A post was merged into an existing topic: [Stable Update] 2024-05-18 - Linux-Firmware, PHP, Gitlab, Qt6
@philm Was there any deeper thinking behind the name Wynsdey than a mis-spelling of the day you thought of it?
There are times when all the world’s asleep, the questions run too deep for such a simple man…
– Supertramp (1979)
Stolen from @Aragorn
2 Likes
All I could find was that in Star Trek, Wynsdey III was the third inhabited planet of the Memory Alpha system. It was however only mentioned during writing.
2 Likes
It sounds quite interesting and makes no sense which is probably the whole point.
5 posts were merged into an existing topic: [Stable Update] 2024-05-18 - Linux-Firmware, PHP, Gitlab, Qt6
One observation: only a small percentage of the checksum links (in this thread) have been clicked versus the .ISO links … 
1 Like
Folks, comments in the thread should be about feedback regarding the ISOs and fresh installs, not updating from existing installs. I’ve had to move multiple replies to the proper Stable Updates thread.
2 Likes
Fresh install in my case is the Manjaro GNOME .ISO in VirtualBox. Works well so far with my experimentation/testing. I didn’t install an office suite or a few other things I won’t need for VB testing.
The only issue I’ve had is I found it locks up after a while in (U)EFI mode but that seemingly isn’t a Manjaro issue rather a VirtualBox problem (same thing happens with EndeavourOS and Manjaro KDE).
Also my issue of being a Gnome “Virgin” and as yet have no idea how to find my way around it! Totally alien to me. (Installed it to see if might be useful for “helping” on here).
You will be quite surprised checking all previous Manjaro versions names…
3 Likes
Wasn’t “Vulcan” a dead giveaway? 
LLAP...
4 Likes
So I managed to get up-to-date and running nvidia-390 with Plasma 6 [and even Wayland (but only @480p)] with kernels 61, 65, 66, 69.
The last and only iso I could do it with was manjaro-kde-23.0.4-231015-linux65.iso
The ones before it might be doable, but you run into dependency-cycle issues with plasma5>plasma6 packages on pamac/pacman.
The ones after, the isos came with linux66 or newer and proprietary installs (my graphics card is NVIDIA GF119M [GeForce 410M]) would not boot past the logo on the 66+ kernels.
As this might be scaring off “new users on older hardware” I believe this is useful info for devs here.
There must have been some changes in either Calamares, or possibly Mhwd from the 23.0.4 to the 23.1.0 release! Sddm I don’t think is an issue as I selected auto-login on boot in Calamares.
As this is not only concerning this Wynsdey release I can provide info in the thread I opened here for the issue: Nvidia 390 not working with kernel 66 on new install?
Btw, where can I find the plasma-to-defaults.sh script kindly provided by @linux-aarhus ?
2 Likes
Oh no - I see trouble ahead…
1 Like
They have all been celestial bodies. Planets. And stars in some cases I think?
( in the Star Trek universe 
)
1 Like
Vulcan, in particular; both a planet (homeworld of Spock) and part of the Star Trek Universe. Some little-known trivia is that Vulcan was once thought to be an actual planet (or planetesimal) within our own non-fictional star system; a hypothetical planet claimed to have been discovered in orbit between Sol and Mercury (though never rediscovered or confirmed). Here’s another fun fact.
Linux distribution code names have always amused me. In particular, Debian, with it’s “Toy Story” theme. I’m still waiting for any distribution to choose “Wascally Wabbit” as a code name.
1 Like
Trouble? Why, I think Grand Nagus Zek would make a fine name for a release.
2 Likes
Article in distrowatch about Manjaro: DistroWatch.com: Put the fun back into computing. Use Linux, BSD.
1 Like
It was a long time since I had installed Manjaro. I decided to reinstall it on my old desktop, since it was a bit of a mess.
I used the default installer with manual partitioning, since I use a bunch of lvm volumes and wanted to keep the layout.
Everything went fine, first boost froze, maybe something related to Wayland, I don’t know (I use X11). Changed tty, terminated the session, installed some more packages I needed, rebooted and everything seems to be working fine.
Thank you very much to the team and keep the good work.
