Manjaro keeps crashing and rebooting when playing video stream

Support
15

No, just 1080p or maybe 720p.
It crashed again just now.

sensors                                                            ✔ 
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:            N/A  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +66.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +66.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +57.0°C  (high = +100.0°C, crit = +100.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

nct6779-isa-0a20
Adapter: ISA adapter
Vcore:                   1.08 V  (min =  +0.00 V, max =  +1.74 V)
in1:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
AVCC:                    3.31 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:                   3.31 V  (min =  +2.98 V, max =  +3.63 V)
in4:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
in5:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
in6:                   280.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                    3.33 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:                    3.18 V  (min =  +2.70 V, max =  +3.63 V)
in9:                   888.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                  160.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                  144.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                  952.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                    1.20 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                  176.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                     0 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
SYSTIN:                +112.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:                +127.5°C  (high = +80.0°C, hyst = +75.0°C)  ALARM  sensor = CPU diode
AUXTIN0:                +69.0°C    sensor = thermistor
AUXTIN1:               +105.0°C    sensor = thermistor
AUXTIN2:               +105.0°C    sensor = thermistor
AUXTIN3:                +11.0°C    sensor = thermal diode
PECI Agent 0:           +66.0°C  
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
intrusion0:            OK
intrusion1:            ALARM
beep_enable:           disabled

pch_skylake-virtual-0
Adapter: Virtual device
temp1:        +49.0°C  

journalctl -b-1 -p5 --no-pager | grep pcieport //comes up empty

journalctl -b-1 -p5 --no-pager  0|1 ✘
Okt 26 14:13:50 catull-mnj kernel: Linux version 5.15.74-3-MANJARO (builduser@fv-az457-508) (gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2
.39.0) #1 SMP PREEMPT Sat Oct 15 13:39:11 UTC 2022
Okt 26 14:13:50 catull-mnj kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64 root=UUID=284f4666-64db-4384-ab26-e7f9c5c
fbf37 rw pci=nomsi quiet apparmor=1 security=apparmor resume=UUID=e122d88c-a50c-4de1-8fc0-c6ad9f279737 udev.log_priority=3
Okt 26 14:13:50 catull-mnj kernel: Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64", will be passed to us
er space.
Okt 26 14:13:50 catull-mnj kernel: x86/cpu: SGX disabled by BIOS.
Okt 26 14:13:50 catull-mnj kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admi
n-guide/hw-vuln/mds.html for more details.
Okt 26 14:13:50 catull-mnj kernel: MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html
/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
Okt 26 14:13:50 catull-mnj kernel: #3
Okt 26 14:13:50 catull-mnj kernel: audit: type=2000 audit(1666786417.013:1): state=initialized audit_enabled=0 res=1
Okt 26 14:13:50 catull-mnj kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

Okt 26 14:13:50 catull-mnj kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Okt 26 14:13:50 catull-mnj kernel: SCSI subsystem initialized
Okt 26 14:13:50 catull-mnj kernel: VFS: Disk quotas dquot_6.6.0
Okt 26 14:13:50 catull-mnj kernel: Initialise system trusted keyrings
Okt 26 14:13:50 catull-mnj kernel: Key type blacklist registered
Okt 26 14:13:50 catull-mnj kernel: Key type asymmetric registered
Okt 26 14:13:50 catull-mnj kernel: Asymmetric key parser 'x509' registered
Okt 26 14:13:50 catull-mnj kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330
)
Okt 26 14:13:50 catull-mnj kernel: ACPI Error: Aborting method \_PR.CPU1._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-5
29)
Okt 26 14:13:50 catull-mnj kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330
)
Okt 26 14:13:50 catull-mnj kernel: ACPI Error: Aborting method \_PR.CPU2._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-5
29)
Okt 26 14:13:50 catull-mnj kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330
)
Okt 26 14:13:50 catull-mnj kernel: ACPI Error: Aborting method \_PR.CPU3._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-5
29)
Okt 26 14:13:50 catull-mnj kernel: hpet_acpi_add: no address or irqs in _CRS
Okt 26 14:13:50 catull-mnj kernel: Loading compiled-in X.509 certificates
Okt 26 14:13:50 catull-mnj kernel: Loaded X.509 cert 'Build time autogenerated kernel key: a726d2fcedec7de7f1bb21d56ff6b06afad1c930'
Okt 26 14:13:50 catull-mnj kernel: Key type ._fscrypt registered
Okt 26 14:13:50 catull-mnj kernel: Key type .fscrypt registered
Okt 26 14:13:50 catull-mnj kernel: Key type fscrypt-provisioning registered
Okt 26 14:13:50 catull-mnj kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (2021
0730/psargs-330)
Okt 26 14:13:50 catull-mnj kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20210730
/psparse-529)
Okt 26 14:13:50 catull-mnj kernel: ata1.00: supports DRM functions and may not be fully accessible

