Login/desktop moved from tty1 to tty2 after update

I was previously on stable but after waiting 12hrs I did the update after making sure my mirrors were synced, it kinda worked except for a few things that are still being ironed out, like the pamac thing.

Since I do have a very few pakages from AUR I opted to also do the change to unstable after the doing the update on stable, even though I never really had any problems with conflicts in stable, only non system things installed (except for arguably goverlay and proton-GE)

pamac list -i | grep AUR                                                                                                                                                                             ✔ 
cura-bin                           5.4.0-1                         AUR       662,6 MB
edid-decode-git                    r654.a31e680-1                  AUR       402,4 kB
goverlay                           0.9.1-1                         AUR       6,6 MB
hw-probe                           1.6.5-1                         AUR       542,5 kB
proton-ge-custom-bin               1:GE_Proton8_6-1                AUR       1,3 GB
rar                                6.22.0-1                        AUR       1,2 MB
spotify                            1:                  AUR       274,0 MB
usbimager                          1.0.9-1                         AUR       523,1 kB
vlc-pause-click-plugin             2.2.0-1                         AUR       18,2 kB
vmware-keymaps                     1.0-3                           AUR       59,4 kB
vmware-workstation                 17.0.2-1                        AUR       920,1 MB

I got a few new pakages upgraded but the same small issues as in stable is still there.

A few things I notice.

  • Community is still there when doing a sudo pacman -Syu, seems empty but still there. sudo pacman -Sc did not remove community.
  • Mangohud is reported newer installed than available, I leave it be rather than downgrading with -Syuu until recommended otherwise. Maybe goverlay uses a new version, but I haven’t updated that for months.
  • Wine seems to have issues (had on stable too), have not looked into it very much.
  • My login and desktop tty has changed from always being on tty1 before to now tty2. My tty1 is stuck on my boot chatter (I have disabled spash and quiet).

Why is this change made, I have seen someone mentioning this behavior in other threads, but nothing in the update threads or anything, maybe it’s a KDE thing?

      2 1000 bedna seat0 tty2

1 sessions listed.
  Kernel: 6.3.12-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.3-x86_64
    root=UUID=700d034d-b99a-482b-880b-9060acf3a6b3 rw rootflags=subvol=@
    nvidia_drm.modeset=1 resume=UUID=5ae8fbf5-a704-41ea-be6d-bf26b38325ed
  Desktop: KDE Plasma v: 5.27.6 tk: Qt v: 5.15.10 wm: kwin_x11 vt: 2 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
  Type: Desktop System: Gigabyte product: X670 AORUS ELITE AX v: -CF
    serial: <superuser required>
  Mobo: Gigabyte model: X670 AORUS ELITE AX v: x.x
    serial: <superuser required> UEFI: American Megatrends LLC. v: F10a
    date: 06/07/2023
  Info: model: AMD Ryzen 9 7900X bits: 64 type: MT MCP arch: Zen 4 gen: 5
    level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
    model-id: 0x61 (97) stepping: 2 microcode: 0xA601203
  Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
    L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 12 MiB desc: 12x1024 KiB
    L3: 64 MiB desc: 2x32 MiB
  Speed (MHz): avg: 3172 high: 5340 min/max: 3000/5733 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 4700 2: 3000
    3: 3000 4: 3000 5: 3000 6: 3000 7: 3000 8: 5340 9: 2704 10: 3000 11: 2672
    12: 3000 13: 3592 14: 2949 15: 3000 16: 3000 17: 2874 18: 3000 19: 3000
    20: 3000 21: 3000 22: 3000 23: 2703 24: 3614 bogomips: 225240
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional,
    RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
  Device-1: NVIDIA GA102 [GeForce RTX 3090] vendor: eVga.com. driver: nvidia
    v: 535.54.03 alternate: nouveau,nvidia_drm non-free: 535.xx+
    status: current (as of 2023-07) arch: Ampere code: GAxxx
    process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16
    ports: active: none off: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 01:00.0
    chip-ID: 10de:2204 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.2
    compositor: kwin_x11 driver: X: loaded: nvidia gpu: nvidia,nvidia-nvswitch
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 81 s-size: 602x343mm (23.70x13.50")
    s-diag: 693mm (27.28")
  Monitor-1: HDMI-A-1 mapped: HDMI-0 note: disabled model: Asus VX279
    serial: <filter> built: 2015 res: 1920x1080 hz: 60 dpi: 79 gamma: 1.2
    size: 621x341mm (24.45x13.43") diag: 690mm (27.2") ratio: 16:9 modes:
    max: 1920x1080 min: 640x480
  API: OpenGL v: 4.6.0 NVIDIA 535.54.03 renderer: NVIDIA GeForce RTX
    3090/PCIe/SSE2 direct-render: Yes
  Device-1: NVIDIA GA102 High Definition Audio vendor: eVga.com.
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 01:00.1 chip-ID: 10de:1aef class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 15:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.3.12-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 0.3.73 status: off with: wireplumber status: active
    tools: pw-cli,wpctl
  Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
    type: plugin tools: pacat,pactl
  Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 0e:00.0
    chip-ID: 10ec:8125 class-ID: 0200
  IF: enp14s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter
    driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 0f:00.0
    chip-ID: 14c3:0616 class-ID: 0280
  IF: wlp15s0 state: down mac: <filter>
  Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:5 chip-ID: 0e8d:0616
    class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
  Local Storage: total: 4.09 TiB used: 1.5 TiB (36.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 5B2QGXA7 temp: 47.9 C
    scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 500GB
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Western Digital
    model: WD30EFRX-68EUZN0 size: 2.73 TiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
    fw-rev: 0A80 scheme: GPT
  ID-1: / raw-size: 122 GiB size: 122 GiB (100.00%) used: 69.13 GiB (56.7%)
    fs: btrfs dev: /dev/sda7 maj-min: 8:7
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
    used: 292 KiB (0.1%) fs: vfat dev: /dev/sda5 maj-min: 8:5
  ID-3: /home raw-size: 104.53 GiB size: 104.53 GiB (100.00%)
    used: 36.75 GiB (35.2%) fs: btrfs dev: /dev/sda8 maj-min: 8:8
  ID-4: /var/log raw-size: 122 GiB size: 122 GiB (100.00%)
    used: 69.13 GiB (56.7%) fs: btrfs dev: /dev/sda7 maj-min: 8:7
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 38 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/sda6 maj-min: 8:6
  System Temperatures: cpu: 59.1 C mobo: N/A gpu: nvidia temp: 49 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
  Processes: 462 Uptime: 3h 31m wakeups: 0 Memory: total: 32 GiB note: est.
  available: 31.09 GiB used: 5.39 GiB (17.3%) Init: systemd v: 253
  default: graphical tool: systemctl Compilers: gcc: 13.1.1 clang: 15.0.7
  Packages: pm: pacman pkgs: 1511 libs: 417 tools: pamac,yay pm: flatpak
  pkgs: 0 Shell: Zsh v: 5.9 default: Bash v: 5.1.16 running-in: yakuake
  inxi: 3.3.28

This screws up my way of waking my computer with wake-on-lan from outside (over internet) and then connecting to it with vlc. I can probably make changes, but then I HAVE TO KNOW if this is a bug or a feature (will it continue to be like this? I need to know what tty my login/desktop will be at)

Yes, I can confirm that.
Desktop: KDE

I did report it on the update thread, and it was not a deliberate change. It’s a bug — presumably in the systemd configuration — which we’ve had once before as well.

I missed that, sorry.

I guess I wait a while and see what happens.
Thank you for responding! :hearts:

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.