Manjaro takes a long time to load after login

[Mirdarthos]

That points to some kind of configuration error…

@mithrial

You might be more successful checking the journal with journalctl to see what’s happening.

Please post the output of:

journalctl --boot=0 --priority=warning..err --no-pager

Where:

• --boot=0 limits the messages to be from the current boot;
• --priority=warning..err limits the messages to be warnings and errors only; and
• --no-pager formats the output nicely for use here, on the forum.

[Creapermann]

Here I have a “Host is down” error

as well as

[Mirdarthos]

Please don’t post screenshots of text. See:

[HowTo] Post command output and file content as formatted text

Difficulty: ★☆☆☆☆ Formatting differences Discourse – this forum’s engine – uses Markdown to format its posts, and removes “unnecessary” whitespace. Terminal commands often produce output formatted so that they are better readable by the user, taking advantage of the monospaced font used. Programming code often rely on indentation to make it more readable. Using preformatting in Markdown Markdown includes a pattern to provide preformatting when necessary. You only need to put the part to f…

[Creapermann]

Nov 02 07:59:09 creapermann-g33500 kernel: x86/cpu: SGX disabled by BIOS.
Nov 02 07:59:09 creapermann-g33500 kernel: MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
Nov 02 07:59:09 creapermann-g33500 kernel:   #7  #8  #9 #10 #11
Nov 02 07:59:09 creapermann-g33500 kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Nov 02 07:59:09 creapermann-g33500 kernel: hpet_acpi_add: no address or irqs in _CRS
Nov 02 07:59:09 creapermann-g33500 kernel: i8042: Warning: Keylock active
Nov 02 07:59:09 creapermann-g33500 kernel: usb: port power management may be unreliable
Nov 02 07:59:09 creapermann-g33500 kernel: vboxdrv: loading out-of-tree module taints kernel.
Nov 02 07:59:09 creapermann-g33500 kernel: VBoxNetAdp: Successfully started.
Nov 02 07:59:09 creapermann-g33500 kernel: VBoxNetFlt: Successfully started.
Nov 02 07:59:09 creapermann-g33500 systemd-udevd[322]: /etc/udev/rules.d/45-usb-stlink-v2.rules:1 Unknown group 'plugdev', ignoring.
Nov 02 07:59:09 creapermann-g33500 kernel: wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
Nov 02 07:59:09 creapermann-g33500 kernel: mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x800000
Nov 02 07:59:09 creapermann-g33500 kernel: r8169 0000:3b:00.0: can't disable ASPM; OS doesn't have ASPM control
Nov 02 07:59:09 creapermann-g33500 kernel: iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
Nov 02 07:59:10 creapermann-g33500 kernel: nvidia: module license 'NVIDIA' taints kernel.
Nov 02 07:59:10 creapermann-g33500 kernel: Disabling lock debugging due to kernel taint
Nov 02 07:59:10 creapermann-g33500 kernel: thermal thermal_zone6: failed to read out thermal zone (-61)
Nov 02 07:59:10 creapermann-g33500 kernel: 
Nov 02 07:59:10 creapermann-g33500 kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  535.113.01  Tue Sep 12 19:41:24 UTC 2023
Nov 02 07:59:10 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
Nov 02 07:59:11 creapermann-g33500 kernel: nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
Nov 02 07:59:11 creapermann-g33500 systemd-sysctl[820]: Couldn't write '1' to 'net/ipv6/conf/your-network-interface-name-here/disable_ipv6', ignoring: No such file or directory
Nov 02 07:59:11 creapermann-g33500 kernel: snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
Nov 02 07:59:11 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
Nov 02 07:59:11 creapermann-g33500 systemd[1]: nordvpnd.socket: TCP_NODELAY failed: Operation not supported
Nov 02 07:59:11 creapermann-g33500 (uetoothd)[849]: bluetooth.service: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 755 ConfigurationDirectoryMode: 555)
Nov 02 07:59:11 creapermann-g33500 bluetoothd[849]: src/plugin.c:plugin_init() System does not support csip plugin
Nov 02 07:59:11 creapermann-g33500 bluetoothd[849]: profiles/audio/micp.c:micp_init() D-Bus experimental not enabled
Nov 02 07:59:11 creapermann-g33500 bluetoothd[849]: src/plugin.c:plugin_init() System does not support micp plugin
Nov 02 07:59:11 creapermann-g33500 bluetoothd[849]: src/plugin.c:plugin_init() System does not support vcp plugin
Nov 02 07:59:11 creapermann-g33500 bluetoothd[849]: src/plugin.c:plugin_init() System does not support mcp plugin
Nov 02 07:59:11 creapermann-g33500 bluetoothd[849]: src/plugin.c:plugin_init() System does not support bass plugin
Nov 02 07:59:11 creapermann-g33500 bluetoothd[849]: src/plugin.c:plugin_init() System does not support bap plugin
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 916, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 919, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 937, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 939, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: Cannot find unit for notify message of PID 975, ignoring.
Nov 02 07:59:11 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 07:59:11 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 07:59:11 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 07:59:11 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 990, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 991, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 992, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 993, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 994, but reception only permitted for main PID 857
Nov 02 07:59:11 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 995, but reception only permitted for main PID 857
Nov 02 07:59:12 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 07:59:12 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 07:59:12 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 07:59:12 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 07:59:14 creapermann-g33500 kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20220331/nsarguments-61)
Nov 02 07:59:17 creapermann-g33500 systemd[1174]: xdg-user-dirs-update.service: Failed with result 'exit-code'.
Nov 02 07:59:17 creapermann-g33500 systemd[1174]: Failed to start Update XDG user dir configuration.
Nov 02 07:59:17 creapermann-g33500 sddm-greeter[1344]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7ffe18b70720), parent's thread is QThread(0x55c9ea576dc0), current thread is QThread(0x55c9ea6dcf40)
Nov 02 07:59:17 creapermann-g33500 sddm-greeter[1344]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7ffe18b70720), parent's thread is QThread(0x55c9ea576dc0), current thread is QThread(0x55c9ea6dcf40)
Nov 02 07:59:17 creapermann-g33500 sddm-greeter[1344]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7ffe18b70720), parent's thread is QThread(0x55c9ea576dc0), current thread is QThread(0x55c9ea6dcf40)
Nov 02 07:59:17 creapermann-g33500 sddm-greeter[1344]: QObject::installEventFilter(): Cannot filter events for objects in a different thread.
Nov 02 07:59:18 creapermann-g33500 upowerd[1386]: Assuming system scope even though scope is Unknown
Nov 02 07:59:18 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/components/VirtualKeyboard.qml:11:1: Type InputPanel unavailable
Nov 02 07:59:18 creapermann-g33500 sddm-greeter[1344]: qrc:/QtQuick/VirtualKeyboard/content/InputPanel.qml:138:5: Type Keyboard unavailable
Nov 02 07:59:18 creapermann-g33500 sddm-greeter[1344]: qrc:/QtQuick/VirtualKeyboard/content/components/Keyboard.qml:38:1: module "QtQuick.VirtualKeyboard.Plugins" is not installed
Nov 02 07:59:18 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.30'
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: QDBusConnection: name 'org.freedesktop.UPower' had owner '' but we thought it was ':1.31'
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:19 creapermann-g33500 sddm-greeter[1344]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:22 creapermann-g33500 sddm[1029]: Authentication information: SDDM::Auth::INFO_UNKNOWN "Web console: https://creapermann-g33500:9090/ or https://192.168.178.51:9090/\n"
Nov 02 07:59:22 creapermann-g33500 NetworkManager[875]: <warn>  [1698908362.9329] device (wlp0s20f3): no secrets: No agents were available for this request.
Nov 02 07:59:22 creapermann-g33500 NetworkManager[875]: <warn>  [1698908362.9332] device (wlp0s20f3): Activation: failed for connection 'FRITZ!Box 7590 ZG'
Nov 02 07:59:24 creapermann-g33500 eruption-proces[1441]: creapermann-g33500 eruption-process-monitor[1441]: Could not connect to a Wayland compositor, giving up: Could not find wayland compositor
Nov 02 07:59:24 creapermann-g33500 systemd[1401]: eruption-process-monitor.service: Failed with result 'exit-code'.
Nov 02 07:59:24 creapermann-g33500 eruption-audio-[1440]: creapermann-g33500 eruption-audio-proxy[1440]: Connection error: Could not query PulseAudio/PipeWire
Nov 02 07:59:24 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Socket error: Audio proxy disconnected
Nov 02 07:59:24 creapermann-g33500 kwin_wayland[1452]: No backend specified, automatically choosing drm
Nov 02 07:59:25 creapermann-g33500 kwin_wayland[1452]: kwin_xkbcommon: XKB: inet:323:58: unrecognized keysym "XF86EmojiPicker"
Nov 02 07:59:25 creapermann-g33500 kwin_wayland[1452]: kwin_xkbcommon: XKB: inet:324:58: unrecognized keysym "XF86Dictate"
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 2:1: cannot get freq at ep 0x1
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 07:59:25 creapermann-g33500 kernel: usb 1-2.4: 2:1: cannot get freq at ep 0x1
Nov 02 07:59:25 creapermann-g33500 wireplumber[1450]: <WpPortalPermissionStorePlugin:0x55ab245a9530> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Nov 02 07:59:25 creapermann-g33500 wireplumber[1450]: <WpPortalPermissionStorePlugin:0x55ab245a9530> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Nov 02 07:59:26 creapermann-g33500 ksplashqml[1455]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:49: ReferenceError: maxWidth is not defined
Nov 02 07:59:26 creapermann-g33500 ksplashqml[1455]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:82:29: Unable to assign int to QEasingCurve
Nov 02 07:59:26 creapermann-g33500 ksmserver[1601]: Qt: Session management error: networkIdsList argument is NULL
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: Checking screens: available: (QScreen(0x55b9b92fa160, name="eDP-1")) redundant: QHash() fake: QSet() all: (QScreen(0x55b9b92fa160, name="eDP-1"))
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: Aborting shell load: The activity manager daemon (kactivitymanagerd) is not running.
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: If this Plasma has been installed into a custom prefix, verify that its D-Bus services dir is known to the system for the daemon to be activatable.
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: Aborting shell load: The activity manager daemon (kactivitymanagerd) is not running.
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: If this Plasma has been installed into a custom prefix, verify that its D-Bus services dir is known to the system for the daemon to be activatable.
Nov 02 07:59:27 creapermann-g33500 polkit-kde-authentication-agent-1[1716]: KXMessages used on non-X11 platform! This is an application bug.
Nov 02 07:59:27 creapermann-g33500 org_kde_powerdevil[1719]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Nov 02 07:59:27 creapermann-g33500 kded5[1603]: kf.coreaddons: "Could not load plugin from /usr/lib/qt/plugins/plasma/geolocationprovider/plasma-geolocation-gps.so: Cannot load library /usr/lib/qt/plugins/plasma/geolocationprovider/plasma-geolocation-gps.so: (libgps.so.30: cannot open shared object file: No such file or directory)"
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/kirigami.2/templates/InlineMessage.qml:265:13: QML SelectableLabel: Binding loop detected for property "implicitWidth"
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:27 creapermann-g33500 kded5[1603]: QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
Nov 02 07:59:27 creapermann-g33500 kded5[1603]: kscreen.kded: PowerDevil SuspendSession action not available!
Nov 02 07:59:27 creapermann-g33500 kded5[1603]: kf.networkmanagerqt: void NetworkManager::ConnectionPrivate::onPropertiesChanged(const QVariantMap&) Unhandled property "VersionId"
Nov 02 07:59:27 creapermann-g33500 kioslave5[1847]: QObject::connect: No such slot DesktopProtocol::_k_slotRedirection(KIO::Job *, QUrl)
Nov 02 07:59:27 creapermann-g33500 org_kde_powerdevil[1719]: org.kde.powerdevil: Handle button events action could not check for screen configuration
Nov 02 07:59:27 creapermann-g33500 org_kde_powerdevil[1719]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Nov 02 07:59:27 creapermann-g33500 DesktopVideoUpdater[1898]: qt.qpa.plugin: Could not find the Qt platform plugin "wayland" in ""
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: Trying to use rootObject before initialization is completed, whilst using setInitializationDelayed. Forcing completion
Nov 02 07:59:27 creapermann-g33500 plasmashell[1662]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:28 creapermann-g33500 plasmashell[1662]: Cyclic dependency detected between "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml" and "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/ThumbnailStrip.qml"
Nov 02 07:59:28 creapermann-g33500 plasmashell[1662]: Cyclic dependency detected between "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml" and "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/NotificationHeader.qml"
Nov 02 07:59:28 creapermann-g33500 plasmashell[1662]: file:///usr/share/plasma/plasmoids/org.kde.plasma.networkmanagement/contents/ui/main.qml:95: TypeError: Cannot read property 'airplaneModeAvailable' of null
Nov 02 07:59:28 creapermann-g33500 plasmashell[1662]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:28 creapermann-g33500 plasmashell[1662]: QFont::setPointSizeF: Point size <= 0 (0.000000), must be greater than 0
Nov 02 07:59:28 creapermann-g33500 plasmashell[1662]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:28 creapermann-g33500 plasmashell[1662]: file:///usr/share/plasma/plasmoids/org.kde.plasma.kickoff/contents/ui/ApplicationsPage.qml:178: TypeError: Cannot call method 'forceActiveFocus' of null
Nov 02 07:59:29 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:29 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:30 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:30 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:30 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:31 creapermann-g33500 kernel: usb 1-2.4: 2:1: cannot get freq at ep 0x1
Nov 02 07:59:31 creapermann-g33500 ksmserver-logout-greeter[2192]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:31 creapermann-g33500 ksmserver-logout-greeter[2192]: qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
Nov 02 07:59:31 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:31 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:31 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:31 creapermann-g33500 plasmashell[1662]: kf5idletime_wayland: This plugin does not support polling idle time
Nov 02 07:59:32 creapermann-g33500 plasmashell[1662]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55b9bc6c4020) QQmlContext(0x55b9ba63ae70) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 07:59:32 creapermann-g33500 plasmashell[1662]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55b9bc6c4020) QQmlContext(0x55b9ba63ae70) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 07:59:32 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:32 creapermann-g33500 bluetoothd[849]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
Nov 02 07:59:32 creapermann-g33500 plasmashell[1662]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 07:59:33 creapermann-g33500 kaccess[1951]: The X11 connection broke (error 1). Did the X11 server die?
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: app-kaccess@autostart.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 kwin_wayland[1452]: QtDBus: cannot relay signals from parent QObject(0x55722b19c610 "") unless they are emitted in the object's thread QThread(0x55722af41078 "libinput-connection"). Current thread is QThread(0x55722af00e50 "").
Nov 02 07:59:33 creapermann-g33500 kwalletd5[1417]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 kwalletd5[1417]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 kded5[1603]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 plasmashell[1662]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 kactivitymanagerd[1711]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 kactivitymanagerd[1711]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 flameshot[1900]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 polkit-kde-authentication-agent-1[1716]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 org_kde_powerdevil[1719]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 pamac-tray-plasma[1961]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 kdeconnectd[1921]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 msm_kde_notifier[1916]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 DiscoverNotifier[1954]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 DiscoverNotifier[1954]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 xdg-desktop-portal-kde[1720]: The Wayland connection broke. Did the Wayland compositor die?
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: plasma-xdg-desktop-portal-kde.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: app-org.kde.kdeconnect.daemon@autostart.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: app-msm_kde_notifier@autostart.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: plasma-kactivitymanagerd.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: app-Flameshot@autostart.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: plasma-kded.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: app-org.moson.matray@autostart.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: app-org.kde.discover.notifier@autostart.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: app-pamac\x2dtray\x2dplasma@autostart.service: Failed with result 'exit-code'.
Nov 02 07:59:33 creapermann-g33500 systemd[1401]: plasma-plasmashell.service: Failed with result 'exit-code'.
Nov 02 07:59:34 creapermann-g33500 polkit-kde-authentication-agent-1[2306]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Main process exited, code=killed, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Failed with result 'signal'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE PolicyKit Authentication Agent.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Main process exited, code=dumped, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Failed with result 'core-dump'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start Powerdevil.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-plasmashell.service: Main process exited, code=dumped, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-plasmashell.service: Failed with result 'core-dump'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE Plasma Workspace.
Nov 02 07:59:34 creapermann-g33500 polkit-kde-authentication-agent-1[2324]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Main process exited, code=killed, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Failed with result 'signal'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE PolicyKit Authentication Agent.
