Hi @Stephix
Is tearfree active?
Thanks
I tried different lines for xorg:
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
and
Option "DRI" "2"
because Xorg.0.log says
(EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
No change
I will try to save the output of dmesg despite of the streaks
Are you sure, you have no hybrid card?
inxi -Gazy
Graphics:
Device-1: Intel UHD Graphics vendor: Lenovo driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:9b41
Device-2: IMC Networks Integrated Camera type: USB driver: uvcvideo
bus ID: 1-5:3 chip ID: 13d3:56a6 serial: <filter>
Display: x11 server: X.Org 1.20.9 compositor: picom v: git-dac85
driver: intel display ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP1 res: 1920x1080 dpi: 168 size: 290x170mm (11.4x6.7")
diag: 336mm (13.2")
OpenGL: renderer: Mesa Intel UHD Graphics (CML GT2) v: 4.6 Mesa 20.2.2
direct render: Yes
I obtain the same things within Xorg.0.log and linux58 or linux59, and no Option “TearFree” “true”.
[steph@steph-L13 ~]$ cat Xorg-59.txt | grep EE
[ 4.164] Current Operating System: Linux steph-L13 5.9.10-1-MANJARO #1 SMP PREEMPT Sun Nov 22 11:25:19 UTC 2020 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.180] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.180] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.842] (II) Initializing extension MIT-SCREEN-SAVER
[ 6.276] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 6.499] (EE) libinput: Elan Touchpad: Failed to create a device for /dev/input/mouse0
[ 6.499] (EE) PreInit returned 2 for "Elan Touchpad"
[ 7.077] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[steph@steph-L13 ~]$ cat xorg-58.txt | grep EE
[ 3.653] Current Operating System: Linux steph-L13 5.8.18-1-MANJARO #1 SMP PREEMPT Sun Nov 1 14:10:04 UTC 2020 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.680] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.680] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.269] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.530] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 4.598] (EE) libinput: Elan Touchpad: Failed to create a device for /dev/input/mouse0
[ 4.598] (EE) PreInit returned 2 for "Elan Touchpad"
[ 4.972] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[steph@steph-L13 ~]$
But it’s fine with linux58 kernel.
In both cases direct rendering is enable and seems to run.
name of display: :0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
The streaks occurs early at the boot. Before lightdm. Consoles (Ctrl-Alt-F2 etc.) are affected too.
I am experiencing the same on my Intel NUC (7PJYH). Screen tearing, almost like a “seizure”.
System runs fine on 5.8.18-1
, but upgrading to 5.9.10-1
ensures screen tearing. Also upgrading to the experimental kernel 5.10.xx
causes these screen tearing issues to appear.
My inxi -Fazy
output:
System:
Kernel: 5.8.18-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.8-x86_64
root=UUID=b50f1734-712a-4dc7-91e0-553e0d402381 rw quiet
resume=UUID=f35658d8-8018-4921-a866-88943a264be4 udev.log_priority=3
Desktop: Xfce 4.14.3 tk: Gtk 3.24.23 info: xfce4-panel wm: xfwm4
dm: LightDM 1.30.0 Distro: Manjaro Linux
Machine:
Type: Mini-pc System: Intel product: NUC7PJYH v: J67992-400 serial: <filter>
Chassis: type: 35 v: 2.0 serial: <filter>
Mobo: Intel model: NUC7JYB v: J67969-400 serial: <filter> UEFI: Intel
v: JYGLKCPX.86A.0051.2019.0614.1047 date: 06/14/2019
Battery:
Device-1: hidpp_battery_0 model: Logitech MX Ergo Multi-Device Trackball
serial: <filter> charge: 100% (should be ignored) rechargeable: yes
status: Full
CPU:
Info: Quad Core model: Intel Pentium Silver J5005 bits: 64 type: MCP
arch: Goldmont Plus family: 6 model-id: 7A (122) stepping: 1 microcode: 34
L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11984
Speed: 2685 MHz min/max: 800/2800 MHz Core speeds (MHz): 1: 2692 2: 2676
3: 2685 4: 2686
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel UHD Graphics 605 driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:3184
Display: x11 server: X.Org 1.20.9 driver: intel unloaded: modesetting
alternate: fbdev,vesa display ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1080 s-dpi: 96 s-size: 677x285mm (26.7x11.2")
s-diag: 735mm (28.9")
OpenGL: renderer: Mesa Intel UHD Graphics 605 (GLK 3) v: 4.6 Mesa 20.2.2
direct render: Yes
Audio:
Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci
bus ID: 00:0e.0 chip ID: 8086:3198
Device-2: Creative SB Omni Surround 5.1 type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-3.1:4 chip ID: 041e:322c
serial: <filter>
Sound Server: ALSA v: k5.8.18-1-MANJARO
Network:
Device-1: Intel driver: iwlwifi v: kernel port: f000 bus ID: 00:0c.0
chip ID: 8086:31dc
IF: wlo2 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Intel driver: r8169 v: kernel port: e000 bus ID: 02:00.0
chip ID: 10ec:8168
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 232.89 GiB used: 9.22 GiB (4.0%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda vendor: Samsung model: SSD 850 EVO 250GB size: 232.89 GiB
block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter>
rev: 1B6Q scheme: GPT
Partition:
ID-1: / raw size: 223.79 GiB size: 219.28 GiB (97.98%) used: 9.22 GiB (4.2%)
fs: ext4 dev: /dev/sda2
Swap:
Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.80 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 189 Uptime: 15m Memory: 7.37 GiB used: 1.93 GiB (26.2%)
Init: systemd v: 246 Compilers: gcc: N/A Packages: pacman: 1055 lib: 335
Shell: Bash v: 5.0.18 running in: alacritty inxi: 3.1.08
Will update with an [EDIT] as I don’t have the 20-intel.conf
on my system.
[EDIT]: Adding the 20-intel.conf
file with enabled TearFree didn’t resolve the issue on 5.9.10-1
unfortunately. Going back to 5.8.18-1
for now.
Hi rswaagman
Do you use lightdm ?
If I don’t init lightdm while booting and then run “startx”, the screen is correct with kernel 5.9.
Ok i tried myself on my older laptop:
$ inxi -Fazy
System:
Kernel: 5.9.10-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.9-x86_64
root=UUID=f0ad847f-8932-4873-8ad4-28586960d434 rw quiet udev.log_priority=3
resume=UUID=f0ad847f-8932-4873-8ad4-28586960d434 resume_offset=1273856..
video=eDP1:1366x768@60.02
Desktop: Xfce 4.14.3 tk: Gtk 3.24.23 info: xfce4-panel wm: xfwm4
dm: LightDM 1.30.0 Distro: Manjaro Linux
Machine:
Type: Laptop System: LENOVO product: 80G0 v: Lenovo G50-30 serial: <filter>
Chassis: type: 10 v: Lenovo G50-30 serial: <filter>
Mobo: LENOVO model: Lancer 5A6 v: SDK0F82993WIN serial: <filter>
UEFI: LENOVO v: A7CN48WW date: 08/03/2015
Battery:
ID-1: BAT0 charge: 39.1 Wh condition: 71.0/72.0 Wh (99%) volts: 15.5/14.4
model: Lenovo type: Unknown serial: <filter> status: Discharging
CPU:
Info: Dual Core model: Intel Celeron N2830 bits: 64 type: MCP
arch: Silvermont family: 6 model-id: 37 (55) stepping: 8 microcode: 838
L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 8671
Speed: 1406 MHz min/max: 500/2416 MHz Core speeds (MHz): 1: 2023 2: 2062
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Not affected
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0f31
Device-2: Acer Lenovo EasyCamera type: USB driver: uvcvideo bus ID: 1-4.1:3
chip ID: 5986:0652 serial: <filter>
Display: x11 server: X.Org 1.20.9 driver: intel unloaded: modesetting
