Manjaro does not show image in the monitors when i start the pc

toni96 · 4 April 2024 20:24

Hi! Im a new Manjaro User!

When I turn on the computer, no monitor shows an image, I have to change the connection of one monitor and connect it to the motherboard so that manjaro turns on, then the 2 monitors connected to the graphics card do show an image but the monitor that I have connected to the motherboard… If I want to see something on that monitor I have to change it back to the graphics card. When I turn the computer off and on again I have the same problem and I have to reconnect the monitor to the motherboard and then switch the connection again.

andreas85 · 5 April 2024 11:49

Welcome to Manjaro!

Please read the information behind this link. It will help you to post necessary information.

Please press the three dots … below your post and then press the

If you give us information about your system, we can see what we’re talking about and make better suggestions.
You can do this by using inxi in a terminal or in console.

sudo inxi --admin --verbosity=8 --filter --no-host --width --repos

Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.

Copy the output from inxi (including the command) and paste it into your post.

To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

Have you already for your problem in the forum ? (Wisdom lies in asking → listening → reading )

toni96 · 7 April 2024 16:22

System:
  Kernel: 6.6.25-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
    root=UUID=9f99d1cc-87a5-4077-8cfa-8d177909c701 rw nouveau.modeset=0 quiet
    splash udev.log_priority=3
  Desktop: KDE Plasma v: 5.27.11 tk: Qt v: N/A wm: kwin_x11 dm: SDDM
    Distro: Manjaro base: Arch Linux
Machine:
  Type: Desktop System: Gigabyte product: Z370P D3 v: N/A serial: N/A
  Mobo: Gigabyte model: Z370P D3-CF v: x.x serial: N/A
    uuid: 03d502e0-045e-054e-1206-6e0700080009 UEFI-[Legacy]: American Megatrends
    v: F2 date: 11/09/2017
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 16 GiB available: 15.5 GiB used: 2.83 GiB (18.3%)
  Array-1: capacity: 64 GiB slots: 4 modules: 2 EC: None
    max-module-size: 16 GiB note: est.
  Device-1: ChannelA-DIMM0 type: no module installed
  Device-2: ChannelA-DIMM1 type: DDR4 detail: synchronous unbuffered
    (unregistered) size: 8 GiB speed: 2133 MT/s volts: curr: 1.2 min: 1.2
    max: 1.2 width (bits): data: 64 total: 64 manufacturer: Corsair
    part-no: CMK16GX4M2E3200C16 serial: N/A
  Device-3: ChannelB-DIMM0 type: no module installed
  Device-4: ChannelB-DIMM1 type: DDR4 detail: synchronous unbuffered
    (unregistered) size: 8 GiB speed: 2133 MT/s volts: curr: 1.2 min: 1.2
    max: 1.2 width (bits): data: 64 total: 64 manufacturer: Corsair
    part-no: CMK16GX4M2E3200C16 serial: N/A
PCI Slots:
  Slot: 0 type: PCIe lanes: 16 status: in use info: J6B2 length: long
    volts: 3.3 bus-ID: 00:01.0 children: 1: 01:00.0 class-ID: 0300 type: display
    2: 01:00.1 class-ID: 0403 type: audio 3: 01:00.2 class-ID: 0c03
    type: serialbus 4: 01:00.3 class-ID: 0c80 type: serialbus
  Slot: 1 type: PCIe lanes: 1 status: in use info: J6B1 length: short
    volts: 3.3 bus-ID: 00:1c.3
  Slot: 2 type: PCIe lanes: 1 status: in use info: J6D1 length: short
    volts: 3.3 bus-ID: 00:1c.4
  Slot: 3 type: PCIe lanes: 1 status: in use info: J7B1 length: short
    volts: 3.3 bus-ID: 00:1c.5
  Slot: 4 type: PCIe lanes: 1 status: in use info: J8B4 length: short
    volts: 3.3 bus-ID: 00:1c.6
CPU:
  Info: model: Intel Core i5-8400 socket: LGA1151 (U3E1) note: check bits: 64
    type: MCP arch: Coffee Lake gen: core 8 level: v3 note: check built: 2018
    process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 0xA (10)
    microcode: 0xF4
