Lutris wont install Origin

Support Gaming
1

Hi, I tried to install Origin. It worked well when I used the integrated GPU.
But that isn’t good for gaming.
So, I switched to the discret Nvidia GPU.
In this case the install crashes. I can see this messages in the window of the install process:

Started initial process 4921 from /home/molnari/.local/share/lutris/runners/wine/lutris-fshack-6.21-6-x86_64/bin/wine /home/molnari/.cache/lutris/installer/origin/client/OriginSetup.exe /silent
Start monitoring process.
0138:fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0066EBFC 1 C) semi-stub
0138:fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0066E9EC 1 C) semi-stub
0138:fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0066E9FC 1 C) semi-stub
0138:fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0066EC3C 1 C) semi-stub
0138:fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0066EAFC 1 C) semi-stub
0138:fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0066EAAC 1 C) semi-stub
0140:err:kerberos:kerberos_LsaApInitializePackage no Kerberos support, expect problems
0140:fixme:d3d:wined3d_guess_card No card selector available for card vendor 0000 (using GL_RENDERER "llvmpipe (LLVM 13.0.0, 256 bits)").
wine: Unhandled page fault on execute access to 00000000 at address 00000000 (thread 0140), starting debugger...
0148:fixme:imm:ImeSetActiveContext (0xb60030, 1): stub
0148:fixme:imm:ImmReleaseContext (000100C0, 00B60030): stub
0154:fixme:imm:ImeSetActiveContext (0x4403d0, 0): stub
0154:fixme:imm:ImmReleaseContext (0000000000010082, 00000000004403D0): stub

What should fix in my system?

2

It appears it can’t find the driver as it’s falling babck to llvmpipe.

Please post your system info as outlined here:

4

Which post contains the correct format of providing information in that topic?