alternate: fbdev,vesa display ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: eDP1 res: 1366x768 hz: 60 dpi: 102 size: 340x190mm (13.4x7.5")
diag: 389mm (15.3")
OpenGL: renderer: Mesa DRI Intel HD Graphics (BYT) v: 4.2 Mesa 20.2.2
compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio
vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:0f04
Sound Server: ALSA v: k5.9.10-1-MANJARO
Network:
Device-1: Realtek RTL8723BE PCIe Wireless Network Adapter
vendor: Lenovo Z50-75 driver: rtl8723be v: kernel port: 2000 bus ID: 02:00.0
chip ID: 10ec:b723
IF: wlp2s0 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel port: 1000 bus ID: 03:00.0
chip ID: 10ec:8168
IF: enp3s0 state: down mac: <filter>
Drives:
Local Storage: total: 298.09 GiB used: 73.60 GiB (24.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda vendor: Seagate model: ST320LT012-1DG14C size: 298.09 GiB
block size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
rotation: 5400 rpm serial: <filter> rev: LVM1 scheme: GPT
Partition:
ID-1: / raw size: 249.26 GiB size: 244.35 GiB (98.03%)
used: 51.20 GiB (21.0%) fs: ext4 dev: /dev/sda5
Swap:
Kernel: swappiness: 10 (default 60) cache pressure: 100 (default)
ID-1: swap-1 type: file size: 9.77 GiB used: 8.6 MiB (0.1%) priority: -2
file: /swapfile
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 188 Uptime: 1h 19m Memory: 3.73 GiB used: 2.39 GiB (64.2%)
Init: systemd v: 246 Compilers: gcc: 10.2.0 Packages: pacman: 10
Xorg.0.log
$ cat /var/log/Xorg.0.log
[ 3183.283]
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[ 3183.283] Build Operating System: Linux Manjaro Linux
[ 3183.283] Current Operating System: Linux Lenovo-G50-30 5.9.10-1-MANJARO #1 SMP PREEMPT Sun Nov 22 11:25:19 UTC 2020 x86_64
[ 3183.283] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9-x86_64 root=UUID=f0ad847f-8932-4873-8ad4-28586960d434 rw quiet udev.log_priority=3 resume=UUID=f0ad847f-8932-4873-8ad4-28586960d434 resume_offset=1273856.. video=eDP1:1366x768@60.02
[ 3183.283] Build Date: 20 November 2020 09:03:19PM
[ 3183.283]
[ 3183.283] Current version of pixman: 0.40.0
[ 3183.284] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3183.284] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3183.284] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 24 12:37:35 2020
[ 3183.284] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3183.284] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3183.285] (==) No Layout section. Using the first Screen section.
[ 3183.285] (==) No screen section available. Using defaults.
[ 3183.285] (**) |-->Screen "Default Screen Section" (0)
[ 3183.285] (**) | |-->Monitor "<default monitor>"
[ 3183.286] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3183.286] (==) Automatically adding devices
[ 3183.286] (==) Automatically enabling devices
[ 3183.286] (==) Automatically adding GPU devices
[ 3183.286] (==) Automatically binding GPU devices
[ 3183.286] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3183.286] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 3183.286] Entry deleted from font path.
[ 3183.286] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 3183.286] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 3183.286] Entry deleted from font path.
[ 3183.286] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 3183.286] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 3183.286] Entry deleted from font path.
[ 3183.286] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 3183.286] Entry deleted from font path.
[ 3183.286] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 3183.286] Entry deleted from font path.
[ 3183.286] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 3183.286] Entry deleted from font path.