Okt 26 14:13:50 catull-mnj kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (2021
0730/psargs-330)
Okt 26 14:13:50 catull-mnj kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20210730
/psparse-529)
Okt 26 14:13:50 catull-mnj kernel: ata1.00: supports DRM functions and may not be fully accessible

Okt 26 14:13:50 catull-mnj kernel: scsi 0:0:0:0: Direct-Access ATA CT2000MX500SSD1 033 PQ: 0 ANSI: 5
Okt 26 14:13:50 catull-mnj kernel: sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
Okt 26 14:13:50 catull-mnj kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Okt 26 14:13:50 catull-mnj kernel: sd 0:0:0:0: [sda] Write Protect is off
Okt 26 14:13:50 catull-mnj kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Okt 26 14:13:50 catull-mnj kernel: sd 0:0:0:0: [sda] supports TCG Opal
Okt 26 14:13:50 catull-mnj kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Okt 26 14:13:50 catull-mnj kernel: scsi 1:0:0:0: Direct-Access Generic- SD/MMC/MS PRO 1.00 PQ: 0 ANSI: 4
Okt 26 14:13:50 catull-mnj kernel: sd 1:0:0:0: [sdb] Media removed, stopped polling
Okt 26 14:13:50 catull-mnj kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Okt 26 14:13:50 catull-mnj systemd-fstab-generator[227]: Mount point swap is not a valid path, ignoring.

Okt 26 14:13:50 catull-mnj kernel: random: lvm: uninitialized urandom read (4 bytes read)
Okt 26 14:13:50 catull-mnj kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Okt 26 14:13:50 catull-mnj kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Okt 26 14:13:50 catull-mnj kernel: audit: type=1130 audit(1666786430.081:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfine
d msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:13:50 catull-mnj kernel: audit: type=1130 audit(1666786430.088:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfine
d msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:13:50 catull-mnj systemd-random-seed[253]: Kernel entropy pool is not initialized yet, waiting until it is.
Okt 26 14:13:50 catull-mnj kernel: vboxdrv: loading out-of-tree module taints kernel.

Okt 26 14:13:50 catull-mnj kernel: vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
Okt 26 14:13:50 catull-mnj kernel: audit: type=1130 audit(1666786430.101:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfine
d msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:13:50 catull-mnj kernel: VBoxNetAdp: Successfully started.
Okt 26 14:13:50 catull-mnj kernel: audit: type=1400 audit(1666786430.151:5): apparmor="STATUS" operation="profile_load" profile="uncon
fined" name="lsb_release" pid=260 comm="apparmor_parser"
Okt 26 14:13:50 catull-mnj kernel: audit: type=1300 audit(1666786430.151:5): arch=c000003e syscall=1 success=yes exit=30921 a0=6 a1=55
cc0519a060 a2=78c9 a3=0 items=0 ppid=258 pid=260 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) se
s=4294967295 comm="apparmor_parser" exe="/usr/bin/apparmor_parser" subj=unconfined key=(null)
Okt 26 14:13:50 catull-mnj kernel: audit: type=1327 audit(1666786430.151:5): proctitle=2F7362696E2F61707061726D6F725F706172736572002D2
D7265706C616365002D2D002F6574632F61707061726D6F722E64
Okt 26 14:13:50 catull-mnj kernel: VBoxNetFlt: Successfully started.
Okt 26 14:13:50 catull-mnj kernel: audit: type=1400 audit(1666786430.208:6): apparmor="STATUS" operation="profile_load" profile="uncon
fined" name="mariadbd_akonadi" pid=261 comm="apparmor_parser"
Okt 26 14:13:50 catull-mnj kernel: audit: type=1300 audit(1666786430.208:6): arch=c000003e syscall=1 success=yes exit=39521 a0=6 a1=55
cc05202870 a2=9a61 a3=0 items=0 ppid=258 pid=261 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) se
s=4294967295 comm="apparmor_parser" exe="/usr/bin/apparmor_parser" subj=unconfined key=(null)
Okt 26 14:13:50 catull-mnj kernel: audit: type=1327 audit(1666786430.208:6): proctitle=2F7362696E2F61707061726D6F725F706172736572002D2
D7265706C616365002D2D002F6574632F61707061726D6F722E64
Okt 26 14:13:50 catull-mnj kernel: audit: type=1400 audit(1666786430.254:7): apparmor="STATUS" operation="profile_load" profile="uncon
fined" name="nvidia_modprobe" pid=274 comm="apparmor_parser"
Okt 26 14:13:51 catull-mnj kernel: random: tlp-readconfs: uninitialized urandom read (4 bytes read)
Okt 26 14:13:51 catull-mnj kernel: random: tlp-readconfs: uninitialized urandom read (4 bytes read)
Okt 26 14:13:51 catull-mnj kernel: random: crng init done
Okt 26 14:13:51 catull-mnj kernel: e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): Failed to initialize MSI interrupts. Falling bac
k to legacy interrupts.
Okt 26 14:13:51 catull-mnj kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Okt 26 14:13:51 catull-mnj kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Okt 26 14:13:52 catull-mnj kernel: iwlwifi 0000:02:00.0: pci_enable_msi failed - -22

Okt 26 14:13:52 catull-mnj polkitd[592]: Loading rules from directory /etc/polkit-1/rules.d
Okt 26 14:13:52 catull-mnj polkitd[592]: Loading rules from directory /usr/share/polkit-1/rules.d
Okt 26 14:13:52 catull-mnj kernel: thermal thermal_zone3: failed to read out thermal zone (-61)

Okt 26 14:13:52 catull-mnj polkitd[592]: Finished loading, compiling and executing 7 rules
Okt 26 14:13:52 catull-mnj polkitd[592]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Okt 26 14:13:52 catull-mnj kernel: i915 0000:00:02.0: [drm] [ENCODER:107:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI cloc
k, gate it
Okt 26 14:13:53 catull-mnj kernel: snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up codec ret=[-13]

Okt 26 14:13:53 catull-mnj systemd[1020]: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 7
55 ConfigurationDirectoryMode: 555)
Okt 26 14:13:53 catull-mnj kernel: Bluetooth: hci0: unexpected event for opcode 0xfc2f

Okt 26 14:13:54 catull-mnj bluetoothd[1020]: Failed to set mode: Blocked through rfkill (0x12)

Okt 26 14:13:55 catull-mnj sddm-helper[1053]: pam_kwallet5(sddm-autologin:auth): pam_kwallet5: Couldn't get password (it is empty)
Okt 26 14:13:55 catull-mnj kernel: kauditd_printk_skb: 266 callbacks suppressed
Okt 26 14:13:55 catull-mnj kernel: audit: type=1100 audit(1666786435.441:128): pid=1053 uid=0 auid=4294967295 ses=4294967295 subj=unco
nfined msg='op=PAM:authentication grantors=pam_faillock,pam_shells,pam_permit acct="ben" exe="/usr/lib/sddm/sddm-helper" hostname=? ad
dr=? terminal=? res=success'
Okt 26 14:13:55 catull-mnj kernel: audit: type=1101 audit(1666786435.448:129): pid=1053 uid=0 auid=4294967295 ses=4294967295 subj=unco
nfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="ben" exe="/usr/lib/sddm/sddm-helper" hostname=? a
ddr=? terminal=? res=success'
Okt 26 14:13:55 catull-mnj kernel: audit: type=1103 audit(1666786435.451:130): pid=1053 uid=0 auid=4294967295 ses=4294967295 subj=unco
nfined msg='op=PAM:setcred grantors=pam_faillock,pam_shells,pam_permit acct="ben" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? te
rminal=? res=success'
Okt 26 14:13:55 catull-mnj kernel: audit: type=1006 audit(1666786435.451:131): pid=1053 uid=0 subj=unconfined old-auid=4294967295 auid
=1000 tty=(none) old-ses=4294967295 ses=1 res=1
Okt 26 14:13:55 catull-mnj kernel: audit: type=1300 audit(1666786435.451:131): arch=c000003e syscall=1 success=yes exit=4 a0=8 a1=7fff
fbddd770 a2=4 a3=7ffffbddd484 items=0 ppid=664 pid=1053 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) s
es=1 comm="sddm-helper" exe="/usr/lib/sddm/sddm-helper" subj=unconfined key=(null)
Okt 26 14:13:55 catull-mnj kernel: audit: type=1327 audit(1666786435.451:131): proctitle=2F7573722F6C69622F7364646D2F7364646D2D68656C7
06572002D2D736F636B6574002F746D702F7364646D2D6175746831626433343331362D616266622D343835642D393764662D636465373338313731353738002D2D696
40031002D2D7374617274002F7573722F6C69622F706C61736D612D646275732D72756E2D7365
Okt 26 14:13:55 catull-mnj kernel: audit: type=1130 audit(1666786435.491:132): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:13:55 catull-mnj systemd[1055]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user
] terminal=[] user=[ben] ruser=[<unknown>] rhost=[<unknown>]
Okt 26 14:13:55 catull-mnj kernel: audit: type=1101 audit(1666786435.498:133): pid=1055 uid=0 auid=4294967295 ses=4294967295 subj=unco
nfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="ben" exe="/usr/lib/systemd/systemd" hostname=? ad
dr=? terminal=? res=success'
Okt 26 14:13:55 catull-mnj kernel: audit: type=1103 audit(1666786435.498:134): pid=1055 uid=0 auid=4294967295 ses=4294967295 subj=unco
nfined msg='op=PAM:setcred grantors=? acct="ben" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
Okt 26 14:13:55 catull-mnj kernel: audit: type=1006 audit(1666786435.498:135): pid=1055 uid=0 subj=unconfined old-auid=4294967295 auid
=1000 tty=(none) old-ses=4294967295 ses=2 res=1
Okt 26 14:13:55 catull-mnj systemd-xdg-autostart-generator[1061]: /home/ben/.config/autostart/org.kde.yakuake.desktop:165: Unknown key
name 'TerminalOptions' in section 'Desktop Entry', ignoring.
Okt 26 14:13:55 catull-mnj systemd-xdg-autostart-generator[1061]: Configuration file /home/ben/.config/autostart/jetbrains-toolbox.des
ktop is marked executable. Please remove executable permission bits. Proceeding anyway.
Okt 26 14:13:56 catull-mnj systemd-xdg-autostart-generator[1088]: /home/ben/.config/autostart/org.kde.yakuake.desktop:165: Unknown key
name 'TerminalOptions' in section 'Desktop Entry', ignoring.
Okt 26 14:13:56 catull-mnj systemd-xdg-autostart-generator[1088]: Configuration file /home/ben/.config/autostart/jetbrains-toolbox.des
ktop is marked executable. Please remove executable permission bits. Proceeding anyway.
Okt 26 14:13:56 catull-mnj systemd[1055]: /run/user/1000/systemd/generator.late/app-org.kde.yakuake@autostart.service:18: WorkingDirec
tory= path is not absolute, ignoring:
Okt 26 14:13:57 catull-mnj udisksd[1102]: udisks daemon version 2.9.4 starting
Okt 26 14:13:57 catull-mnj udisksd[1102]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Okt 26 14:13:58 catull-mnj root[1165]: ACPI group/action undefined: jack/lineout / LINEOUT
Okt 26 14:13:58 catull-mnj root[1167]: ACPI group/action undefined: jack/videoout / VIDEOOUT
Okt 26 14:13:58 catull-mnj root[1169]: ACPI group/action undefined: jack/lineout / LINEOUT
Okt 26 14:13:58 catull-mnj root[1171]: ACPI group/action undefined: jack/videoout / VIDEOOUT
Okt 26 14:13:59 catull-mnj polkitd[592]: Registered Authentication Agent for unix-session:1 (system bus name :1.42 [/usr/lib/polkit-kd
e-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale de_AT.UTF-8)
Okt 26 14:13:59 catull-mnj pipewire[1268]: mod.rt: Can't find xdg-portal: (null)
Okt 26 14:13:59 catull-mnj pipewire[1268]: mod.rt: found session bus but no portal
Okt 26 14:13:59 catull-mnj pipewire-media-session[1269]: mod.rt: Can't find xdg-portal: (null)

Okt 26 14:13:59 catull-mnj pipewire-media-session[1269]: mod.rt: found session bus but no portal

Okt 26 14:14:00 catull-mnj systemd[1055]: app-ssh\x2dadd@autostart.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Okt 26 14:14:00 catull-mnj systemd[1055]: app-ssh\x2dadd@autostart.service: Failed with result 'exit-code'.