Oh, I changed the kernel to 6.6, but 6.9 was working fine
System:
Kernel: 6.6.32-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/vmlinuz-6.6-x86_64
root=/dev/mapper/vgManjaro-lvRoot rw quiet splash udev.log_priority=3
Desktop: KDE Plasma v: 6.0.5 tk: Qt v: N/A info: frameworks v: 6.2.0
wm: kwin_x11 with: krunner vt: 2 dm: SDDM Distro: Manjaro base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: P5P43TD PRO v: Rev X.0x
serial: <superuser required> uuid: <superuser required>
BIOS: American Megatrends v: 0710 date: 11/04/2010
CPU:
Info: model: Intel Core2 Quad Q9650 bits: 64 type: MCP arch: Penryn
level: v1 built: 2008 process: Intel 45nm family: 6 model-id: 0x17 (23)
stepping: 0xA (10) microcode: 0xA0B
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 12 MiB desc: 2x6 MiB
Speed (MHz): avg: 3300 high: 3600 min/max: N/A cores: 1: 3600 2: 2400
3: 3600 4: 3600 bogomips: 28808
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode;
SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; STIBP: disabled; RSB filling;
PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Micro-Star MSI driver: amdgpu v: kernel arch: GCN-4
code: Arctic Islands process: GF 14nm built: 2016-20 pcie: gen: 2
speed: 5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports:
active: HDMI-A-2 off: HDMI-A-1 empty: DP-1,DP-2,DVI-D-1 bus-ID: 01:00.0
chip-ID: 1002:67df class-ID: 0300 temp: 46.0 C
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.0
compositor: kwin_x11 driver: X: loaded: modesetting alternate: fbdev,vesa
dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 506x285mm (19.92x11.22")
s-diag: 581mm (22.86") monitors: <missing: xrandr>
Monitor-1: HDMI-A-1 model: LG (GoldStar) TV serial: <filter> built: 2009
res: 1440x900 dpi: 78 gamma: 1.2 size: 409x230mm (16.1x9.06")
diag: 558mm (22") ratio: 16:10 modes: max: 1440x900 min: 720x400
Monitor-2: HDMI-A-2 model: LG (GoldStar) W2246 serial: <filter>
built: 2010 res: 1920x1080 dpi: 102 gamma: 1.2
size: 477x268mm (18.78x10.55") diag: 547mm (21.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.0.8-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 470 Graphics
(radeonsi polaris10 LLVM 17.0.6 DRM 3.54 6.6.32-1-MANJARO)
device-ID: 1002:67df memory: 3.91 GiB unified: no
API: Vulkan Message: No Vulkan data available.
Audio:
Device-1: Intel 82801JI HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3a3e class-ID: 0403
Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1
chip-ID: 1002:aaf0 class-ID: 0403
API: ALSA v: k6.6.32-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
vendor: ASUSTeK driver: ATL1E v: N/A modules: atl1e pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: dc00 bus-ID: 02:00.0 chip-ID: 1969:1026
class-ID: 0200
IF: enp2s0 state: down mac: <filter>
Device-2: Realtek RTL88x2bu [AC1200 Techkey] driver: rtw_8822bu type: USB
rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 9-1.4:3
chip-ID: 0bda:b812 class-ID: 0000 serial: <filter>
IF: wlp4s0u1u4 state: up mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: ASUSTek ASUS USB-BT500ÿ driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1:2 chip-ID: 0b05:190e
class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Drives:
Local Storage: total: 1.25 TiB used: 12.49 GiB (1.0%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: PNY model: CS900 120GB SSD
size: 111.79 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: SSD serial: <filter> fw-rev: 0613 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: SanDisk model: SD7SB3Q064G1122
size: 59.63 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: SSD serial: <filter> fw-rev: 0000 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 vendor: Zheino model: CHN 25SATA02M 064
size: 59.62 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: SSD serial: <filter> fw-rev: 6K scheme: MBR
ID-4: /dev/sdd maj-min: 8:48 vendor: Hitachi model: HDT721010SLA360
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: A31B scheme: MBR
ID-5: /dev/sde maj-min: 8:64 vendor: Vaseky model: V800 128G
size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: SSD serial: <filter> fw-rev: 7A scheme: GPT
Partition:
ID-1: / raw-size: 78.2 GiB size: 78.19 GiB (100.00%) used: 12.17 GiB (15.6%)
fs: f2fs dev: /dev/dm-14 maj-min: 254:14 mapped: vgManjaro-lvRoot
ID-2: /boot raw-size: 512 MiB size: 487.2 MiB (95.16%)
used: 322.7 MiB (66.2%) fs: ext4 dev: /dev/dm-5 maj-min: 254:5
mapped: vgManjaro-lvBoot
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 209.0 C mobo: 33.0 C gpu: amdgpu temp: 46.0 C
Fan Speeds (rpm): cpu: 892 psu: 1298 case-1: 1973 gpu: amdgpu fan: 1454
Power: 12v: 12.62 5v: N/A 3.3v: 2.93 vbat: N/A gpu: amdgpu watts: 14.00
Info:
Memory: total: 16 GiB available: 15.62 GiB used: 2.07 GiB (13.2%)
Processes: 268 Power: uptime: 17m states: freeze,standby,mem,disk
suspend: deep avail: s2idle,shallow wakeups: 0 hibernate: platform
avail: shutdown, reboot, suspend, test_resume image: 6.23 GiB
services: org_kde_powerdevil, power-profiles-daemon, upowerd Init: systemd
v: 255 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1187 libs: 345 tools: pamac pm: flatpak pkgs: 0
Compilers: N/A Shell: Zsh v: 5.9 default: Bash v: 5.2.26 running-in: konsole
inxi: 3.3.34
1 Like