[ 3183.286] (==) FontPath set to:
[ 3183.287] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3183.287] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3183.287] (II) Module ABI versions:
[ 3183.287] X.Org ANSI C Emulation: 0.4
[ 3183.287] X.Org Video Driver: 24.1
[ 3183.287] X.Org XInput driver : 24.1
[ 3183.287] X.Org Server Extension : 10.0
[ 3183.290] (++) using VT number 7
[ 3183.290] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3183.295] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3183.316] (--) PCI:*(0@0:2:0) 8086:0f31:17aa:3905 rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00003050/8, BIOS @ 0x????????/131072
[ 3183.316] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3183.316] (II) LoadModule: "glx"
[ 3183.317] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3183.337] (II) Module glx: vendor="X.Org Foundation"
[ 3183.337] compiled for 1.20.9, module version = 1.0.0
[ 3183.337] ABI class: X.Org Server Extension, version 10.0
[ 3183.337] (==) Matched intel as autoconfigured driver 0
[ 3183.337] (==) Matched modesetting as autoconfigured driver 1
[ 3183.337] (==) Matched fbdev as autoconfigured driver 2
[ 3183.337] (==) Matched vesa as autoconfigured driver 3
[ 3183.337] (==) Assigned the driver to the xf86ConfigLayout
[ 3183.337] (II) LoadModule: "intel"
[ 3183.338] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3183.338] (II) Module intel: vendor="X.Org Foundation"
[ 3183.338] compiled for 1.20.9, module version = 2.99.917
[ 3183.339] Module class: X.Org Video Driver
[ 3183.339] ABI class: X.Org Video Driver, version 24.1
[ 3183.339] (II) LoadModule: "modesetting"
[ 3183.339] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3183.364] (II) Module modesetting: vendor="X.Org Foundation"
[ 3183.364] compiled for 1.20.9, module version = 1.20.9
[ 3183.364] Module class: X.Org Video Driver
[ 3183.364] ABI class: X.Org Video Driver, version 24.1
[ 3183.364] (II) LoadModule: "fbdev"
[ 3183.364] (WW) Warning, couldn't open module fbdev
[ 3183.364] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3183.364] (II) LoadModule: "vesa"
[ 3183.365] (WW) Warning, couldn't open module vesa
[ 3183.365] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3183.365] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3183.366] (II) intel: Driver for Intel(R) HD Graphics
[ 3183.366] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 3183.366] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 3183.366] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3183.385] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200715
[ 3183.385] (II) intel(0): SNA compiled from 2.99.917-912-gad5540f6
[ 3183.402] (WW) Falling back to old probe method for modesetting
[ 3183.402] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 3183.402] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 3183.402] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3183.403] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3183.403] (==) intel(0): RGB weight 888
[ 3183.403] (==) intel(0): Default visual is TrueColor
[ 3183.404] (II) intel(0): Output eDP1 has no monitor section
[ 3183.404] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 3183.404] (II) intel(0): Enabled output eDP1
[ 3183.405] (II) intel(0): Output VGA1 has no monitor section
[ 3183.405] (II) intel(0): Enabled output VGA1
[ 3183.405] (II) intel(0): Output DP1 has no monitor section
[ 3183.405] (II) intel(0): Enabled output DP1
[ 3183.406] (II) intel(0): Output HDMI1 has no monitor section
[ 3183.406] (II) intel(0): Enabled output HDMI1
[ 3183.406] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 3183.406] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3183.406] (II) intel(0): Enabled output VIRTUAL1
[ 3183.406] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 3183.407] (==) intel(0): TearFree disabled
[ 3183.407] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3183.407] (==) intel(0): DPI set to (96, 96)
[ 3183.407] (II) Loading sub module "dri3"
[ 3183.407] (II) LoadModule: "dri3"
[ 3183.407] (II) Module "dri3" already built-in
[ 3183.407] (II) Loading sub module "dri2"
[ 3183.407] (II) LoadModule: "dri2"
[ 3183.407] (II) Module "dri2" already built-in
[ 3183.407] (II) Loading sub module "present"
[ 3183.407] (II) LoadModule: "present"
[ 3183.407] (II) Module "present" already built-in
[ 3183.407] (II) UnloadModule: "modesetting"
[ 3183.407] (II) Unloading modesetting
[ 3183.408] (II) intel(0): SNA initialized with Baytrail (gen7) backend
[ 3183.408] (==) intel(0): Backing store enabled
[ 3183.408] (==) intel(0): Silken mouse disabled
[ 3183.408] (II) intel(0): HW Cursor enabled
[ 3183.409] (==) intel(0): DPMS enabled
[ 3183.409] (==) intel(0): Display hotplug detection enabled
[ 3183.409] (II) intel(0): [DRI2] Setup complete
[ 3183.409] (II) intel(0): [DRI2] DRI driver: i965
[ 3183.409] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 3183.410] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 3183.410] (II) intel(0): hardware support for Present enabled
[ 3183.410] (II) Initializing extension Generic Event Extension
[ 3183.410] (II) Initializing extension SHAPE
[ 3183.410] (II) Initializing extension MIT-SHM
[ 3183.411] (II) Initializing extension XInputExtension
[ 3183.411] (II) Initializing extension XTEST
[ 3183.419] (II) Initializing extension BIG-REQUESTS
[ 3183.420] (II) Initializing extension SYNC
[ 3183.420] (II) Initializing extension XKEYBOARD
[ 3183.420] (II) Initializing extension XC-MISC
[ 3183.421] (II) Initializing extension SECURITY
[ 3183.421] (II) Initializing extension XFIXES
[ 3183.421] (II) Initializing extension RENDER
[ 3183.422] (II) Initializing extension RANDR
[ 3183.422] (II) Initializing extension COMPOSITE
[ 3183.423] (II) Initializing extension DAMAGE
[ 3183.423] (II) Initializing extension MIT-SCREEN-SAVER
[ 3183.423] (II) Initializing extension DOUBLE-BUFFER
[ 3183.424] (II) Initializing extension RECORD
[ 3183.424] (II) Initializing extension DPMS
[ 3183.428] (II) Initializing extension Present
[ 3183.428] (II) Initializing extension DRI3
[ 3183.429] (II) Initializing extension X-Resource
[ 3183.429] (II) Initializing extension XVideo
[ 3183.430] (II) Initializing extension XVideo-MotionCompensation
[ 3183.430] (II) Initializing extension GLX
[ 3183.482] (II) AIGLX: Loaded and initialized i965
[ 3183.482] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3183.483] (II) Initializing extension XFree86-VidModeExtension
[ 3183.483] (II) Initializing extension XFree86-DGA
[ 3183.483] (II) Initializing extension XFree86-DRI
[ 3183.483] (II) Initializing extension DRI2
[ 3183.504] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3183.510] (II) intel(0): Setting screen physical size to 361 x 203
[ 3183.682] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 3183.682] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3183.682] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3183.682] (**) Power Button: Applying InputClass "system-keyboard"
[ 3183.682] (II) LoadModule: "libinput"
[ 3183.682] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 3183.688] (II) Module libinput: vendor="X.Org Foundation"
[ 3183.689] compiled for 1.20.8, module version = 0.30.0
[ 3183.689] Module class: X.Org XInput Driver
[ 3183.689] ABI class: X.Org XInput driver, version 24.1
[ 3183.689] (II) Using input driver 'libinput' for 'Power Button'
[ 3183.689] (**) Power Button: always reports core events
[ 3183.689] (**) Option "Device" "/dev/input/event2"
[ 3183.689] (**) Option "_source" "server/udev"
[ 3183.694] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 3183.694] (II) event2 - Power Button: device is a keyboard
[ 3183.695] (II) event2 - Power Button: device removed
[ 3183.715] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 3183.715] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3183.715] (**) Option "xkb_model" "pc105"
[ 3183.715] (**) Option "xkb_layout" "de"
[ 3183.715] (**) Option "xkb_variant" "nodeadkeys"
[ 3183.805] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 3183.805] (II) event2 - Power Button: device is a keyboard
[ 3183.807] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 3183.807] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3183.807] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3183.807] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3183.807] (II) Using input driver 'libinput' for 'Video Bus'
[ 3183.807] (**) Video Bus: always reports core events
[ 3183.807] (**) Option "Device" "/dev/input/event3"
[ 3183.807] (**) Option "_source" "server/udev"
[ 3183.810] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 3183.810] (II) event3 - Video Bus: device is a keyboard
[ 3183.811] (II) event3 - Video Bus: device removed
[ 3183.838] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 3183.838] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3183.838] (**) Option "xkb_model" "pc105"
[ 3183.838] (**) Option "xkb_layout" "de"
[ 3183.838] (**) Option "xkb_variant" "nodeadkeys"
[ 3183.842] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 3183.842] (II) event3 - Video Bus: device is a keyboard
[ 3183.844] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3183.844] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3183.844] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3183.844] (**) Power Button: Applying InputClass "system-keyboard"
[ 3183.844] (II) Using input driver 'libinput' for 'Power Button'
[ 3183.844] (**) Power Button: always reports core events
[ 3183.844] (**) Option "Device" "/dev/input/event1"
[ 3183.844] (**) Option "_source" "server/udev"
[ 3183.847] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 3183.847] (II) event1 - Power Button: device is a keyboard
[ 3183.847] (II) event1 - Power Button: device removed
[ 3183.858] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 3183.858] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 3183.858] (**) Option "xkb_model" "pc105"
[ 3183.858] (**) Option "xkb_layout" "de"
[ 3183.858] (**) Option "xkb_variant" "nodeadkeys"
[ 3183.861] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 3183.862] (II) event1 - Power Button: device is a keyboard
[ 3183.864] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 3183.864] (II) No input driver specified, ignoring this device.
[ 3183.864] (II) This device may have been added with another device file.
[ 3183.867] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event10)
[ 3183.867] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "evdev keyboard catchall"
[ 3183.868] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[ 3183.868] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "system-keyboard"
[ 3183.868] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[ 3183.868] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[ 3183.868] (**) Option "Device" "/dev/input/event10"
[ 3183.868] (**) Option "_source" "server/udev"
[ 3183.879] (II) event10 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[ 3183.879] (II) event10 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[ 3183.880] (II) event10 - Lenovo EasyCamera: Lenovo EasyC: device removed
[ 3183.905] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/input/input11/event10"
[ 3183.905] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 9)
[ 3183.905] (**) Option "xkb_model" "pc105"
[ 3183.905] (**) Option "xkb_layout" "de"
[ 3183.905] (**) Option "xkb_variant" "nodeadkeys"
[ 3183.910] (II) event10 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[ 3183.910] (II) event10 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[ 3183.911] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 3183.911] (II) No input driver specified, ignoring this device.
[ 3183.911] (II) This device may have been added with another device file.
[ 3183.913] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 3183.913] (II) No input driver specified, ignoring this device.
[ 3183.913] (II) This device may have been added with another device file.
[ 3183.914] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 3183.914] (II) No input driver specified, ignoring this device.
[ 3183.914] (II) This device may have been added with another device file.
[ 3183.919] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[ 3183.919] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 3183.919] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 3183.919] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 3183.919] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 3183.919] (**) Ideapad extra buttons: always reports core events
[ 3183.920] (**) Option "Device" "/dev/input/event5"
[ 3183.920] (**) Option "_source" "server/udev"
[ 3183.926] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 3183.926] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 3183.927] (II) event5 - Ideapad extra buttons: device removed
[ 3183.955] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event5"
[ 3183.955] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 10)
[ 3183.955] (**) Option "xkb_model" "pc105"
[ 3183.955] (**) Option "xkb_layout" "de"
[ 3183.955] (**) Option "xkb_variant" "nodeadkeys"
[ 3183.958] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 3183.958] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 3183.960] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 3183.960] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3183.960] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 3183.960] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 3183.961] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 3183.961] (**) AT Translated Set 2 keyboard: always reports core events
[ 3183.961] (**) Option "Device" "/dev/input/event4"
[ 3183.961] (**) Option "_source" "server/udev"
[ 3183.968] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 3183.968] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 3183.969] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 3183.985] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 3183.985] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3183.985] (**) Option "xkb_model" "pc105"
[ 3183.985] (**) Option "xkb_layout" "de"
[ 3183.985] (**) Option "xkb_variant" "nodeadkeys"
[ 3183.989] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 3183.989] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 3183.992] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 3183.992] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3183.992] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 3183.993] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 3183.993] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3183.993] (**) Option "Device" "/dev/input/event9"
[ 3183.993] (**) Option "_source" "server/udev"
[ 3184.000] (II) event9 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 3184.010] (II) event9 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 3184.010] (II) event9 - SynPS/2 Synaptics TouchPad: device removed
[ 3184.039] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event9"
[ 3184.039] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3184.040] (**) Option "AccelerationScheme" "none"
[ 3184.040] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 3184.040] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3184.040] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3184.044] (II) event9 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 3184.047] (II) event9 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 3184.053] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3184.053] (II) No input driver specified, ignoring this device.
[ 3184.053] (II) This device may have been added with another device file.
[ 3185.410] (II) intel(0): EDID vendor "AUO", prod id 16620
[ 3185.410] (II) intel(0): Printing DDC gathered Modelines:
[ 3185.410] (II) intel(0): Modeline "1366x768"x0.0 76.30 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz eP)
Here it works like it should.
Yes, it was fresh Manjaro XFCE (Minimal) installation. I will try what you suggest as soon as I will figure out how to not init lightdm and running startx
This seems not to be relative to lightdm because the problem occurs with lxdm.
I’m not able to find out what’s wrong between booting or not the dm…
Well, I guess we either wait for someone to help and just remain on 5.8
for the time being, or hope that the issue gets resolved on a future update of 5.9
or on the new LTS kernel 5.10
.
Let’s hope this issue gets resolved in time
I have a similar problem, reported elsewhere (can’t post links in my posts it seems for some reason).
There I have been pointed to this thread.
For me (lightdm with i3), when booting into X the screen is glitchy, like colors messed up and such - unusable. But if I logout and back in, everything is fine.
inxi -Gazy
:
Graphics:
Device-1: Intel vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:9bca
Device-2: Chicony Integrated Camera type: USB driver: uvcvideo bus ID: 1-8:2
chip ID: 04f2:b67d
Display: x11 server: X.Org 1.20.9 compositor: picom v: git-dac85
driver: intel unloaded: modesetting alternate: fbdev,vesa display ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP1 res: 1920x1080 hz: 60 dpi: 157 size: 310x170mm (12.2x6.7")
diag: 354mm (13.9")
OpenGL: renderer: Mesa Intel UHD Graphics (CML GT2) v: 4.6 Mesa 20.2.2
direct render: Yes
So also Lenovo i915, so that is probably related.
I’ll be a monkey’s uncle if the problem isn’t related to the refresh rate. I bet if you delete ~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xml and reboot (the file will get regenerated when you reboot) kernel 5.10 will work fine.
Thanks
I’m using i3wm…
Problem not solved with kernel 5.10.2-2
Nuts
I don’t know anything about i3wm. Does it let you change the refresh rate? If so, try changing the refresh rate from the default (60hz or whatever the default is) to something else and see if that has any effect, that would at least confirm if the problem is related to the refresh rate.
I tried to change refresh rate with xrandr but can’t obtain any change.
I compared with a correct display (other kernel) and the rate is the same (60).
It seems to me that the incorrect display goes beyond the width screen size…
Perhaps vsync/hsync is not set as it should be
I have to investigate. At this time I don’t know how to…
I have the same problem with my Acer Aspire Notebook with kernel 5.9 and 5.10.
Graphics:
Device-1: Intel HD Graphics 620 vendor: Acer Incorporated ALI driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:5916
Device-2: Chicony VGA Webcam type: USB driver: uvcvideo bus ID: 1-7:4
chip ID: 04f2:b47f serial: <filter>
Display: x11 server: X.Org 1.20.10 driver: intel display ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP1 res: 1920x1080 hz: 60 dpi: 143 size: 340x190mm (13.4x7.5")
diag: 389mm (15.3")
OpenGL: renderer: Mesa Intel HD Graphics 620 (KBL GT2) v: 4.6 Mesa 20.3.1
direct render: Yes
Found the solution here: https://forum.manjaro.org/t/screen-tearing-intel-i915-kernel-5-9-and-5-10/45495/4?u=bankman
Workaround for me posted here…
This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.