Okt 26 14:14:00 catull-mnj systemd[1055]: Failed to start ssh-add.
Okt 26 14:14:00 catull-mnj kernel: kauditd_printk_skb: 23 callbacks suppressed
Okt 26 14:14:00 catull-mnj kernel: audit: type=1130 audit(1666786440.664:153): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:14:00 catull-mnj systemd-xdg-autostart-generator[1454]: /home/ben/.config/autostart/org.kde.yakuake.desktop:165: Unknown key
name 'TerminalOptions' in section 'Desktop Entry', ignoring.
Okt 26 14:14:00 catull-mnj systemd-xdg-autostart-generator[1454]: Configuration file /home/ben/.config/autostart/jetbrains-toolbox.des
ktop is marked executable. Please remove executable permission bits. Proceeding anyway.
Okt 26 14:14:01 catull-mnj systemd[1055]: /run/user/1000/systemd/generator.late/app-org.kde.yakuake@autostart.service:18: WorkingDirec
tory= path is not absolute, ignoring:
Okt 26 14:14:01 catull-mnj pamac-tray-plas[1383]: updates_checker.vala:71: check updates
Okt 26 14:14:01 catull-mnj kernel: audit: type=1400 audit(1666786441.601:154): apparmor="DENIED" operation="open" profile="mariadbd_ak
onadi" name="/sys/block/" pid=1535 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
Okt 26 14:14:01 catull-mnj kernel: audit: type=1300 audit(1666786441.601:154): arch=c000003e syscall=257 success=no exit=-13 a0=ffffff
9c a1=556c3d0e85e0 a2=90800 a3=0 items=0 ppid=1482 pid=1535 auid=1000 uid=1000 gid=1001 euid=1000 suid=1000 fsuid=1000 egid=1001 sgid=
1001 fsgid=1001 tty=(none) ses=2 comm="mysqld" exe="/usr/bin/mariadbd" subj=mariadbd_akonadi (enforce) key=(null)
Okt 26 14:14:01 catull-mnj kernel: audit: type=1327 audit(1666786441.601:154): proctitle=2F7573722F62696E2F6D7973716C64002D2D646566617
56C74732D66696C653D2F686F6D652F62656E2F2E6C6F63616C2F73686172652F616B6F6E6164692F6D7973716C2E636F6E66002D2D646174616469723D2F686F6D652
F62656E2F2E6C6F63616C2F73686172652F616B6F6E6164692F64625F646174612F002D2D736F
Okt 26 14:14:01 catull-mnj kernel: audit: type=1400 audit(1666786441.618:155): apparmor="DENIED" operation="open" profile="mariadbd_ak
onadi" name="/sys/devices/pci0000:00/0000:00:17.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/queue/physical_block_size" pid=1535 comm="m
ysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
Okt 26 14:14:01 catull-mnj kernel: audit: type=1300 audit(1666786441.618:155): arch=c000003e syscall=257 success=no exit=-13 a0=ffffff
9c a1=7fffd33d3e10 a2=0 a3=0 items=0 ppid=1482 pid=1535 auid=1000 uid=1000 gid=1001 euid=1000 suid=1000 fsuid=1000 egid=1001 sgid=1001
fsgid=1001 tty=(none) ses=2 comm="mysqld" exe="/usr/bin/mariadbd" subj=mariadbd_akonadi (enforce) key=(null)
Okt 26 14:14:01 catull-mnj kernel: audit: type=1327 audit(1666786441.618:155): proctitle=2F7573722F62696E2F6D7973716C64002D2D646566617
56C74732D66696C653D2F686F6D652F62656E2F2E6C6F63616C2F73686172652F616B6F6E6164692F6D7973716C2E636F6E66002D2D646174616469723D2F686F6D652
F62656E2F2E6C6F63616C2F73686172652F616B6F6E6164692F64625F646174612F002D2D736F
Okt 26 14:14:02 catull-mnj kernel: audit: type=1131 audit(1666786442.941:156): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:14:04 catull-mnj pulseaudio[1643]: Modul »module-esound-protocol-tcp.so« konnte nicht geladen werden: module-esound-protocol
-tcp.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden
Okt 26 14:14:04 catull-mnj pulseaudio[1643]: Failed to open module "module-esound-protocol-tcp".

Okt 26 14:14:04 catull-mnj pulseaudio[1643]: pa_module_load() failed
Okt 26 14:14:04 catull-mnj pulseaudio[1643]: Failed to set scheduler settings: Die Operation ist nicht erlaubt

Okt 26 14:14:04 catull-mnj pulseaudio[1643]: stat('/etc/pulse/default.pa.d'): Datei oder Verzeichnis nicht gefunden

Okt 26 14:14:04 catull-mnj pulseaudio[1643]: Could not find org.bluez.BatteryProviderManager1.RegisterBatteryProvider(), is bluetoothd
started with experimental features enabled (-E flag)?
Okt 26 14:14:07 catull-mnj signal-desktop[1362]: Theme parsing error: gtk.css:68:35: The style property GtkButton:child-displacement-x
is deprecated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:14:07 catull-mnj signal-desktop[1362]: Theme parsing error: gtk.css:69:35: The style property GtkButton:child-displacement-y
is deprecated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:14:07 catull-mnj signal-desktop[1362]: Theme parsing error: gtk.css:73:46: The style property GtkScrolledWindow:scrollbars-w
ithin-bevel is deprecated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:14:18 catull-mnj pamac-tray-plas[1383]: updates_checker.vala:101: 0 updates found
Okt 26 14:14:23 catull-mnj kernel: audit: type=1131 audit(1666786463.878:157): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=systemd-timedated comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:14:23 catull-mnj kernel: audit: type=1334 audit(1666786463.891:158): prog-id=0 op=UNLOAD
Okt 26 14:14:23 catull-mnj kernel: audit: type=1334 audit(1666786463.891:159): prog-id=0 op=UNLOAD
Okt 26 14:14:23 catull-mnj kernel: audit: type=1334 audit(1666786463.891:160): prog-id=0 op=UNLOAD
Okt 26 14:14:26 catull-mnj kernel: audit: type=1131 audit(1666786466.561:161): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:14:26 catull-mnj kernel: audit: type=1334 audit(1666786466.628:162): prog-id=0 op=UNLOAD
Okt 26 14:14:26 catull-mnj kernel: audit: type=1334 audit(1666786466.628:163): prog-id=0 op=UNLOAD
Okt 26 14:14:26 catull-mnj kernel: audit: type=1334 audit(1666786466.628:164): prog-id=0 op=UNLOAD
Okt 26 14:14:34 catull-mnj kernel: audit: type=1131 audit(1666786474.474:165): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:14:34 catull-mnj kernel: audit: type=1334 audit(1666786474.534:166): prog-id=0 op=UNLOAD
Okt 26 14:14:34 catull-mnj kernel: audit: type=1334 audit(1666786474.534:167): prog-id=0 op=UNLOAD
Okt 26 14:14:34 catull-mnj kernel: audit: type=1334 audit(1666786474.534:168): prog-id=0 op=UNLOAD
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:68:35: The style property GtkButton:child-displacement-x is dep
recated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:69:35: The style property GtkButton:child-displacement-y is dep
recated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:73:46: The style property GtkScrolledWindow:scrollbars-within-b
evel is deprecated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:68:35: The style property GtkButton:child-displacement-x is dep
recated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:69:35: The style property GtkButton:child-displacement-y is dep
recated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:73:46: The style property GtkScrolledWindow:scrollbars-within-b
evel is deprecated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:68:35: The style property GtkButton:child-displacement-x is dep
recated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:69:35: The style property GtkButton:child-displacement-y is dep
recated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:16:14 catull-mnj firefox[2226]: Theme parsing error: gtk.css:73:46: The style property GtkScrolledWindow:scrollbars-within-b
evel is deprecated and shouldn't be used anymore. It will be removed in a future version
Okt 26 14:18:53 catull-mnj kernel: audit: type=1334 audit(1666786733.851:169): prog-id=25 op=LOAD
Okt 26 14:18:53 catull-mnj kernel: audit: type=1334 audit(1666786733.851:170): prog-id=26 op=LOAD
Okt 26 14:18:53 catull-mnj kernel: audit: type=1334 audit(1666786733.851:171): prog-id=27 op=LOAD
Okt 26 14:18:53 catull-mnj kernel: audit: type=1130 audit(1666786733.918:172): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=systemd-timedated comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:19:23 catull-mnj kernel: audit: type=1131 audit(1666786763.954:173): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=systemd-timedated comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:19:23 catull-mnj kernel: audit: type=1334 audit(1666786763.974:174): prog-id=0 op=UNLOAD
Okt 26 14:19:23 catull-mnj kernel: audit: type=1334 audit(1666786763.974:175): prog-id=0 op=UNLOAD
Okt 26 14:19:23 catull-mnj kernel: audit: type=1334 audit(1666786763.974:176): prog-id=0 op=UNLOAD
Okt 26 14:27:14 catull-mnj kernel: audit: type=1334 audit(1666787234.571:177): prog-id=0 op=UNLOAD
Okt 26 14:29:02 catull-mnj kernel: audit: type=1130 audit(1666787342.071:178): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 26 14:29:02 catull-mnj kernel: audit: type=1131 audit(1666787342.071:179): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfi
ned msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Is there really no way to show the exact messages that are displayed directly after the crash - and the next boot? “Hardware Error” is in there (but not in the logs I’m getting with journalctl), they look very much like the photo I posted above

