Kernel 7.2.0rc5-1 fails to reboot on my system - Minisforum UM-690

byron4120 · 30 July 2026 22:14

Restart using 7.2.0rc5-1 goes into an infinite wait or just beyond my patience. My system is

Operating System: Manjaro Linux 
KDE Plasma Version: 6.7.3
KDE Frameworks Version: 6.28.0
Qt Version: 6.11.1
Kernel Version: 7.1.5-2-MANJARO (64-bit)
Graphics Platform: WaylandProcessors: 16 × AMD Ryzen 9 6900HX with Radeon Graphics
Memory: 32 GiB of RAM (30.6 GiB usable)
Graphics Processor: AMD Radeon 680M
Manufacturer: Micro Computer (HK) Tech LimitedProduct
Name: Venus seriesSystem
Version: Version 1.0

BTW 7.1.5 works fine - Uninstalled 7.2 rebooted - reinstalled 7.2 – same results.

Inxi –zv8 results follow

Kernel: 7.2.0-rc5-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 16.1.1 
    clocksource: tsc avail: hpet,acpi_pm 
    parameters: BOOT_IMAGE=/boot/vmlinuz-7.2-x86_64 
    root=UUID=ea8f9b67-04f2-49c7-9d41-98f8382419e1 rw quiet splash 
    udev.log_priority=3 
  Desktop: KDE Plasma v: 6.7.3 tk: Qt v: N/A wm: kwin_wayland dm: N/A 
    Distro: Manjaro base: Arch Linux 
Machine: 
  Type: Desktop System: Micro (HK) Tech product: Venus series v: Version 1.0 
    serial: N/A 
  Mobo: Shenzhen Meigao Equipment model: F7BFC v: Version 1.0 serial: N/A 
    part-nu: Default SKU uuid: 6d92bd56-8bf3-11ed-ab78-9706745a3c00 
    Firmware: UEFI vendor: American Megatrends LLC. v: 1.20 date: 03/06/2024 
Battery: 
  Message: No system battery data found. Is one present? 
Memory: 
  System RAM: total: 32 GiB available: 30.58 GiB used: 2.95 GiB (9.6%) 
  Array-1: capacity: 64 GiB slots: 2 modules: 2 EC: None 
    max-module-size: 32 GiB note: est. 
  Device-1: Channel-A DIMM 0 type: DDR5 detail: synchronous unbuffered 
    (unregistered) size: 16 GiB speed: 4800 MT/s volts: curr: 1.1 min: 1.1 
    max: 1.1 width (bits): data: 64 total: 64 manufacturer: A-DATA Technology 
    part-no: N/A serial: <filter> 
  Device-2: Channel-B DIMM 0 type: DDR5 detail: synchronous unbuffered 
    (unregistered) size: 16 GiB speed: 4800 MT/s volts: curr: 1.1 min: 1.1 
    max: 1.1 width (bits): data: 64 total: 64 manufacturer: A-DATA Technology 
    part-no: N/A serial: <filter> 
PCI Slots: 
  Slot: 1 type: PCIe status: available info: J3604 length: short volts: 3.3 
    bus-ID: 0200:00:01.1 
  Slot: 3 type: N/A status: in use info: M.2, J3711 length: short volts: 3.3 
    bus-ID: 00:01.2 children: 1: 01:00.0 class-ID: 0c03 type: serialbus 
  Slot: 5 type: N/A status: in use info: M.2, J3704 length: short volts: 3.3 
    bus-ID: 00:02.4 children: 1: 04:00.0 class-ID: 0108 type: mass-storage 
  Slot: 6 type: N/A status: in use info: M.2, J3709 length: short volts: 3.3 
    bus-ID: 00:02.2 children: 1: 03:00.0 class-ID: 0280 type: network 
CPU: 
  Info: model: AMD Ryzen 9 6900HX with Radeon Graphics socket: FP7r2 bits: 64 
    type: MT MCP arch: Zen 3+ gen: 3 level: v3 note: check built: 2022 
    process: TSMC n6 (7nm) family: 0x19 (25) model-id: 0x44 (68) stepping: 1 
    microcode: 0xA404108 
  Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2 
    smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB 
    desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB 
  Speed (MHz): avg: 1100 min/max: 416/4937 boost: enabled 
    base/boost: 3300/4925 scaling: driver: amd-pstate-epp governor: powersave 
    volts: 1.2 V ext-clock: 100 MHz cores: 1: 1100 2: 1100 3: 1100 4: 1100 
    5: 1100 6: 1100 7: 1100 8: 1100 9: 1100 10: 1100 11: 1100 12: 1100 
    13: 1100 14: 1100 15: 1100 16: 1100 bogomips: 105407 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
    constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total 
    cqm_occup_llc cr8_legacy cx16 cx8 de debug_swap decodeassists erms 
    extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt 
    ht hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce 
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt 
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq 
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni 
    popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep 
    sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 
    stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip 
    user_shstk v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall 
    vpclmulqdq wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt 
    xsaves xtopology 
  Vulnerabilities: 
  Type: gather_data_sampling status: Not affected 
  Type: ghostwrite status: Not affected 
  Type: indirect_target_selection status: Not affected 
  Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: mmio_stale_data status: Not affected 
  Type: old_microcode status: Not affected 
  Type: reg_file_data_sampling status: Not affected 
  Type: retbleed status: Not affected 
  Type: spec_rstack_overflow mitigation: Safe RET 
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via 
    prctl 
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and \__user pointer 
    sanitization 
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; 
    STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not 
    affected 
  Type: srbds status: Not affected 
  Type: tsa mitigation: Clear CPU buffers 
  Type: tsx_async_abort status: Not affected 
  Type: vmscape mitigation: IBPB before exit to userspace 
Graphics: 
  Device-1: Advanced Micro Devices \[AMD/ATI\] Rembrandt \[Radeon 680M\] 
    driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) 
    built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: 
    active: HDMI-A-2 empty: DP-1, DP-2, DP-3, DP-4, DP-5, HDMI-A-1, 
    Writeback-1 bus-ID: 35:00.0 chip-ID: 1002:1681 class-ID: 0300 temp: 48.0 C 
  Device-2: Image+ NewEye 62 driver: snd-usb-audio,uvcvideo type: USB 
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-1.2:5 
    chip-ID: 2757:3032 class-ID: 0102 serial: <filter> 
  Display: unspecified server: X.Org v: 24.1.13 with: Xwayland v: 24.1.13 
    compositor: kwin_wayland driver: X: loaded: amdgpu unloaded: modesetting 
    alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1 
  Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.00x22.48") 
    s-diag: 1165mm (45.88") monitors: <missing: xrandr> 
  Monitor-1: HDMI-A-2 model: LG (GoldStar) HDR 4K serial: <filter> 
    built: 2022 res: 3840x2160 dpi: 163 gamma: 1.2 chroma: red: x: 0.682 
    y: 0.314 green: x: 0.278 y: 0.675 blue: x: 0.153 y: 0.047 white: x: 0.314 
    y: 0.329 size: 600x340mm (23.62x13.39") diag: 690mm (27.2") ratio: 16:9 
    modes: 3840x2160, 2560x1440, 1920x1080, 1600x900, 1280x1024, 1280x800, 
    1152x864, 1280x720, 1024x768, 800x600, 720x576, 720x480, 640x480 
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid: 
    unhandled CEA mode 96 3: parse_edid: unhandled CEA mode 93 4: parse_edid: 
    unhandled CEA mode 94 5: parse_edid: unhandled CEA mode 95 
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi 
    device: 1 drv: swrast gbm: drv: radeonsi surfaceless: drv: radeonsi x11: 
    drv: radeonsi inactive: wayland 
  API: OpenGL v: 4.6 vendor: amd mesa v: 26.1.5-arch1.1 glx-v: 1.4 