  Topology: cpus: 1x cores: 6 smt: <unsupported> cache: L1: 384 KiB
    desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB L3: 9 MiB
    desc: 1x9 MiB
  Speed (MHz): avg: 1371 high: 1416 min/max: 800/4000 base/boost: 3800/8300
    scaling: driver: intel_pstate governor: powersave volts: 1.0 V
    ext-clock: 100 MHz cores: 1: 1381 2: 1403 3: 1366 4: 1416 5: 1358 6: 1303
    bogomips: 33613
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
    clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
    dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
    fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida
    intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr
    mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
    pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep
    smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
    tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic
    xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
    disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: disabled, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] vendor: Gigabyte
    driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
    ports: active: HDMI-A-1 empty: none bus-ID: 00:02.0 chip-ID: 8086:3e92
    class-ID: 0380
  Device-2: NVIDIA TU106 [GeForce RTX 2060 Rev. A] vendor: Gigabyte
    driver: nvidia v: 550.67 alternate: nouveau,nvidia_drm non-free: 545.xx+
    status: current (as of 2024-02; EOL~2026-12-xx) arch: Turing code: TUxxx
    process: TSMC 12nm FF built: 2018-2022 pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 01:00.0 chip-ID: 10de:1f08 class-ID: 0300
  Device-3: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-10.1:9
    chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Display: server: X.Org v: 21.1.12 with: Xwayland v: 23.2.5
    compositor: kwin_x11 driver: X: loaded: nvidia gpu: i915 display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 4480x1440 s-dpi: 108 s-size: 1054x342mm (41.50x13.46")
    s-diag: 1108mm (43.63")
  Monitor-1: not-matched mapped: DP-2 pos: bottom-l res: 1920x1080 dpi: 82
    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
  Monitor-2: not-matched mapped: DP-4 pos: primary,top-right res: 2560x1440
    hz: 144 dpi: 109 size: 597x336mm (23.5x13.23") diag: 685mm (26.97")
    modes: N/A
  API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
    drv: nvidia device: 1 drv: iris device: 3 drv: swrast gbm: drv: kms_swrast
    surfaceless: drv: nvidia x11: drv: nvidia inactive: wayland,device-2
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.67 glx-v: 1.4
    direct-render: yes renderer: NVIDIA GeForce RTX 2060/PCIe/SSE2
    memory: 5.86 GiB
  API: Vulkan v: 1.3.279 layers: 2 device: 0 type: discrete-gpu
    name: NVIDIA GeForce RTX 2060 driver: nvidia v: 550.67 device-ID: 10de:1f08
    surfaces: xcb,xlib device: 1 type: discrete-gpu
    name: NVIDIA GeForce RTX 2060 driver: nvidia v: 550.67 device-ID: 10de:1f08
    surfaces: xcb,xlib device: 2 type: integrated-gpu name: Intel UHD Graphics
    630 (CFL GT2) driver: mesa intel v: 24.0.2-manjaro1.1 device-ID: 8086:3e92
    surfaces: xcb,xlib
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3
    chip-ID: 8086:a2f0 class-ID: 0403
  Device-2: NVIDIA TU106 High Definition Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 01:00.1 chip-ID: 10de:10f9 class-ID: 0403
  Device-3: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-10.1:9
    chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Device-4: Corsair VOID ELITE Wireless Gaming Dongle
    driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-3:2 chip-ID: 1b1c:0a51 class-ID: 0300
