Kjots lost all my notes

Kjots lost all my notes, I suspect a problem with akonadi similar to last time:

org.kde.pim.akonadicore: "QLocalSocket: Remote closed" "/run/user/1000/akonadi/akonadiserver-cmd.socket"
org.kde.pim.akonadicore: Socket error occurred: "QLocalSocket: Remote closed"
org.kde.pim.akonadicore: Job error:  "Cannot connect to the Akonadi service." for collection: QVector()

Any suggestions?

Maybe begin with system information, as we dont know anything.
(and/or if we are to go by your profile then your system is in an unsupported state, using EOL kernel, etc)

inxi -Farz

Kernel: 6.8.9-3-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.8-x86_64
root=UUID=e276dad2-7983-44e7-a105-322feb3f86d3 rw quiet
udev.log_priority=3 set amd_iommu=on iommu=pt
Desktop: KDE Plasma v: 6.0.4 tk: Qt v: N/A info: frameworks v: 6.1.0
wm: kwin_x11 with: krunner vt: 2 dm: SDDM Distro: Manjaro base: Arch Linux
Type: Desktop System: Micro-Star product: MS-7C35 v: 2.0
Mobo: Micro-Star model: MEG X570 UNIFY (MS-7C35) v: 2.0
serial: uuid: UEFI: American
Megatrends LLC. v: A.J0 date: 03/29/2024
ID-1: hidpp_battery_10 charge: 55% condition: N/A volts: 3.8 min: N/A
model: Logitech G Pro Wireless Gaming Mouse type: N/A serial:
status: discharging
Info: model: AMD Ryzen 5 5600X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 0 microcode: 0xA20102B
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 2235 high: 2631 min/max: 2200/4650 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2199 2: 2200
3: 2200 4: 2631 5: 2202 6: 2200 7: 2200 8: 2198 9: 2200 10: 2200 11: 2200
12: 2200 bogomips: 88844
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow mitigation: Safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;
STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected

Device-1: NVIDIA TU117GL [T600] driver: vfio-pci v: N/A alternate: nouveau
non-free: 550.xx+ status: current (as of 2024-04; EOL~2026-12-xx)
arch: Turing code: TUxxx process: TSMC 12nm FF built: 2018-2022 pcie:
gen: 1 speed: 2.5 GT/s lanes: 4 link-max: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 24:00.0 chip-ID: 10de:1fb1 class-ID: 0300
Device-2: AMD Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] driver: amdgpu
v: kernel arch: RDNA-3 code: Navi-3x process: TSMC n5 (5nm) built: 2022+
pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: HDMI-A-1 empty: DP-1,
DP-2, DP-3, Writeback-1 bus-ID: 2f:00.0 chip-ID: 1002:744c class-ID: 0300
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 23.2.6
compositor: kwin_x11 driver: X: loaded: amdgpu dri: radeonsi gpu: amdgpu
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.00x22.48")
s-diag: 1165mm (45.88")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: Samsung serial:
built: 2018 res: 3840x2160 hz: 60 dpi: 52 gamma: 1.2
size: 1872x1053mm (73.7x41.46") diag: 1388mm (54.6") ratio: 16:9 modes:
max: 3840x2160 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.0.6-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 7900 XT (radeonsi
navi31 LLVM 17.0.6 DRM 3.57 6.8.9-3-MANJARO) device-ID: 1002:744c
memory: 19.53 GiB unified: no
API: Vulkan v: 1.3.279 layers: 12 device: 0 type: discrete-gpu name: AMD
Radeon RX 7900 XT (RADV NAVI31) driver: mesa radv v: 24.0.6-manjaro1.1
device-ID: 1002:744c surfaces: xcb,xlib
Device-1: NVIDIA driver: vfio-pci alternate: snd_hda_intel pcie:
speed: Unknown lanes: 63 link-max: gen: 6 speed: 64 GT/s bus-ID: 24:00.1
chip-ID: 10de:10fa class-ID: 0403
Device-2: AMD Navi 31 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 2f:00.1 chip-ID: 1002:ab30
class-ID: 0403
Device-3: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 31:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-4: Corsair VIRTUOSO Wireless Gaming Headset
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 7-3:7 chip-ID: 1b1c:0a42 class-ID: 0300
API: ALSA v: k6.8.9-3-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse
status: active 2: pipewire-media-session status: active 3: pipewire-alsa
type: plugin tools: pactl,pw-cat,pw-cli
Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: d000 bus-ID: 27:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp39s0 state: up speed: 1000 Mbps duplex: full mac:
IF-ID-1: virbr0 state: down mac:
Info: services: NetworkManager, smbd, systemd-timesyncd
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-4:2 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: bt-v: 5.2 lmp-v: 11
status: discoverable: no pairing: no
Local Storage: total: 4.55 TiB used: 1.81 TiB (39.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 990 PRO 4TB
size: 3.64 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: fw-rev: 4B2QJXD7 temp: 50.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: fw-rev: 2B6Q scheme: MBR
ID-1: / raw-size: 92.64 GiB size: 90.63 GiB (97.83%) used: 49.16 GiB (54.2%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%)
used: 280 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 838.38 GiB size: 824.65 GiB (98.36%)
used: 564.98 GiB (68.5%) fs: ext4 dev: /dev/sda4 maj-min: 8:4
Alert: No swap data was found.
System Temperatures: cpu: 37.0 C mobo: 35.0 C gpu: amdgpu temp: 47.0 C
mem: 52.0 C
Fan Speeds (rpm): fan-1: 1569 fan-2: 1348 fan-3: 0 fan-4: 0 fan-5: 0
fan-6: 0 fan-7: 0 gpu: amdgpu fan: 487
Packages: 2126 pm: pacman pkgs: 2114 libs: 547 tools: pamac,yay pm: flatpak
pkgs: 12
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.easyname.at/manjaro/stable/$repo/$arch
2: https://mirror.alwyzon.net/manjaro/stable/$repo/$arch
Memory: total: 32 GiB available: 31.26 GiB used: 7.52 GiB (24.0%)
Processes: 351 Power: uptime: 12h 52m states: freeze,mem,disk
suspend: deep avail: s2idle wakeups: 0 hibernate: platform avail: shutdown,
reboot, suspend, test_resume image: 12.5 GiB
services: org_kde_powerdevil,upowerd Init: systemd v: 255
default: graphical tool: systemctl
Compilers: clang: 17.0.6 gcc: 13.2.1 Shell: Zsh v: 5.9 default: Bash
v: 5.2.26 running-in: konsole inxi: 3.3.34

While trying to start akonadi I get the following output:

akonadictl start

Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8.
Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead.
If this causes problems, reconfigure your locale. See the locale(1) manual
for more information.
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
D-Bus session bus is not available!
Aborted (core dumped)

Is the “D-Bus session bus” the problem?

Ok I figured it out… The Kjots is not jet updated to latest 6.0.0 that is compatible with KDE6 therefore it cannot work.

This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed.