Laptop wakes up automatically in suspended state when charges

[speedo-spin]

Hello.
My laptop wakes up from suspended state if I keep power cable plugged-in after 15-40 min, it’s different every time. If I plug-off the power cable, it won’t wake up and after several hours eventually will shutdown.
Any ideas how to fix it? Do you need some hardware info?
Thanks

update: info from inxi

System:
  Kernel: 6.6.10-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
    root=UUID=195bac60-114b-4799-9a62-2277a13dc0f4 rw quiet
    cryptdevice=UUID=29976e95-b601-46ce-ad7e-4ff37cfeadc7:luks-29976e95-b601-46ce-ad7e-4ff37cfeadc7
    root=/dev/mapper/luks-29976e95-b601-46ce-ad7e-4ff37cfeadc7
    udev.log_priority=3
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
    v: 4.18.0 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP ProBook 455 G8 Notebook PC v: N/A
    serial: <filter> Chassis: type: 10 serial: <filter>
  Mobo: HP model: 8864 v: KBC Version 41.2C.00 serial: <filter> UEFI: HP
    v: T78 Ver. 01.14.00 date: 06/21/2023
Battery:
  ID-1: BAT0 charge: 34.7 Wh (96.4%) condition: 36.0/45.0 Wh (80.0%)
    volts: 12.4 min: 11.4 model: Hewlett-Packard Primary type: Li-ion
    serial: <filter> status: not charging cycles: 128
  Device-1: hidpp_battery_0 model: Logitech Anywhere MX serial: <filter>
    charge: 10% rechargeable: yes status: discharging
Memory:
  System RAM: total: 32 GiB available: 30.67 GiB used: 4.52 GiB (14.8%)
  Array-1: capacity: 32 GiB slots: 2 modules: 2 EC: None
    max-module-size: 16 GiB note: est.
  Device-1: Bottom-Slot 1(left) type: DDR4 detail: synchronous unbuffered
    (unregistered) size: 16 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2
    max: 1.2 width (bits): data: 64 total: 64 manufacturer: Samsung
    part-no: M471A2K43DB1-CWE serial: <filter>
  Device-2: Bottom-Slot 2(right) type: DDR4 detail: synchronous unbuffered
    (unregistered) size: 16 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2
    max: 1.2 width (bits): data: 64 total: 64 manufacturer: Samsung
    part-no: M471A2K43DB1-CWE serial: <filter>
CPU:
  Info: model: AMD Ryzen 7 5800U with Radeon Graphics socket: FP6 bits: 64
    type: MT MCP arch: Zen 3 gen: 4 level: v3 note: check built: 2021-22
    process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
    microcode: 0xA50000D
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB
    desc: 1x16 MiB
  Speed (MHz): avg: 1139 high: 2812 min/max: 400/4507 base/boost: 1900/4450
    scaling: driver: amd-pstate-epp governor: powersave volts: 1.2 V
    ext-clock: 100 MHz cores: 1: 1924 2: 400 3: 400 4: 2411 5: 400 6: 400
    7: 1508 8: 2812 9: 400 10: 400 11: 400 12: 2266 13: 2277 14: 400 15: 1430
    16: 400 bogomips: 60718
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de debug_swap decodeassists erms extapic
    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
    svm svm_lock syscall tce topoext tsc tsc_scale umip user_shstk v_spec_ctrl
    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
    xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Vulnerable: Safe RET, no microcode
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Cezanne [Radeon Vega Series / Radeon Mobile Series]
    vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5 code: Vega
    process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1
    empty: DP-1,DP-2,HDMI-A-1 bus-ID: 05:00.0 chip-ID: 1002:1638 class-ID: 0300
    temp: 38.0 C
  Device-2: Luxvisions Innotech HP HD Camera driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-4:3 chip-ID: 30c9:0010
    class-ID: 0e02
  Display: x11 server: X.Org v: 21.1.10 compositor: xfwm v: 4.18.0 driver: X:
    loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: eDP-1 mapped: eDP model: AU Optronics 0xc48a built: 2019
    res: 1920x1080 hz: 60 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
    diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
    inactive: gbm,wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.3.3-manjaro1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi renoir
    LLVM 16.0.6 DRM 3.54 6.6.10-1-MANJARO) device-ID: 1002:1638 memory: 500 MiB
    unified: no
  API: Vulkan v: 1.3.274 layers: N/A device: 0 type: integrated-gpu name: AMD
    Radeon Graphics (RADV RENOIR) driver: mesa radv v: 23.3.3-manjaro1.1
    device-ID: 1002:1638 surfaces: xcb,xlib
Audio:
  Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
    speed: 16 GT/s bus-ID: 05:00.1 chip-ID: 1002:1637 class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
    driver: N/A alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x,
    snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
    snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh pcie: gen: 3
    speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.5
    chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.6 chip-ID: 1022:15e3
    class-ID: 0403
  API: ALSA v: k6.6.10-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.0.0 status: off tools: pw-cli
  Server-3: PulseAudio v: 16.1 status: active (root, process) with:
    1: pulseaudio-alsa type: plugin 2: pulseaudio-jack type: module
    tools: pacat,pactl,pavucontrol
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: 3000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp1s0 state: down mac: <filter>
  Device-2: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
    vendor: Hewlett-Packard driver: rtw_8822ce v: N/A modules: rtw88_8822ce pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.0
    chip-ID: 10ec:c822 class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-3:2 chip-ID: 0bda:b00c
    class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
  Device-1: luks-29976e95-b601-46ce-ad7e-4ff37cfeadc7 maj-min: 254:0
    type: LUKS dm: dm-0 size: 200 GiB
  Components:
  p-1: nvme0n1p4 maj-min: 259:4 size: 200 GiB
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 476.94 GiB used: 81.52 GiB (17.1%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLQ512HALU-000H1
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: HPS4NFXV temp: 32.9 C
    scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 200 GiB size: 195.8 GiB (97.90%) used: 81.46 GiB (41.6%)
    fs: ext4 block-size: 4096 B dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-29976e95-b601-46ce-ad7e-4ff37cfeadc7 label: N/A
    uuid: 195bac60-114b-4799-9a62-2277a13dc0f4
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 64.5 MiB (67.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: N/A uuid: 5C61-D941
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: N/A label: N/A uuid: N/A
  ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 276.33 GiB fs: ntfs label: N/A
    uuid: 2684F02484EFF3E9
  ID-3: /dev/nvme0n1p5 maj-min: 259:5 size: 509 MiB fs: ntfs label: N/A
    uuid: D83808AA38088A28
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-3:2 info: Realtek Bluetooth Radio type: bluetooth driver: btusb
    interfaces: 2 rev: 1.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 500mA chip-ID: 0bda:b00c class-ID: e001 serial: <filter>
  Device-2: 1-4:3 info: Elan Micro ELAN:ARM-M4 type: <vendor specific>
    driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 100mA chip-ID: 04f3:0c5e class-ID: 0000
  Hub-2: 2-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-2:2 info: Logitech Unifying Receiver type: keyboard,mouse,HID
    driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
    chip-ID: 046d:c52b class-ID: 0300
  Device-2: 3-4:3 info: Luxvisions Innotech HP HD Camera type: video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 500mA chip-ID: 30c9:0010 class-ID: 0e02
  Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 48.8 C mobo: N/A gpu: amdgpu temp: 41.0 C
  Fan Speeds (rpm): N/A
Info:
  Processes: 443 Uptime: 3m wakeups: 0 Init: systemd v: 255 default: graphical
  tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6 Packages: pm: pacman
  pkgs: 1205 libs: 364 tools: pamac,yay Shell: Sudo (sudo) v: 1.9.15p5
  default: Bash v: 5.2.21 running-in: tilda inxi: 3.3.31

[johns276]

Hardware info would be appreciated, so will the DE you use and the current running kernel.

[andreas85]

Welcome to Manjaro!

1. Please read the information behind this link. It will help you to post necessary information.

[HowTo] Request support

Difficulty: ★☆☆☆☆ Strong of its many members, the Manjaro support forum can provide you help whenever you have an issue with your Manjaro installation. But in order to work efficiently, we shall also ask you to follow three major points. Provide context Simply signaling an issue is rarely enough to understand how it occurred. It is thus important to provide details on how it happened: Detail prior actions leading to the issue. List solutions and guides you already tried, with links when…

2. Please press the three dots … below your post and then press the

• If you give us information about your system, we can see what we’re talking about and make better suggestions.
• You can do this by using inxi in a terminal or in console.

sudo inxi --admin --verbosity=7 --filter --no-host --width

• Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
• Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.

3. Copy the output from inxi (including the command) and paste it into your post.

• To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

[HowTo] Post command output and file content as formatted text

Difficulty: ★☆☆☆☆ Formatting differences Discourse – this forum’s engine – uses Markdown to format its posts, and removes “unnecessary” whitespace. Terminal commands often produce output formatted so that they are better readable by the user, taking advantage of the monospaced font used. Programming code often rely on indentation to make it more readable. Using preformatting in Markdown Markdown includes a pattern to provide preformatting when necessary. You only need to put the part to f…

Have you already for your problem in the forum ? (Wisdom lies in asking → listening → reading )

[speedo-spin]

post is updated with info from inxi

[speedo-spin]

@johns276 @andreas85 guys, is there any command I can run to check what was the trigger of wake up ? How can I debug it?
I’m pretty sure it’s related somehow to power management, maybe when battery is charged up to 100% or smth. It never wakes up if I plug the power cable off (laptop)

[andreas85]

@speedo-spin

I’m pretty sure it’s related somehow to power management, maybe when battery is charged up to 100% or smth

That could really be the trigger.

What really happens should be recorded in the log files. So you would have to look through the log files after such an incident. It should say what caused it to wake.

However, I have to admit that log files and power management are not my area of expertise. I only requested the inxi because no one here in the forum can do anything without this information.