Mismatched icon of apps in task manager

while hovering over the task manager the icon and toolltips does not match
i click over vivalidi and opens chromium browser. :rofl: :rofl:
how to resolve this.

System:
  Kernel: 5.10.92-1-MANJARO-ARM-RPI aarch64 bits: 64 compiler: N/A
    parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:06:B0:12
    vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    root=PARTUUID=aca4b0ac-02 rw rootwait console=ttyS0,115200 console=tty3
    selinux=0 quiet splash plymouth.ignore-serial-consoles
    smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200
    usbhid.mousepoll=8 audit=0
  Desktop: KDE Plasma 5.23.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro ARM base: Arch Linux
Machine:
  Type: ARM System: Raspberry Pi 400 Rev 1.0 details: BCM2835 rev: c03130
    serial: <filter>
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.78 GiB used: 1.94 GiB (51.3%) gpu: 76 MiB
  RAM Report:
    missing: Required tool dmidecode not installed. Check --recommends
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 0 stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 600 min/max: 600/2000 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 600 2: 600 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
    class-ID: gpu
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Display: x11 server: X.org 1.21.1.3 compositor: kwin_x11 driver:
    loaded: modesetting alternate: fbdev resolution: <missing: xdpyinfo>
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A
    chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.92-1-MANJARO-ARM-RPI running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: no
  Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fe300000 class-ID: mmcnr
  IF: wlan0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000
    class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 42.97 GiB used: 40.56 GiB (94.4%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Cruzer Blade
    size: 14.32 GiB block-size: physical: 512 B logical: 512 B type: N/A
    serial: <filter> rev: 1.00 scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: USB 3.2Gen1
    size: 28.65 GiB block-size: physical: 512 B logical: 512 B type: N/A
    serial: <filter> rev: 1.00 scheme: MBR
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 14.08 GiB size: 13.8 GiB (98.01%) used: 12.38 GiB (89.7%)
    fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: ROOT_MNJRO
    uuid: 3dbca182-e9f5-4fe6-930e-41d167a4660e
  ID-2: /boot raw-size: 213.6 MiB size: 213.4 MiB (99.89%)
    used: 52.6 MiB (24.6%) fs: vfat dev: /dev/sda1 maj-min: 8:1
    label: BOOT_MNJRO uuid: 3BB2-A835
  ID-3: /run/media/satyamv/5738-0E36 raw-size: 28.65 GiB
    size: 28.63 GiB (99.95%) used: 28.13 GiB (98.2%) fs: vfat dev: /dev/sdb1
    maj-min: 8:17 label: N/A uuid: 5738-0E36
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 5.56 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.1:3 info: SanDisk Cruzer Blade type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA
    chip-ID: 0781:5567 class-ID: 0806 serial: <filter>
  Device-2: 1-1.3:4 info: Pixart Imaging Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
    power: 100mA chip-ID: 093a:2510 class-ID: 0301
  Device-3: 1-1.4:5 info: Holtek Raspberry Pi Internal Keyboard
    type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-2:2 info: SanDisk Ultra Flair type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA
    chip-ID: 0781:5591 class-ID: 0806 serial: <filter>
Sensors:
  System Temperatures: cpu: 38.5 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 199 Uptime: 23m Init: systemd v: 250 tool: systemctl Compilers:
  gcc: N/A Packages: 812 pacman: 796 lib: 206 snap: 16 Shell: Bash v: 5.1.16
  running-in: konsole inxi: 3.3.11

i have changed some appearance settings but don’t know what is causing this.