Greetings everyone,
I need help with my Manjaro Linux, i just installed it and I installed all the gpu drivers I needed, but when I use my gpu for display, I get stuck with no gui. When I switch back to an integrated display, I am able to get gui.
Does anyone know how to fix this issue?
My pc specs:
Intel s2600cwr motherboard
x2 Intel xeon e5-2609 v4 cpus
x4 Transcend 8GB 2666 reg-dimm rams
Nvidia quadro fx3700 gpu
Nvidia tesla c1060 gpu
can you provide
under TTY or terminal
inxi -Fza
sudo mhwd -li
sudo journalctl -b0 | grep nvidiaThanks I will try it out.
i tried it out but i got a bunch error messages, it did not work
Run the three commands suggested one at a time, eg:
inxi -Fza
and post full response from terminal including any error messages
alright i will do it now
i have been trying to post screen shots for my reply but i cant.
how else can i post pictures of what i found when i ran these commands
Welcome to the forum! 
Please edit your topic title to tell us what you need help with.
Please see:
1.This is what i got when i ran the first command
[nathaniel@nathaniel-s2600cwr ~]$ inxi -Fza
System:
Kernel: 5.15.12-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=2a38d22e-a7bd-4d9e-ae09-d2f83a367d1c rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: Xfce 4.16.0 tk: Gtk 3.24.29 info: xfce4-panel wm: xfwm 4.16.1
vt: 7 dm: LightDM 1.30.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Server Mobo: Intel model: S2600CWR v: H12881-271
serial: <superuser required> UEFI-[Legacy]: Intel
v: SE5C610.86B.01.01.0016.033120161139 date: 03/31/2016
CPU:
Info: model: Intel Xeon E5-2609 v4 bits: 64 type: MCP SMP arch: Broadwell
family: 6 model-id: 0x4F (79) stepping: 1 microcode: 0xB00003E
Topology: cpus: 2x cores: 8 smt: <unsupported> cache:
L1: 2x 512 KiB (1024 KiB) desc: d-8x32 KiB; i-8x32 KiB L2: 2x 2 MiB (4 MiB)
desc: 8x256 KiB L3: 2x 20 MiB (40 MiB) desc: 1x20 MiB
Speed (MHz): avg: 1197 high: 1198 min/max: 1200/1700 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1197 2: 1197 3: 1197
4: 1197 5: 1197 6: 1198 7: 1198 8: 1198 9: 1198 10: 1197 11: 1197
12: 1198 13: 1197 14: 1197 15: 1197 16: 1197 bogomips: 54323
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT disabled
Graphics:
Device-1: NVIDIA G92GL [Quadro FX 3700] driver: N/A alternate: nouveau
bus-ID: 03:00.0 chip-ID: 10de:061a class-ID: 0300
Device-2: NVIDIA GT200GL [Tesla C1060 / M1060] driver: N/A
alternate: nouveau bus-ID: 04:00.0 chip-ID: 10de:05e7 class-ID: 0302
Device-3: Matrox Systems MGA G200e [Pilot] ServerEngines vendor: Intel
driver: mgag200 v: kernel bus-ID: 06:00.0 chip-ID: 102b:0522 class-ID: 0300
Display: x11 server: X.Org 1.21.1.2 compositor: xfwm4 v: 4.16.1 driver:
loaded: modesetting alternate: fbdev,mga,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0")
s-diag: 338mm (13.3")
Monitor-1: VGA-1 res: 1024x768 hz: 60
OpenGL: renderer: llvmpipe (LLVM 13.0.0 256 bits) v: 4.5 Mesa 21.3.2
direct render: Yes
Audio:
Message: No device data found.
Sound Server-1: JACK v: 1.9.19 running: no
Sound Server-2: PulseAudio v: 15.0 running: yes
Sound Server-3: PipeWire v: 0.3.42 running: no
Network:
Device-1: Intel I350 Gigabit Network driver: igb v: kernel port: 5020
bus-ID: 01:00.0 chip-ID: 8086:1521 class-ID: 0200
IF: eno0 state: down mac: <filter>
Device-2: Intel I350 Gigabit Network driver: igb v: kernel port: 5000
bus-ID: 01:00.1 chip-ID: 8086:1521 class-ID: 0200
IF: enp1s0f1 state: down mac: <filter>
RAID:
Hardware-1: Broadcom / LSI MegaRAID SAS 2208 [Thunderbolt]
driver: megaraid_sas v: 07.717.02.00-rc1 port: 2000 bus-ID: 07:00.0
chip-ID: 1000:005b rev: N/A class-ID: 0104
Drives:
Local Storage: total: 931.51 GiB used: 103.38 GiB (11.1%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10EZEX-60WN4A0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 1A01 scheme: MBR
Partition:
ID-1: / raw-size: 931.51 GiB size: 915.81 GiB (98.31%)
used: 103.38 GiB (11.3%) fs: ext4 dev: /dev/sda1 maj-min: 8:1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 33.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 328 Uptime: 1m wakeups: 0 Memory: 31.3 GiB used: 1.26 GiB (4.0%)
Init: systemd v: 250 tool: systemctl Compilers: gcc: 11.1.0 clang: 13.0.0
Packages: pacman: 1194 lib: 323 flatpak: 0 Shell: Bash v: 5.1.12
running-in: xfce4-terminal inxi: 3.3.11
2.This is what i got when i ran the second command
[nathaniel@nathaniel-s2600cwr ~]$ sudo mhwd -li
[sudo] password for nathaniel:
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-modesetting 2020.01.13 true PCI
video-linux 2018.05.04 true PCI
Warning: No installed USB configs!
[nathaniel@nathaniel-s2600cwr ~]$ sudo journalctl -b0 | grep nvidia
Jan 22 18:23:49 nathaniel-s2600cwr kernel: audit: type=1400 audit(1642868629.879:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=400 comm="apparmor_parser"
Jan 22 18:23:49 nathaniel-s2600cwr kernel: audit: type=1400 audit(1642868629.882:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=400 comm="apparmor_parser"
Jan 22 18:23:49 nathaniel-s2600cwr audit[400]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=400 comm="apparmor_parser"
Jan 22 18:23:49 nathaniel-s2600cwr audit[400]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=400 comm="apparmor_parser"
Jan 22 18:23:49 nathaniel-s2600cwr systemd-modules-load[380]: Failed to find module 'nvidia-uvm'
Sorry i couldn’t post screenshots so i had to copy and paste.
By doing what?
No NVIDIA driver is installed. Both are legacy cards not supported by any of our current proprietary NVIDIA drivers (video-nvidia).
You can install the free drivers (video-linux / nouveau) either from the terminal or with Manjaro Settings Manager:
sudo mhwd -a pci free 0300
See Configure Graphics Cards - Manjaro
That’s exactly what was expected. Screenshots of text are useless. 
Thanks a lot Yochanan, i will try installing the free drivers.
when i install free drivers, it says the drivers are already installed
What’s the full output of that command?
here’s what i got
[nathaniel@nathaniel-s2600cwr ~]$ sudo mhwd -a pci free 0300
> Skipping already installed config 'video-linux' for device: 0000:03:00.0 (0300:10de:061a) Display controller nVidia Corporation G92GL [Quadro FX 3700]
> Skipping already installed config 'video-modesetting' for device: 0000:06:00.0 (0300:102b:0522) Display controller Matrox Graphics, Inc. G200 SE A (PCI)