Hello. Im new user and have problem with my mouse bloody w90. It’s stops over apps windows and doesn’t move or moves only horizontally/vertically. I tried diffrent graphic drivers and input drivers but nothing helped. On the producer website all software is only for windows.
I use KDE and my kernel is 6.5.5-1
Depsite changing polling speed i also had to lower cursor speed. The cursor speed option in system settings didn’t work/make diffrence and i had to use lxinput for this.
More information will be needed from you. Please read:
Cheers.
What kind of information do you need?
From https://forum.manjaro.org/t/howto-request-support/91463 top to bottom.
Detail prior actions leading to the issue.
Installed Manjaro. Opened any app with gui.
List solutions and guides you already tried
Arleady wrote it down in first post. Tried diffrent drivers for graphic card and mouse but didn’t helped.
On mouse producent site only files are for windows.
Provide any related error messages.
None. It’s doesn’t make any error messages.
Provide your system information
Mouse w90pro from bloody
System:
Kernel: 6.5.5-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.5-x86_64
root=UUID=aa2da0af-228f-4886-97ce-afb1cd73962a rw quiet splash
udev.log_priority=3
Desktop: KDE Plasma v: 5.27.8 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 2 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRIME B550M-A (WI-FI) v: Rev X.0x
serial: <superuser required> UEFI: American Megatrends v: 2003
date: 03/10/2021
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 32 GiB available: 31.25 GiB used: 3.44 GiB (11.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 5 3600X bits: 64 type: MT MCP arch: Zen 2 gen: 3
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23)
model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 32 MiB
desc: 2x16 MiB
Speed (MHz): avg: 2531 high: 3592 min/max: 2200/4409 boost: disabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3590 2: 2053
3: 3590 4: 2200 5: 2200 6: 2200 7: 2200 8: 2155 9: 3592 10: 2200 11: 2200
12: 2200 bogomips: 91060
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
rdtscp rep_good sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2
sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP
protection
Type: spec_rstack_overflow mitigation: safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060] vendor: Micro-Star MSI
driver: nvidia v: 535.113.01 alternate: nouveau,nvidia_drm non-free: 535.xx+
status: current (as of 2023-09) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-23 pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0b:00.0 chip-ID: 10de:2503 class-ID: 0300
Device-2: Microdia USB 2.0 Camera driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-1:2 chip-ID: 0c45:636d
class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.8 compositor: kwin_x11 driver: X:
loaded: nvidia gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 122 s-size: 533x302mm (20.98x11.89")
s-diag: 613mm (24.12") monitors: <missing: xrandr>
Monitor-1: Unknown-1 size-res: N/A modes: 2560x1440
API: EGL v: 1.5 hw: drv: nvidia platforms: gbm: drv: nvidia
API: OpenGL v: 4.6.0 vendor: nvidia v: 535.113.01 glx-v: 1.4
direct-render: yes renderer: NVIDIA GeForce RTX 3060/PCIe/SSE2
memory: 11.72 GiB
API: Vulkan v: 1.3.264 layers: 1 device: 0 type: discrete-gpu
name: NVIDIA GeForce RTX 3060 driver: nvidia v: 535.113.01
device-ID: 10de:2503 surfaces: xcb,xlib
Audio:
Device-1: NVIDIA GA106 High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0b:00.1 chip-ID: 10de:228e class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0d:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Microdia USB 2.0 Camera driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-1:2 chip-ID: 0c45:636d
class-ID: 0102 serial: <filter>
Device-4: C-Media Thronmax MDrill Dome Plus
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 3-3:3 chip-ID: 0d8c:0062 class-ID: 0300
API: ALSA v: k6.5.5-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.81 status: off with: pipewire-media-session
status: active tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
type: plugin tools: pacat,pactl
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: N/A modules: iwlwifi pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 09:00.0 chip-ID: 8086:2723 class-ID: 0280
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 0a:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp10s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-3: Microsoft Xbox 360 Wireless Adapter driver: xpad type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-4:4 chip-ID: 045e:0719
class-ID: ff00 serial: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-5:6 chip-ID: 8087:0029
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.84 TiB used: 11.33 GiB (0.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: A-Data model: SX8200PNP
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 42B9T6TB temp: 33.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: PNY model: 1TB SATA SSD
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 916a scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 500 GiB size: 491.08 GiB (98.22%) used: 11.3 GiB (2.3%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: aa2da0af-228f-4886-97ce-afb1cd73962a
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
used: 31 MiB (32.3%) fs: vfat dev: /dev/nvme0n1p4 maj-min: 259:4 label: N/A
uuid: CCE2-A46B
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 50 MiB fs: ntfs
label: Zastrze\xc5\xbcone przez system uuid: 2400E29400E26BEC
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 952.57 GiB fs: ntfs label: N/A
uuid: 62ACE755ACE72271
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 657 MiB fs: ntfs label: N/A
uuid: 143821113820F400
ID-4: /dev/nvme0n1p5 maj-min: 259:5 size: 519 MiB fs: ntfs label: N/A
uuid: 0AF23F03F23EF295
ID-5: /dev/sda1 maj-min: 8:1 size: 431.51 GiB fs: ntfs label: N/A
uuid: 22980AB21D572919
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-1:2 info: Corsair K55 RGB PRO Gaming Keyboard
type: keyboard,HID driver: hid-generic,usbhid interfaces: 3 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA
chip-ID: 1b1c:1ba4 class-ID: 0300 serial: <filter>
Device-2: 1-2:3 info: A4Tech USB DEVICE type: keyboard,mouse,HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 09da:3da3 class-ID: 0300
Device-3: 1-5:6 info: Intel AX200 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0029 class-ID: e001
Device-4: 1-6:5 info: ASUSTek AURA LED Controller type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 16mA chip-ID: 0b05:1939 class-ID: 0300
serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-1:2 info: Microdia USB 2.0 Camera type: video,audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 0c45:636d class-ID: 0102 serial: <filter>
Device-2: 3-3:3 info: C-Media Thronmax MDrill Dome Plus type: audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 0d8c:0062 class-ID: 0300
Device-3: 3-4:4 info: Microsoft Xbox 360 Wireless Adapter type: WiFi
driver: xpad interfaces: 8 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 260mA chip-ID: 045e:0719 class-ID: ff00 serial: <filter>
Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 46.2 C mobo: N/A gpu: nvidia temp: 44 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 0%
Info:
Processes: 272 Uptime: 27m wakeups: 0 Init: systemd v: 254 default: graphical
tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6 Packages: pm: pacman
pkgs: 1154 libs: 340 tools: pamac pm: flatpak pkgs: 0 Shell: Zsh v: 5.9
default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.30
What you’ve given so far is a start – but that’s just like saying “Here’s the make and model of my car; It won’t start; What do I do?”
That’s why other information; the outputs of various commands; are more helpful to identify a problem.
It’s your machine: You need to help us help you.
What graphic drivers? What mouse drivers? What commands did you use? Be specific.
→ Because, you haven’t run any commands to find out.
From top to bottom the output of commands from the following tutorial will likely help someone take a better guess; the more usable information you can provide, the better:
Read any page that tutorial links to, as well.
In the meantime, you could try installing the 6.1 LTS kernel to see if that helps in any way. Cheers.
Post output from sudo grep -B3 -A6 "09da.*3da3" /sys/kernel/debug/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=09da ProdID=3da3 Rev= 0.1c
S: Manufacturer=COMPANY
S: Product=USB DEVICE
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
What polling speed is the mouse set at? I think that one can do 2000Hz but the driver seems to be looking for 1000Hz. Is there a button on the bottom of the mouse to change polling speed?
This topic was automatically closed 3 hours after the last reply. New replies are no longer allowed.