  API: ALSA v: k6.6.25-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.0.3 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: d000 bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: br-5a71ce53bac4 state: up speed: 10000 Mbps duplex: unknown
    mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> virtual: proto kernel_ll scope: link
  IF-ID-2: docker0 state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-3: veth6503a19 state: up speed: 10000 Mbps duplex: full mac: <filter>
  IF-ID-4: vethd0aa8fd state: up speed: 10000 Mbps duplex: full mac: <filter>
  Info: services: NetworkManager,systemd-timesyncd
  WAN IP: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
    v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-9:7
    chip-ID: 0a12:0001 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 2.98 TiB used: 45.19 GiB (1.5%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT1000P3SSD8
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: P9CR311 temp: 29.9 C
    scheme: MBR
  SMART: yes health: PASSED on: 36d 9h cycles: 290
    read-units: 14,302,693 [7.32 TB] written-units: 6,733,046 [3.44 TB]
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102
    family: BarraCuda 3.5 (CMR) size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B sata: 3.0 speed: 6.0 Gb/s tech: HDD rpm: 7200
    serial: <filter> fw-rev: CC43 temp: 27 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 2y 119d 8h cycles: 3782
    read: 44.73 TiB written: 18.04 TiB Pre-Fail: attribute: Spin_Retry_Count
    value: 100 worst: 100 threshold: 97
  ID-3: /dev/sdb maj-min: 8:16 vendor: Toshiba model: MQ04UBF100 family: 2.5"
    HDD MQ04UBF... (USB 3.0) size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0
    sata: 3.3 speed: 3.0 Gb/s tech: HDD rpm: 5400 serial: <filter> fw-rev: 5438
    drive-rev: JU002U scheme: MBR
  SMART: yes state: disabled
  ID-4: /dev/sdc maj-min: 8:32 vendor: Crucial model: CT275MX300SSD4
    size: 256.17 GiB block-size: physical: 512 B logical: 512 B type: USB
    rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: SSD serial: <filter>
    fw-rev: 1.00 scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 150.96 GiB size: 147.53 GiB (97.73%)
    used: 45.16 GiB (30.6%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p3
    maj-min: 259:3 label: N/A uuid: 9f99d1cc-87a5-4077-8cfa-8d177909c701
  ID-2: /boot/efi raw-size: 579 MiB size: 579 MiB (100.00%)
    used: 30.6 MiB (5.3%) fs: ntfs block-size: 4096 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: Reservado para el sistema uuid: 18E688D5E688B492
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 779.99 GiB fs: ntfs label: N/A
    uuid: 325CBE805CBE3F03
  ID-2: /dev/sda1 maj-min: 8:1 size: 931.51 GiB fs: ntfs label: N/A
    uuid: 70DCB03BDCAFFA0C
  ID-3: /dev/sdb1 maj-min: 8:17 size: 931.51 GiB fs: ntfs label: Nuevo vol
    uuid: 7C660F83660F3D80
  ID-4: /dev/sdc1 maj-min: 8:33 size: 256.17 GiB fs: ntfs label: Nuevo vol
    uuid: AEE66225E661EE51
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-3:2 info: Corsair VOID ELITE Wireless Gaming Dongle
    type: audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4
    rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 1b1c:0a51 class-ID: 0300
  Device-2: 1-4:3 info: Corsair SCIMITAR RGB ELITE Gaming Mouse
    type: mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 300mA
    chip-ID: 1b1c:1b8b class-ID: 0300 serial: <filter>
  Hub-2: 1-7:4 info: Texas Instruments TUSB8041 4-Port Hub ports: 4 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0451:8142
    class-ID: 0900
  Device-1: 1-7.4:6 info: LG USA 27UP850 - WK.AEUDCSN External Monitor 4K
    type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 043e:9a39
    class-ID: 0300 serial: <filter>
  Device-2: 1-8:5 info: Holtek Ducky Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 100mA chip-ID: 04d9:0356 class-ID: 0300
