Inko
29 July 2022 13:51
1
Hello, after today’s update, under KDE Plasma Wayland all notifications appear in the upper left corner of the main screen (I have a 2 monitors setup) although they are set to lower right. The menu X and application launcher (start menu) also appear in the upper left corner of the main screen also the start menu of the 2nd screen appears there. All tolltips from the systremtray icons appear at the top of the screen(see screenshots).
This was not the case before today’s update.
System:
Host: Manjaro Kernel: 5.18.14-1-MANJARO arch: x86_64 bits: 64
Desktop: KDE Plasma v: 5.24.6 Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: Micro-Star model: MPG X570 GAMING PLUS (MS-7C37) v: 2.0
serial: <superuser required> UEFI: American Megatrends LLC. v: A.H0
date: 05/19/2022
CPU:
Info: 8-core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP cache:
L2: 4 MiB
Speed (MHz): avg: 2875 min/max: 2200/4426 cores: 1: 3119 2: 2967 3: 2069
4: 2491 5: 2857 6: 4106 7: 2121 8: 3420 9: 3054 10: 2122 11: 2096 12: 3482
13: 2346 14: 4156 15: 2108 16: 3501
Graphics:
Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]
driver: amdgpu v: kernel
Display: wayland server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.3
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon gpu: amdgpu resolution: 1: 2560x1440
2: 1920x1080
OpenGL: renderer: AMD Radeon RX 5700 XT (navi10 LLVM 14.0.6 DRM 3.46
5.18.14-1-MANJARO) v: 4.6 Mesa 22.1.4
Audio:
Device-1: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series]
driver: snd_hda_intel
Device-2: AMD Navi 10 HDMI Audio driver: snd_hda_intel
Device-3: AMD Starship/Matisse HD Audio driver: snd_hda_intel
Device-4: DCMT USB Condenser Microphone type: USB
driver: hid-generic,snd-usb-audio,usbhid
Device-5: Kingston HyperX 7.1 Audio type: USB
driver: hid-generic,snd-usb-audio,usbhid
Sound Server-1: ALSA v: k5.18.14-1-MANJARO running: yes
Sound Server-2: PulseAudio v: 16.1 running: yes
Sound Server-3: PipeWire v: 0.3.56 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8168
IF: enp39s0 state: up speed: 1000 Mbps duplex: full
mac: xxx
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
driver: btusb
Report: rfkill ID: hci0 state: up address: see --recommends
Drives:
Local Storage: total: 7.5 TiB used: 2.37 TiB (31.6%)
ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 250GB size: 232.89 GiB
ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
ID-3: /dev/sdc vendor: Seagate model: ST2000LX001-1RG174 size: 1.82 TiB
ID-4: /dev/sdd vendor: Western Digital model: WD40EZRZ-00GXCB0
size: 3.64 TiB
ID-5: /dev/sde vendor: Samsung model: HD103UJ size: 931.51 GiB
Partition:
ID-1: / size: 491.08 GiB used: 118.19 GiB (24.1%) fs: ext4 dev: /dev/sdb1
ID-2: /boot/efi size: 96 MiB used: 25.9 MiB (27.0%) fs: vfat
dev: /dev/sda1
ID-3: /home size: 1.92 TiB used: 1.56 TiB (81.2%) fs: ext4 dev: /dev/sdd3
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 37.0 C mobo: 32.0 C gpu: amdgpu temp: 51.0 C
Fan Speeds (RPM): fan-1: 746 fan-2: 1685 fan-3: 670 fan-4: 0 fan-5: 444
fan-6: 466 fan-7: 0 gpu: amdgpu fan: 1006
Info:
Processes: 404 Uptime: 9m Memory: 31.27 GiB used: 5.26 GiB (16.8%)
Shell: fish inxi: 3.3.20
1 Like
Tomek
29 July 2022 14:06
2
Same here. I have 2 monitors, menu and taskbar on right monitor (my main monitor), but both appears on left corner of left monitor. Except this visual change, everything works correctly.
nfp0
29 July 2022 14:34
3
Same problem here. I’m also on Wayland.
I have 2 monitors and my task bar is vertical on the left side of the left (main) monitor.
lwi19
29 July 2022 14:44
4
Since this morning, the last update seem to work perfectly except for the position on the monitor of the menu and the notification. They appear on the top left. of my second monitor.
There is some discussion in the stable update thread saying this is due to Wayland.
Are you on Wayland or X11?
See this related thread:
KDE, Wayland. One monitor 1920x1080, menu and all notifications show up on the top-left corner of my screen. need a solution, please.
I found a workaround, shared it in the update thread .
Hello,
I’m facing issue here after update, KDE Plasma Menu is now placed wrongly in the middle of desktop.
System:
Kernel: 5.18.14-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-5.18-x86_64
root=UUID=69678a39-1940-48ee-8d02-88e765985137 rw rootflags=subvol=@ quiet
apparmor=1 security=apparmor
resume=UUID=b136d668-4460-4cf7-9211-93b9a5283ab3 udev.log_priority=3
Desktop: KDE Plasma v: 5.24.6 tk: Qt v: 5.15.5 wm: kwin_wayland vt: 2
dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: N/A model: X99 serial: <superuser required>
UEFI: American Megatrends v: 5.11 date: 07/30/2021
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 15.53 GiB used: 2.07 GiB (13.4%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: Intel Xeon E5-2640 v3 bits: 64 type: MT MCP arch: Haswell
built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3F (63) stepping: 2
microcode: 0x49
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB
L3: 20 MiB desc: 1x20 MiB
Speed (MHz): avg: 1388 high: 2743 min/max: 1200/3400 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1412 2: 1198 3: 1197
4: 2743 5: 1197 6: 1199 7: 1197 8: 1198 9: 1502 10: 1451 11: 1198 12: 1849
13: 1197 14: 1198 15: 1197 16: 1287 bogomips: 83046
Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2
bts clflush cmov constant_tsc cpuid cpuid_fault cqm cqm_llc cqm_occup_llc
cx16 cx8 dca de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c
flexpriority flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs ida intel_ppin
invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe msr
mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good sdbg sep smep smx
ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt
xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Micro-Star MSI driver: amdgpu v: kernel arch: GCN-4
code: Arctic Islands process: GF 14nm built: 2016-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 ports: active: DVI-D-1 empty: DP-1, DP-2, DP-3,
HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:67df class-ID: 0300
Display: wayland server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.3
compositor: kwin_wayland driver: X: loaded: amdgpu unloaded: modesetting
alternate: fbdev,vesa gpu: amdgpu display-ID: 0
Monitor-1: DVI-D-1 res: 1920x1080 size: N/A modes: N/A
OpenGL: renderer: AMD Radeon RX 570 Series (polaris10 LLVM 14.0.6 DRM 3.46
5.18.14-1-MANJARO) v: 4.6 Mesa 22.1.4 direct render: Yes
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
class-ID: 0403
Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3
speed: 8 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:aaf0 class-ID: 0403
Sound Server-1: ALSA v: k5.18.14-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: yes
Sound Server-4: PipeWire v: 0.3.56 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000
bus-ID: 06:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 2.73 TiB used: 1.74 TiB (63.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: WD Blue
SN570 500GB size: 465.76 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: 234100WD
temp: 32.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Western Digital
model: WDS500G2B0C-00PXH0 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 233010WD temp: 30.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD20PURZ-85GU6Y0 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: 0A80 scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 448.38 GiB size: 448.38 GiB (100.00%) used: 209.92 GiB
(46.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2 label: LINUX
uuid: 69678a39-1940-48ee-8d02-88e765985137
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 568 KiB
(0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: NO_LABEL
uuid: CDC5-157E
ID-3: /home raw-size: 448.38 GiB size: 448.38 GiB (100.00%) used: 209.92
GiB (46.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2 label: LINUX
uuid: 69678a39-1940-48ee-8d02-88e765985137
ID-4: /home/<filter>/GAMES raw-size: 465.76 GiB size: 457.38 GiB (98.20%)
used: 38.02 GiB (8.3%) fs: ext4 dev: /dev/nvme1n1p1 maj-min: 259:5
label: GAMES uuid: 9467047a-a0d0-46ff-859d-67a1bfff2456
ID-5: /home/<filter>/HDD-2TB raw-size: 1.82 TiB size: 1.79 TiB (98.37%)
used: 1.5 TiB (83.8%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: 2TB-EXT4
uuid: b9d4d0f9-d1ce-425d-8fe4-e2f830005289
ID-6: /var/cache raw-size: 448.38 GiB size: 448.38 GiB (100.00%)
used: 209.92 GiB (46.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: LINUX uuid: 69678a39-1940-48ee-8d02-88e765985137
ID-7: /var/log raw-size: 448.38 GiB size: 448.38 GiB (100.00%) used: 209.92
GiB (46.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2 label: LINUX
uuid: 69678a39-1940-48ee-8d02-88e765985137
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 17.09 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3 label: swap
uuid: b136d668-4460-4cf7-9211-93b9a5283ab3
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8008 class-ID: 0900
Hub-3: 2-0:1 info: Full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8000 class-ID: 0900
Hub-5: 3-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-7:2 info: Pixart Imaging Optical Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
power: 100mA chip-ID: 093a:2521 class-ID: 0301
Device-2: 3-8:3 info: SINO WEALTH USB KEYBOARD type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s
power: 100mA chip-ID: 258a:0001 class-ID: 0300
Hub-6: 4-0:1 info: Super-speed hub ports: 6 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 26.0 C mobo: N/A gpu: amdgpu temp: 51.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 185
Info:
Processes: 379 Uptime: 4m wakeups: 0 Init: systemd v: 251 default: graphical
tool: systemctl Compilers: gcc: 12.1.0 clang: 14.0.6 Packages: 1525
pacman: 1503 lib: 418 flatpak: 22 Shell: Zsh v: 5.9 default: Bash v: 5.1.16
running-in: konsole inxi: 3.3.20
Zesko
29 July 2022 15:33
10
Try to delete KDE menu, then add the same KDE menu.
nfp0
29 July 2022 20:59
11
An update to qt5-wayland has landed that fixes the issue. Update your Manjaro and no workaround is needed.
5 Likes
Thank, mine was fixed with the updated.
lwi19
7 August 2022 15:33
13
Fixed for me after the minor update of Qt5
