> System: Kernel: 5.4.124-1-MANJARO x86_64 bits: 64 Desktop: KDE Plasma 5.21.5 Distro: Manjaro Linux
> Machine: Type: Laptop System: CLEVO product: W25xHPx v: N/A serial: <filter>
> Mobo: CLEVO model: W25xHPx serial: <filter> BIOS: American Megatrends v: 4.6.4 date: 08/12/2011
> Battery: ID-1: BAT charge: 45.0 Wh (100.0%) condition: 45.0/48.8 Wh (92.2%)
> CPU: Info: Dual Core model: Intel Core i3-2330M bits: 64 type: MT MCP cache: L2: 3 MiB
> Speed: 798 MHz min/max: 800/2200 MHz Core speeds (MHz): 1: 798 2: 798 3: 798 4: 798
> Graphics: Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics driver: i915 v: kernel
> Device-2: NVIDIA GF108M [GeForce GT 520M] driver: nouveau v: kernel
> Display: x11 server: X.Org 1.20.11 driver: loaded: intel,nouveau unloaded: modesetting
> resolution: 1366x768~60Hz
> OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2) v: 3.3 Mesa 21.1.2
> Audio: Device-1: Intel 6 Series/C200 Series Family High Definition Audio driver: snd_hda_intel
> Device-2: NVIDIA GF108 High Definition Audio driver: snd_hda_intel
> Sound Server-1: ALSA v: k5.4.124-1-MANJARO running: yes
> Sound Server-2: PulseAudio v: 14.2 running: yes
> Network: Device-1: Intel Centrino Wireless-N 1030 [Rainbow Peak] driver: iwlwifi
> IF: wlp4s0 state: up mac: <filter>
> Device-2: JMicron JMC250 PCI Express Gigabit Ethernet driver: jme
> IF: enp5s0f0 state: down mac: <filter>
> Drives: Local Storage: total: 931.51 GiB used: 17.7 GiB (1.9%)
> ID-1: /dev/sda vendor: Samsung model: HN-M101MBB size: 931.51 GiB
> Partition: ID-1: / size: 901.96 GiB used: 17.7 GiB (2.0%) fs: ext4 dev: /dev/sda1
> Swap: Alert: No swap data was found.
> Sensors: System Temperatures: cpu: 57.0 C mobo: N/A gpu: nouveau temp: 46.0 C
> Fan Speeds (RPM): N/A
> Info: Processes: 163 Uptime: 6m Memory: 3.75 GiB used: 1.47 GiB (39.1%) Shell: Bash inxi: 3.3.04
und
> ------------------------------------------------------------
> No config file found so creating a fresh one in:
> /home/timk/.config/pulseaudio-ctl/config
>
> Edit this file if desired.
> ------------------------------------------------------------
> pulseaudio-ctl v1.67
>
> /usr/bin/pulseaudio-ctl {up,down,mute,mute-input,set,atmost,full-status} [n]
>
> Where up and down adjust volume in ±5 % increments
> Where up and down [n] adjust volume in ±n % increments
> Where mute toggles the mute status on/off
> Where mute-input toggles the input status on/off
> Where set set the volume to [n] %
> Where atmost only takes effect if current volume is higher than [n]
> Where full-status prints volume level, sink and source mute state to stdout
>
> Optionally, redefine an upper threshold in /home/timk/.config/pulseaudio-ctl/config
>
> Volume level : 17 %
> Is sink muted : no
> Is source muted : no
> Detected sink : 0
> Detected source : 0