I have a theory that the overheating could be due to brittle, old thermal paste on the CPU. Do you think that could be it? Maybe the passive cooling of this box was just never really good. What I already noticed when I first bought it is USB plugs got rather hot, meaning the ports are always hot…

16

provide logs from this:
sudo dmesg -l err,warn,emerg,alert,crit
the journal command should have logged those messages, but it doesnt, and have no idea why…

those machine check errors could be from overheating…
they could be also from some bios setting …
and passive cooling you mean it has no fan?

also install the 6.0.2 kernel from system settings …
open this file:
kate /etc/default/grub
and edit this line to look like this:
GRUB_TIMEOUT_STYLE=menu
save it and update grub:
sudo update-grub
this will show the grub menu during booting, for switching kernels…
reboot and test;
if you for what ever reason cant boot with the 6.0 kernel, in the grub menu/advanced options select the 5.15 kernel, but not the fallback one

17 
sudo dmesg -l err,warn,emerg,alert,crit                                                                                ✔ 
[    0.157323] x86/cpu: SGX disabled by BIOS.
[    0.159280] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.159280] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.159280]  #3
[    0.168241] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.427568] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330)
[    0.427577] ACPI Error: Aborting method \_PR.CPU1._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.427639] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330)
[    0.427645] ACPI Error: Aborting method \_PR.CPU2._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.427692] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330)
[    0.427698] ACPI Error: Aborting method \_PR.CPU3._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.432387] hpet_acpi_add: no address or irqs in _CRS
[    0.756535] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20210730/psargs-330)
[    0.756556] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.756576] ata1.00: supports DRM functions and may not be fully accessible
[    0.758209] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20210730/psargs-330)
[    0.758231] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.758251] ata1.00: supports DRM functions and may not be fully accessible
[   12.745022] systemd-fstab-generator[224]: Mount point swap is not a valid path, ignoring.
[   13.026998] vboxdrv: loading out-of-tree module taints kernel.
[   13.104125] VBoxNetAdp: Successfully started.
[   13.122661] VBoxNetFlt: Successfully started.
[   14.705158] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
[   15.122780] iwlwifi 0000:02:00.0: pci_enable_msi failed - -22
[   15.488046] thermal thermal_zone3: failed to read out thermal zone (-61)
[   16.330230] snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up codec ret=[-13]
[   18.557248] kauditd_printk_skb: 269 callbacks suppressed
[   23.563581] kauditd_printk_skb: 23 callbacks suppressed

Yes, no fan.

18

nothing in those dmesg logs…
so that passive cooling could be the issue, and also the old thermal paste, you should replace it…
so try with the 6.0 kernel to see how it works out…

19

6.0 kernel is at least booting fine. If it keeps happening, I’ll open up the box.

Btw is there a way to also exclude the GTK error msgs from the journal?
like Theme parsing error: gtk.css:68:35: , as they aren’t useful either, right?

20

Which actually leaves the original title question still unanswered :smile: I renamed this topic and made a new one just about the boot messages.