inxi --admin --verbosity=7 --filter --width
System:
  Kernel: 5.10.89-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
    root=UUID=9a3969dc-0c4f-4c8a-9c7f-4e8cd555f435 rw quiet
    udev.log_priority=3
  Desktop: Cinnamon 5.0.7 tk: GTK 3.24.31 vt: 7 dm: LightDM 1.30.0
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Micro-Star product: GF63 Thin 10SCXR v: REV:1.0
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Micro-Star model: MS-16R4 v: REV:1.0 serial: <superuser required>
    UEFI: American Megatrends v: E16R4IMS.105 date: 04/17/2020
Battery:
  ID-1: BAT1 charge: 47.3 Wh (100.0%) condition: 47.3/51.3 Wh (92.1%)
    volts: 12.7 min: 11.4 model: MSI Corp. MS-16R4 type: Li-ion serial: N/A
    status: Full
Memory:
  RAM: total: 31.18 GiB used: 2.81 GiB (9.0%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i7-10750H bits: 64 type: MT MCP arch: Comet Lake
    family: 6 model-id: 0xA5 (165) stepping: 2 microcode: 0xEA
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
    L3: 12 MiB desc: 1x12 MiB
  Speed (MHz): avg: 800 min/max: 800/5000 scaling: driver: intel_pstate
    governor: powersave cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
    8: 800 9: 800 10: 800 11: 800 12: 800 bogomips: 62431
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt
    cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts
    epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
    ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ibrs_enhanced ida
    intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor
    movbe mpx msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq
    pdcm pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdrand rdseed
    rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3
    stibp syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx
    vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel CometLake-H GT2 [UHD Graphics] vendor: Micro-Star MSI
    driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:9bc4 class-ID: 0300
  Device-2: NVIDIA TU117M vendor: Micro-Star MSI driver: nvidia v: 495.44
    alternate: nouveau,nvidia_drm bus-ID: 01:00.0 chip-ID: 10de:1f99
    class-ID: 0302
  Display: x11 server: X.Org 1.21.1.2 driver: loaded: modesetting,nvidia
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x318mm (20.0x12.5")
    s-diag: 599mm (23.6")
  Monitor-1: HDMI-1-1 res: 1920x1200 hz: 60 dpi: 94
    size: 518x324mm (20.4x12.8") diag: 611mm (24.1")
  OpenGL: renderer: NVIDIA GeForce GTX 1650 with Max-Q Design/PCIe/SSE2
    v: 4.6.0 NVIDIA 495.44 direct render: Yes
Audio:
  Device-1: Intel Comet Lake PCH cAVS vendor: Micro-Star MSI
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci
    bus-ID: 00:1f.3 chip-ID: 8086:06c8 class-ID: 0403
  Device-2: Corsair VOID ELITE USB Gaming Headset type: USB
    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-5:4 chip-ID: 1b1c:0a52
    class-ID: 0300 serial: <filter>
  Sound Server-1: ALSA v: k5.10.89-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.19 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.42 running: no
Network:
  Device-1: Intel Comet Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:06f0 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Micro-Star MSI driver: r8169 v: kernel port: 3000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8
    bus-ID: 1-14:5 chip-ID: 8087:0026 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: disabled
    rfk-block: hardware: no software: no address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.38 TiB used: 165.69 GiB (11.8%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston
    model: RBUSNS8154P3512GJ5 size: 476.94 GiB block-size: physical: 512 B
    logical: 512 B speed: 15.8 Gb/s lanes: 2 type: SSD serial: <filter>
    rev: E8FK12.D temp: 40.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM048-2E7172
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    type: HDD rpm: 5400 serial: <filter> rev: 0001 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 238.42 GiB size: 233.68 GiB (98.01%)
    used: 37.93 GiB (16.2%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: 9a3969dc-0c4f-4c8a-9c7f-4e8cd555f435
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 312 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: FF3C-41DF
  ID-3: /mnt/misc_disk raw-size: 684 GiB size: 672.26 GiB (98.28%)
    used: 127.76 GiB (19.0%) fs: ext4 dev: /dev/sda4 maj-min: 8:4 label: misc
    uuid: f417ae0c-6b9f-45d7-affb-827b6ad26286
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/sda3 maj-min: 8:3 label: N/A
    uuid: 42569afe-0e3a-49ef-9c01-93d866fdac4a
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 300 MiB fs: vfat label: N/A
    uuid: D5C5-9B1E
  ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 467.84 GiB fs: ext4 label: N/A
    uuid: 60356ee5-c51e-460f-bb14-cb1ef46c6b36
  ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 8.8 GiB fs: swap label: N/A
    uuid: de013c32-62fb-47e9-a4a6-2374f3b01231
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-3:2 info: Logitech M105 Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
    power: 100mA chip-ID: 046d:c077 class-ID: 0301
  Device-2: 1-4:3 info: Logitech Keyboard K120 type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s
    power: 90mA chip-ID: 046d:c31c class-ID: 0300
  Device-3: 1-5:4 info: Corsair VOID ELITE USB Gaming Headset
    type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4
    rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1b1c:0a52 class-ID: 0300
    serial: <filter>
  Device-4: 1-14:5 info: Intel AX201 Bluetooth type: Bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0026
    class-ID: e001
  Hub-2: 2-0:1 info: Super-speed hub ports: 8 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 43.0 C pch: 48.0 C mobo: N/A gpu: nvidia
    temp: 42 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 307 Uptime: 56m wakeups: 1 Init: systemd v: 250 tool: systemctl
  Compilers: gcc: 11.1.0 clang: 13.0.0 Packages: 1352 pacman: 1345 lib: 478
  flatpak: 0 snap: 7 Shell: Bash v: 5.1.12 running-in: gnome-terminal
  inxi: 3.3.12
5

By doing what? Do you have the option to use discrete graphics enabled in Lutris Preferences under Global Options?

6

I am using the optimus-manager utility to switching between integrated and nvidia gpus.
The Lutris Preferences has no option, there is only one the: Off.

7

The Use discrete graphics option is a toggle. It will be grayed out if it’s not available. It sounds like you’re looking at the Optimus Launcher option.

8

You are right.
By the way, the discrete graphics option toggle is On state.

9

Do you have more advise in this subject?

10

The next release of Lutris will include by default support for origin and Ubisoft connect.
Sorry not to help a lot (my knowledge of this is very limited) but maybe in the next version this gets fixed for you?
Hope you find a proper solution in the mean time anyway, just thought you’d like to know.

11

Thanks for the info. That next release could help me.

12

Good news! A lesser miracle happened.
I installed on another drive a completely new system from the scratch.
I was able install Lutris and inside that the Origin.
One strange thing. I can’t see any vulkan related things in the Lutris/Preferences/Global Options.
It would be nice to know, what is in the background. Maybe I could improve something or make better.

13

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.