    direct-render: yes renderer: AMD Radeon 680M (radeonsi rembrandt ACO DRM 
    3.64 7.2.0-rc5-1-MANJARO) device-ID: 1002:1681 memory: 500 MiB 
    unified: yes 
  API: Vulkan v: 1.4.350 layers: 2 device: 0 type: integrated-gpu name: AMD 
    Radeon 680M (RADV REMBRANDT) driver: mesa radv v: 26.1.5-arch1.1 
    device-ID: 1002:1681 surfaces: N/A 
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo 
    de: kscreen-console,kscreen-doctor wl: wayland-info x11: xdpyinfo,xprop 
Audio: 
  Device-1: Advanced Micro Devices \[AMD/ATI\] Radeon High Definition Audio 
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 
    bus-ID: 35:00.1 chip-ID: 1002:1640 class-ID: 0403 
  Device-2: Advanced Micro Devices \[AMD\] Audio Coprocessor 
    driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x, 
    snd_pci_acp5x, snd_acp_pci, snd_pci_ps, snd_sof_amd_renoir, 
    snd_sof_amd_rembrandt, snd_sof_amd_vangogh, snd_sof_amd_acp63, 
    snd_sof_amd_acp70 pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 35:00.5 
    chip-ID: 1022:15e2 class-ID: 0480 
  Device-3: Advanced Micro Devices \[AMD\] Ryzen HD Audio vendor: Realtek 
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 
    bus-ID: 35:00.6 chip-ID: 1022:15e3 class-ID: 0403 
  Device-4: Image+ NewEye 62 driver: snd-usb-audio,uvcvideo type: USB 
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-1.2:5 
    chip-ID: 2757:3032 class-ID: 0102 serial: <filter> 
  API: ALSA v: k7.2.0-rc5-1-MANJARO status: kernel-api with: aoss 
    type: oss-emulator tools: alsactl,alsamixer,amixer 
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl 
  Server-2: JACK v: 1.9.22 status: off tools: N/A 
  Server-3: PipeWire v: 1.6.8 status: n/a (root, process) with: 
    1: pipewire-pulse status: active 2: wireplumber status: active 
    3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl 
Network: 
  Device-1: Intel Ethernet I225-V driver: igc v: kernel pcie: gen: 2 
    speed: 5 GT/s lanes: 1 port: N/A bus-ID: 02:00.0 chip-ID: 8086:15f3 
    class-ID: 0200 
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
    broadcast: <filter> 
  IP v6: <filter> type: dynamic noprefixroute scope: global 
  IP v6: <filter> type: noprefixroute scope: link 
  Device-2: MEDIATEK MT7921K Wi-Fi 6E 80MHz driver: mt7921e v: kernel pcie: 
    gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14c3:0608 
    class-ID: 0280 
  IF: wlp3s0 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
    broadcast: <filter> 
  IP v6: <filter> type: dynamic noprefixroute scope: global 
  IP v6: <filter> type: noprefixroute scope: link 
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant 
  WAN IP: <filter> 
Bluetooth: 
  Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1 
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-3:3 chip-ID: 0e8d:0608 
    class-ID: e001 serial: <filter> 
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends 
Logical: 
  Message: No logical block device data found. 
RAID: 
  Message: No RAID data found. 
Drives: 
  Local Storage: total: 10.03 TiB used: 34.87 GiB (0.3%) 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: OM8PGP41024Q-A0 
    size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s 
    lanes: 4 tech: SSD serial: <filter> fw-rev: ELFK0S.6 temp: 39.9 C 
    scheme: GPT 
  SMART: yes health: PASSED on: 190d 4h cycles: 7,063 
    read-units: 106,425,197 \[54.4 TB\] written-units: 106,361,480 \[54.4 TB\] 
  ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT2000MX500SSD1 
    family: Micron Client SSDs size: 1.82 TiB block-size: physical: 4096 B 
    logical: 512 B sata: 3.3 speed: 6.0 Gb/s tech: SSD serial: <filter> 
    fw-rev: 046 temp: 40 C scheme: GPT 
  SMART: yes state: enabled health: PASSED on: 1y 168d 2h cycles: 10030 
    written: 6.6 TiB 
  ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: Backup+ Hub BK 
    size: 7.28 TiB block-size: physical: 4096 B logical: 512 B type: USB 
    rev: 3.1 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter> 
    fw-rev: D781 scheme: GPT 
  SMART Message: A mandatory SMART command failed. Various possible causes. 
  Message: No optical or floppy data found. 
Partition: 
  ID-1: / raw-size: 47.51 GiB size: 46.59 GiB (98.06%) used: 33.92 GiB (72.8%) 
    fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p5 maj-min: 259:5 label: N/A 
    uuid: ea8f9b67-04f2-49c7-9d41-98f8382419e1 
  ID-2: /boot/efi raw-size: 3.95 GiB size: 3.92 GiB (99.22%) 
    used: 974.2 MiB (24.3%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 
    maj-min: 259:1 label: SYSTEM uuid: CA37-6A09 
Swap: 
  Alert: No swap data was found. 
Unmounted: 
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 852.55 GiB fs: ntfs label: N/A 
    uuid: 98DA81EBDA81C5CA 
  ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 47.7 GiB fs: btrfs 
    label: KDELinux uuid: 79ad71c0-4c00-493f-af9e-b4c2c97a8d38 
  ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 1.8 GiB fs: ntfs label: Recovery 
    uuid: 6A20821B2081EE7F 
  ID-4: /dev/sda1 maj-min: 8:1 size: 1.82 TiB fs: ntfs label: MINI-Data 
    uuid: 787BDE381E0A0803 
  ID-5: /dev/sdb1 maj-min: 8:17 size: 6.06 TiB fs: ntfs label: Backup-26 
    uuid: F492DFD792DF9D04 
  ID-6: /dev/sdb2 maj-min: 8:18 size: 1.21 TiB fs: exfat label: extra 
    uuid: 2A6A-7857 
USB: 
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 
    class-ID: 0900 
  Hub-2: 1-1:2 info: Super Top 4-Port hub ports: 4 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA 
    chip-ID: 14cd:8601 class-ID: 0900 
  Device-1: 1-1.1:4 info: Primax HP 710 Wireless KB MS Combo 
    type: keyboard,HID,mouse driver: hid-generic,usbhid interfaces: 3 rev: 2.0 
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA 
    chip-ID: 0461:4ef1 class-ID: 0301 
  Device-2: 1-1.2:5 info: Image+ NewEye 62 type: video,audio 
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA 
    chip-ID: 2757:3032 class-ID: 0102 serial: <filter> 
  Hub-3: 1-2:3 info: Seagate RSS LLC Backup Plus Hub ports: 3 rev: 2.1 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA 
    chip-ID: 0bc2:ab44 class-ID: 0900 
  Hub-4: 2-0:1 info: super-speed hub ports: 2 rev: 3.1 
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 
    class-ID: 0900 
  Hub-5: 2-2:2 info: Seagate RSS LLC Backup+ Hub ports: 3 rev: 3.0 
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bc2:ab45 
    class-ID: 0900 
  Device-1: 2-2.1:3 info: Seagate RSS LLC Backup Plus Hub (Mass Storage) 
    type: mass storage driver: uas interfaces: 1 rev: 3.1 
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bc2:ab38 
    class-ID: 0806 serial: <filter> 
  Hub-6: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 
    class-ID: 0900 
  Hub-7: 4-0:1 info: super-speed hub ports: 2 rev: 3.1 
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 
    class-ID: 0900 
  Hub-8: 5-0:1 info: hi-speed hub with single TT ports: 3 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 
    class-ID: 0900 
  Hub-9: 5-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2109:2811 
    class-ID: 0900 
  Device-1: 5-3:3 info: MediaTek Wireless_Device type: bluetooth 
    driver: btusb interfaces: 3 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 
    mode: 2.0 power: 100mA chip-ID: 0e8d:0608 class-ID: e001 serial: <filter> 
  Hub-10: 6-0:1 info: super-speed hub ports: 2 rev: 3.1 
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 
    class-ID: 0900 
  Hub-11: 6-1:2 info: VIA Labs Hub ports: 4 rev: 3.0 
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2109:8110 
    class-ID: 0900 
  Hub-12: 7-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 
    class-ID: 0900 
  Hub-13: 8-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 
    class-ID: 0900 
  Hub-14: 9-0:1 info: super-speed hub ports: 1 rev: 3.1 
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 
    class-ID: 0900 
  Hub-15: 10-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 
    class-ID: 0900 
  Hub-16: 11-0:1 info: super-speed hub ports: 1 rev: 3.1 
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 
    class-ID: 0900 
Sensors: 
  System Temperatures: cpu: 48.6 C mobo: 48.0 C gpu: amdgpu temp: 48.0 C 
  Fan Speeds (rpm): N/A 
Repos: 
  Packages: 1453 pm: pacman pkgs: 1443 libs: 399 tools: pamac pm: flatpak 
    pkgs: 10 
  Active pacman repo servers in: /etc/pacman.d/mirrorlist 
    1: https://ziply.mm.fcix.net/manjaro/testing/$repo/$arch 
    2: https://opencolo.mm.fcix.net/manjaro/testing/$repo/$arch 
    3: https://codingflyboy.mm.fcix.net/manjaro/testing/$repo/$arch 
    4: https://mirror.fcix.net/manjaro/testing/$repo/$arch 
    5: https://irltoolkit.mm.fcix.net/manjaro/testing/$repo/$arch 
    6: https://mirrors.ocf.berkeley.edu/manjaro/testing/$repo/$arch 
    7: https://nocix.mm.fcix.net/manjaro/testing/$repo/$arch 
    8: https://forksystems.mm.fcix.net/manjaro/testing/$repo/$arch 
    9: https://ohioix.mm.fcix.net/manjaro/testing/$repo/$arch 
    10: https://coresite.mm.fcix.net/manjaro/testing/$repo/$arch 
    11: https://cofractal-ewr.mm.fcix.net/manjaro/testing/$repo/$arch 
    12: https://volico.mm.fcix.net/manjaro/testing/$repo/$arch 
    13: https://nnenix.mm.fcix.net/manjaro/testing/$repo/$arch 
    14: https://southfront.mm.fcix.net/manjaro/testing/$repo/$arch 
    15: https://mirror.math.princeton.edu/pub/manjaro/testing/$repo/$arch 
    16: https://repo.ialab.dsu.edu/manjaro/testing/$repo/$arch 
Processes: 
  CPU top: 5 of 362 
  1: cpu: 100% command: ps pid: 2469 mem: 3.91 MiB (0.0%) 
  2: cpu: 6.2% command: plasmashell pid: 1179 mem: 379.3 MiB (1.2%) 
  3: cpu: 5.2% command: manjaro-hello started-by: python3 pid: 1433 
    mem: 522.9 MiB (1.6%) 
  4: cpu: 3.9% command: kwin_wayland pid: 1019 mem: 216.1 MiB (0.6%) 
  5: cpu: 2.8% command: systemsettings pid: 2295 mem: 225.4 MiB (0.7%) 
  Memory top: 5 of 362 
  1: mem: 522.9 MiB (1.6%) command: manjaro-hello started-by: python3 
    pid: 1433 cpu: 5.2% 
  2: mem: 379.3 MiB (1.2%) command: plasmashell pid: 1179 cpu: 6.2% 
  3: mem: 225.4 MiB (0.7%) command: systemsettings pid: 2295 cpu: 2.8% 
  4: mem: 216.1 MiB (0.6%) command: kwin_wayland pid: 1019 cpu: 3.9% 
  5: mem: 99.5 MiB (0.3%) command: konsole pid: 2347 cpu: 1.0% 
Info: 
  Processes: 362 Power: uptime: 0m states: freeze,mem,disk suspend: deep 
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot, 
    suspend, test_resume image: 12.15 GiB services: org_kde_powerdevil, 
    power-profiles-daemon, upowerd Init: systemd v: 261 default: graphical 
    tool: systemctl 
  Compilers: gcc: 16.1.1 Shell: Sudo (sudo) v: 1.9.17p2 default: Bash 
    v: 5.3.15 running-in: konsole inxi: 3.3.41

_{Mod Edit: Fixed formatting}

dmt · 30 July 2026 22:33

I’d use that then.

Is there a reason you want to use 7.2.0rc5-1?

If you want help figuring it out, then you’ll probably need to provide more information about the symptoms than:

There may be some clues in the journal.

journalctl

nikgnomic · 30 July 2026 23:22

For 7.2 release candidate kernels it may be better to switch to unstable branch
that has 7.2.0rc5-2 at the moment, but should have 7.2-rc5-4 soon

soundofthunder · 31 July 2026 01:26

@byron4120

Please devote some time to learning how this forum works.

The forum software used is Discourse, which is a popular base for many online forums, which may be useful to know. However, more useful will be taking the time to examine Support categories available to post in, and searching for other information such as Forum Rules.

Your post has been moved to a dedicated topic.

Make the most of this by providing a more informative description of your issue which might help others gain a better understanding of the the problem.

Please also provide your system information in accordance with forum guidelines.

[Mini-HowTo] Provide System Information

Basic details provided by *-fetch type apps might give enough information for someone wishing to buy a computer, however, for Support purposes it’s best to ask your system directly.

Output of the inxi command will generate more useful and detailed information for those who may wish to help:

Suggested inxi command (use either):


`inxi -zv8`	(short-form)
`inxi --filter --verbosity=8`	(long-form)

man inxi (The inxi manual)

Command output should be presented as pre-formatted text in accordance with forum guidelines.

Running inxi within a chroot environment

Add --color=0 to the long-form command, or…
Change the short-form command to inxi -zv8c0

Your privacy is respected

[Mini-HowTo] Present code or command output

Note: Grave accent (or, backtick) characters are used.

For inline code or to show a single command:

please follow this simple example: code here.

For multi-line command output:

place text beween two rows of three (```) backtick characters to form a scrollable text box, or …
use the </> button in the Compose window to achieve the same result.

The empty row between these rows of backtick characters is where to paste any multi-line command output (such as inxi).

An example of a pre-formatted text enclosure:

What is a Quark?

A. In Physics, an elementary particle and fundamental constituent of matter. 
B. A character from the Star Trek: "Deep Space Nine" television series.
C. A soft, creamy, usually unsalted cheese traditional to central Europe.

I should also point out that that kernel 7.2.0rc5-1 is a release candidate – that’s what the “rc” stands for – as such, it is expected that there might be issues with it.

Generally, only users with an interest in experimenting with a new kernel and/or participating in either the Unstable or Testing branches will install a pre-release kernel.

If your issue is a result of using a release candidate kernel, it might be prudent to install the well supported kernel 6.18 (LTS) instead.

This would involve booting from a live USB, entering a chroot environment, and installing the kernel as described in the following Wiki article:

https://wiki.manjaro.org/index.php?title=Manjaro_Kernels

Note: At the time of writing, the Manjaro Wiki is experiencing some difficulty with an ongoing botnet attack. Please be patient.

It appears that The Wayback Machine (web.archive.org) is also offline currently, so I am unable to offer an alternative link.

Teo · 31 July 2026 03:07

It might be useful to see where does it exactly hang. When rebooting hit the esc key to show the grub menu and edit the boot entry removing quiet splash

byron4120 · 31 July 2026 18:56

Further Clarification

It hangs on the shutdown process not the grub process. It never gets to the restart of the CPU. I tried unstable branch and rc-2 has the same issue. The reason I brought the topic up was to report issues on testing branch. I run stable kernels most of the time. My Dell laptop (intel I7) performs properly with the newer Kernels.

pheiduck · 2 August 2026 20:27

I encountered a regression bug during shutdown on: Framework Laptop 13 (AMD Ryzen 5 7640U with Radeon 760M graphics card)

The Fix will land into 7.3 but may not be backported to 7.2:

byron4120 · 3 August 2026 20:39

as a POI 7.2.0RC6-1 has same issue. Back on 7.1 - Will test or rebuild & test on next update

dmt · 3 August 2026 22:46

I can’t replicate it (on a desktop), 7.2.0rc6-1 reboots quickly for me, so it might be something with your hardware or your setup.

If this thread is to be anything but a waste of time, you need to provide information about the issue.

Do you see messages on shutdown?
If no, then do this and answer the other questions

What’s the last message you see during shutdown?
Are there any other messages that might indicate the issue, eg a stop job with infinite timeout?
Is there anything in the journal that might shed light on the issue?

Keep in mind, if it’s actually an issue with the kernel - we’re not kernel devs. Also as it’s an RC, the issue may be resolved by the time it’s released.

pheiduck · 5 August 2026 15:58

7.2-rc6 is also a bad one for my fw laptop

byron4120 · 7 August 2026 02:09

I rebuilt my system and tried again. Also ran diagnostics etc. Wayland hang is present. Changed config by dropping external drives. No changes – will wait until later update. I hope this gets bumped up to Kernel developers.