  Device-3: 1-9:7 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
    type: bluetooth driver: btusb interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 0a12:0001
    class-ID: e001
  Hub-3: 1-10:8 info: Huasheng 4-port hub [Maxxter ACT-HUB2-4P HS8836 iSoul
    ultra-slim] ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 214b:7000 class-ID: 0900
  Device-1: 1-10.1:9 info: Logitech Webcam C310 type: video,audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Device-2: 1-10.3:10 info: Realtek RTL9210 M.2 NVME Adapter
    type: mass storage driver: usb-storage interfaces: 1 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 0bda:9210 class-ID: 0806 serial: <filter>
  Device-3: 1-10.4:11 info: Toshiba America MQ04UBF100 type: mass storage
    driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 500mA chip-ID: 0480:0900 class-ID: 0806
    serial: <filter>
  Hub-4: 2-0:1 info: super-speed hub ports: 10 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 2-7:2 info: Texas Instruments TUSB8041 4-Port Hub ports: 4 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0451:8140
    class-ID: 0900
  Hub-6: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-7: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 27.0 C mobo: N/A gpu: nvidia temp: 49 C
  Fan Speeds (rpm): N/A gpu: nvidia fan: 0%
Repos:
  Packages: pm: pacman pkgs: 1246 libs: 366 tools: pamac,yay pm: flatpak
    pkgs: 0
  Active pacman repo servers in: /etc/pacman.conf
    1: https://download.sublimetext.com/arch/stable/x86_64
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://ask4.mm.fcix.net/manjaro/stable/$repo/$arch
    2: https://mirrors.manjaro.org/repo/stable/$repo/$arch
    3: https://nocix.mm.fcix.net/manjaro/stable/$repo/$arch
    4: https://ftp.gwdg.de/pub/linux/manjaro/stable/$repo/$arch
    5: https://mirrors2.manjaro.org/stable/$repo/$arch
    6: https://mirror.erickochen.nl/manjaro/stable/$repo/$arch
Processes:
  CPU top: 5 of 267
  1: cpu: 16.8% command: chrome pid: 2902 mem: 229.0 MiB (1.4%)
  2: cpu: 12.0% command: chrome pid: 1955 mem: 358.2 MiB (2.2%)
  3: cpu: 8.5% command: chrome pid: 1998 mem: 283.4 MiB (1.7%)
  4: cpu: 8.3% command: kwin_x11 pid: 833 mem: 335.3 MiB (2.1%)
  5: cpu: 6.4% command: Xorg pid: 716 mem: 99.1 MiB (0.6%)
  Memory top: 5 of 267
  1: mem: 427.1 MiB (2.6%) command: plasmashell pid: 864 cpu: 3.0%
  2: mem: 358.2 MiB (2.2%) command: chrome pid: 1955 cpu: 12.0%
  3: mem: 335.3 MiB (2.1%) command: kwin_x11 pid: 833 cpu: 8.3%
  4: mem: 283.4 MiB (1.7%) command: chrome pid: 1998 cpu: 8.5%
  5: mem: 247.3 MiB (1.5%) command: chrome pid: 2085 cpu: 2.3%
Info:
  Processes: 267 Power: uptime: 8m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 6.19 GiB services: org_kde_powerdevil,
    power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical
    tool: systemctl
  Compilers: clang: 16.0.6 gcc: 13.2.1 Shell: Sudo (sudo) v: 1.9.15p5
    default: Bash v: 5.2.26 running-in: konsole inxi: 3.3.33

Olli · 7 April 2024 16:30

post the output of

echo $XDG_SESSION_TYPE && glxinfo | grep server

make sure you’re on x11. sgi is the internal intel-gpu

the external displays are proper controlled with nvidia. therefore switch to nvidia

pamac install envycontrol

sudo envycontrol -s nvidia

reboot and report

toni96 · 7 April 2024 21:07

echo $XDG_SESSION_TYPE && glxinfo | grep server                                                                       ✔ 

x11
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
server glx extensions:

Olli · 8 April 2024 11:11

monitors recognized now ? problem solved ?

toni96 · 8 April 2024 14:52

Thank you very much!! <3

system · 10 April 2024 02:53

This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed.