Thanks for this nice setup! One thing that’s a problem for me and I couldn’t google its solution is, that I leave my computer and when I come back my session is ended and I’m logged out, i.e. I find myself in the display manager. Is this a known issue or even a feature? If so how could I prevent this. (I don’t mean a lock screen but being logged out.) Thanks for any help.
Well, that sounds inconvenient;
Perhaps the relevant settings need a tweak or two.
I’m not a Sway user, so where those specific settings might be, I can’t say. Nonetheless, I’m sure someone will help when they are able.
In the meantime, please provide system information as described (below), and take some time to learn a little about the forum (useful links also below).
Regards.
Welcome to the Manjaro community
As a new or infrequent forum user, please take some time to familiarise yourself with Forum requirements, and the many ways to use the forum to your benefit:
Update Announcements
The Update Announcements contain important information and a Known Issues and Solutions section that should generally be checked before posting a request for support.
System Information
While information from *-fetch type apps might be fine for someone wishing to buy your computer, for Support purposes it’s better to ask your system directly; 
Output of the inxi command with appropriate parameters will achieve this (naturally, formatted according to forum guidelines) and will generally be more useful for those wishing to help:
inxi --filter --verbosity=8
or the short form:
inxi -zv8
- inxi man pages (Arch Manual)
Be prepared to provide output from other commands whenever asked. It’s equally important to provide as much actionable information as possible in your first post, rather than simply indicating there is a problem.
Highly Recommended
Required Reading
Technical Resources
In the meantime, please provide system information as described (below)
System:
Kernel: 6.6.88-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
root=UUID=df430096-4fc2-465d-ba66-f1f4f2c677af rw quiet apparmor=1
security=apparmor resume=UUID=776258ea-507a-4363-b0cd-292e63ba2e05
udev.log_priority=3
Desktop: Sway v: 1.10.1 with: waybar tools: swayidle avail: swaylock vt: 2
lm: greetd Distro: Manjaro base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 21MACTO1WW v: ThinkPad E16 Gen 2
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 21MACTO1WW serial: <superuser required>
part-nu: LENOVO_MT_21MA_BU_Think_FM_ThinkPad E16 Gen 2
uuid: <superuser required> UEFI: LENOVO v: R2JET39W(1.16 )
date: 12/23/2024
Battery:
ID-1: BAT0 charge: 58.8 Wh (100.0%) condition: 58.8/57.0 Wh (103.1%)
volts: 13.1 min: 11.3 model: Sunwoda L23D3PG2 type: Li-poly serial: <filter>
status: full cycles: 1
Memory:
System RAM: total: 32 GiB available: 30.82 GiB used: 4.76 GiB (15.4%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 64 GiB slots: 2 modules: 2 EC: None
max-module-size: 32 GiB note: est.
Device-1: Controller0-ChannelA-DIMM0 type: DDR5 detail: synchronous
size: 16 GiB speed: 5600 MT/s volts: curr: 1 width (bits): data: 64
total: 64 manufacturer: Samsung part-no: M425R2GA3EB0-CWMOL
serial: <filter>
Device-2: Controller1-ChannelA-DIMM0 type: DDR5 detail: synchronous
size: 16 GiB speed: 5600 MT/s volts: curr: 1 width (bits): data: 64
total: 64 manufacturer: Samsung part-no: M425R2GA3EB0-CWMOL
serial: <filter>
PCI Slots:
Missing: Required tool dmidecode not installed. Check --recommends
CPU:
Info: model: Intel Core Ultra 7 155H bits: 64 type: MST AMCP
arch: Meteor Lake level: v3 note: check built: 2023+ process: Intel 4 (7nm)
family: 6 model-id: 0xAA (170) stepping: 4 microcode: 0x20
Topology: cpus: 1x dies: 1 clusters: 9 cores: 16 threads: 22 mt: 6 tpc: 2
st: 10 smt: enabled cache: 24 MiB note: check
Speed (MHz): avg: 3627 min/max: 400/4400:4700:3800:2500 scaling:
driver: intel_pstate governor: performance cores: 1: 3627 2: 3627 3: 3627
4: 3627 5: 3627 6: 3627 7: 3627 8: 3627 9: 3627 10: 3627 11: 3627 12: 3627
13: 3627 14: 3627 15: 3627 16: 3627 17: 3627 18: 3627 19: 3627 20: 3627
21: 3627 22: 3627 bogomips: 131824
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
bts bus_lock_detect clflush clflushopt clwb cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp
hwp_act_window hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt
ida intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe
movdir64b movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid
pclmulqdq pdcm pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid
rdrand rdseed rdtscp rep_good sdbg sep serialize sha_ni smap smep smx
split_lock_detect ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm
tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip
user_shstk vaes vme vmx vnmi vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave
xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
conditional; RSB filling; PBRSB-eIBRS: Not affected; BHI: BHI_DIS_S
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Meteor Lake-P [Intel Arc Graphics] vendor: Lenovo
driver: i915 v: kernel arch: Xe-LPG process: Intel 4 (7nm+) built: 2023+
ports: active: HDMI-A-1,eDP-1 empty: DP-1, DP-2, DP-3, DP-4
bus-ID: 00:02.0 chip-ID: 8086:7d55 class-ID: 0300
Device-2: Luxvisions Innotech Integrated RGB Camera driver: uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:3
chip-ID: 30c9:00c2 class-ID: fe01 serial: <filter>
Display: wayland server: Xwayland v: 24.1.6 compositor: Sway v: 1.10.1
driver: gpu: i915 d-rect: 6000x3040 display-ID: 1
Monitor-1: HDMI-A-1 pos: primary,top-left model: Lenovo G34w-30
serial: <filter> built: 2022 res: mode: 3440x1440 hz: 60 scale: 112% (1.12)
to: 3057x1280 dpi: 110 gamma: 1.2 chroma: red: x: 0.675 y: 0.310 green:
x: 0.275 y: 0.655 blue: x: 0.153 y: 0.075 white: x: 0.314 y: 0.329
size: 797x334mm (31.38x13.15") diag: 864mm (34") modes: 3440x1440,
2560x1440, 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x720,
1024x768, 800x600, 720x576, 720x480, 640x480, 720x400
EDID-Warnings: 1: parse_edid: unhandled CEA mode 76
Monitor-2: eDP-1 pos: bottom-r model: California Institute of 0x160E
built: 2021 res: mode: 2560x1600 hz: 60 scale: 150% (1.5) to: 1706x1066
dpi: 189 gamma: 1.2 chroma: red: x: 0.647 y: 0.329 green: x: 0.298
y: 0.596 blue: x: 0.137 y: 0.059 white: x: 0.310 y: 0.329
size: 344x215mm (13.54x8.46") diag: 406mm (16") ratio: 16:10
modes: 2560x1600
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Info: Tools: de: kscreen-doctor wl: swaymsg, way-displays, wdisplays
x11: xprop
Audio:
Device-1: Intel Meteor Lake-P HD Audio vendor: Lenovo
driver: sof-audio-pci-intel-mtl
alternate: snd_hda_intel,snd_sof_pci_intel_mtl bus-ID: 00:1f.3
chip-ID: 8086:7e28 class-ID: 0401
API: ALSA v: k6.6.88-1-MANJARO status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 1.4.2 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Meteor Lake PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:7e40 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: Intel vendor: Lenovo driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:550b class-ID: 0200
IF: enp0s31f6 state: down mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:5 chip-ID: 8087:0026
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 5.2
lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.84 TiB used: 51.57 GiB (2.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: HFS001TEM4X169N
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 61700A30 temp: 33.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: SSK model: Portable SSD 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: SSD serial: <filter>
fw-rev: 1000 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 100 GiB size: 97.87 GiB (97.87%) used: 21.28 GiB (21.7%)
fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 label: linux
uuid: df430096-4fc2-465d-ba66-f1f4f2c677af
ID-2: /boot/efi raw-size: 4 GiB size: 3.99 GiB (99.80%)
used: 312 KiB (0.0%) fs: vfat dev: /dev/nvme0n1p5 maj-min: 259:5 label: N/A
uuid: 7AF4-B212
ID-3: /data raw-size: 634.87 GiB size: 623.83 GiB (98.26%)
used: 30.3 GiB (4.9%) fs: ext4 dev: /dev/nvme0n1p4 maj-min: 259:4
label: data uuid: 57895ec8-8b1b-4b9e-9eed-67dc14404b02
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:3 label: swap
uuid: 776258ea-507a-4363-b0cd-292e63ba2e05
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 150 GiB fs: ntfs label: windows
uuid: 10A6C04B0BAF1396
ID-2: /dev/sda1 maj-min: 8:1 size: 585.94 GiB fs: ext4 label: N/A
uuid: 284aa97a-6786-488c-b5e1-2b6fb134b192
ID-3: /dev/sda2 maj-min: 8:2 size: 345.57 GiB fs: vfat label: N/A
uuid: 950E-64A8
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-6:2 info: Shenzhen Goodix USB2.0 MISC type: <vendor specific>
driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 100mA chip-ID: 27c6:659a class-ID: ef00 serial: <filter>
Device-2: 3-7:3 info: Luxvisions Innotech Integrated RGB Camera
type: video driver: uvcvideo interfaces: 5 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 30c9:00c2 class-ID: fe01 serial: <filter>
Device-3: 3-10:5 info: Intel AX201 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0026 class-ID: e001
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Device-1: 4-1:2 info: Silicon Motion - Taiwan (formerly Feiya ) SSK SSD
type: mass storage driver: uas interfaces: 1 rev: 3.2
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA
chip-ID: 090c:2320 class-ID: 0806 serial: <filter>
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (rpm): fan-1: 0 fan-2: 0
Processes:
CPU top: 5 of 404
1: cpu: 3.2% command: firefox pid: 8412 mem: 589.6 MiB (1.8%)
2: cpu: 2.7% command: firefox pid: 14598 mem: 773.2 MiB (2.4%)
3: cpu: 0.6% command: firefox pid: 8616 mem: 174.1 MiB (0.5%)
4: cpu: 0.5% command: firefox pid: 15594 mem: 260.2 MiB (0.8%)
5: cpu: 0.4% command: sway pid: 7546 mem: 132.6 MiB (0.4%)
Memory top: 5 of 404
1: mem: 773.2 MiB (2.4%) command: firefox pid: 14598 cpu: 2.7%
2: mem: 589.6 MiB (1.8%) command: firefox pid: 8412 cpu: 3.2%
3: mem: 270.6 MiB (0.8%) command: firefox pid: 12171 cpu: 0.1%
4: mem: 260.2 MiB (0.8%) command: firefox pid: 15594 cpu: 0.5%
5: mem: 245.3 MiB (0.7%) command: firefox pid: 14137 cpu: 0.2%
Info:
Processes: 404 Power: uptime: 59m states: freeze,mem,disk suspend: s2idle
wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume
image: 12.32 GiB services: upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.37 running-in: alacritty
inxi: 3.3.38
Sounds to me like a broken suspend process. Manjaro’s Settings for Sway will lock your session after time and then suspend. Check the journal for more information.
1 Like
Sounds to me like a broken suspend process
suspending “by hand” is my current workaround; i.e. that seems to work.
Check the journal for more information
these where the error messages this morning (de) right after it happened
Mai 12 06:39:38 tp pcmanfm-qt[242466]: This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
it diddn’t
Available platform plugins are: wayland-egl, eglfs, wayland, xcb, minimal, vkkhrdisplay, offscreen, vnc, linuxfb, minimalegl.
Mai 12 06:39:38 tp systemd-coredump[242481]: [🡕] Process 242466 (pcmanfm-qt) of user 1000 dumped core.
Stack trace of thread 242466:
#0 0x00007ff9646a5624 n/a (libc.so.6 + 0x97624)
#1 0x00007ff96464bba0 raise (libc.so.6 + 0x3dba0)
#2 0x00007ff964633582 abort (libc.so.6 + 0x25582)
#3 0x00007ff964e910b5 n/a (libQt6Core.so.6 + 0x910b5)
#4 0x00007ff964e91f65 _ZNK14QMessageLogger5fatalEPKcz (libQt6Core.so.6 + 0x91f65)
#5 0x00007ff9656e217b n/a (libQt6Gui.so.6 + 0xe217b)
#6 0x00007ff9657915c8 _ZN22QGuiApplicationPrivate21createEventDispatcherEv (libQt6Gui.so.6 + 0x1915c8)
#7 0x00007ff964f5ec9d _ZN23QCoreApplicationPrivate4initEv (libQt6Core.so.6 + 0x15ec9d)
#8 0x00007ff96579165e _ZN22QGuiApplicationPrivate4initEv (libQt6Gui.so.6 + 0x19165e)
#9 0x00007ff9660f9c26 _ZN19QApplicationPrivate4initEv (libQt6Widgets.so.6 + 0xf9c26)
#10 0x0000557a3564c16d n/a (/usr/bin/pcmanfm-qt + 0x2416d)
#11 0x00007ff964635488 n/a (libc.so.6 + 0x27488)
#12 0x00007ff96463554c __libc_start_main (libc.so.6 + 0x2754c)
#13 0x0000557a3564f675 n/a (/usr/bin/pcmanfm-qt + 0x27675)
Stack trace of thread 242468:
#0 0x00007ff9646abbe2 n/a (libc.so.6 + 0x9dbe2)
#1 0x00007ff96469fe33 n/a (libc.so.6 + 0x91e33)
#2 0x00007ff96469fe74 n/a (libc.so.6 + 0x91e74)
#3 0x00007ff96471aa06 ppoll (libc.so.6 + 0x10ca06)
#4 0x00007ff965569f67 n/a (libglib-2.0.so.0 + 0xc1f67)
#5 0x00007ff965505615 g_main_context_iteration (libglib-2.0.so.0 + 0x5d615) #6 0x00007ff9651cd59d _ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE (libQt6Core.so.6 + 0x3cd59d)
#7 0x00007ff964f65376 _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE (libQt6Core.so.6 + 0x165376)
#8 0x00007ff96505a4b9 _ZN7QThread4execEv (libQt6Core.so.6 + 0x25a4b9)
#9 0x00007ff96684f8de n/a (libQt6DBus.so.6 + 0x2e8de)
#10 0x00007ff9650e44ff n/a (libQt6Core.so.6 + 0x2e44ff)
#11 0x00007ff9646a3708 n/a (libc.so.6 + 0x95708)
#12 0x00007ff964727aac n/a (libc.so.6 + 0x119aac)
ELF object binary architecture: AMD x86-64
Mai 12 06:39:38 tp foot[242517]: server: failed to read socket option from passed file descriptor: Socket operation on non-socket
Mai 12 06:39:38 tp foot[242517]: fdm: failed to unregister FD=5 from epoll: Bad file descriptor
Mai 12 06:39:38 tp foot[242517]: fdm: failed to unregister FD=4 from epoll: Bad file descriptor
Mod edit: Please always place code or command output within a preformatted text box. See links previously given to learn how. Corrected for you, this once. No charge.