21

maybe its possible to exclude but dont know how… but you have there those audit messages, which are also not usefull, so go to system settings/systemd and under units search for this:
systemd-journald-audit.socket
auditd.service
right click on it and stop it, wait, right click on it and mask it

22

These are the boot messages displayed after the last crash:

Okt 26 20:40:00 catull-mnj kernel: mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 1: bf80000000000114
Okt 26 20:40:00 catull-mnj kernel: mce: [Hardware Error]: TSC 0 ADDR 45eda4780 MISC 86 
Okt 26 20:40:00 catull-mnj kernel: mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1666809595 SOCKET 0 APIC 2 microcode f0
23

Something very weird happens there, the System Settings window freezes (unresponsive, greyed out)

24

yes those are machine check errors, not good… and these messages are only displayed when a crash happens?

yes it freezes, so thats why i told you to wait when masking them …

25

Yes.

It freezes as soon as I right click it the first time (before stopping it)

26

its probably related to overheating…

so use commands to mask them:

sudo systemctl stop systemd-journald-audit.socket && sudo systemctl stop auditd.service

sudo systemctl mask systemd-journald-audit.socket && sudo systemctl mask auditd.service
27

Will open up the pc. Maybe add a thermal pad or two.

systemctl stop systemd-journald-audit.socket && sudo systemctl stop auditd.service                                                                                                         1 ✘  25s  
Failed to stop auditd.service: Operation refused, unit auditd.service may be requested by dependency only (it is configured to refuse manual start/stop).
See system logs and 'systemctl status auditd.service' for details.

Maybe that’s that reason why it didn’t work in the system settings GUI

28

yes do that …
interesting, i have those services masked…
so mask only the socket:

sudo systemctl stop systemd-journald-audit.socket
sudo systemctl mask systemd-journald-audit.socket
1 Like
29

So, I did this. Put fresh thermal paste on the CPU, swapped a couple old thermal pads and added one on the SSD.
Sadly, after a few days of peace and quiet, it crashed again just now when watching YouTube.
errors displayed:

Nov 06 15:46:47 catull-mnj kernel: mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 1: bf80000000000114
Nov 06 15:46:47 catull-mnj kernel: mce: [Hardware Error]: TSC 0 ADDR 45ecb3780 MISC 86 
Nov 06 15:46:47 catull-mnj kernel: mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1667746002 SOCKET 0 APIC 2 microcode f0

Temperatures:

    ~  sensor                                                       ✔ 
zsh: correct 'sensor' to 'sensors' [nyae]? y
nct6779-isa-0a20
Adapter: ISA adapter
Vcore:                 688.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
AVCC:                    3.31 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:                   3.31 V  (min =  +2.98 V, max =  +3.63 V)
in4:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
in5:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
in6:                   288.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                    3.34 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:                    3.18 V  (min =  +2.70 V, max =  +3.63 V)
in9:                   880.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                  176.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                  160.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                  952.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                    1.20 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                  192.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                     0 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
SYSTIN:                +109.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:                +127.5°C  (high = +80.0°C, hyst = +75.0°C)  ALARM  sensor = CPU diode
AUXTIN0:                +67.5°C    sensor = thermistor
AUXTIN1:               +103.0°C    sensor = thermistor
AUXTIN2:               +102.0°C    sensor = thermistor
AUXTIN3:                 +2.0°C    sensor = thermal diode
PECI Agent 0:           +56.0°C  
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
intrusion0:            OK
intrusion1:            ALARM
beep_enable:           disabled

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +54.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +54.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +54.0°C  (high = +100.0°C, crit = +100.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +66.0°C  

pch_skylake-virtual-0
Adapter: Virtual device
temp1:        +56.0°C

Which of these values are important for me?
The machine was comparatively cool to the touch on the outside, i.e. warm, but definitely not on the hot side, and cooler than normally under heavy load.

Do these facts still point to overheating as the cause of crashes?

30

this shows that the temps were not high, so maybe its not related to everheating…
did it only happens when watching videos?

31

That are “Machine Check Events”. Most likely it is RAM or CPU Cache issue. Most things can be corrected, but here it seems it is uncorrectable.

The error happens on the RAM Module of Bank 1, I guess. I would suggest checking the RAM :wink:

32

One time (but only one), it happened while I was doing something else, just browsing or sth., don’t remember…

33

what makes you guess this specific module?
Could it be faulty? Then the problem should go away just taking it out, no?

34

Well it is just a guess. It could be also the CPU cache. So I would suggest checking the RAM. If it is the CPU, then you have to replace the CPU.

So it happens on the second core while reading bf80000000000114 from RAM Module 1. When reading data from the RAM, the CPU checks if the data is correct and correct it if possible.