Nov 02 07:59:34 creapermann-g33500 polkit-kde-authentication-agent-1[2348]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Main process exited, code=killed, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Failed with result 'signal'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE PolicyKit Authentication Agent.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Main process exited, code=dumped, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Failed with result 'core-dump'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start Powerdevil.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-plasmashell.service: Main process exited, code=dumped, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-plasmashell.service: Failed with result 'core-dump'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE Plasma Workspace.
Nov 02 07:59:34 creapermann-g33500 polkit-kde-authentication-agent-1[2369]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Main process exited, code=killed, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Failed with result 'signal'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE PolicyKit Authentication Agent.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-plasmashell.service: Start request repeated too quickly.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-plasmashell.service: Failed with result 'core-dump'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE Plasma Workspace.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Start request repeated too quickly.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-polkit-agent.service: Failed with result 'signal'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start KDE PolicyKit Authentication Agent.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Main process exited, code=dumped, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Failed with result 'core-dump'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start Powerdevil.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Main process exited, code=dumped, status=6/ABRT
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Failed with result 'core-dump'.
Nov 02 07:59:34 creapermann-g33500 systemd[1401]: Failed to start Powerdevil.
Nov 02 07:59:35 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Start request repeated too quickly.
Nov 02 07:59:35 creapermann-g33500 systemd[1401]: plasma-powerdevil.service: Failed with result 'core-dump'.
Nov 02 07:59:35 creapermann-g33500 systemd[1401]: Failed to start Powerdevil.
Nov 02 07:59:36 creapermann-g33500 baloo_file_extractor[2439]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:36 creapermann-g33500 baloo_file_extractor[2450]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:36 creapermann-g33500 baloo_file_extractor[2465]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:36 creapermann-g33500 baloo_file_extractor[2479]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:36 creapermann-g33500 baloo_file_extractor[2493]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2511]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2525]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2539]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2557]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 xdg-desktop-portal-kde[2570]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2585]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 systemd[2555]: xdg-user-dirs-update.service: Failed with result 'exit-code'.
Nov 02 07:59:37 creapermann-g33500 systemd[2555]: Failed to start Update XDG user dir configuration.
Nov 02 07:59:37 creapermann-g33500 systemd[1401]: plasma-xdg-desktop-portal-kde.service: Main process exited, code=dumped, status=6/ABRT
Nov 02 07:59:37 creapermann-g33500 systemd[1401]: plasma-xdg-desktop-portal-kde.service: Failed with result 'core-dump'.
Nov 02 07:59:37 creapermann-g33500 systemd[1401]: Failed to start Xdg Desktop Portal For KDE.
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2613]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 sddm-greeter[2602]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7ffc1a3814f0), parent's thread is QThread(0x563c921f7dc0), current thread is QThread(0x563c9235d8f0)
Nov 02 07:59:37 creapermann-g33500 sddm-greeter[2602]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7ffc1a3814f0), parent's thread is QThread(0x563c921f7dc0), current thread is QThread(0x563c9235d8f0)
Nov 02 07:59:37 creapermann-g33500 sddm-greeter[2602]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7ffc1a3814f0), parent's thread is QThread(0x563c921f7dc0), current thread is QThread(0x563c9235d8f0)
Nov 02 07:59:37 creapermann-g33500 sddm-greeter[2602]: QObject::installEventFilter(): Cannot filter events for objects in a different thread.
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2644]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 baloo_file_extractor[2668]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:37 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/components/VirtualKeyboard.qml:11:1: Type InputPanel unavailable
Nov 02 07:59:37 creapermann-g33500 sddm-greeter[2602]: qrc:/QtQuick/VirtualKeyboard/content/InputPanel.qml:138:5: Type Keyboard unavailable
Nov 02 07:59:37 creapermann-g33500 sddm-greeter[2602]: qrc:/QtQuick/VirtualKeyboard/content/components/Keyboard.qml:38:1: module "QtQuick.VirtualKeyboard.Plugins" is not installed
Nov 02 07:59:38 creapermann-g33500 baloo_file_extractor[2684]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:38 creapermann-g33500 baloo_file_extractor[2698]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:38 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:38 creapermann-g33500 baloo_file_extractor[2715]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:38 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:38 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:38 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:38 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:38 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:38 creapermann-g33500 sddm-greeter[2602]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 07:59:38 creapermann-g33500 baloo_file_extractor[2730]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:38 creapermann-g33500 baloo_file_extractor[2744]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:38 creapermann-g33500 baloo_file_extractor[2758]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:38 creapermann-g33500 baloo_file_extractor[2772]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:39 creapermann-g33500 baloo_file_extractor[2786]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:39 creapermann-g33500 baloo_file_extractor[2800]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:39 creapermann-g33500 baloo_file_extractor[2814]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:39 creapermann-g33500 baloo_file_extractor[2831]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:39 creapermann-g33500 baloo_file_extractor[2845]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:39 creapermann-g33500 baloo_file_extractor[2859]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:39 creapermann-g33500 baloo_file_extractor[2874]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:40 creapermann-g33500 baloo_file_extractor[2888]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:40 creapermann-g33500 baloo_file_extractor[2901]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:40 creapermann-g33500 baloo_file_extractor[2913]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:40 creapermann-g33500 baloo_file_extractor[2930]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:40 creapermann-g33500 baloo_file_extractor[2944]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:40 creapermann-g33500 baloo_file_extractor[2958]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:40 creapermann-g33500 baloo_file_extractor[2970]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:41 creapermann-g33500 baloo_file_extractor[2986]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:41 creapermann-g33500 baloo_file_extractor[3000]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:41 creapermann-g33500 baloo_file_extractor[3014]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:41 creapermann-g33500 baloo_file_extractor[3028]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:41 creapermann-g33500 baloo_file_extractor[3046]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:41 creapermann-g33500 baloo_file_extractor[3060]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:41 creapermann-g33500 baloo_file_extractor[3074]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:42 creapermann-g33500 baloo_file_extractor[3088]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:42 creapermann-g33500 baloo_file_extractor[3102]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:42 creapermann-g33500 baloo_file_extractor[3116]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:42 creapermann-g33500 baloo_file_extractor[3130]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:42 creapermann-g33500 baloo_file_extractor[3144]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:42 creapermann-g33500 baloo_file_extractor[3158]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:42 creapermann-g33500 baloo_file_extractor[3171]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 baloo_file_extractor[3186]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 baloo_file_extractor[3200]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 baloo_file_extractor[3214]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 baloo_file_extractor[3228]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 baloo_file_extractor[3242]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 baloo_file_extractor[3255]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 baloo_file_extractor[3270]: qt.qpa.xcb: could not connect to display
Nov 02 07:59:43 creapermann-g33500 xdg-desktop-por[1472]: Failed to get application states: The connection is closed
Nov 02 07:59:44 creapermann-g33500 systemd[1401]: xdg-document-portal.service: Failed with result 'exit-code'.
Nov 02 07:59:44 creapermann-g33500 systemd[1401]: xdg-permission-store.service: Failed with result 'exit-code'.
Nov 02 07:59:44 creapermann-g33500 systemd[1401]: obex.service: Failed with result 'exit-code'.
Nov 02 07:59:44 creapermann-g33500 eruption-audio-[1548]: creapermann-g33500 eruption-audio-proxy[1548]: Connection error: Could not query PulseAudio/PipeWire
Nov 02 07:59:44 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Socket error: Audio proxy disconnected
Nov 02 07:59:44 creapermann-g33500 sddm[1029]: Authentication information: SDDM::Auth::INFO_UNKNOWN "Web console: https://creapermann-g33500:9090/ or https://192.168.178.51:9090/\n"
Nov 02 07:59:55 creapermann-g33500 NetworkManager[875]: <warn>  [1698908395.1200] device (wlp0s20f3): no secrets: No agents were available for this request.
Nov 02 07:59:55 creapermann-g33500 NetworkManager[875]: <warn>  [1698908395.1206] device (wlp0s20f3): Activation: failed for connection 'FRITZ!Box 7590 ZG'
Nov 02 08:01:54 creapermann-g33500 ksplashqml[3376]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:49: ReferenceError: maxWidth is not defined
Nov 02 08:01:54 creapermann-g33500 ksplashqml[3376]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:82:29: Unable to assign int to QEasingCurve
Nov 02 08:01:54 creapermann-g33500 eruption-proces[3406]: creapermann-g33500 eruption-process-monitor[3406]: Could not connect to a Wayland compositor, giving up: Could not find wayland compositor
Nov 02 08:01:54 creapermann-g33500 eruption-audio-[3405]: creapermann-g33500 eruption-audio-proxy[3405]: Connection error: Could not query PulseAudio/PipeWire
Nov 02 08:01:54 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Socket error: Audio proxy disconnected
Nov 02 08:01:54 creapermann-g33500 ksmserver[3476]: Qt: Session management error: networkIdsList argument is NULL
Nov 02 08:01:56 creapermann-g33500 kwin_x11[3479]: kwin_xkbcommon: XKB: inet:323:58: unrecognized keysym "XF86EmojiPicker"
Nov 02 08:01:56 creapermann-g33500 kwin_x11[3479]: kwin_xkbcommon: XKB: inet:324:58: unrecognized keysym "XF86Dictate"
Nov 02 08:01:56 creapermann-g33500 ksmserver[3476]: QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.21'
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:01:56 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:01:56 creapermann-g33500 plasmashell[3566]: Checking screens: available: (QScreen(0x55aeb739fb40, name="eDP-1")) redundant: QHash() fake: QSet() all: (QScreen(0x55aeb739fb40, name="eDP-1"))
Nov 02 08:01:56 creapermann-g33500 plasmashell[3566]: Checking screens: available: (QScreen(0x55aeb739fb40, name="eDP-1")) redundant: QHash() fake: QSet() all: (QScreen(0x55aeb739fb40, name="eDP-1"))
Nov 02 08:01:56 creapermann-g33500 plasmashell[3566]: Aborting shell load: The activity manager daemon (kactivitymanagerd) is not running.
Nov 02 08:01:56 creapermann-g33500 plasmashell[3566]: If this Plasma has been installed into a custom prefix, verify that its D-Bus services dir is known to the system for the daemon to be activatable.
Nov 02 08:01:56 creapermann-g33500 plasmashell[3566]: Aborting shell load: The activity manager daemon (kactivitymanagerd) is not running.
Nov 02 08:01:56 creapermann-g33500 plasmashell[3566]: If this Plasma has been installed into a custom prefix, verify that its D-Bus services dir is known to the system for the daemon to be activatable.
Nov 02 08:01:56 creapermann-g33500 eruption-audio-[3561]: creapermann-g33500 eruption-audio-proxy[3561]: Connection error: Could not query PulseAudio/PipeWire
Nov 02 08:01:56 creapermann-g33500 eruption[855]: creapermann-g33500 eruption[855]: Socket error: Audio proxy disconnected
Nov 02 08:01:56 creapermann-g33500 org_kde_powerdevil[3626]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Nov 02 08:01:56 creapermann-g33500 kded5[3478]: kf.coreaddons: "Could not load plugin from /usr/lib/qt/plugins/plasma/geolocationprovider/plasma-geolocation-gps.so: Cannot load library /usr/lib/qt/plugins/plasma/geolocationprovider/plasma-geolocation-gps.so: (libgps.so.30: cannot open shared object file: No such file or directory)"
Nov 02 08:01:56 creapermann-g33500 wireplumber[3412]: <WpPortalPermissionStorePlugin:0x55fd4809e540> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Nov 02 08:01:56 creapermann-g33500 wireplumber[3412]: <WpPortalPermissionStorePlugin:0x55fd4809e540> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Nov 02 08:01:56 creapermann-g33500 kded5[3478]: QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
Nov 02 08:01:56 creapermann-g33500 kded5[3478]: kf.networkmanagerqt: void NetworkManager::ConnectionPrivate::onPropertiesChanged(const QVariantMap&) Unhandled property "VersionId"
Nov 02 08:01:56 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/kirigami.2/templates/InlineMessage.qml:265:13: QML SelectableLabel: Binding loop detected for property "implicitWidth"
Nov 02 08:01:56 creapermann-g33500 kded5[3478]: kscreen.kded: PowerDevil SuspendSession action not available!
Nov 02 08:01:57 creapermann-g33500 kioslave5[3757]: QObject::connect: No such slot DesktopProtocol::_k_slotRedirection(KIO::Job *, QUrl)
Nov 02 08:01:57 creapermann-g33500 ksplashqml[3376]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:49: ReferenceError: maxWidth is not defined
Nov 02 08:01:57 creapermann-g33500 ksplashqml[3376]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:82:29: Unable to assign int to QEasingCurve
Nov 02 08:01:57 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/kirigami.2/templates/InlineMessage.qml:265:13: QML SelectableLabel: Binding loop detected for property "implicitWidth"
Nov 02 08:01:57 creapermann-g33500 plasmashell[3566]: Checking screens: available: (QScreen(0x7feba40043e0, name="HDMI-1-0"), QScreen(0x55aeb739fb40, name="eDP-1")) redundant: QHash() fake: QSet() all: (QScreen(0x7feba40043e0, name="HDMI-1-0"), QScreen(0x55aeb739fb40, name="eDP-1"))
Nov 02 08:01:57 creapermann-g33500 org_kde_powerdevil[3626]: org.kde.powerdevil: Handle button events action could not check for screen configuration
Nov 02 08:01:57 creapermann-g33500 org_kde_powerdevil[3626]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Nov 02 08:01:57 creapermann-g33500 plasmashell[3566]: Trying to use rootObject before initialization is completed, whilst using setInitializationDelayed. Forcing completion
Nov 02 08:01:57 creapermann-g33500 plasmashell[3566]: Cyclic dependency detected between "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml" and "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/ThumbnailStrip.qml"
Nov 02 08:01:57 creapermann-g33500 plasmashell[3566]: Cyclic dependency detected between "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml" and "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/NotificationHeader.qml"
Nov 02 08:01:58 creapermann-g33500 plasmashell[3566]: file:///usr/share/plasma/plasmoids/org.kde.plasma.networkmanagement/contents/ui/main.qml:95: TypeError: Cannot read property 'airplaneModeAvailable' of null
Nov 02 08:01:58 creapermann-g33500 plasmashell[3566]: QFont::setPointSizeF: Point size <= 0 (0.000000), must be greater than 0
Nov 02 08:01:59 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:01:59 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:01:59 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:01:59 creapermann-g33500 pipewire[3411]: spa.audioadapter: 0x55aa994b8d38: scheduling stopped node
Nov 02 08:01:59 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:00 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:00 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:00 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:01 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:01 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:01 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:02 creapermann-g33500 plasmashell[3566]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55aeba686120) QQmlContext(0x55aeb8763900) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 08:02:02 creapermann-g33500 plasmashell[3566]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55aeba686120) QQmlContext(0x55aeb8763900) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 08:02:02 creapermann-g33500 plasmashell[3566]: file:///usr/share/plasma/plasmoids/org.kde.plasma.kickoff/contents/ui/ApplicationsPage.qml:178: TypeError: Cannot call method 'forceActiveFocus' of null
Nov 02 08:02:03 creapermann-g33500 bluetoothd[849]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
Nov 02 08:02:04 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:04 creapermann-g33500 plasmashell[3566]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Nov 02 08:02:21 creapermann-g33500 plasmashell[3566]: file:///usr/share/plasma/plasmoids/org.kde.plasma.taskmanager/contents/ui/Task.qml:286: Unable to assign [undefined] to QString
Nov 02 08:04:29 creapermann-g33500 kstart5[4899]: Omitting both --window and --windowclass arguments is not recommended
Nov 02 08:06:46 creapermann-g33500 kwin_x11[3479]: qml: PlasmaExtras.ScrollArea is deprecated. Use PlasmaComponents3.ScrollView instead.
Nov 02 08:09:18 creapermann-g33500 kstart5[5417]: Omitting both --window and --windowclass arguments is not recommended
Nov 02 08:09:19 creapermann-g33500 kstart5[5451]: Omitting both --window and --windowclass arguments is not recommended

[Mirdarthos]

I see a lot of baloo errors. I don’t know if they’d cause this, but it’s worth testing.

Disable baloo:

balooctl disable

…and reboot to test. Provide the output from above again if it doesn’t help

[Creapermann]

It didn’t help.

Nov 02 08:27:02 creapermann-g33500 kernel: x86/cpu: SGX disabled by BIOS.
Nov 02 08:27:02 creapermann-g33500 kernel: MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
Nov 02 08:27:02 creapermann-g33500 kernel:   #7  #8  #9 #10 #11
Nov 02 08:27:02 creapermann-g33500 kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Nov 02 08:27:02 creapermann-g33500 kernel: hpet_acpi_add: no address or irqs in _CRS
Nov 02 08:27:02 creapermann-g33500 kernel: i8042: Warning: Keylock active
Nov 02 08:27:02 creapermann-g33500 kernel: usb: port power management may be unreliable
Nov 02 08:27:02 creapermann-g33500 kernel: vboxdrv: loading out-of-tree module taints kernel.
Nov 02 08:27:02 creapermann-g33500 kernel: VBoxNetAdp: Successfully started.
Nov 02 08:27:02 creapermann-g33500 kernel: VBoxNetFlt: Successfully started.
Nov 02 08:27:02 creapermann-g33500 systemd-udevd[320]: /etc/udev/rules.d/45-usb-stlink-v2.rules:1 Unknown group 'plugdev', ignoring.
Nov 02 08:27:02 creapermann-g33500 kernel: wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
Nov 02 08:27:02 creapermann-g33500 kernel: mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x800000
Nov 02 08:27:02 creapermann-g33500 kernel: iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
Nov 02 08:27:02 creapermann-g33500 kernel: r8169 0000:3b:00.0: can't disable ASPM; OS doesn't have ASPM control
Nov 02 08:27:03 creapermann-g33500 kernel: thermal thermal_zone6: failed to read out thermal zone (-61)
Nov 02 08:27:03 creapermann-g33500 kernel: nvidia: module license 'NVIDIA' taints kernel.
Nov 02 08:27:03 creapermann-g33500 kernel: Disabling lock debugging due to kernel taint
Nov 02 08:27:03 creapermann-g33500 kernel: 
Nov 02 08:27:03 creapermann-g33500 kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  535.113.01  Tue Sep 12 19:41:24 UTC 2023
Nov 02 08:27:03 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
Nov 02 08:27:04 creapermann-g33500 kernel: nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
Nov 02 08:27:04 creapermann-g33500 kernel: snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
Nov 02 08:27:04 creapermann-g33500 kernel: skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
Nov 02 08:27:04 creapermann-g33500 systemd-sysctl[810]: Couldn't write '1' to 'net/ipv6/conf/your-network-interface-name-here/disable_ipv6', ignoring: No such file or directory
Nov 02 08:27:04 creapermann-g33500 systemd[1]: nordvpnd.socket: TCP_NODELAY failed: Operation not supported
Nov 02 08:27:04 creapermann-g33500 (uetoothd)[839]: bluetooth.service: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 755 ConfigurationDirectoryMode: 555)
Nov 02 08:27:04 creapermann-g33500 bluetoothd[839]: src/plugin.c:plugin_init() System does not support csip plugin
Nov 02 08:27:04 creapermann-g33500 bluetoothd[839]: profiles/audio/micp.c:micp_init() D-Bus experimental not enabled
Nov 02 08:27:04 creapermann-g33500 bluetoothd[839]: src/plugin.c:plugin_init() System does not support micp plugin
Nov 02 08:27:04 creapermann-g33500 bluetoothd[839]: src/plugin.c:plugin_init() System does not support vcp plugin
Nov 02 08:27:04 creapermann-g33500 bluetoothd[839]: src/plugin.c:plugin_init() System does not support mcp plugin
Nov 02 08:27:04 creapermann-g33500 bluetoothd[839]: src/plugin.c:plugin_init() System does not support bass plugin
Nov 02 08:27:04 creapermann-g33500 bluetoothd[839]: src/plugin.c:plugin_init() System does not support bap plugin
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 882, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 896, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 931, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 933, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: Cannot find unit for notify message of PID 957, ignoring.
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 965, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 966, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 967, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 968, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 969, but reception only permitted for main PID 845
Nov 02 08:27:04 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 08:27:04 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 08:27:04 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 08:27:04 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 08:27:04 creapermann-g33500 systemd[1]: snapd.service: Got notification message from PID 973, but reception only permitted for main PID 845
Nov 02 08:27:06 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 08:27:06 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 08:27:06 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: Not binding the device driver because it would require a lesser code maturity level
Nov 02 08:27:06 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: To enable this device driver, please change the 'driver_maturity_level' setting in eruption.conf respectively
Nov 02 08:27:08 creapermann-g33500 kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20220331/nsarguments-61)
Nov 02 08:27:10 creapermann-g33500 systemd[1112]: xdg-user-dirs-update.service: Failed with result 'exit-code'.
Nov 02 08:27:10 creapermann-g33500 systemd[1112]: Failed to start Update XDG user dir configuration.
Nov 02 08:27:10 creapermann-g33500 sddm-greeter[1147]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7fff4a2d8bf0), parent's thread is QThread(0x55b8b94ccdc0), current thread is QThread(0x55b8b9633410)
Nov 02 08:27:10 creapermann-g33500 sddm-greeter[1147]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7fff4a2d8bf0), parent's thread is QThread(0x55b8b94ccdc0), current thread is QThread(0x55b8b9633410)
Nov 02 08:27:10 creapermann-g33500 sddm-greeter[1147]: QObject: Cannot create children for a parent that is in a different thread.
                                                       (Parent is QGuiApplication(0x7fff4a2d8bf0), parent's thread is QThread(0x55b8b94ccdc0), current thread is QThread(0x55b8b9633410)
Nov 02 08:27:10 creapermann-g33500 sddm-greeter[1147]: QObject::installEventFilter(): Cannot filter events for objects in a different thread.
Nov 02 08:27:11 creapermann-g33500 upowerd[1348]: Assuming system scope even though scope is Unknown
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/components/VirtualKeyboard.qml:11:1: Type InputPanel unavailable
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: qrc:/QtQuick/VirtualKeyboard/content/InputPanel.qml:138:5: Type Keyboard unavailable
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: qrc:/QtQuick/VirtualKeyboard/content/components/Keyboard.qml:38:1: module "QtQuick.VirtualKeyboard.Plugins" is not installed
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.32'
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: QDBusConnection: name 'org.freedesktop.UPower' had owner '' but we thought it was ':1.33'
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 08:27:11 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 08:27:12 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 08:27:12 creapermann-g33500 sddm-greeter[1147]: file:///usr/share/sddm/themes/breath/Main.qml:465:13: Unable to assign [undefined] to QUrl
Nov 02 08:27:17 creapermann-g33500 sddm[1022]: Authentication information: SDDM::Auth::INFO_UNKNOWN "Web console: https://creapermann-g33500:9090/ or https://192.168.178.51:9090/\n"
Nov 02 08:27:17 creapermann-g33500 NetworkManager[857]: <warn>  [1698910037.8463] device (wlp0s20f3): no secrets: No agents were available for this request.
Nov 02 08:27:17 creapermann-g33500 NetworkManager[857]: <warn>  [1698910037.8466] device (wlp0s20f3): Activation: failed for connection 'FRITZ!Box 7590 ZG'
Nov 02 08:29:28 creapermann-g33500 ksplashqml[1430]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:49: ReferenceError: maxWidth is not defined
Nov 02 08:29:28 creapermann-g33500 ksplashqml[1430]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:82:29: Unable to assign int to QEasingCurve
Nov 02 08:29:28 creapermann-g33500 eruption-proces[1460]: creapermann-g33500 eruption-process-monitor[1460]: Could not connect to a Wayland compositor, giving up: Could not find wayland compositor
Nov 02 08:29:28 creapermann-g33500 eruption-audio-[1459]: creapermann-g33500 eruption-audio-proxy[1459]: Connection error: Could not query PulseAudio/PipeWire
Nov 02 08:29:28 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: Socket error: Audio proxy disconnected
Nov 02 08:29:29 creapermann-g33500 ksmserver[1531]: Qt: Session management error: networkIdsList argument is NULL
Nov 02 08:29:29 creapermann-g33500 ksmserver[1531]: QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.20'
Nov 02 08:29:30 creapermann-g33500 kwin_x11[1534]: kwin_xkbcommon: XKB: inet:323:58: unrecognized keysym "XF86EmojiPicker"
Nov 02 08:29:30 creapermann-g33500 kwin_x11[1534]: kwin_xkbcommon: XKB: inet:324:58: unrecognized keysym "XF86Dictate"
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 2:1: cannot get freq at ep 0x1
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 2:1: cannot get freq at ep 0x1
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 2:1: cannot get freq at ep 0x1
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 plasmashell[1624]: Checking screens: available: (QScreen(0x55c3b6e0ced0, name="eDP-1")) redundant: QHash() fake: QSet() all: (QScreen(0x55c3b6e0ced0, name="eDP-1"))
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 plasmashell[1624]: Checking screens: available: (QScreen(0x55c3b6e0ced0, name="eDP-1")) redundant: QHash() fake: QSet() all: (QScreen(0x55c3b6e0ced0, name="eDP-1"))
Nov 02 08:29:30 creapermann-g33500 plasmashell[1624]: Aborting shell load: The activity manager daemon (kactivitymanagerd) is not running.
Nov 02 08:29:30 creapermann-g33500 plasmashell[1624]: If this Plasma has been installed into a custom prefix, verify that its D-Bus services dir is known to the system for the daemon to be activatable.
Nov 02 08:29:30 creapermann-g33500 plasmashell[1624]: Aborting shell load: The activity manager daemon (kactivitymanagerd) is not running.
Nov 02 08:29:30 creapermann-g33500 plasmashell[1624]: If this Plasma has been installed into a custom prefix, verify that its D-Bus services dir is known to the system for the daemon to be activatable.
Nov 02 08:29:31 creapermann-g33500 eruption-audio-[1621]: creapermann-g33500 eruption-audio-proxy[1621]: Connection error: Could not query PulseAudio/PipeWire
Nov 02 08:29:31 creapermann-g33500 eruption[843]: creapermann-g33500 eruption[843]: Socket error: Audio proxy disconnected
Nov 02 08:29:31 creapermann-g33500 org_kde_powerdevil[1684]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Nov 02 08:29:31 creapermann-g33500 wireplumber[1469]: <WpPortalPermissionStorePlugin:0x5590039bd830> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Nov 02 08:29:31 creapermann-g33500 wireplumber[1469]: <WpPortalPermissionStorePlugin:0x5590039bd830> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Nov 02 08:29:31 creapermann-g33500 kded5[1533]: kf.coreaddons: "Could not load plugin from /usr/lib/qt/plugins/plasma/geolocationprovider/plasma-geolocation-gps.so: Cannot load library /usr/lib/qt/plugins/plasma/geolocationprovider/plasma-geolocation-gps.so: (libgps.so.30: cannot open shared object file: No such file or directory)"
Nov 02 08:29:31 creapermann-g33500 kded5[1533]: QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
Nov 02 08:29:31 creapermann-g33500 kded5[1533]: kf.networkmanagerqt: void NetworkManager::ConnectionPrivate::onPropertiesChanged(const QVariantMap&) Unhandled property "VersionId"
Nov 02 08:29:31 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/kirigami.2/templates/InlineMessage.qml:265:13: QML SelectableLabel: Binding loop detected for property "implicitWidth"
Nov 02 08:29:31 creapermann-g33500 kded5[1533]: kscreen.kded: PowerDevil SuspendSession action not available!
Nov 02 08:29:31 creapermann-g33500 org_kde_powerdevil[1684]: org.kde.powerdevil: Handle button events action could not check for screen configuration
Nov 02 08:29:31 creapermann-g33500 ksplashqml[1430]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:49: ReferenceError: maxWidth is not defined
Nov 02 08:29:31 creapermann-g33500 ksplashqml[1430]: file:///usr/share/plasma/look-and-feel/org.manjaro.breath-dark.desktop/contents/splash/Splash.qml:82:29: Unable to assign int to QEasingCurve
Nov 02 08:29:31 creapermann-g33500 org_kde_powerdevil[1684]: org.kde.powerdevil: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Nov 02 08:29:31 creapermann-g33500 kioslave5[1832]: QObject::connect: No such slot DesktopProtocol::_k_slotRedirection(KIO::Job *, QUrl)
Nov 02 08:29:31 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/kirigami.2/templates/InlineMessage.qml:265:13: QML SelectableLabel: Binding loop detected for property "implicitWidth"
Nov 02 08:29:31 creapermann-g33500 plasmashell[1624]: Checking screens: available: (QScreen(0x7fd3ec0017c0, name="HDMI-1-0"), QScreen(0x55c3b6e0ced0, name="eDP-1")) redundant: QHash() fake: QSet() all: (QScreen(0x7fd3ec0017c0, name="HDMI-1-0"), QScreen(0x55c3b6e0ced0, name="eDP-1"))
Nov 02 08:29:32 creapermann-g33500 plasmashell[1624]: Trying to use rootObject before initialization is completed, whilst using setInitializationDelayed. Forcing completion
Nov 02 08:29:32 creapermann-g33500 plasmashell[1624]: Cyclic dependency detected between "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml" and "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/NotificationHeader.qml"
Nov 02 08:29:32 creapermann-g33500 plasmashell[1624]: Cyclic dependency detected between "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml" and "file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/ThumbnailStrip.qml"
Nov 02 08:29:32 creapermann-g33500 plasmashell[1624]: file:///usr/share/plasma/plasmoids/org.kde.plasma.networkmanagement/contents/ui/main.qml:95: TypeError: Cannot read property 'airplaneModeAvailable' of null
Nov 02 08:29:32 creapermann-g33500 plasmashell[1624]: QFont::setPointSizeF: Point size <= 0 (0.000000), must be greater than 0
Nov 02 08:29:33 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:34 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:34 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:34 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:35 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:35 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:35 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:36 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:36 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:36 creapermann-g33500 plasmashell[1624]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55c3ba03a630) QQmlContext(0x55c3b81dd990) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 08:29:36 creapermann-g33500 plasmashell[1624]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55c3ba03a630) QQmlContext(0x55c3b81dd990) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 08:29:37 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:38 creapermann-g33500 bluetoothd[839]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
Nov 02 08:29:41 creapermann-g33500 plasmashell[1624]: file:///usr/share/plasma/plasmoids/org.kde.plasma.kickoff/contents/ui/ApplicationsPage.qml:178: TypeError: Cannot call method 'forceActiveFocus' of null
Nov 02 08:29:42 creapermann-g33500 plasmashell[1624]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:29:42 creapermann-g33500 plasmashell[1624]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Nov 02 08:29:57 creapermann-g33500 plasmashell[1624]: file:///usr/share/plasma/plasmoids/org.kde.plasma.taskmanager/contents/ui/Task.qml:286: Unable to assign [undefined] to QString

[Mirdarthos]

OK, since that wasn’t it, it’s time to move on to the next possibility. I also see quite a lot of these errors/warnings:

@Creapermann

Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: 1:1: usb_set_interface failed (-28)
Nov 02 08:29:30 creapermann-g33500 kernel: usb 1-2.4: Not enough bandwidth for new device state.

…and I see it’s because of the USB controller/peripheral. So the next step would be to disconnect all USB devices, and see if that helps.

If it does, connect them 1-by-1 and test them individually. That should help narrowing it down.

If it doesn’t help, do the same as with the previous test.

Edit:

@Creapermann

Nov 02 08:02:21 creapermann-g33500 plasmashell[3566]: file:///usr/share/plasma/plasmoids/org.kde.plasma.taskmanager/contents/ui/Task.qml:286: Unable to assign [undefined] to QString
Nov 02 08:04:29 creapermann-g33500 kstart5[4899]: Omitting both --window and --windowclass arguments is not recommended
Nov 02 08:06:46 creapermann-g33500 kwin_x11[3479]: qml: PlasmaExtras.ScrollArea is deprecated. Use PlasmaComponents3.ScrollView instead.
Nov 02 08:09:18 creapermann-g33500 kstart5[5417]: Omitting both --window and --windowclass arguments is not recommended

I think I might have found something. There is, what seems to me, to be what appears to be a few minutes’ gap there…so let’s see if there’s anything else going on in there…please post the output of:

journalctl --since=08:02 --until=08:10 --no-pager

[Creapermann]

I can confirm that disconnecting the USB devices does not help.

Here is the output:

Nov 02 08:02:00 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:00 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:00 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:01 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:01 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:01 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:02 creapermann-g33500 plasmashell[3566]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55aeba686120) QQmlContext(0x55aeb8763900) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 08:02:02 creapermann-g33500 plasmashell[3566]: Could not find the Plasmoid for Plasma::FrameSvgItem(0x55aeba686120) QQmlContext(0x55aeb8763900) QUrl("file:///usr/share/plasma/plasmoids/org.kde.plasma.notifications/contents/ui/global/Globals.qml")
Nov 02 08:02:02 creapermann-g33500 pamac-tray-plas[3878]: updates_checker.vala:101: 34 updates found
Nov 02 08:02:02 creapermann-g33500 plasmashell[3566]: file:///usr/share/plasma/plasmoids/org.kde.plasma.kickoff/contents/ui/ApplicationsPage.qml:178: TypeError: Cannot call method 'forceActiveFocus' of null
Nov 02 08:02:03 creapermann-g33500 matray[3842]: matray started.
Nov 02 08:02:03 creapermann-g33500 kded5[3478]: Registering ":1.43/org/ayatana/NotificationItem/matray" to system tray
Nov 02 08:02:03 creapermann-g33500 bluetoothd[849]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
Nov 02 08:02:04 creapermann-g33500 plasmashell[3566]: file:///usr/lib/qt/qml/org/kde/plasma/extras/PlaceholderMessage.qml:238:5: QML Heading: Binding loop detected for property "verticalAlignment"
Nov 02 08:02:04 creapermann-g33500 plasmashell[3566]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Nov 02 08:02:04 creapermann-g33500 dbus-daemon[3343]: [session uid=1000 pid=3343] Activating via systemd: service name='org.kde.runners.baloo' unit='plasma-baloorunner.service' requested by ':1.24' (uid=1000 pid=3566 comm="/usr/bin/plasmashell --no-respawn")
Nov 02 08:02:04 creapermann-g33500 systemd[3316]: Starting KRunner provider for baloo file indexer...
Nov 02 08:02:04 creapermann-g33500 dbus-daemon[3343]: [session uid=1000 pid=3343] Successfully activated service 'org.kde.runners.baloo'
Nov 02 08:02:04 creapermann-g33500 systemd[3316]: Started KRunner provider for baloo file indexer.
Nov 02 08:02:05 creapermann-g33500 systemd[3316]: Started Firefox Web Browser - Web Browser.
Nov 02 08:02:05 creapermann-g33500 plasmashell[4127]: ATTENTION: default value of option mesa_glthread overridden by environment.
Nov 02 08:02:05 creapermann-g33500 plasmashell[4127]: ATTENTION: default value of option mesa_glthread overridden by environment.
Nov 02 08:02:05 creapermann-g33500 dbus-daemon[851]: [system] Activating via systemd: service name='org.freedesktop.timedate1' unit='dbus-org.freedesktop.timedate1.service' requested by ':1.132' (uid=1000 pid=4127 comm="/usr/lib/firefox/firefox")
Nov 02 08:02:05 creapermann-g33500 systemd[1]: Starting Time & Date Service...
Nov 02 08:02:05 creapermann-g33500 dbus-daemon[851]: [system] Successfully activated service 'org.freedesktop.timedate1'
Nov 02 08:02:05 creapermann-g33500 systemd[1]: Started Time & Date Service.
Nov 02 08:02:05 creapermann-g33500 rtkit-daemon[1461]: Supervising 6 threads of 3 processes of 1 users.
Nov 02 08:02:05 creapermann-g33500 rtkit-daemon[1461]: Supervising 6 threads of 3 processes of 1 users.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Supervising 6 threads of 3 processes of 1 users.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Supervising 6 threads of 3 processes of 1 users.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Supervising 6 threads of 3 processes of 1 users.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Supervising 6 threads of 3 processes of 1 users.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Successfully made thread 4298 of process 4127 owned by '1000' RT at priority 10.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:06 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:07 creapermann-g33500 systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
Nov 02 08:02:08 creapermann-g33500 wpa_supplicant[1004]: wlp0s20f3: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-34 noise=9999 txrate=26000
Nov 02 08:02:09 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:09 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:09 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:09 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:02:21 creapermann-g33500 systemd[3316]: Started Konsole - Terminal.
Nov 02 08:02:21 creapermann-g33500 plasmashell[3566]: file:///usr/share/plasma/plasmoids/org.kde.plasma.taskmanager/contents/ui/Task.qml:286: Unable to assign [undefined] to QString
Nov 02 08:02:28 creapermann-g33500 systemd[1]: systemd-localed.service: Deactivated successfully.
Nov 02 08:02:35 creapermann-g33500 systemd[1]: systemd-timedated.service: Deactivated successfully.
Nov 02 08:03:27 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:03:27 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:03:54 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:03:54 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:03:54 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:03:54 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:03:54 creapermann-g33500 rtkit-daemon[1461]: Successfully made thread 4859 of process 4443 owned by '1000' RT at priority 10.
Nov 02 08:03:54 creapermann-g33500 rtkit-daemon[1461]: Supervising 8 threads of 5 processes of 1 users.
Nov 02 08:04:02 creapermann-g33500 rtkit-daemon[1461]: Supervising 8 threads of 5 processes of 1 users.
Nov 02 08:04:02 creapermann-g33500 rtkit-daemon[1461]: Supervising 8 threads of 5 processes of 1 users.
Nov 02 08:04:12 creapermann-g33500 dbus-daemon[851]: [system] Activating via systemd: service name='org.freedesktop.timedate1' unit='dbus-org.freedesktop.timedate1.service' requested by ':1.9' (uid=0 pid=857 comm="/usr/lib/snapd/snapd")
Nov 02 08:04:12 creapermann-g33500 systemd[1]: Starting Time & Date Service...
Nov 02 08:04:12 creapermann-g33500 dbus-daemon[851]: [system] Successfully activated service 'org.freedesktop.timedate1'
Nov 02 08:04:12 creapermann-g33500 systemd[1]: Started Time & Date Service.
Nov 02 08:04:29 creapermann-g33500 kstart5[4899]: Omitting both --window and --windowclass arguments is not recommended
Nov 02 08:04:29 creapermann-g33500 systemd[3316]: Started flameshot.
Nov 02 08:04:39 creapermann-g33500 flameshot[3819]: flameshot: info: Capture saved to clipboard.
Nov 02 08:04:42 creapermann-g33500 systemd[1]: systemd-timedated.service: Deactivated successfully.
Nov 02 08:05:19 creapermann-g33500 rtkit-daemon[1461]: Supervising 8 threads of 5 processes of 1 users.
Nov 02 08:05:19 creapermann-g33500 rtkit-daemon[1461]: Supervising 8 threads of 5 processes of 1 users.
Nov 02 08:05:21 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:05:21 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:05:29 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:05:29 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:05:46 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:05:46 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:05:50 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:05:50 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:06:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:06:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:06:15 creapermann-g33500 dbus-daemon[851]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.158' (uid=0 pid=5231 comm="sudo nvim /etc/bluetooth/main.conf")
Nov 02 08:06:15 creapermann-g33500 dbus-daemon[851]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Nov 02 08:06:21 creapermann-g33500 sudo[5231]: creapermann : TTY=pts/1 ; PWD=/home/creapermann ; USER=root ; COMMAND=/usr/bin/nvim /etc/bluetooth/main.conf
Nov 02 08:06:21 creapermann-g33500 sudo[5231]: pam_unix(sudo:session): session opened for user root(uid=0) by creapermann(uid=1000)
Nov 02 08:06:46 creapermann-g33500 kwin_x11[3479]: qml: PlasmaExtras.ScrollArea is deprecated. Use PlasmaComponents3.ScrollView instead.
Nov 02 08:06:54 creapermann-g33500 sudo[5231]: pam_unix(sudo:session): session closed for user root
Nov 02 08:06:57 creapermann-g33500 PackageKit[2099]: uid 1000 is trying to obtain org.freedesktop.packagekit.system-sources-refresh auth (only_trusted:0)
Nov 02 08:06:57 creapermann-g33500 PackageKit[2099]: uid 1000 obtained auth for org.freedesktop.packagekit.system-sources-refresh
Nov 02 08:06:57 creapermann-g33500 PackageKit[2099]: refresh-cache transaction /4_dabeadbe from uid 1000 finished with success after 0ms
Nov 02 08:06:58 creapermann-g33500 PackageKit[2099]: get-updates transaction /5_becbacec from uid 1000 finished with success after 1ms
Nov 02 08:06:58 creapermann-g33500 dbus-daemon[851]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.159' (uid=0 pid=5269 comm="sudo source /etc/bluetooth/main.conf")
Nov 02 08:06:58 creapermann-g33500 dbus-daemon[851]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Nov 02 08:07:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:07:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:07:16 creapermann-g33500 dbus-daemon[851]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.161' (uid=0 pid=5328 comm="sudo nvim /etc/bluetooth/main.conf")
Nov 02 08:07:16 creapermann-g33500 dbus-daemon[851]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
Nov 02 08:07:16 creapermann-g33500 sudo[5328]: creapermann : TTY=pts/1 ; PWD=/home/creapermann ; USER=root ; COMMAND=/usr/bin/nvim /etc/bluetooth/main.conf
Nov 02 08:07:16 creapermann-g33500 sudo[5328]: pam_unix(sudo:session): session opened for user root(uid=0) by creapermann(uid=1000)
Nov 02 08:07:31 creapermann-g33500 sudo[5328]: pam_unix(sudo:session): session closed for user root
Nov 02 08:08:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:08:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:09:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:09:07 creapermann-g33500 rtkit-daemon[1461]: Supervising 7 threads of 4 processes of 1 users.
Nov 02 08:09:18 creapermann-g33500 kstart5[5417]: Omitting both --window and --windowclass arguments is not recommended
Nov 02 08:09:18 creapermann-g33500 systemd[3316]: Started flameshot.
Nov 02 08:09:19 creapermann-g33500 kstart5[5451]: Omitting both --window and --windowclass arguments is not recommended
Nov 02 08:09:19 creapermann-g33500 systemd[3316]: Started flameshot.
Nov 02 08:09:26 creapermann-g33500 flameshot[3819]: flameshot: info: Capture saved to clipboard.
Nov 02 08:09:26 creapermann-g33500 systemd[3316]: app-flameshot-85cd295a5b564e12ab66760b0bbfe609.scope: Consumed 1.039s CPU time.
Nov 02 08:09:26 creapermann-g33500 wpa_supplicant[1004]: wlp0s20f3: WPA: Group rekeying completed with 5c:49:79:0f:8c:4c [GTK=CCMP]

[Mirdarthos]

I’m officially out of ideas…except, perhaps…

Please provide the output of:

ls -l ~/.config/plasma-workspace/env

and

ls -l /etc/xdg/autostart/

and

ls -l ~/.config/autostart/

[soundofthunder]

Please post the output of:

journalctl -qg 'stack smashing detected'

Thanks.

[Creapermann]

total 0,

total 156
-rw-r--r-- 1 root root   292 16. Sep 01:07 at-spi-dbus-bus.desktop
-rw-r--r-- 1 root root  2186 30. Sep 14:38 baloo_file.desktop
-rw-r--r-- 1 root root   339 26. Jul 2022  blueberry-obex-agent.desktop
-rw-r--r-- 1 root root   311 26. Jul 2022  blueberry-tray.desktop
-rw-r--r-- 1 root root   287 30. Jan 2023  DesktopVideoUpdaterAutoStart.desktop
-rw-r--r-- 1 root root   223 15. Sep 10:41 geoclue-demo-agent.desktop
-rw-r--r-- 1 root root  1642  1. Okt 01:09 gmenudbusmenuproxy.desktop
-rw-r--r-- 1 root root  8539  7. Jun 12:41 gnome-keyring-pkcs11.desktop
-rw-r--r-- 1 root root  8066  7. Jun 12:41 gnome-keyring-secrets.desktop
-rw-r--r-- 1 root root  6605  7. Jun 12:41 gnome-keyring-ssh.desktop
-rw-r--r-- 1 root root  2961  1. Okt 01:02 kaccess.desktop
-rw-r--r-- 1 root root 12170  1. Okt 01:09 klipper.desktop
-rw-r--r-- 1 root root   121  7. Jul 13:43 msm_kde_notifier.desktop
-rw-r--r-- 1 root root  1297  1. Okt 13:30 org.kde.discover.notifier.desktop
-rw-r--r-- 1 root root  1409 12. Sep 16:37 org.kde.kdeconnect.daemon.desktop
-rw-r--r-- 1 root root  3280  1. Okt 01:09 org.kde.plasmashell.desktop
-rw-r--r-- 1 root root   190 11. Okt 2022  org.moson.matray.desktop
-rw-r--r-- 1 root root   169 19. Sep 18:04 pamac-tray-budgie.desktop
-rw-r--r-- 1 root root   171 19. Sep 18:04 pamac-tray.desktop
-rw-r--r-- 1 root root   158 11. Jul 09:21 pamac-tray-plasma.desktop
-rw-r--r-- 1 root root  5096  1. Okt 11:19 pam_kwallet_init.desktop
-rw-r--r-- 1 root root  5161  1. Okt 01:13 polkit-kde-authentication-agent-1.desktop
-rw-r--r-- 1 root root  6592  1. Okt 01:14 powerdevil.desktop
-rw-r--r-- 1 root root  8405 10. Apr 2023  print-applet.desktop
-rw-r--r-- 1 root root   224 18. Sep 18:54 snap-userd-autostart.desktop
-rw-r--r-- 1 root root   371 11. Aug 14:19 vboxclient.desktop
-rw-r--r-- 1 root root   208 14. Sep 23:30 xapp-sn-watcher.desktop
-rw-r--r-- 1 root root  1586  1. Okt 01:09 xembedsniproxy.desktop

and

total 8
-rw-r--r-- 1 creapermann creapermann 124 26. Okt 14:07 Flameshot.desktop
-rw-r--r-- 1 creapermann creapermann 190 26. Okt 17:11 org.moson.matray.desktop

Respectively

[Creapermann]

No output

[soundofthunder]

Then, no problem.

There was a recent issue with udisks2. This only confirms you’re not affected by it.

[Mirdarthos]

I don’t see:

ls -l ~/.config/plasma-workspace/env

[Creapermann]

Its the first value I provided in single ` (total 0)

[Mirdarthos]

Ah, my mistake then, sorry.

It does not change my observation, though. Which is

Sorry.

[cscs]

We can try and look again a little differently:

systemd-analyze plot > plot.svg

[MAYBL8]

Don’t know if it will help but I had a similar issue and solved it here:

How to troubleshoot system slow to finish loading desktop?

First look at the info below to see if this seems slow. What I am noticing is there is a bit of a delay to show desktop icons and previous loaded windows after I see the wallpaper on startup. I created a new user and it doesn’t seem to do it there. So I know it has something to so with the user. How do I go about finding what the culprit is? Here is some info: [demo@Manjaro ~]$ systemd-analyze Startup finished in 3.455s (firmware) + 3.025s (loader) + 896ms (kernel) + 645ms (initrd) + 1min …

It was the “action menu” placed in the titlebar. I removed it and all is fine

[Creapermann]

I can’t upload the svg here, so I uploaded it to ufile.com: Upload files for free - plot.svg - ufile.io

[Zesko]

Manjaro takes a long time to load after login

Try creating a new KDE user and logging in to see if the issue is reproducible.