  
   800x450       59.95    59.82  
   640x512       60.02  
   700x450       59.96    59.88  
   640x480       60.00    59.94  
   720x405       59.51    58.99  
   684x384       59.88    59.85  
   640x400       59.88    59.98  
   640x360       59.86    59.83    59.84    59.32  
   512x384       60.00  
   512x288       60.00    59.92  
   480x270       59.63    59.82  
   400x300       60.32    56.34  
   432x243       59.92    59.57  
   320x240       60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  
DP-1 connected 1920x515+0+1080 (normal left inverted right x axis y axis) 310mm x 80mm
   1920x515      60.07*+  48.08  
HDMI-1 disconnected (normal left inverted right x axis y axis)

I’ve tried using xinput to map the outputs of my touchscreens but the issue persists. One screen will be calibrated and respond precisely to touch inputs, but the other display will have issues and the cursor will not respond precisely. It’s almost as if the resolution of the smaller display defines the parameters of the other display. I am confused as how to calibrate this manually using xinput or by some other means. Any help is appreciated.

Please edit your post to use proper formatting.